Download or read book Stress and Damage in Polymer Matrix Composite Materials Due to Material Degradation at High Temperatures written by Hugh L. McManus and published by . This book was released on 1996 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stress and Damage in Polymer Matrix Composite Materials Due to Material Degradation at High Temperatures written by National Aeronautics and Space Adm Nasa and published by . This book was released on 2018-10-18 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes analytical methods for calculating stresses and damage caused by degradation of the matrix constituent in polymer matrix composite materials. Laminate geometry, material properties, and matrix degradation states are specified as functions of position and time. Matrix shrinkage and property changes are modeled as functions of the degradation states. The model is incorporated into an existing composite mechanics computer code. Stresses, strains, and deformations at the laminate, ply, and micro levels are calculated, and from these calculations it is determined if there is failure of any kind. The rationale for the model (based on published experimental work) is presented, its integration into the laminate analysis code is outlined, and example results are given, with comparisons to existing material and structural data. The mechanisms behind the changes in properties and in surface cracking during long-term aging of polyimide matrix composites are clarified. High-temperature-material test methods are also evaluated. McManus, Hugh L. and Chamis, Christos C. Glenn Research Center RTOP 505-62-10...
Download or read book High Temperature and Environmental Effects on Polymeric Composites written by Thomas S. Gates and published by ASTM International. This book was released on 1997 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Progress in Durability Analysis of Composite Systems written by K.L. Reifsnider and published by CRC Press. This book was released on 1998-01-01 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite material systems are the basis for much of the natural world around us and are rapidly becoming the basis for many modern engineering components. A controlling feature for the general use of such systems is their damage tolerance, durability and reliability. The present book is a comprehensive cross section of the state of the art in the field of the durability of polymer-based, composite, and adhesive systems. As such, it is of special value to researchers concerned with the frontier of the field, to students concerned with the substance of the subject, and to the applied community concerned with the finding methodologies that make it possible to design safe and durable engineering components using material systems.
Download or read book Fire Properties of Polymer Composite Materials written by A. P. Mouritz and published by Springer Science & Business Media. This book was released on 2007-01-30 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first to deal with the important topic of the fire behaviour of fibre reinforced polymer composite materials. The book covers all of the key issues on the behaviour of composites in a fire. Also covered are fire protection materials for composites, fire properties of nanocomposites, fire safety regulations and standards, fire test methods, and health hazards from burning composites.
Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
Download or read book Time Dependent and Nonlinear Effects in Polymers and Composites written by Richard Allan Schapery and published by ASTM International. This book was released on 2000 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Improved reliability in commercial and military applications requires improved understanding of and predictive models for the time- dependent and nonlinear mechanical behavior of polymeric composites. The May 1998 American Society for Testing and Materials symposium sought to fuse the efforts in this direction of specialists in polymers and composites; these 18 papers are therefore grouped under the subheadings of polymers and composites. Primary polymer topics are chemical and physical aging, nonlinear viscoelasticity, and viscoplasticity. Composites' issues include: the effect of physical aging on time-dependent behavior, multiaxial nonlinear effects, compressive behavior, nonlinear viscoelasticity and viscoplasticity, failure mechanisms, hygrothermal effects, durability, and accelerated strength testing. Schapery is affiliated with the U. of Texas at Austin, and Sun is at Purdue U. Annotation copyrighted by Book News, Inc., Portland, OR.
Download or read book Environmental Degradation of Industrial Composites written by Celine A Mahieux and published by Elsevier. This book was released on 2005-12-14 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thanks to their low density and tailored properties, polymer matrix composites are attractive candidates for a large number of industrial applications ranging from aerospace to transportation and energy. However, the behaviour of polymer-based materials is strongly affected by a number of environmental factors. Environmental Degradation in Industrial Composites provides vital information on the effects of environmental factors such as temperature, liquid and gas exposure, electrical fields and radiations, and how micro- and micromechanical calculations during design and manufacture must take these effects into account. The book concludes with reviews on standard and specific testing methods for the various environmental factors and their combinations, helping mechanical/materials engineers and specifiers to predict possible changes due to environmental conditions. Each chapter is supplemented by industrial case studies to help in the understanding of degradation of composites in real life situations.This book will help you to...* Understand how environmental factors lead to degradation effects in polymer matrix composite structures* Build these factors into calculations when predicting the part performance and lifetime of structures* Compare real-life situations from case studies with your predicted results* Predict probable composite behaviour with greater accuracyThis book will help you to...* Understand how environmental factors lead to degradation effects in polymer matrix composite structures* Build these factors into calculations when predicting the part performance and lifetime of structures* Compare real-life situations from case studies with your predicted results* Predict probable composite behaviour with greater accuracy
Download or read book Nontraditional Methods of Sensing Stress Strain and Damage in Materials and Structures written by David A. Stubbs and published by ASTM International. This book was released on 1997 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: These facsimiles of 16 contributions from the symposium held in May 1996 in Orlando provide information on the behavior of materials and structures. The authors describe novel ways to measure point to point deformation (or strain, when normalized), procedures for measuring crack length and the stres
Download or read book Image Correlation for Shape Motion and Deformation Measurements written by Michael A. Sutton and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Image Correlation for Shape, Motion and Deformation Measurements provides a comprehensive overview of data extraction through image analysis. Readers will find and in-depth look into various single- and multi-camera models (2D-DIC and 3D-DIC), two- and three-dimensional computer vision, and volumetric digital image correlation (VDIC). Fundamentals of accurate image matching are described, along with presentations of both new methods for quantitative error estimates in correlation-based motion measurements, and the effect of out-of-plane motion on 2D measurements. Thorough appendices offer descriptions of continuum mechanics formulations, methods for local surface strain estimation and non-linear optimization, as well as terminology in statistics and probability. With equal treatment of computer vision fundamentals and techniques for practical applications, this volume is both a reference for academic and industry-based researchers and engineers, as well as a valuable companion text for appropriate vision-based educational offerings.
Download or read book Defects and Damage in Composite Materials and Structures written by Rikard Benton Heslehurst and published by CRC Press. This book was released on 2014-04-21 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advantages of composite materials include a high specific strength and stiffness, formability, and a comparative resistance to fatigue cracking and corrosion. However, not forsaking these advantages, composite materials are prone to a wide range of defects and damage that can significantly reduce the residual strength and stiffness of a structure or result in unfavorable load paths. Emphasizing defect identification and restitution, Defects and Damage in Composite Materials and Structures explains how defects and damage in composite materials and structures impact composite component performance. Providing ready access to an extensive, descriptive list of defects and damage types, this must-have reference: Examines defect criticality in composite structures Recommends repair actions to restore structural integrity Discusses failure modes and mechanisms of composites due to defects Reviews NDI processes for finding and identifying defects in composite materials Relating defect detection methods to defect type, the author merges his experience in the field of in-service activities for composite airframe maintenance and repair with indispensable reports and articles on defects and damage in advanced composite materials from the last 50 years.
Download or read book Fiber Reinforced Polymer FRP Composites for Infrastructure Applications written by Ravi Jain and published by Springer Science & Business Media. This book was released on 2012-01-02 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines current issues of fiber reinforced polymer (FRP) composites in civil infrastructure. The contents of this book are divided into two parts. The first part engages topics related to durability and service life of FRP composites and how they contribute to sustainability. The second part highlights implementation and applications of the FRP composites with an emphasis on bridge structures. An introductory chapter provides an overview of FRP composites and its role in a sustainable built environment highlighting the issues of durability and service life followed by a current review of sustainability in infrastructure design.
Download or read book Adaptive Structures Eighth Japan US Conference Proceedings written by Golam M. Newaz and published by CRC Press. This book was released on 2019-11-28 with total page 1068 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1998. A collection of papers presented at the Proceedings of the Eighth Japan-U.S. Conference On Composite Materials, SEPTEMBER 24 to 25 , 1998. The conference is organized by Wayne State University and American Society for Composites in cooperation with U.S. Organizing Committee and the Japanese Organizing Committee. Since the Seventh Meeting in Kyoto in 1995, this meeting brings together accomplished composite researchers between the two countries to share latest developments and advances in the field. The scope of the current conference ranges over all aspects of composite materials with some emphasis on infrastructure applications of composites. Key areas in composites are covered by 110 papers with 35 presentations from Japan.
Download or read book Proceedings of the 11th International Conference on Composite Materials written by Murray L. Scott and published by Woodhead Publishing. This book was released on 1997 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Degradation of Continuous Fiber Ceramic Matrix Composites Under Constant Load Conditions written by and published by . This book was released on 2000 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ten different ceramic matrix composite (CMC) materials were subjected to a constant load and temperature in an air environment. Tests conducted under these conditions are often referred to as stressed oxidation or creep rupture tests. The stressed oxidation tests were conducted at a temperature of 1454 deg C at stresses of 69 MPa, 172 MPa and 50% of each material's ultimate tensile strength. The ten materials included such CMCs as C/SiC, SiC/C, SiC/SiC, SiC/SiNC and C/C. The time to failure results of the stressed oxidation tests will be presented. Much of the discussion regarding material degradation under stressed oxidation conditions will focus on C/SiC composites. Thermogravimetric analysis of the oxidation of fully exposed carbon fiber (T300) and of C/SiC coupons will be presented as well as a model that predicts the oxidation patterns and kinetics of carbon fiber tows oxidizing in a nonreactive matrix.
Download or read book Creep and Fatigue in Polymer Matrix Composites written by Rui Miranda Guedes and published by Woodhead Publishing. This book was released on 2019-03-14 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep and Fatigue in Polymer Matrix Composites, Second Edition, updates the latest research in modeling and predicting creep and fatigue in polymer matrix composites. The first part of the book reviews the modeling of viscoelastic and viscoplastic behavior as a way of predicting performance and service life. Final sections discuss techniques for modeling creep rupture and failure and how to test and predict long-term creep and fatigue in polymer matrix composites. - Reviews the latest research in modeling and predicting creep and fatigue in polymer matrix composites - Puts a specific focus on viscoelastic and viscoplastic modeling - Features the time-temperature-age superposition principle for predicting long-term response - Examines the creep rupture and damage interaction, with a particular focus on time-dependent failure criteria for the lifetime prediction of polymer matrix composite structures that are illustrated using experimental cases
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 1556 pages. Available in PDF, EPUB and Kindle. Book excerpt:
