Download or read book Structural Alloys for Nuclear Energy Applications written by Robert Odette and published by Newnes. This book was released on 2019-08-15 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-performance alloys that can withstand operation in hazardous nuclear environments are critical to presentday in-service reactor support and maintenance and are foundational for reactor concepts of the future. With commercial nuclear energy vendors and operators facing the retirement of staff during the coming decades, much of the scholarly knowledge of nuclear materials pursuant to appropriate, impactful, and safe usage is at risk. Led by the multi-award winning editorial team of G. Robert Odette (UCSB) and Steven J. Zinkle (UTK/ORNL) and with contributions from leaders of each alloy discipline, Structural Alloys for Nuclear Energy Applications aids the next generation of researchers and industry staff developing and maintaining steels, nickel-base alloys, zirconium alloys, and other structural alloys in nuclear energy applications. This authoritative reference is a critical acquisition for institutions and individuals seeking state-of-the-art knowledge aided by the editors' unique personal insight from decades of frontline research, engineering and management. - Focuses on in-service irradiation, thermal, mechanical, and chemical performance capabilities. - Covers the use of steels and other structural alloys in current fission technology, leading edge Generation-IV fission reactors, and future fusion power reactors. - Provides a critical and comprehensive review of the state-of-the-art experimental knowledge base of reactor materials, for applications ranging from engineering safety and lifetime assessments to supporting the development of advanced computational models.
Download or read book Structural Alloys for Power Plants written by A. Shirzadi and published by Elsevier. This book was released on 2014-07-30 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current fleets of conventional and nuclear power plants face increasing hostile environmental conditions due to increasingly high temperature operation for improved capacity and efficiency, and the need for long term service. Additional challenges are presented by the requirement to cycle plants to meet peak-load operation. This book presents a comprehensive review of structural materials in conventional and nuclear energy applications. Opening chapters address operational challenges and structural alloy requirements in different types of power plants. The following sections review power plant structural alloys and methods to mitigate critical materials degradation in power plants.
Download or read book Fatigue Data Book written by ASM International and published by ASM International. This book was released on 1994-12-31 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electronic Structure of Disordered Alloys Surfaces and Interfaces written by Ilja Turek and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: At present, there is an increasing interest in the prediction of properties of classical and new materials such as substitutional alloys, their surfaces, and metallic or semiconductor multilayers. A detailed understanding based on a thus of the utmost importance for fu microscopic, parameter-free approach is ture developments in solid state physics and materials science. The interrela tion between electronic and structural properties at surfaces plays a key role for a microscopic understanding of phenomena as diverse as catalysis, corrosion, chemisorption and crystal growth. Remarkable progress has been made in the past 10-15 years in the understand ing of behavior of ideal crystals and their surfaces by relating their properties to the underlying electronic structure as determined from the first principles. Similar studies of complex systems like imperfect surfaces, interfaces, and mul tilayered structures seem to be accessible by now. Conventional band-structure methods, however, are of limited use because they require an excessive number of atoms per elementary cell, and are not able to account fully for e.g. substitu tional disorder and the true semiinfinite geometry of surfaces. Such problems can be solved more appropriately by Green function techniques and multiple scattering formalism.
Download or read book Shape Memory Alloy Engineering written by Antonio Concilio and published by Elsevier. This book was released on 2014-09-25 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape Memory Alloy Engineering introduces materials, mechanical, and aerospace engineers to shape memory alloys (SMAs), providing a unique perspective that combines fundamental theory with new approaches to design and modeling of actual SMAs as compact and inexpensive actuators for use in aerospace and other applications. With this book readers will gain an understanding of the intrinsic properties of SMAs and their characteristic state diagrams, allowing them to design innovative compact actuation systems for applications from aerospace and aeronautics to ships, cars, and trucks. The book realistically discusses both the potential of these fascinating materials as well as their limitations in everyday life, and how to overcome some of those limitations in order to achieve proper design of useful SMA mechanisms. Discusses material characterization processes and results for a number of newer SMAs Incorporates numerical (FE) simulation and integration procedures into commercial codes (Msc/Nastran, Abaqus, and others) Provides detailed examples on design procedures and optimization of SMA-based actuation systems for real cases, from specs to verification lab tests on physical demonstrators One of the few SMA books to include design and set-up of demonstrator characterization tests and correlation with numerical models
Download or read book Properties of Reactor Structural Alloys After Neutron Or Particle Irradiation written by C. J. Baroch and published by ASTM International. This book was released on 1975 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Irradiation Effects on Structural Alloys for Nuclear Reactor Applications written by A. L. Bement and published by ASTM International. This book was released on 1971 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue and Fracture of Traditional and Advanced Structural Alloys written by Filippo Berto and published by MDPI. This book was released on 2021-04-01 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fatigue behavior of traditional and advanced materials is a very relevant topic in different strategic applications impacting and affecting our daily lives. The present Special Issue invites papers to update readers on the state of the art on this important topic. Both review and original manuscripts are welcome. Special attention will be dedicated to innovative materials and innovative manufacturing processes or post-treatments able to improve the fatigue life and reliability of a structural component. Scale effect will be also fully treated focusing on different applications and multiscale approaches aimed at understanding structural integrity under cyclic loadings. This state of the art perspective will help engineers, designers and people from the academy gain an updated view on this very challenging topic which is nowadays very important due to the advances in manufacturing technologies that allow complex new materials to be fabricated.
Download or read book Structure and Properties of High Entropy Alloys written by V. E. Gromov and published by Springer Nature. This book was released on 2021-07-10 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of high entropy alloys, explaining all the basics of this new class of materials that emerged at the beginning of the 21st: It begins with the basics of the manufacturing methods of high entropy alloys and discusses the mechanical properties and deformation mechanisms of high entropy alloys. Then the book addresses the stability of these alloys and explores the prospects of high entropy alloys for applications.This book is intended as an introduction for physicists and materials scientists who need to become familiar with high entropy alloys.
Download or read book Metallurgy and Design of Alloys with Hierarchical Microstructures written by Krishnan K. Sankaran and published by Elsevier. This book was released on 2017-06-14 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgy and Design of Alloys with Hierarchical Microstructures covers the fundamentals of processing-microstructure-property relationships and how multiple properties are balanced and optimized in materials with hierarchical microstructures widely used in critical applications. The discussion is based principally on metallic materials used in aircraft structures; however, because they have sufficiently diverse microstructures, the underlying principles can easily be extended to other materials systems. With the increasing microstructural complexity of structural materials, it is important for students, academic researchers and practicing engineers to possess the knowledge of how materials are optimized and how they will behave in service. The book integrates aspects of computational materials science, physical metallurgy, alloy design, process design, and structure-properties relationships, in a manner not done before. It fills a knowledge gap in the interrelationships of multiple microstructural and deformation mechanisms by applying the concepts and tools of designing microstructures for achieving combinations of engineering properties—such as strength, corrosion resistance, durability and damage tolerance in multi-component materials—used for critical structural applications. - Discusses the science behind the properties and performance of advanced metallic materials - Provides for the efficient design of materials and processes to satisfy targeted performance in materials and structures - Enables the selection and development of new alloys for specific applications based upon evaluation of their microstructure as illustrated in this work
Download or read book Aerospace Alloys written by Stefano Gialanella and published by Springer Nature. This book was released on 2019-10-30 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an up-to-date overview on the main classes of metallic materials currently used in aeronautical structures and propulsion engines and discusses other materials of potential interest for structural aerospace applications. The coverage encompasses light alloys such as aluminum-, magnesium-, and titanium-based alloys, including titanium aluminides; steels; superalloys; oxide dispersion strengthened alloys; refractory alloys; and related systems such as laminate composites. In each chapter, materials properties and relevant technological aspects, including processing, are presented. Individual chapters focus on coatings for gas turbine engines and hot corrosion of alloys and coatings. Readers will also find consideration of applications in aerospace-related fields. The book takes full account of the impact of energy saving and environmental issues on materials development, reflecting the major shifts that have occurred in the motivations guiding research efforts into the development of new materials systems. Aerospace Alloys will be a valuable reference for graduate students on materials science and engineering courses and will also provide useful information for engineers working in the aerospace, metallurgical, and energy production industries.
Download or read book Structural Alloys written by Mihail Ionescu and published by Trans Tech Publications Ltd. This book was released on 2023-12-05 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer-reviewed papers only
Download or read book Fundamental Aspects of Structural Alloy Design written by Robert Jaffee and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 665 pages. Available in PDF, EPUB and Kindle. Book excerpt: FUNDAMENTAL ASPECTS OF STRUCTURAL ALLOY DESIGN is the proceedings of the tenth Battelle Colloquium in the Materials Sciences, held in Seattle, Washington, and Harrison Hot Springs, B.C., September 15-19, 1975. The theme of the conference was the emerging science of alloy design. Although the relationships of properties of alloys to their composition and structure have long been a dominant theme in physical metallurgy, it is only recently that metallurgists have turned their attention from the analytical, post hoc study of the structure-property relationship to the synthesis approach of alloy design. As usual in the Battelle colloquia, the first day started with a group of introductory lectures presented by leaders in the field, each emphasizing his personal approach to the problem. This provided a historical perspective for the colloquium. These papers, together with the banquet address of Professor J. R. Low, Jr., who was honored at the colloquium, comprise the introductory section of these proceedings. Alloy design is generally specific to a given application. Thus, the needs in alloy design in a number of important applications, gas turbines, electrical-power-generation equipment, airframes, pressure vessels, and nuclear applications were presented in a group of papers. An agenda discus sion on "Needs in Alloy Design" followed. These papers give the external constraints on alloy design applications, and criteria for mechanical, physical, and chemical properties for which the alloys must be designed.
Download or read book Rapidly Solidified Alloys written by Liebermann and published by CRC Press. This book was released on 1993-05-20 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume details the principles underlying rapid solidification processing, material structure and properties, and their applications. This practical resource presents a manifold approach to both amorphous and crystalline rapidly solidified metallic alloys.;Written by over 30 internationally acclaimed specialists in their respective fields, Rapidly Solidified Alloys: surveys nucleation and growth studies in undercooled melts; examines various processes for the production of rapidly solidified alloys; discusses the compaction of amorphous alloys; describes surface remelting treatments for the rapid solidification of surface layers and the resultant improved workpiece properties; covers the closely related topics of structural relaxation, atomic transport and other thermally induced processes; demonstrates microstructure-property relationships in rapidly quenched crystalline alloy systems and their beneficial effects in applications; and elucidates the basic, engineeering, and applications-oriented magnetic properties of amorphous alloys.;Furnishing more than 2300 literature citations for further study of specific subjects, Rapidly Solidified Alloys is intended for materials, mechanical, product, and civil engineers; metallurgists; magneticians; physicists; physical chemists; and graduate students in these disciplines.
Download or read book High Entropy Alloys written by T.S. Srivatsan and published by CRC Press. This book was released on 2020-07-21 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a cohesive overview of innovations, advances in processing and characterization, and applications for high entropy alloys (HEAs) in performance-critical and non-performance-critical sectors. It covers manufacturing and processing, advanced characterization and analysis techniques, and evaluation of mechanical and physical properties. With chapters authored by a team of internationally renowned experts, the volume includes discussions on high entropy thermoelectric materials, corrosion and thermal behavior of HEAs, improving fracture resistance, fatigue properties and high tensile strength of HEAs, HEA films, and more. This work will be of interest to academics, scientists, engineers, technologists, and entrepreneurs working in the field of materials and metals development for advanced applications. Features Addresses a broad spectrum of HEAs and related aspects, including manufacturing, processing, characterization, and properties Emphasizes the application of HEAs Aimed at researchers, engineers, and scientists working to develop materials for advanced applications T.S. Srivatsan, PhD, Professor of Materials Science and Engineering in the Department of Mechanical Engineering at the University of Akron (Ohio, USA), earned his MS in Aerospace Engineering in 1981 and his PhD in Mechanical Engineering in 1984 from the Georgia Institute of Technology (USA). He has authored or edited 65 books, delivered over 200 technical presentations, and authored or co-authored more than 700 archival publications in journals, book chapters, book reviews, proceedings of conferences, and technical reports. His RG score is 45 with a h-index of 53 and Google Scholar citations of 9000, ranking him to be among the top 2% of researchers in the world. He is a Fellow of (i) the American Society for Materials International, (ii) the American Society of Mechanical Engineers, and (iii) the American Association for Advancement of Science. Manoj Gupta, PhD, is Associate Professor of Materials at NUS, Singapore. He is a former Head of Materials Division of the Mechanical Engineering Department and Director Designate of Materials Science and Engineering Initiative at NUS, Singapore. In August 2017, he was highlighted among the Top 1% Scientists of the World by the Universal Scientific Education and Research Network and in the Top 2.5% among scientists as per ResearchGate. In 2018, he was announced as World Academy Championship Winner in the area of Biomedical Sciences by the International Agency for Standards and Ratings. A multiple award winner, he actively collaborates/visits as an invited researcher and visiting and chair professor in Japan, France, Saudi Arabia, Qatar, China, the United States, and India.
Download or read book Aluminium Structural Design written by Frederico M. Mazzolani and published by Springer. This book was released on 2014-05-04 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of the book is the design of aluminium alloys structures. The subject is treated from different points of view, like technology, theory, codification and applications. Aluminium alloys are successfully employed in the transportation industry; A parallel trend has been observed in the last decades in civil engineering structures, where aluminium alloys compete with steel (long-span roofing, bridges, hydraulic structures, offshore superstructures). This volume collects the lectures of out-standing international experts, who are all involved in the codification activity of Eurocode 9 on Aluminium Structural Design. It illustrates, with particular reference to the fields of transportation and civil engineering, the basic design principles from the material properties and the technological aspects of their application, to the evaluation of the resistance of the structural elements (member and plates) under static, dynamic and fatigue loading conditions.
Download or read book Magnesium Alloys Containing Rare Earth Metals written by L.L. Rokhlin and published by CRC Press. This book was released on 2003-02-20 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium-based alloys containing rare-earth metals are important structural materials, as they combine low density with high-strength properties. This makes them particularly attractive for industry, especially in cases where the low weight of constructions is critical, as in aircraft and space apparatus construction. One of the remarkable feature
