Download or read book Structural Analysis of Composite Wind Turbine Blades written by Dimitris I Chortis and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concerns the development of novel finite elements for the structural analysis of composite beams and blades. The introduction of material damping is also an important aspect of composite structures and it is presented here in terms of their static and dynamic behavior. The book thoroughly presents a new shear beam finite element, which entails new blade section mechanics, capable of predicting structural blade coupling due to composite coupling and/or internal section geometry. Theoretical background is further expanded towards the inclusion of nonlinear structural blade models and damping mechanics for composite structures. The models effectively include geometrically nonlinear terms due to large displacements and rotations, improve the modeling accuracy of very large flexible blades, and enable the modeling of rotational stiffening and buckling, as well as, nonlinear structural coupling. Validation simulations on specimen level study the geometric nonlinearities effect on the modal frequencies and damping values of composite strips of various angle-ply laminations under either tensile or buckling loading. A series of correlation cases between numerical predictions and experimental measurements give credence to the developed nonlinear beam finite element models and underline the essential role of new nonlinear damping and stiffness terms.

Download or read book Structural Analysis of Composite Wind Turbine Blades written by Dimitris I. Chortis and published by . This book was released on 2013-07-31 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Analysis of a Composite Wind Turbine Blade written by Neelabh Gupta and published by LAP Lambert Academic Publishing. This book was released on 2013 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ever wondered, how it feel likes to be sitting on a giant ferris wheel which is 90 m high, 126 m wide and spinning at a speed of 80 m/s: fearsome, thrilling, exciting? Now imagine this happening for 20 long years; what then? The book is written exactly to narrate those feelings, only in a subtle "Engineer's" way. It deals with a composite blade for a wind turbine and its journey of life where impetus is given on its structural strength and robustness in terms of fatigue life.

Download or read book Advances in wind turbine blade design and materials written by D.J. Lekou and published by Elsevier Inc. Chapters. This book was released on 2013-10-31 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chapter discusses the topic of probabilistic analysis of wind turbine blades. First, structural analysis models, the definition of ‘failure’ and the treatment of random variables will be explored, focusing on the challenges involved in a probabilistic design depending on the choices made during each step. Next, the various probabilistic methods (Monte Carlo method, first-order reliability method, Edgeworth expansion method, response surface method) will be described. Issues arising out of the use of composite material structures, in applications such as wind turbine blades, as well as other aspects relating to wind energy applications will be highlighted, and techniques will be discussed through examples.

Download or read book Advances in Wind Turbine Blade Design and Materials written by Povl Brondsted and published by Elsevier. This book was released on 2013-10-31 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind energy is gaining critical ground in the area of renewable energy, with wind energy being predicted to provide up to 8% of the world’s consumption of electricity by 2021. Advances in wind turbine blade design and materials reviews the design and functionality of wind turbine rotor blades as well as the requirements and challenges for composite materials used in both current and future designs of wind turbine blades. Part one outlines the challenges and developments in wind turbine blade design, including aerodynamic and aeroelastic design features, fatigue loads on wind turbine blades, and characteristics of wind turbine blade airfoils. Part two discusses the fatigue behavior of composite wind turbine blades, including the micromechanical modelling and fatigue life prediction of wind turbine blade composite materials, and the effects of resin and reinforcement variations on the fatigue resistance of wind turbine blades. The final part of the book describes advances in wind turbine blade materials, development and testing, including biobased composites, surface protection and coatings, structural performance testing and the design, manufacture and testing of small wind turbine blades. Advances in wind turbine blade design and materials offers a comprehensive review of the recent advances and challenges encountered in wind turbine blade materials and design, and will provide an invaluable reference for researchers and innovators in the field of wind energy production, including materials scientists and engineers, wind turbine blade manufacturers and maintenance technicians, scientists, researchers and academics. Reviews the design and functionality of wind turbine rotor blades Examines the requirements and challenges for composite materials used in both current and future designs of wind turbine blades Provides an invaluable reference for researchers and innovators in the field of wind energy production

Download or read book Advances in composite wind turbine blades A comparative study written by Adam Chehouri and published by diplom.de. This book was released on 2014-03-01 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the wind industry, the current trend is towards building larger and larger turbines. This presents additional structural challenges and requires blade materials that are both lighter and stiffer than the ones presently used. This study is aimed to aid the work of designing new wind turbine blades by providing a comparative study of different composite materials. A coupled Finite-Element-Method (FEM) - Blade Element Momentum (BEM) code was used to simulate the aerodynamic forces subjected on the blade. For this study, the finite element study was conducted on the Static Structural Workbench of ANSYS, as for the geometry of the blade it was imported from a previous study prepared by Cornell University. Confirmation of the performance analysis of the chosen wind turbine blade is presented and discussed including the generated power, tip deflection, thrust and tangential force for a steady flow of 8m/s. A homogenization method was applied to derive the mechanical properties and ultimate strengths of the composites. The Tsai-Hill and Hoffman failure criterions were both conducted to the resulting stresses and shears for each blade composite material structure to determine the presence of static rupture. A progressive fatigue damage model was conducted to simulate the fatigue behavior of laminated composite materials, an algorithm developed by Shokrieh.

Download or read book MARE WINT written by Wiesław Ostachowicz and published by Springer. This book was released on 2016-08-30 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a holistic, interdisciplinary overview of offshore wind energy, and is a must-read for advanced researchers. Topics, from the design and analysis of future turbines, to the decommissioning of wind farms, are covered. The scope of the work ranges from analytical, numerical and experimental advancements in structural and fluid mechanics, to novel developments in risk, safety & reliability engineering for offshore wind.The core objective of the current work is to make offshore wind energy more competitive, by improving the reliability, and operations and maintenance (O&M) strategies of wind turbines. The research was carried out under the auspices of the EU-funded project, MARE-WINT. The project provided a unique opportunity for a group of researchers to work closely together, undergo multidisciplinary doctoral training, and conduct research in the area of offshore wind energy generation. Contributions from expert, external authors are also included, and the complete work seeks to bridge the gap between research and a rapidly-evolving industry.

Download or read book 10th International Conference on FRP Composites in Civil Engineering written by Alper Ilki and published by Springer Nature. This book was released on 2021-11-26 with total page 2516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of FRP composites and structures, as presented by leading international researchers and engineers at the 10th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE), held in Istanbul, Turkey on December 8-10, 2021. It covers a diverse range of topics such as All FRP structures; Bond and interfacial stresses; Concrete-filled FRP tubular members; Concrete structures reinforced or pre-stressed with FRP; Confinement; Design issues/guidelines; Durability and long-term performance; Fire, impact and blast loading; FRP as internal reinforcement; Hybrid structures of FRP and other materials; Materials and products; Seismic retrofit of structures; Strengthening of concrete, steel, masonry and timber structures; and Testing. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.

Download or read book Structure Design for Wind Turbine Blade written by Wang Tongguang and published by . This book was released on 2019-04-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses the design and verification of composite materials and components. The blade is the basic and the most important component of wind turbine. Blade structure reliability is an important feature to ensure the safe operation of blades in a turbine. This book describes all aspects of blade structure design, including basic theories and design methods. It is invaluable for professionals, technical personnel, students and faculties.

Download or read book Finite Element Analysis of Composite Laminates written by O.O. Ochoa and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are increasingly used in aerospace, underwater, and automotive structures. To take advantage of the full potential of composite materials, structural analysts and designers must have accurate mathematical models and design methods at their disposal. The objective of this monograph is to present the laminated plate theories and their finite element models to study the deformation, strength and failure of composite structures. Emphasis is placed on engineering aspects, such as the analytical descriptions, effective analysis tools, modeling of physical features, and evaluation of approaches used to formulate and predict the response of composite structures. The first chapter presents an overview of the text. Chapter 2 is devoted to the introduction of the definitions and terminology used in composite materials and structures. Anisotropic constitutive relations and Iaminate plate theories are also reviewed. Finite element models of laminated composite plates are presented in Chapter 3. Numerical evaluation of element coefficient matrices, post-computation of strains and stresses, and sample examples of laminated plates in bending and vibration are discussed. Chapter 4 introduces damage and failure criteria in composite laminates. Finally, Chapter 5 is dedicated to case studies involving various aspects and types of composite structures. Joints, cutouts, woven composites, environmental effects, postbuckling response and failure of composite laminates are discussed by considering specific examples.

Download or read book Wind Turbines written by Abdel Ghani Aissaoui and published by BoD – Books on Demand. This book was released on 2016-07-27 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable energies constitute excellent solutions to both the increase of energy consumption and environment problems. Among these energies, wind energy is very interesting. Wind energy is the subject of advanced research. In the development of wind turbine, the design of its different structures is very important. It will ensure: the robustness of the system, the energy efficiency, the optimal cost and the high reliability. The use of advanced control technology and new technology products allows bringing the wind energy conversion system in its optimal operating mode. Different strategies of control can be applied on generators, systems relating to blades, etc. in order to extract maximal power from the wind. The goal of this book is to present recent works on design, control and applications in wind energy conversion systems.

Download or read book Advances in Design and Thermal Systems written by Lionel Ganippa and published by Springer Nature. This book was released on 2021-04-21 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the select peer-reviewed proceedings of the International Conference on Emerging Trends in Design, Manufacturing, Materials and Thermal Sciences (ETDMMT 2020). The contents focus on latest research in product design, CAD/CAE/CFD, robotic systems, neural networks, thermal systems, alternative fuels, propulsion systems, environmental issues related to combustion, autonomous vehicles and alternative energy applications. In addition, the book also covers recent advances in automotive engineering and aerospace technologies. Given the range of contents covered, this book can be useful for students, researchers as well as practicing engineers.

Download or read book Hybrid Anisotropic Materials for Wind Power Turbine Blades written by Yosif Golfman and published by CRC Press. This book was released on 2016-04-19 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on rapid technological developments in wind power, governments and energy corporations are aggressively investing in this natural resource. Illustrating some of the crucial new breakthroughs in structural design and application of wind energy generation machinery, Hybrid Anisotropic Materials for Wind Power Turbine Blades explores new automat

Download or read book Acoustic Emission Signal Analysis and Damage Mode Identification of Composite Wind Turbine Blades written by Pengfei Liu and published by Elsevier. This book was released on 2023-05-20 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acoustic Emission Signal Analysis and Damage Mode Identification of Composite Wind Turbine Blades covers both the underlying theory and various techniques for effective structural monitoring of composite wind turbine blades via acoustic emission signal analysis, helping readers solve critical problems such as noise elimination, defect detection, damage mode identification, and more. Author Pengfei Liu introduces techniques for identifying and analyzing progressive failure under tension, delamination, damage localization, adhesive composite joint failure, and other degradation phenomena, outlining methods such as time-difference, wavelet, machine learning, and more including combined methods. The disadvantages and advantages of using each method are covered as are techniques for different blade-lengths and various blade substructures. Piezoelectric sensors are discussed as is experimental analysis of damage source localization. The book also takes great lengths to let readers know when techniques and concepts discussed can be applied to composite materials and structures beyond just wind turbine blades. Features fundamental acoustic emission theories and techniques for monitoring the structural integrity of wind turbine blades Covers sensor arrangements, noise elimination, defect detection, and dominating damage mode identification using acoustic emission techniques Outlines the wavelet method, the time-difference defect detection method, and damage mode identification techniques using machine learning Discusses how the techniques covered can be extended and adapted for use in other composite structures under complex loads and in different environments

Download or read book Fatigue Life Prediction of Composites and Composite Structures written by Anastasios P. Vassilopoulos and published by Woodhead Publishing. This book was released on 2019-10-08 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue Life Prediction of Composites and Composite Structures, Second Edition, is a comprehensive review of fatigue damage and fatigue life modeling and prediction methodologies for composites and their use in practice. In this new edition, existing chapters are fully updated, while new chapters are introduced to cover the most recent developments in the field. The use of composites is growing in structural applications in many industries, including aerospace, marine, wind turbine and civil engineering. However, there are uncertainties about their long-term performance, including performance issues relating to cyclic fatigue loading that hinder the adoption of a commonly accepted credible fatigue design methodology for the life prediction of composite engineering structures. With its distinguished editor and international team of contributors, this book is a standard reference for industry professionals and researchers alike. Examines past, present and future trends associated with the fatigue life prediction of composite materials and structures Assesses novel computational methods for fatigue life modeling and prediction of composite materials under constant amplitude loading Covers a wide range of techniques for predicting fatigue, including their theoretical background and practical applications Addresses new topics and covers contemporary research developments in the field

Download or read book Wind Turbine Blade Design System Aerodynamic and Structural Analysis written by Soumitr Dey and published by . This book was released on 2011 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ever increasing need for energy and the depletion of non-renewable energy resources has led to more advancement in the "Green Energy" field, including wind energy. An improvement in performance of a Wind Turbine will enhance its economic viability, which can be achieved by better aerodynamic designs. In the present study, a design system that has been under development for gas turbine turbomachinery has been modified for designing wind turbine blades. This is a very different approach for wind turbine blade design, but will allow it to benefit from the features inherent in the geometry flexibility and broad design space of the presented system. It starts with key overall design parameters and a low-fidelity model that is used to create the initial geometry parameters. The low-fidelity system includes the axisymmetric solver with loss models, T-Axi (Turbomachinery-AXIsymmetric), MISES blade-to-blade solver and 2D wing analysis code XFLR5. The geometry parameters are used to define sections along the span of the blade and connected to the CAD model of the wind turbine blade through CAPRI (Computational Analysis PRogramming Interface), a CAD neutral API that facilitates the use of parametric geometry definition with CAD. Either the sections or the CAD geometry is then available for CFD and Finite Element Analysis. The GE 1.5sle MW wind turbine and NERL NASA Phase VI wind turbine have been used as test cases. Details of the design system application are described, and the resulting wind turbine geometry and conditions are compared to the published results of the GE and NREL wind turbines. A 2D wing analysis code XFLR5, is used for to compare results from 2D analysis to blade-to-blade analysis and the 3D CFD analysis. This kind of comparison concludes that, from hub to 25% of the span blade to blade effects or the cascade effect has to be considered, from 25% to 75%, the blade acts as a 2d wing and from 75% to the tip 3D and tip effects have to be taken into account for design considerations. In addition, the benefits of this approach for wind turbine design and future efforts are discussed.

Download or read book Advanced Composites in Aerospace Engineering Applications written by Norkhairunnisa Mazlan and published by Springer Nature. This book was released on 2022-02-21 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an authoritative account of the potential of advanced composites such as composites, biocomposites, composites geopolymer, hybrid composites and hybrid biocomposites in aerospace application. It documents how in recent years, composite materials have grown in strength, stature, and significance to become a key material of enhanced scientific interest and resultant research into understanding their behavior for selection and safe use in a wide spectrum of technology-related applications. This collection highlights how their unique combination of superior properties such as low density, high strength, high elastic modulus, high hardness, high temperature capability, and excellent chemical and environmental stability are optimized in technologies within these field.