Download or read book Metal Forming Interrelation Between Theory and Practice written by A. L. Hoffmanner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: On October 21 and 22, 1970, the Shaping and Forming Committee, Institute of Metals Division, The Metallurgical Society of AlME, held a Conference on "The Relation Between Theory and Practice it). Metal Forming" at the Sheraton-Cleveland Hotel during the Fall Meeting of AIME in Cleveland, Ohio. This conference was devoted to recent applications of theory to metal forming to establish a milestone in the current ability to predict phenomena during deformation processing and, thereby, demonstrate the utility of theory for process design. The papers were selected by first requesting presentations of relevant recent work from 68 recognized authorities in metal forming which resulted in 17 papers. A sub sequent call for papers resulted in the submission of 19 abstracts from which 4 papers were selected. The selection criteria required that the paper coupled theory with practice, and that the work was recent, unpublished and worthy of permanent record. The selection was performed by the Conference Chairman. The papers in this volume have been organized in accordance with the following subjects: Extrusion Drawing and Sheet Metal Forming Forming Loads and Friction Workability These papers appear to assess the salient recent applications of mechanics to the deformation processing of alloys at the present time, i. e. , circa 1970, A, L. Hoffmanner Conference Chairman May, 1970 vii LIST OF CONTRIBUTORS Taylan Altan, Metalworking Division, Columbus Laboratories, Battelle Memorial Institute, Columbus, Ohio W. A.

Download or read book U S Government Research Reports written by and published by . This book was released on 1964 with total page 1416 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Deformation Processing written by F. W. Boulger and published by . This book was released on 1967 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: As part of the Metalworking Processes and Equipment Program, information was collected on deformation characteristics of metals and their effect on processing operations. The report presents the information collected from technical engineering reports on Government contracts and from general engineering and metallurgical publications. The objective is to help the nonspecialist in recognizing the implications of scientific findings and in applying them in specific operations. This report contains a series of articles covering the following subjects: Ductile Fracture; Application of High Pressure to the Forming of Brittle Metals; Superplasticity; Lubrication in Metal-Deformation Processes; Swaging; Adiabatic Conditions in Deformation Processing; Residual Stresses produced by Deformation. These subjects are treated in two ways: (1) generalized discussions of common processes point out why specific variables must be modified in order to deform certain types of metals satisfactorily; and (2) data on the more difficult-to-form metals are used to illustrate the principles, limitations, and effects of the processes. (Author).

Download or read book Government wide Index to Federal Research Development Reports written by and published by . This book was released on 1967 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Comprehensive Structural Integrity written by Ian Milne and published by Elsevier. This book was released on 2003-07-25 with total page 4647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this major reference work is to provide a first point of entry to the literature for the researchers in any field relating to structural integrity in the form of a definitive research/reference tool which links the various sub-disciplines that comprise the whole of structural integrity. Special emphasis will be given to the interaction between mechanics and materials and structural integrity applications. Because of the interdisciplinary and applied nature of the work, it will be of interest to mechanical engineers and materials scientists from both academic and industrial backgrounds including bioengineering, interface engineering and nanotechnology. The scope of this work encompasses, but is not restricted to: fracture mechanics, fatigue, creep, materials, dynamics, environmental degradation, numerical methods, failure mechanisms and damage mechanics, interfacial fracture and nano-technology, structural analysis, surface behaviour and heart valves. The structures under consideration include: pressure vessels and piping, off-shore structures, gas installations and pipelines, chemical plants, aircraft, railways, bridges, plates and shells, electronic circuits, interfaces, nanotechnology, artificial organs, biomaterial prostheses, cast structures, mining... and more. Case studies will form an integral part of the work.

Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fracture of Nano and Engineering Materials and Structures written by E.E. Gdoutos and published by Springer Science & Business Media. This book was released on 2008-01-08 with total page 1452 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 16th European Conference of Fracture (ECF16) was held in Greece, July, 2006. It focused on all aspects of structural integrity with the objective of improving the safety and performance of engineering structures, components, systems and their associated materials. Emphasis was given to the failure of nanostructured materials and nanostructures including micro- and nano-electromechanical systems (MEMS and NEMS).

Download or read book Damage Mechanics in Metal Forming written by Khemais Saanouni and published by John Wiley & Sons. This book was released on 2013-02-04 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to summarize the current most effective methods for modeling, simulating, and optimizing metal forming processes, and to present the main features of new, innovative methods currently being developed which will no doubt be the industrial tools of tomorrow. It discusses damage (or defect) prediction in virtual metal forming, using advanced multiphysical and multiscale fully coupled constitutive equations. Theoretical formulation, numerical aspects as well as application to various sheet and bulk metal forming are presented in detail. Virtual metal forming is nowadays inescapable when looking to optimize numerically various metal forming processes in order to design advanced mechanical components. To do this, highly predictive constitutive equations accounting for the full coupling between various physical phenomena at various scales under large deformation including the ductile damage occurrence are required. In addition, fully 3D adaptive numerical methods related to time and space discretization are required in order to solve accurately the associated initial and boundary value problems. This book focuses on these two main and complementary aspects with application to a wide range of metal forming and machining processes. Contents 1. Elements of Continuum Mechanics and Thermodynamics. 2. Thermomechanically-Consistent Modeling of the Metals Behavior with Ductile Damage. 3. Numerical Methods for Solving Metal Forming Problems. 4. Application to Virtual Metal Forming.

Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.

Download or read book Structural and Functional Advanced Materials written by Cecilia Poletti and published by Trans Tech Publications Ltd. This book was released on 2024-05-14 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer-reviewed papers only

Download or read book Modelling and Simulation of Sheet Metal Forming Processes written by Marta C. Oliveira and published by MDPI. This book was released on 2020-04-22 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The numerical simulation of sheet metal forming processes has become an indispensable tool for the design of components and their forming processes. This role was attained due to the huge impact in reducing time to market and the cost of developing new components in industries ranging from automotive to packing, as well as enabling an improved understanding of the deformation mechanisms and their interaction with process parameters. Despite being a consolidated tool, its potential for application continues to be discovered with the continuous need to simulate more complex processes, including the integration of the various processes involved in the production of a sheet metal component and the analysis of in-service behavior. The quest for more robust and sustainable processes has also changed its deterministic character into stochastic to be able to consider the scatter in mechanical properties induced by previous manufacturing processes. Faced with these challenges, this Special Issue presents scientific advances in the development of numerical tools that improve the prediction results for conventional forming process, enable the development of new forming processes, or contribute to the integration of several manufacturing processes, highlighting the growing multidisciplinary characteristic of this field.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1985 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sheet Metal Forming Processes written by Dorel Banabic and published by Springer Science & Business Media. This book was released on 2010-06-21 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of virtual manufacturing has been developed in order to increase the industrial performances, being one of the most ef cient ways of reducing the m- ufacturing times and improving the quality of the products. Numerical simulation of metal forming processes, as a component of the virtual manufacturing process, has a very important contribution to the reduction of the lead time. The nite element method is currently the most widely used numerical procedure for s- ulating sheet metal forming processes. The accuracy of the simulation programs used in industry is in uenced by the constitutive models and the forming limit curves models incorporated in their structure. From the above discussion, we can distinguish a very strong connection between virtual manufacturing as a general concept, ?nite element method as a numerical analysis instrument and constitutive laws,aswellas forming limit curves as a speci city of the sheet metal forming processes. Consequently, the material modeling is strategic when models of reality have to be built. The book gives a synthetic presentation of the research performed in the eld of sheet metal forming simulation during more than 20 years by the members of three international teams: the Research Centre on Sheet Metal Forming—CERTETA (Technical University of Cluj-Napoca, Romania); AutoForm Company from Zürich, Switzerland and VOLVO automotive company from Sweden. The rst chapter presents an overview of different Finite Element (FE) formu- tions used for sheet metal forming simulation, now and in the past.

Download or read book Comprehensive Structural Integrity written by I. Milne and published by Elsevier. This book was released on 2003 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ninth Status Report of the U S Government Metalworking Processes and Equipment Program written by F. C. Holden and published by . This book was released on 1968 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sixth Status Report of the U S Government Metalworking Processes and Equipment Program written by F. C. Holden and published by . This book was released on 1966 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: