Download or read book Structural Design of Low rise Buildings Code of Practice for Stability Site Investigation Foundations and Ground Floor Slabs for Housing written by British Standards Institute Staff and published by . This book was released on 1995-09-15 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: Buildings, Housing, Structural design, Design, Structural systems, Masonry work, Stability, Site investigations, Foundations, Strip foundations, Footings, Concretes, Slab floors, Dimensions, Shape, Wind loading, Loading, Walls, Loadbearing walls, Structural members
Download or read book Structural Design of Low Rise Buildings Code of Practice for Stability Site Investigation Foundations Precast Concrete Floors and Ground Floor Slabs for Housing written by British Standards Institute Staff and published by . This book was released on 1911-11-30 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: Buildings, Housing, Structural design, Design, Structural systems, Masonry work, Stability, Site investigations, Foundations, Strip foundations, Footings, Concretes, Slab floors, Suspended floors, Floors, Precast concrete, Dimensions, Shape, Wind loading, Loading, Walls, Loadbearing walls, Structural members
Download or read book Structural Design of Low rise Buildings written by British Standards Institution and published by . This book was released on 1986 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Defects Reference Manual for Low Rise Buildings written by Michael F. Atkinson and published by CRC Press. This book was released on 2014-04-21 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Structural Defects Reference Manual for Low-Rise Buildings has been written to assist professionals and students involved in building construction to identify causes of structural failure. Each chapter carefully addresses design, materials and workmanship factors which contribute to structural defects. The main structural elements - roofs, walls, floors and foundations - are all covered and illustrated by case studies. The book also contains relevant data and guidance to show how all the different building elements should be designed and constructed.
Download or read book Building Regulations in Brief written by Ray Tricker and published by Routledge. This book was released on 2014-04-16 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt: This eighth edition of the most popular and trusted guide to the building regulations is the most comprehensive revision yet. It reflects all the latest amendments to Building Regulations, Planning Permission and the Approved Documents A,B,C, H, K, P, Regulation 7 incorporating all amendments up to December 2013 (including the changes to Leaflets L1A and L2A regarding the conservation of heat and energy in new buildings which came into effect April 2014). This new edition also contains details of the new national planning guidance system and initiatives to speed up the planning process such as the new on line planning application process. It contains an updated list of fees for planning consents and provides guidance on the changes to permitted development rights in Agricultural, Business and Residential buildings which came into force on 1 October 2013. Giving practical information throughout on how to work with (and within) the regulations, this book enables compliance in the simplest and most cost-effective manner possible. The no-nonsense approach of Building Regulations in Brief cuts through the confusion and explains the meaning of the regulations; consequently it has become a favourite for anyone involved in the building industry as well as those planning to have work carried out in their home.
Download or read book ICE Manual of Geotechnical Engineering Volume 1 written by Tim Chapman and published by Emerald Group Publishing. This book was released on 2023-11-17 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICE Manual of Geotechnical Engineering, Second edition brings together an exceptional breadth of material to provide a definitive reference on geotechnical engineering solutions. Written and edited by leading specialists, each chapter provides contemporary guidance and best practice knowledge for civil and structural engineers in the field.
Download or read book Fundamental Building Technology written by Andrew J. Charlett and published by Routledge. This book was released on 2013-01-25 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental Building Technology introduces the technology, methods, and processes fundamental to construction by focussing on what is involved in building a typical low-rise house. Written with the novice in mind, this textbook is the ideal starting point for any construction student, as it fully supports the reader all the way to understanding the functional requirements of each element of the building, and how to take these into account through the building process itself. This second edition is expanded to cover even more relevant topics, and is supported by more resources for use by the student and lecturer. Now included are: An introduction to the planning process and the building regulations How to incorporate a sustainable approach, in the selection of materials and elsewhere A companion site with lecturer’s answers manual and illustrated lecture notes 150 labelled diagrams throughout the book, and multiple self-study questions in every chapter A students’ section of the companion site with multiple choice quizzes and 250 full-colour photos linked to chapters of the book Concise, focussed and the most student-friendly guide to this topic available, Fundamental Building Technology is the perfect textbook for those taking construction technology modules at undergraduate or HNC/HND level.
Download or read book Using the Building Regulations written by Mike Billington and published by Routledge. This book was released on 2012-08-21 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the Building Regulations and Approved Documents have become more and more complex, they have become increasingly unfriendly for a professional user. Compliance is only possible by understanding a wide range of supporting documentation. Alternative approaches are implied, but not described or analysed. This book examines Approved Document C on Site Preparation and takes the user through all the key stages of preparation, compliance, inspection and enforcement. It offers practical advice on using not just the traditional routes to compliance but also on the alternative approaches suggested but not explained in the Approved Documents. The advantages and disadvantages of each form of compliance are analysed in depth. Everything you need to know to prepare a site's fixtures against contamination and moisture is discussed, including floors, walls, window frames, door tresholds, and roofs. This is an indispensable text for professional designers, architects, structural and other specialist engineers, building control officers and students in construction, building and architecture.
Download or read book Chudley and Greeno s Building Construction Handbook written by Roy Chudley and published by Taylor & Francis. This book was released on 2024-05-31 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 13th edition of Chudley and Greeno’s Building Construction Handbook remains THE authoritative reference for all construction students and professionals. The principles and processes of construction are explained with the concepts of design included where appropriate. Extensive coverage of building construction practice, techniques and regulations representing both traditional procedures and modern developments are included to provide the most comprehensive and easy-to-understand guide to building construction. This new edition has been updated to reflect recent changes to the Building Regulations, as well as including new material on modern methods of construction, greater emphasis on sustainability, health and safety, and coverage of heat pumps, photovoltaics, underfloor heating and rainwater harvesting. Chudley and Greeno’s Building Construction Handbook is the essential, easy-to-use resource for undergraduate and vocational students on a wide range of courses including NVQ and BTEC National, through to Higher National Certificate and Diploma, to Foundation and three-year degree level. It is also a useful practical reference for building designers, contractors and others engaged in the construction industry.
Download or read book Using the Building Regulations written by Michael J. Billington and published by Routledge. This book was released on 2007 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the Building Regulations and Approved Documents have become more and more complex, they have become increasingly unfriendly for a professional user. Compliance is only possible by understanding a wide range of supporting documentation. Alternative approaches are implied, but not described or analysed. This book examines Approved Document C on Site Preparation and takes the user through all the key stages of preparation, compliance, inspection and enforcement. It offers practical advice on using not just the traditional routes to compliance but also on the alternative approaches suggested but not explained in the Approved Documents. The advantages and disadvantages of each form of compliance are analysed in depth. Everything you need to know to prepare a site's fixtures against contamination and moisture is discussed, including floors, walls, window frames, door tresholds, and roofs. This is an indispensable text for professional designers, architects, structural and other specialist engineers, building control officers and students in construction, building and architecture.
Download or read book The Building Regulations written by M. J. Billington and published by John Wiley & Sons. This book was released on 2017-05-01 with total page 1027 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since publication of the first edition in 1976, The Building Regulations: Explained and Illustrated has provided a detailed, authoritative, highly illustrated and accessible guide to the regulations that must be adhered to when constructing, altering or extending a building in England and Wales. This latest edition has been fully revised throughout. Much of the content has been completely rewritten to cover the substantial changes to the Regulations since publication of the 13th edition, to ensure it continues to provide the detailed guidance needed by all those concerned with building work, including architects, building control officers, Approved Inspectors, Competent Persons, building surveyors, engineers, contractors and students in the relevant disciplines.
Download or read book HAPM Workmanship Checklists written by Construction Audit Ltd. and published by CRC Press. This book was released on 1999-09-09 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: The HAPM Workmanship Checklists fills an important gap in the current information provision in the industry, providing guidance for those engaged in site inspections during the course of building works. Its unique checklist format, designed for use on site, is complimented by extensive references to sources of guidance, standards and legislative in
Download or read book Construction Technology 1 House Construction written by Mike Riley and published by Bloomsbury Publishing. This book was released on 2018-04-18 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction Technology 1: House Construction offers a highly accessible introduction to the key stages of domestic house construction from planning to internal finishes. Its student-friendly layout uses detailed figures, photos and case studies from real-life building sites to aid a practical understanding of construction techniques, providing clear step-by-step guidance in learning the basic principles of low-rise residential construction. This textbook is a vital resource for students in construction, property and architecture, BSc and MSc, including any student taking courses in building surveying, quantity surveying, real estate and construction management, as well as those studying at the HNC/HND level. New to this Edition: - The sections on off-site manufacture and modular approaches to construction have been significantly updated and expanded. The nature of house construction utilising panelised and volumetric approaches is explained with supporting case study examples and photographic illustrations. - The increased recognition of sustainability as a key element in modern house building is reflected in expanded consideration of the environmental implications of construction design and practice. - The characteristics of house form, construction and technology that impact upon thermal and environmental performance are included together with updated content relating to SAP calculations and target energy performance. - Advances in technology and evolving approaches to passive features of environmentally-conscious design are incorporated together with the introduction of issues around connected homes. - The material has been amended in line with current UK building regulations, environmental guidance and legislation including statutory control of the building process and health and safety.
Download or read book Concrete Masonry Designer s Handbook written by Anton Fried and published by CRC Press. This book was released on 2014-04-21 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new edition of a well-known and respected book. This book provides a thorough guide for structural engineers on the use of concrete masonry. The second edition of the Concrete Masonry Designer's Handbook is the only handbook to provide information on all the new CEN TC125 masonry standards, as well as detailed guidance on design to Eurocode 6. Th
Download or read book Building Adaptation written by James Douglas and published by Routledge. This book was released on 2006 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction; Feasibility; Principles of Building Conversion; Adaptive fuses; Lateral extensions; Vertical extensions; Structural alterations; Principles of refurbishment; Further aspects of refurbishment; Sustainable adaptation; Implementation; Appendices.
Download or read book Building Regulations Explained written by London District Surveyors Association and published by Routledge. This book was released on 2013-08-06 with total page 1908 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost all buildings erected or altered in England and Wales must satisfy the requirements of the building regulations. This essential reference has been revised in line with new legislation up to January 2004, including important revisions to Parts B, E, H, J, L1, L2, and M and an outline of the proposed Part P. Each chapter explains in clear terms the appropriate regulation and any other legislation, before explaining the approved document. The Appeals and Determinations have been repositioned at the end of each chapter. Publications lists and relevant sources of information are also included, together with annexes devoted to legislation relevant to the construction industry, determinations made by the Secretary of State, and sample check lists. This highly illustrated and practical approach to the subject makes this the indispensable, one-stop reference guide for professionals and students.
Download or read book The Architects Journal written by and published by . This book was released on 1995 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt:
