Download or read book Structural Concrete written by and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Concrete Volume 3 written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2010 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) tofib Model Code 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the Textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated Textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the Textbook.
Download or read book Structural Concrete Textbook Vol 3 first edition written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 1999 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of reinforced and prestressed concrete during the last 50 years was highly promoted by the ”Comité Euro-international du Béton (CEB)“ and the ”Fédération Internationale de la Précontrainte (FIP)“. In 1998 these two associations merged, forming the ”Fédération Internationale du Béton (fib)“. The results of CEB and FIP had been distributed in different ways, such as 'CEB Bulletins d'Information', FIP–Reports, FIP–Notes and CEB–News. These Bulletins or reports comprised various kinds of information, such as State-of-the-Art-Reports, Research Reports, Application Manuals, Guides to Good Practice and the CEB/FIP Model Codes 1978 and 1990. These Model Codes provided design principles and application rules to the structural engineering profession and have been predominantly used for code drafting by many national and international standardizing bodies. The Textbook on Structural Concrete is now intended to provide background information and justification especially for the CEB/FIP Model Code 90 and in some fields of recently extended knowledge. It is addressed to advanced students: this means that basic information on structural analysis and behaviour of structural concrete is a required prerequisite. Practising structural engineers may utilize it for gaining background information on the CEB/FIP Model Code 90 (and national or regional codes as for ex. EUROCODE 2, based on MC 90). The Textbook is also conceived to assist teachers at technical universities or engineering schools to achieve better understanding of the recent theories on structural concrete. Having these targets in mind the General Assembly of CEB decided already in 1995 to set-up a Special Activity Group ”Dissemination of Knowledge“ to realise that work. The authors invited to draft the different chapters had been mostly involved already in drafting the Model Code 90. In this way consistent information could be provided, both for the code and the textbook. Each chapter has been thoroughly discussed and commented within the Special Activity Group 2. This textbook was first presented to fib members during the Technical Activity Workshop in October 1999 in Prague, held in connection with the first fib symposium. The authors are looking forward to receiving comments from various corners.
Download or read book Structural Concrete written by M. Nadim Hassoun and published by John Wiley & Sons. This book was released on 2012-05 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing a conceptual understanding of concrete design and analysis, this revised and updated edition builds the student's understanding by presenting design methods in an easy to understand manner supported with the use of numerous examples and problems.
Download or read book Structural Concrete Volume 1 written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2009-01-01 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Concrete Volume 2 written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2010-01-01 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) tofib Model Code 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the Textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated Textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the Textbook.
Download or read book Reinforced Concrete Structures written by Robert Park and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sets out basic theory for the behavior of reinforced concrete structural elements and structures in considerable depth. Emphasizes behavior at the ultimate load, and, in particular, aspects of the seismic design of reinforced concrete structures. Based on American practice, but also examines European practice.
Download or read book Structural Concrete Textbook Volume 5 written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2012-06-01 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) tofib Model Code for Concrete Structures 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the textbook.
Download or read book Concrete Structures written by Mehdi Setareh and published by Springer. This book was released on 2016-08-13 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised, fully updated second edition covers the analysis, design, and construction of reinforced concrete structures from a real-world perspective. It examines different reinforced concrete elements such as slabs, beams, columns, foundations, basement and retaining walls and pre-stressed concrete incorporating the most up-to-date edition of the American Concrete Institute Code (ACI 318-14) requirements for the design of concrete structures. It includes a chapter on metric system in reinforced concrete design and construction. A new chapter on the design of formworks has been added which is of great value to students in the construction engineering programs along with practicing engineers and architects. This second edition also includes a new appendix with color images illustrating various concrete construction practices, and well-designed buildings. The ACI 318-14 constitutes the most extensive reorganization of the code in the past 40 years. References to the various sections of the ACI 318-14 are provided throughout the book to facilitate its use by students and professionals. Aimed at architecture, building construction, and undergraduate engineering students, the scope of concepts in this volume emphasize simplified and practical methods in the analysis and design of reinforced concrete. This is distinct from advanced, graduate engineering texts, where treatment of the subject centers around the theoretical and mathematical aspects of design. As in the first edition, this book adopts a step-by-step approach to solving analysis and design problems in reinforced concrete. Using a highly graphical and interactive approach in its use of detailed images and self-experimentation exercises, “Concrete Structures, Second Edition,” is tailored to the most practical questions and fundamental concepts of design of structures in reinforced concrete. The text stands as an ideal learning resource for civil engineering, building construction, and architecture students as well as a valuable reference for concrete structural design professionals in practice.
Download or read book Finite Element Design of Concrete Structures written by Guenter Axel Rombach and published by Thomas Telford. This book was released on 2004 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Finite Element Design of Concrete Structures: practical problems and their solutions the author addresses this blind belief in computer results by offering a useful critique that important details are overlooked due to the flood of information from the output of computer calculations. Indeed, errors in the numerical model may lead in extreme cases to structural failures as the collapse of the so-called Sleipner platform has demonstrated.
Download or read book fib Model Code for Concrete Structures 2010 written by fib - federation internationale du beton and published by John Wiley & Sons. This book was released on 2013-12-04 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Federation for Structural Concrete (fib) is a pre-normative organization. 'Pre-normative' implies pioneering work in codification. This work has now been realized with the fib Model Code 2010. The objectives of the fib Model Code 2010 are to serve as a basis for future codes for concrete structures, and present new developments with regard to concrete structures, structural materials and new ideas in order to achieve optimum behaviour. The fib Model Code 2010 is now the most comprehensive code on concrete structures, including their complete life cycle: conceptual design, dimensioning, construction, conservation and dismantlement. It is expected to become an important document for both national and international code committees, practitioners and researchers. The fib Model Code 2010 was produced during the last ten years through an exceptional effort by Joost Walraven (Convener; Delft University of Technology, The Netherlands), Agnieszka Bigaj-van Vliet (Technical Secretary; TNO Built Environment and Geosciences, The Netherlands) as well as experts out of 44 countries from five continents.
Download or read book Reinforced Concrete Structures Vol I written by Dr. B.C. Punmia and published by Firewall Media. This book was released on 1992 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Reinforced Concrete written by Jack C. McCormac and published by . This book was released on 2005 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Reinforced Concrete Structures written by Omar Chaallal and published by PUQ. This book was released on 2010-08 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the analysis and design of reinforced concrete structural members in conformity with the 2014 version of the CSA A23.3 Canadian standard. Such members are often encountered in practice, particularly in buildings. This second edition considers all the changes brought into the 2014 CSA A23.3 Canadian standard. In addition, with respect to the first edition, two new chapters related to the design of walls and of prestressed concrete structures are introduced. Using an original approach, the author presents the subject matter as clearly and effectively as possible. Each aspect is carefully illustrated and is the subject of a thorough theoretical development. This is followed by a step-by-step procedure for both design and verification, along with many fully developed numerical applications. This book is intended for practicing engineers as well as for students of that field. Engineers will find a valuable and concise reference which complements the standards and other engineering tools for their daily tasks. Students will use it as a textbook on reinforced concrete structures presented in an original and easy-to-use format.
Download or read book Building Code Requirements for Structural Concrete ACI 318 11 and Commentary written by ACI Committee 318 and published by Ingram. This book was released on 2011 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Behavior and analysis of reinforced concrete structures under alternate actions inducing inelastic response written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1994-05-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reinforced Concrete Design written by Svetlana Brzev and published by . This book was released on 2016-08-22 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt:
