Download or read book Structural Physics of Nuclear Fusion written by Stoyan Sarg and published by Createspace Independent Pub. This book was released on 2013-04-07 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Remarkable advances in cold fusion experiments have raised the hope for a safer and cheaper nuclear energy. The results, however, cannot be explained from the point of view of current physical understanding of nuclear fusion. This is an obstacle to endorsement and investment in this field. The research needs a supporting theory. The present book suggests a new approach for analysis of the results and offers practical recommendations based on the physical models of atomic nuclei derived in the BSM-Supergravitation Unified theory (BSM-SG). The book provides: (1) a method for analysis of the LENR experiments using the BSM-SG atomic models; (b) a selection of isotopes suitable for a more efficient energy yield with a minimum of radioactive byproducts; (c) practical considerations for selection of the technical method and the reaction environment.The BSM-SG theory is based on a concept of space that follows the view of Michael Faraday and the recommendations of James Maxwell about the properties of the envisioned space medium, known as Aether. The concept of an Aether (Ether) was abandoned in favor of the quantum mechanical formalism adopted in the first quarter of 20th century. However, Albert Einstein was against this approach and openly expressed his concerns after he developed General Relativity. In his monograph “Sidelights on relativity” (1921) he wrote: “To deny the ether is ultimately to assume that empty space has no physical qualities whatever” (p.23) and “According to general theory of relativity space without ether is unthinkable” (p. 23).From our point of view, the major problem for recognition of the feasibility of LENR is the adopted quantum mechanical formalism. In quantum mechanics and particles physics, all elementary and subelementary particles are assumed spherical without any geometrical structure. Then the data interpretation of scattering experiments leads to a very small atomic nucleus on the order of a femtometer. This leads to a conclusion of a very strong Coulomb barrier that might be overcome only at temperatures of millions of degrees. The results from LENR experiments are in a sharp contrast to this consideration. According to BSM-SG theory, the physical models of protons and neutrons have superdense material structures with the shape of a folded and a twisted torus, respectively. They are much larger but thinner, so the Coulomb barrier also has a non-spherical shape and it is not so strong. The protons and neutrons are held in the nucleus by a Supergravitational (SG) field, which is behind the strong nuclear forces. The protons and neutrons in the atomic nuclei form three-dimensional fractal structures. The spatial geometry of the nuclear structures defines the row-column pattern of the periodic table with identifiable features of the valences, isotope stability, nuclear spin and chemical bond directions. The analysis leads to a hypothesis that the superdense nucleus causes a micro-curvature – a general relativistic effect around the nucleus. It has a feature of energy storage that corresponds to the mass deficit or nuclear binding energy expressed by Einstein's equation, E = mc^2. The fusion or fission reaction causes a small change of the micro-curvature, so the difference in the binding energy is released as gamma and particle radiation that is finally converted to heat.The analysis of some LENR experiments shows that the excited state of hydrogen and deuterium, known as the Rydberg state, facilitates some fusion reactions. According to BSM-SG, the Rydberg state is an ion-electron pair, with a finite size at the boundary of the SG field, while possessing a strong magnetic field due to the dominated magnetic moment of the electron. Additionally, the anomalous magnetic moment of the electron provides a constant driving momentum. When combined with a proper nuclear spin state of a selected heavier element, this momentum assists the magnetic field interactions, and this leads to nuclear fusion.
Download or read book Fundamentals in Nuclear Physics written by Jean-Louis Basdevant and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers all the phenomenological and experimental data on nuclear physics and demonstrates the latest experimental developments that can be obtained. Introduces modern theories of fundamental processes, in particular the electroweak standard model, without using the sophisticated underlying quantum field theoretical tools. Incorporates all major present applications of nuclear physics at a level that is both understandable by a majority of physicists and scientists of many other fields, and usefull as a first introduction for students who intend to pursue in the domain.
Download or read book Structural Alloys for Nuclear Energy Applications written by Robert Odette and published by Newnes. This book was released on 2019-08-15 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-performance alloys that can withstand operation in hazardous nuclear environments are critical to presentday in-service reactor support and maintenance and are foundational for reactor concepts of the future. With commercial nuclear energy vendors and operators facing the retirement of staff during the coming decades, much of the scholarly knowledge of nuclear materials pursuant to appropriate, impactful, and safe usage is at risk. Led by the multi-award winning editorial team of G. Robert Odette (UCSB) and Steven J. Zinkle (UTK/ORNL) and with contributions from leaders of each alloy discipline, Structural Alloys for Nuclear Energy Applications aids the next generation of researchers and industry staff developing and maintaining steels, nickel-base alloys, zirconium alloys, and other structural alloys in nuclear energy applications. This authoritative reference is a critical acquisition for institutions and individuals seeking state-of-the-art knowledge aided by the editors’ unique personal insight from decades of frontline research, engineering and management. Focuses on in-service irradiation, thermal, mechanical, and chemical performance capabilities. Covers the use of steels and other structural alloys in current fission technology, leading edge Generation-IV fission reactors, and future fusion power reactors. Provides a critical and comprehensive review of the state-of-the-art experimental knowledge base of reactor materials, for applications ranging from engineering safety and lifetime assessments to supporting the development of advanced computational models.
Download or read book University Physics written by OpenStax and published by . This book was released on 2016-11-04 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: University Physics is a three-volume collection that meets the scope and sequence requirements for two- and three-semester calculus-based physics courses. Volume 1 covers mechanics, sound, oscillations, and waves. Volume 2 covers thermodynamics, electricity and magnetism, and Volume 3 covers optics and modern physics. This textbook emphasizes connections between between theory and application, making physics concepts interesting and accessible to students while maintaining the mathematical rigor inherent in the subject. Frequent, strong examples focus on how to approach a problem, how to work with the equations, and how to check and generalize the result. The text and images in this textbook are grayscale.
Download or read book Nuclear Structure Physics written by Amritanshu Shukla and published by CRC Press. This book was released on 2020-10-22 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear structure Physics connects to some of our fundamental questions about the creation of universe and its basic constituents. At the same time, precise knowledge on the subject has lead to develop many important tools of human kind such as proton therapy, radioactive dating etc. This book contains chapters on some of the crucial and trending research topics in nuclear structure, including the nuclei lying on the extremes of spin, isospin and mass. A better theoretical understanding of these topics is important beyond the confines of the nuclear structure community. Additionally, the book will showcase the applicability and success of the different nuclear effective interaction parameters near the drip line, where hints for level reordering have already been seen, and where one can test the isospin-dependence of the interaction. The book offers comprehensive coverage of the most essential topics, including: • Nuclear Structure of Nuclei at or Near Drip-Lines • Synthesis challenges and properties of Superheavy nuclei • Nuclear Structure and Nuclear models - Ab-initio calculations, cluster models, Shell-model/DSM, RMF, Skyrme • Shell Closure, Magicity and other novel features of nuclei at extremes • Structure of Toroidal, Bubble Nuclei, halo and other exotic nuclei These topics are not only very interesting from theoretical nuclear physics perspective but are also quite complimentary for ongoing nuclear physics experimental program worldwide. It is hoped that the book chapters written by experienced and well known researchers/experts will be helpful for the master students, graduate students and researchers and serve as a standard & uptodate research reference book on the topics covered.
Download or read book Quantum Mechanics for Nuclear Structure written by Kris L. G. Heyde and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, the first of a two-volume set, provides a comprehensive introduction to quantum mechanics for advanced undergraduate and postgraduate students entering the field of nuclear structure studies via two-state systems: both polarized photons and spin-1/2 particles. This leads to the logic behind the physical structure and an axiomatic formulation using linear spaces and operators. The one-dimensional harmonic oscillator is used to illustrate the mechanics of quantized systems, reaching to time dependence and coherent states. Measurement theory is introduced. The transformation theory of space and time leads to wave functions. The role of group theory and rotations then leads to the quantization of angular momentum. Central force problems are handled algebraically. The development is completed with quantization of motion of a charged particle in a magnetic field. Part of IOP Series in Nuclear Spectroscopy and Nuclear Structure.
Download or read book Computational Nuclear Physics 1 written by K. Langanke and published by Springer Science & Business Media. This book was released on 2013-11-22 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: A variety of standard problems in theoretical nuclear-structure physics is addressed by the well-documented computer codes presented in this book. Most of these codes were available up to now only through personal contact. The subject matter ranges from microscopic models (the shell, Skyrme-Hartree-Fock, and cranked Nilsson models) through collective excitations (RPA, IBA, and geometric model) to the relativistic impulse approximation, three-body calculations, variational Monte Carlo methods, and electron scattering. The 5 1/4'' high-density floppy disk that comes with the book contains the FORTRAN codes of the problems that are tackled in each of the ten chapters. In the text, the precise theoretical foundations and motivations of each model or method are discussed together with the numerical methods employed. Instructions for the use of each code, and how to adapt them to local compilers and/or operating systems if necessary, are included.
Download or read book Physics and Technology of Nuclear Materials written by Ioan Ursu and published by Elsevier. This book was released on 2015-08-03 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics and Technology of Nuclear Materials presents basic information regarding the structure, properties, processing methods, and response to irradiation of the key materials that fission and fusion nuclear reactors have to rely upon. Organized into 12 chapters, this book begins with selectively several fundamentals of nuclear physics. Subsequent chapters focus on the nuclear materials science; nuclear fuel; structural materials; moderator materials employed to ""slow down"" fission neutrons; and neutron highly absorbent materials that serve in reactor's power control. Other chapters explore the cooling agents; fluids carrying the energy to its final stage of conversion into electric power; thermal and biological shielding materials; some outstanding reactor components; and irradiated fuel reprocessing. The last two chapters deal with nuclear material quality inspection by destructive and non-destructive methods, and specific materials envisaged for use in future thermonuclear reactors. This monograph will be helpful for a wide range of specialists wishing to gear their research and development, education, and other activities toward the field of nuclear power and nuclear technology.
Download or read book Advances in Nuclear Physics written by Rajeev K. Puri and published by Springer Nature. This book was released on 2020-12-15 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select peer-reviewed papers from the Indo-French Workshop on Multifragmentation, Collective Flow, and Sub-Threshold Particle Production in Heavy-Ion Reactions held at the Department of Physics, Panjab University, Chandigarh, India in February, 2019. The contents highlight latest research trends in intermediate energy nuclear physics and emphasize on the various reaction mechanisms which take place in heavy-ion collisions. The chapters contribute to the understanding of interactions that govern the dynamics at sub-nucleonic level. The book includes contributions from global experts hailing from major research facilities of nuclear physics, and provides a good balance between experimental and theoretical model based studies. Given the range of topics covered, this book can be a useful reference for students and researchers interested in the field of heavy-ion reactions.
Download or read book Modern Nuclear Physics written by Alexandre Obertelli and published by Springer Nature. This book was released on 2021-09-25 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is a unique and ambitious primer of nuclear physics, which introduces recent theoretical and experimental progresses starting from basics in fundamental quantum mechanics. The highlight is to offer an overview of nuclear structure phenomena relevant to recent key findings such as unstable halo nuclei, superheavy elements, neutron stars, nucleosynthesis, the standard model, lattice quantum chromodynamics (LQCD), and chiral effective theory. An additional attraction is that general properties of nuclei are comprehensively explained from both the theoretical and experimental viewpoints. The book begins with the conceptual and mathematical basics of quantum mechanics, and goes into the main point of nuclear physics – nuclear structure, radioactive ion beam physics, and nuclear reactions. The last chapters devote interdisciplinary topics in association with astrophysics and particle physics. A number of illustrations and exercises with complete solutions are given. Each chapter is comprehensively written starting from fundamentals to gradually reach modern aspects of nuclear physics with the objective to provide an effective description of the cutting edge in the field.
Download or read book Fusion Reactor Design written by Takashi Okazaki and published by John Wiley & Sons. This book was released on 2022-03-14 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fusion Reactor Design Provides a detailed overview of fusion reactor design, written by an international leader in the field Nuclear fusion—generating four times as much energy from the same mass of fuel as nuclear fission—is regarded by its proponents as a viable, eco-friendly alternative to gas-fired, coal-fired, and conventional power plants. Although the physics of nuclear fusion is essentially understood, the construction of prototype reactors currently presents significant technical challenges. Fusion Reactor Design: Plasma Physics, Fuel Cycle System, Operation and Maintenance provides a systematic, reader-friendly introduction to the characteristics, components, and critical systems of fusion reactors. Focusing on the experimental Tokamak reactor, this up-to-date resource covers relevant plasma physics, necessary technology, analysis methods, and the other aspects of fusion reactors. In-depth chapters include derivations of key formulas, figures highlighting physical and structural characteristics of fusion reactors, illustrative numerical calculations, practical design examples, and more. Designed to help researchers and engineers understand and overcome the technological difficulties in making fusion power a reality, this volume: Provides in-depth knowledge on controlled thermonuclear fusion and its large-scale application in both current fusion reactors and future test reactors Covers plasma analysis, plasma equilibrium and stability, and plasma transport and confinement, and safety considerations Explains each component of fusion reactors, including divertors, superconducting coils, plasma heating and current drive systems, and vacuum vessels Discusses safety aspects of fusion reactors as well as computational approaches to safety aspects of fusion reactors Fusion Reactor Design: Plasma Physics, Fuel Cycle System, Operation and Maintenance is required reading for undergraduate and graduate students studying plasma physics and fusion reactor technology, and an important reference for nuclear physicists, nuclear reactor manufacturers, and power engineers involved in fusion reactor research and advanced technology development.
Download or read book Research Trends 1962 1967 Nuclear Structure Physics written by National Science Foundation (U.S.). Advisory Panel on Nuclear Structure Physics and published by . This book was released on 1962 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
- Author : Archie A Harms
- Publisher : World Scientific Publishing Company
- Release : 2000-06-15
- ISBN : 981310273X
- Pages : 309 pages
Principles Of Fusion Energy An Introduction To Fusion Energy For Students Of Science And Engineering
Download or read book Principles Of Fusion Energy An Introduction To Fusion Energy For Students Of Science And Engineering written by Archie A Harms and published by World Scientific Publishing Company. This book was released on 2000-06-15 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook accommodates the two divergent developmental paths which have become solidly established in the field of fusion energy: the process of sequential tokamak development toward a prototype and the need for a more fundamental and integrative research approach before costly design choices are made.Emphasis is placed on the development of physically coherent and mathematically clear characterizations of the scientific and technological foundations of fusion energy which are specifically suitable for a first course on the subject. Of interest, therefore, are selected aspects of nuclear physics, electromagnetics, plasma physics, reaction dynamics, materials science, and engineering systems, all brought together to form an integrated perspective on nuclear fusion and its practical utilization.The book identifies several distinct themes. The first is concerned with preliminary and introductory topics which relate to the basic and relevant physical processes associated with nuclear fusion. Then, the authors undertake an analysis of magnetically confined, inertially confined, and low-temperature fusion energy concepts. Subsequently, they introduce the important blanket domains surrounding the fusion core and discuss synergetic fusion-fission systems. Finally, they consider selected conceptual and technological subjects germane to the continuing development of fusion energy systems.
Download or read book Nuclear Power Safety written by James H. Rust and published by Elsevier. This book was released on 2013-10-22 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise and current treatment of the subject of nuclear power safety, this work addresses itself to such issues of public concern as: radioactivity in routine effluents and its effect on human health and the environment, serious reactor accidents and their consequences, transportation accidents involving radioactive waste, the disposal of radioactive waste, particularly high-level wastes, and the possible theft of special nuclear materials and their fabrication into a weapon by terrorists. The implementation of the defense-in-depth concept of nuclear power safety is also discussed. Of interest to all undergraduate and graduate students of nuclear engineering, this work assumes a basic understanding of scientific and engineering principles and some familiarity with nuclear power reactors
Download or read book Nuclear Alternative written by William L. Stubbs and published by Xlibris Corporation. This book was released on 2008-06-12 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Standard Model has been the model of choice for nuclear structure since the late 1960s. However, 40 years later, scientists are still struggling to validate it. Nuclear Alternative offers an alternative explanation for the structure of matter that uses particles and forces observed and characterized since the 1930s. By redesigning the models of the proton, neutron, and electron, and developing a nuclear binding mechanism similar to covalent bonds in atoms, the book systematically develops models for more than 250 stable nuclei. It then uses the models to explain alpha and beta decay, and nuclear fission and fusion.
Download or read book Advances in Time Dependent Methods for Nuclear Structure and Dynamics written by Paul Denis Stevenson and published by Frontiers Media SA. This book was released on 2021-03-08 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Physics written by National Research Council and published by National Academies Press. This book was released on 1999-03-31 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dramatic progress has been made in all branches of physics since the National Research Council's 1986 decadal survey of the field. The Physics in a New Era series explores these advances and looks ahead to future goals. The series includes assessments of the major subfields and reports on several smaller subfields, and preparation has begun on an overview volume on the unity of physics, its relationships to other fields, and its contributions to national needs. Nuclear Physics is the latest volume of the series. The book describes current activity in understanding nuclear structure and symmetries, the behavior of matter at extreme densities, the role of nuclear physics in astrophysics and cosmology, and the instrumentation and facilities used by the field. It makes recommendations on the resources needed for experimental and theoretical advances in the coming decade.