Download or read book Design and Manufacture of Structural Composites written by Lee Harper and published by Woodhead Publishing. This book was released on 2022-11-30 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Manufacture of Structural Composites provides an overview of the main manufacturing challenges encountered when processing fibre-reinforced composite materials. Composites are unique in that the material is created at the same time as the structure, forming a very close link between the constituents, the manufacturing process and the resulting mechanical performance. This book takes an in-depth look at material choices and the intermediate steps required to convert different fibre and matrix combinations into finished products. It provides an insight into recent developments for each of the manufacturing processes covered, addressing design, cost, rate and mechanical performance. Topics covered include an introduction to composite materials, material preforming and conversion, moulding, digital design and sustainability, which addresses waste reduction, disassembly and fibre recovery. This book has been developed primarily as a teaching resource with contributions from leading experts in the field. The content has evolved from courses given by the authors to mechanical engineering and materials science students, at both undergraduate and postgraduate levels. It also draws upon experience gained during research projects and from leading industry experts. It therefore provides non-specialists with a valuable introduction to composite manufacturing techniques, helping to determine the most suitable manufacturing routes and to understand the challenges associated with the production of high-performance composite components. - Provides an overview of the most common manufacturing routes for fibre reinforced composites, including the influence of the manufacturing route on mechanical properties, production volume and component cost - Discusses recent advances in composite manufacturing, including the use of automation, process simulation, digital factories, and solutions to improve sustainability - Looks at where the composites sector is heading and discusses some of the challenges faced by end-users looking to scale up production and increase the uptake of fibre-reinforced composites for structural applications

Download or read book Advanced Hybrid Composite Materials and their Applications written by Ibrahim M. Alarifi and published by Elsevier. This book was released on 2023-07-03 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Hybrid Composite Materials and Their Applications provides a basic understanding of the engineering of hybrid composite materials. The main topics covered include the fundamental principles of hybrid composite materials, their properties, chemistry, fabrication, and applications. New and modern ways of synthetic engineering are also discussed in detail. The book brings together two very important classes of engineering materials and explains their properties in an easy-to-understand manner. It also covers the latest research outcomes and new technologies from synthetic processes right though to recent applications in different industrial sectors. This book will benefit those with no previous background knowledge as well as the expert working in this field. It will serve as a single comprehensive information resource on various types of engineering materials. - Covers fundamental principles, properties, fabrication and applications - Provides detailed information on various types of composite materials in a single resource - Covers the latest information and recent research outcomes

Download or read book Proceedings from Structural Plastics Conference and New Product Design Competition written by and published by . This book was released on 1990 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lignin Chemistry and Applications written by Jin Huang and published by Elsevier. This book was released on 2019-01-30 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lignin Chemistry and Application systematically discusses the structure, physical and chemical modification of lignin, along with its application in the field of chemicals and materials. It presents the history of lignin chemistry and lignin-modified materials, describes recent progresses, applications and studies, and prospects the development direction of high value applications of lignin in the field of material science. In addition to covering the basic theories and technologies relating to the research and application of lignin in polymer chemistry and materials science, the book also summarizes the latest applications in rubber, engineering plastics, adhesives, films and hydrogels. - Systematically discusses the structure, physical and chemical modification of lignin and its application in materials - Presents the latest research results in the field of lignin - Indicates the development direction of high value applications of lignin in a range of fields, including petrochemicals, household applications, medicine, agriculture, and more

Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fatigue Life Prediction of Composites and Composite Structures written by Anastasios P. Vassilopoulos and published by Woodhead Publishing. This book was released on 2019-10-08 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue Life Prediction of Composites and Composite Structures, Second Edition, is a comprehensive review of fatigue damage and fatigue life modeling and prediction methodologies for composites and their use in practice. In this new edition, existing chapters are fully updated, while new chapters are introduced to cover the most recent developments in the field. The use of composites is growing in structural applications in many industries, including aerospace, marine, wind turbine and civil engineering. However, there are uncertainties about their long-term performance, including performance issues relating to cyclic fatigue loading that hinder the adoption of a commonly accepted credible fatigue design methodology for the life prediction of composite engineering structures. With its distinguished editor and international team of contributors, this book is a standard reference for industry professionals and researchers alike. - Examines past, present and future trends associated with the fatigue life prediction of composite materials and structures - Assesses novel computational methods for fatigue life modeling and prediction of composite materials under constant amplitude loading - Covers a wide range of techniques for predicting fatigue, including their theoretical background and practical applications - Addresses new topics and covers contemporary research developments in the field

Download or read book Process Structure Properties in Polymer Additive Manufacturing written by Swee Leong Sing and published by MDPI. This book was released on 2021-09-01 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) methods have grown and evolved rapidly in recent years. AM for polymers is an exciting field and has great potential in transformative and translational research in many fields, such as biomedical, aerospace, and even electronics. Current methods for polymer AM include material extrusion, material jetting, vat polymerisation, and powder bed fusion. With the promise of more applications, detailed understanding of AM—from the processability of the feedstock to the relationship between the process–structure–properties of AM parts—has become more critical. More research work is needed in material development to widen the choice of materials for polymer additive manufacturing. Modelling and simulations of the process will allow the prediction of microstructures and mechanical properties of the fabricated parts while complementing the understanding of the physical phenomena that occurs during the AM processes. In this book, state-of-the-art reviews and current research are collated, which focus on the process–structure–properties relationships in polymer additive manufacturing.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Elastomeric Nanocellulose Composites written by Sabu Thomas and published by Elsevier. This book was released on 2024-01-16 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elastomeric Nanocellulose Composites provides an in-depth study of recent developments in this fast-evolving research field. This book covers diverse aspects of materials engineering, surface treatments, and fabrication of green nanocomposites. It consolidates recent studies and qualitative findings on the incorporation of a myriad of nanocellulose variants into various types of elastomer matrices with the main goal of enhancing its mechanical integrity and potentially phasing out conventional elastomer fillers. The current market is likewise discussed in detail. This book will provide an in-depth study of current developments of nanocellulose incorporated elastomer composites and their applications.The book will be an essential reference resource for material scientists, academic and industrial researchers, and technologists covering all aspects in the field. Carbon black and silica are currently used as fillers in elastomer-based composites, but the use of these reinforcing agents is not sustainable or eco-friendly. Therefore there is a need to look for more sustainable filler materials for elastomers. - Assists readers in solving fundamental and application-related problems in the development of nanocellulose filled elastomers - Discusses characterization techniques used for analyzing elastomer nanocomposites - Provides various attributes of nanocellulose, its composites with different types of elastomeric materials (both natural and synthetic) and its potential for advanced applications - Includes comprehensive, well structured content to maintain consistency and flow to help readers easily navigate chapters

Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2710 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Eco Friendly Adhesives for Wood and Natural Fiber Composites written by Mohammad Jawaid and published by Springer Nature. This book was released on 2021-01-21 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of eco-friendly resins and their composite materials covering their synthesis, sources, structures and properties for different industrial applications to support the ongoing research and development in eco-friendly and renewable commercial products. It provides comparative discussions on the properties of eco-friendly resins with other polymer composites. It is a useful reference on bio-based eco-friendly polymer resins, wood-based composites, natural fibers and biomass materials for the polymer scientists, engineers and material scientists.

Download or read book Polymer Matrix Composites Guidelines for Characterization of Structural Materials written by Composite Materials Handbook – 17 (CMH-17) and published by SAE International. This book was released on 2022-09-06 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first volume of this six-volume compendium contains guidelines for determining the properties of polymer matrix composite material systems and their constituents, as well as the properties of generic structural elements, including test planning, test matrices, sampling, conditioning, test procedure selection, data reporting, data reduction, statistical analysis, and other related topics. Special attention is given to the statistical treatment and analysis of data. Volume 1 contains guidelines for general development of material characterization data as well as specific requirements for publication of material data in CMH-17. The primary purpose of this volume of the handbook is to document industry best-practices for engineering methodologies related to testing, data reduction, and reporting of property data for current and emerging composite materials. It is used by engineers worldwide in designing and fabricating products made from composite materials. The Composite Materials Handbook, referred to by industry groups as CMH-17, is a six-volume engineering reference tool that contains thousands of records of the latest test data for polymer matrix, metal matrix, ceramic matrix, and structural sandwich composites. CMH-17 provides information and guidance necessary to design, analyze, fabricate, certify and support end items using composite materials. It includes properties of composite materials that meet specific data requirements as well as guidelines for design, analysis, material selection, manufacturing, quality control, and repair.

Download or read book Monthly Catalogue United States Public Documents written by and published by . This book was released on 1995 with total page 1484 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Fibrous Composite Materials for Ballistic Protection written by Xiaogang Chen and published by Woodhead Publishing. This book was released on 2016-01-21 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Fibrous Composite Materials for Ballistic Protection provides the latest information on ballistic protection, a topic that remains an important issue in modern times due to ever increasing threats coming from regional conflicts, terrorism, and anti-social behavior. The basic requirements for ballistic protection equipment are first and foremost, the prevention of a projectile from perforating, the reduction of blunt trauma to the human body caused by ballistic impact, the necessity that they are thermal and provide moisture comfort, and that they are lightweight and flexible to guarantee wearer's mobility. The main aim of this book is to present some of the most recent developments in the design and engineering of woven fabrics and their use as layering materials to form composite structures for ballistic personal protection. Chapter topics include High Performance Ballistic Fibres, Ultra-High Molecular Weight Polyethylene (UHMWPE), Ballistic Damage of Hybrid Composite Materials, Analysis of Ballistic Fabrics and Layered Composite Materials, and Multi-Scale Modeling of Polymeric Composite Materials for Ballistic Protection. - Contributions from leading experts in the field - Cutting edge developments on the engineering of ballistic materials - Comprehensive analysis of the development and uses of advanced fibrous composite materials

Download or read book Technology Assessment of Automotive Applications of Metal plastic Laminates written by Robert Kaiser and published by . This book was released on 1980 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Topics in Modal Analysis Testing Volume 8 written by Michael L. Mains and published by Springer. This book was released on 2019-05-14 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics in Modal Analysis & Testing, Volume 8: Proceedings of the 37th IMAC, A Conference and Exposition on Structural Dynamics, 2019, the eighth volume of eight from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Modal Analysis, including papers on: Analytical Methods Modal Applications Basics of Modal Analysis Experimental Techniques Multi Degree of Freedom Testing Boundary Conditions in Environmental Testing Operational Modal Analysis Modal Parameter Identification Novel Techniques

Download or read book Publications written by United States. National Bureau of Standards and published by . This book was released on 1980 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: