Download or read book Stress Analysis of Structural Bonded Joints written by D. M. Gleich and published by IOS Press. This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dissertation is part of a series on the application of advanced sandwich structures. Subjects that will be dealt with are e.g. the design of sandwich structures and stress analysis methods for designing adhesively bonded joints in metals and composite structures.
Download or read book Modeling of Adhesively Bonded Joints written by Lucas F. M. da Silva and published by Springer Science & Business Media. This book was released on 2008-10-14 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: A lot of recent developments have been made about adhesively bonded joints modeling using various methods of analysis. The increasing application of adhesives in industry is partly due to the increased sophistication and reliability of adhesive joints modeling. The book proposed intends to provide the designer with the most advanced stress analyses techniques in adhesive joints to reinforce the use of this promising bonding technique.
Download or read book Adhesively Bonded Joints written by W. Steven Johnson and published by ASTM International. This book was released on 1988 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Modeling and Design of Adhesively Bonded Systems written by S. Kumar and published by John Wiley & Sons. This book was released on 2013-05-29 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book comprehensively charts a way for industry to employ adhesively bonded joints to make systems more efficient and cost-effective Adhesively bonded systems have found applications in a wide spectrum of industries (e.g., aerospace, electronics, construction, ship building, biomedical, etc.) for a variety of purposes. Emerging adhesive materials with improved mechanical properties have allowed adhesion strength approaching that of the bonded materials themselves. Due to advances in adhesive materials and the many potential merits that adhesive bonding offers, adhesive bonding has replaced other joining methods in many applications. Containing nine articles written by world-renowned experts, the book deals with the advances in theoretical and computational modeling as well as the design and experimental aspects of adhesively bonded structural systems. Stress analysis and strength prediction of adhesively bonded structural systems, considering a range of material models under a variety of loading conditions, are discussed. Finite element modeling using macro-elements is elaborated on. Recent developments in modeling and experimental aspects of bonded systems with graded adhesive layers and dual adhesives are described. Simulation of progressive damage in bonded joints is addressed. A novel vibration-based approach to detect disbonding and delamination in composite joints is also discussed. Readership The book is central to a range of engineers including mechanical, reliability, construction and surface engineers as well as materials scientists who are engaged in the mechanics of structural adhesive joints. Industries that will use this book include aerospace, electronics, biomedical, automotive, ship building, and construction.
Download or read book Adhesion and Adhesives written by Anthony J. Kinloch and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last decade, or so, the growth in the use of adhesives, especially in ever more technically demanding applications, has been rapid and many major developments in the technology of adhesives have been reported. This growth has also led to attention being focused on somewhat more basic studies of the science of adhesion and adhesives, and in recent years our level of fundamental knowledge concerning the formation and mechanical performance of adhesive joints has increased dramatically. Such studies have, of course, been aided greatly by the development of the tools at the disposal of the investigators. For example, specific surface analytical techniques, such as X-ray photoelectron and secondary-ion mass spectroscopy, and the increasingly sophisticated methods of stress analysis and fracture mechanics have been put to good use in furthering our understanding of the science of adhesion and adhesives. The present book attempts to review the multidisciplined subject of adhesion and adhesives, considering both the science and technology involved in the formation and mechanical performance of adhesive joints. The author would like to thank his friends and colleagues for useful discus sions and help in the preparation of this book. I am particularly grateful to P. Cawley, J. Comyn, W. A. Lees, A. C. Roulin-Moloney, W. C. Wake, J. G. Williams and R. J. Young who have read and commented on various chapters and P. Farr for preparing the diagrams.
Download or read book Analysis and Design of Structural Bonded Joints written by Liyong Tong and published by Springer. This book was released on 2014-02-23 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: 254 7. 2 AEROSPACE 261 7. 3 MARINE 265 7. 4 GROUND TRANSPORTATION 268 7. 5 CNIL 270 References 285 Index Preface Most structures consist of an assembly of a number of individual components that must be connected to form an integral load transmission path. These connections are often referred to as joints and can be achieved in a variety of forms, e. g. by bolting, riveting, or other forms of mechanical fastening, or by welding or brazing for connecting metallic elements, or by adhesive bonding. No matter what forms of connections are used in the structure, these joints are potentially the weakest points in the structure and the locations where a weight penalty may apply. Thus structural joints must be designed adequately to meet the specific design requirements. Adhesive bonding represents one of the most important enabling technologies for developing innovative design concepts and structural configurations as well as exploiting new materials. The evolution of adhesive bonding technology, and its current knowledge base, was made possibly by the explosive growth in the adhesive applications in a great variety of industries over the past few decades. While it is easy for everyone to identify examples of adhesive bonding in the world around us, analysis and design of structural bonded joints represent one of the most challenging jobs in structural design and manufacturing. Compared to other joining methods, particularly mechanical fastening, adhesive bonding can offer substantial performance and economic advantages.
Download or read book Strength Prediction of Adhesively Bonded Joints written by Raul D. S. G. Campilho and published by CRC Press. This book was released on 2017-05-25 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesively-bonded joints provide many advantages over conventional mechanical fasteners and are increasingly receiving attention as an alternative to mechanical joints in engineering applications. The traditional fasteners usually result in the cutting of fibers and hence the introduction of stress concentrations, both of which reduce structural integrity. By contrast, bonded joints are more continuous and have potential advantages of strength-to-weight ratio, design flexibility, and ease of fabrication. This book provides an overview of available analytical methods as well as numerical methods.
Download or read book Structural Adhesive Joints in Engineering written by R. D. Adams and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intention of this book is that it should contain everything an engineer needs to know to be able to design and produce adhesively bonded joints which are required to carry significant loads. The advan tages and disadvantages of bonding are given, together with a sufficient understanding of the necessary mechanics and chemistry to enable the designer to make a sound engineering judgement in any particular case. The stresses in joints are discussed extensively so that the engineer can get sufficient philosophy or feel for them, or can delve more deeply into the mathematics to obtain quantitative solutions even with elasto plastic behaviour. A critical description is given of standard methods of testing adhesives, both destructively and non-destructively. The essen tial chemistry of adhesives and the importance of surface preparation are described and guidance is given for adhesive selection by me ans of check lists. For many applications, there will not be a unique adhesive which alone is suitable, and factors such as cost, convenience, produc tion considerations or familiarity may be decisive. A list of applications is given as examples. The authors wish to increase the confidence of engineers using adhesive bonding in load-bearing applications by the information and experience presented. With increasing experience of adhesives en gineering, design will become more elegant as weH as more fitted to its products.
Download or read book Adhesive Joints Formation Characteristics and Testing written by Kash L. Mittal and published by CRC Press. This book was released on 2023-01-27 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the Second International Symposium on Adhesive Joints: Formation, Characteristics and Testing held in Newark, NJ, May 22-24, 2000. Since the first symposium, held in 1982, there had been tremendous research activity dealing with many aspects of adhesive joints. This volume contains a total of 21 papers, which were all properly peer reviewed, revised and edited before inclusion. Therefore, this book is not merely a collection of unreviewed manuscripts, but rather represents information which has passed peer scrutiny. Furthermore, the authors were asked to update their manuscripts, so the information contained in this book should be current and fresh. The book is divided into three parts: 1) General Papers; 2) Evaluation, Analysis and Testing; and 3) Durability Aspects. The topics covered include: molecular brush concepts in enhancing strength of adhesive joints; factors affecting performance of adhesive joints; substrate preparation and modification; interfacial/interphasial aspects; determination of locus of failure; analysis and evaluation of adhesive joints using various techniques; testing of adhesive joints; stress analysis; application of fracture mechanics; durability aspects; accelerated environmental degradation of adhesive joints; solvent uptake; and adhesives with special characteristics. This volume represents a commentary on the current R&D activity in this arena and it should be of great value and interest to anyone interested in adhesive bonding / adhesive joints. Furthermore, this volume contains a number of excellent review/overview articles, which should be of particular value.
Download or read book The Mechanics of Adhesives in Composite and Metal Joints written by Magd Abdel Wahab and published by DEStech Publications, Inc. This book was released on 2014-04-07 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific background and practical methods for modeling adhered joints Tools for analyzing stress, fracture, fatigue crack propagation, thermal, diffusion and coupled thermal-stress/diffusion-stress, as well as life prediction of joints Book includes access to downloadable macrofiles for ANSYS This text investigates the mechanics of adhesively bonded composite and metallic joints using finite element analysis, and more specifically, ANSYS, the basics of which are presented. The book provides engineers and scientists with the technical know-how to simulate a variety of adhesively bonded joints using ANSYS. It explains how to model stress, fracture, fatigue crack propagation, thermal, diffusion and coupled field analysis of the following: single lap, double lap, lap strap/cracked lap shear, butt and cantilevered beam joints. Readers receive free digital access to a variety of input and program data, which can be downloaded as macrofiles for modeling with ANSYS.
Download or read book Structural Adhesive Joints written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2020-09-01 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely book on structural adhesives joints showcases all the pertinent topics and will be of immense value to scientists and engineers in many industries. Most structures are comprised of a number of individual parts or components which have to be connected to form a system with integral load transmission path. The structural adhesive bonding represents one of the most enabling technologies to fabricate most complex structural configurations involving advanced materials (e.g. composites) for load-bearing applications. Quite recently there has been a lot of activity in harnessing nanotechnology (use of nanomaterials) in ameliorating the existing or devising better performing structural adhesives. The 10 chapters by subject matter experts look at the following issues: Surface preparation for structural adhesive joints (SAJ) Use of nanoparticles in enhancing performance of SAJ Optimization of SAJ Durability aspects of SAJ Debonding of SAJ Fracture mechanics of SAJ Failure analysis of SAJ Damage behavior in functionally graded SAJ Impact, shock and vibration characteristics of composites for SAJ Delamination arrest methods in SAJ
Download or read book Stress Analysis of Single Lap Adhesive Bonded Joints written by Gaurang Choksi and published by . This book was released on 1984 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Analysis of Structural Joints with Composite Materials written by Rikard Benton Heslehurst and published by DEStech Publications, Inc. This book was released on 2013 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Book presents a comprehensive set of design and analysis equations, as well as technical steps, to enable engineers and technicians to produce and test effective structural joints using composite materials and explaining how composites joints differ from ones made of metal.
Download or read book Advances in Numerical Modeling of Adhesive Joints written by Lucas Filipe Martins da Silva and published by Springer Science & Business Media. This book was released on 2011-10-15 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the most recent numerical modeling of adhesive joints. Advances in damage mechanics and extended finite element method are described in the context of the Finite Element method with examples of application. The book also introduces the classical continuum mechanics and fracture mechanics approach and discusses the boundary element method and the finite difference method with indication of the cases they are most adapted to. At the moment there a no numerical technique that can solve any problem and the analyst needs to be aware of the limitations involved in each case.
Download or read book Handbook of Adhesion Technology written by Lucas F. M. da Silva and published by Springer. This book was released on 2011-08-10 with total page 1554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesives have been used for thousands of years, but until 100 years ago, the vast majority was from natural products such as bones, skins, fish, milk, and plants. Since about 1900, adhesives based on synthetic polymers have been introduced, and today, there are many industrial uses of adhesives and sealants. It is difficult to imagine a product—in the home, in industry, in transportation, or anywhere else for that matter—that does not use adhesives or sealants in some manner. The Handbook of Adhesion Technology is intended to be the definitive reference in the field of adhesion. Essential information is provided for all those concerned with the adhesion phenomenon. Adhesion is a phenomenon of interest in diverse scientific disciplines and of importance in a wide range of technologies. Therefore, this handbook includes the background science (physics, chemistry and materials science), engineering aspects of adhesion and industry specific applications. It is arranged in a user-friendly format with ten main sections: theory of adhesion, surface treatments, adhesive and sealant materials, testing of adhesive properties, joint design, durability, manufacture, quality control, applications and emerging areas. Each section contains about five chapters written by internationally renowned authors who are authorities in their fields. This book is intended to be a reference for people needing a quick, but authoritative, description of topics in the field of adhesion and the practical use of adhesives and sealants. Scientists and engineers of many different backgrounds who need to have an understanding of various aspects of adhesion technology will find it highly valuable. These will include those working in research or design, as well as others involved with marketing services. Graduate students in materials, processes and manufacturing will also want to consult it.
Download or read book Design and Analysis of Functionally Graded Adhesively Bonded Joints of FRP Composites written by Sashi Kanta Panigrahi and published by CRC Press. This book was released on 2022-12-30 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides up-to-date information relevant to the analysis and design of adhesively bonded joints made up of fiber-reinforced polymer (FRP) composites using functionally graded adhesive (FGA). Damage behaviors in adhesively bonded joints of laminated FRP composites have been addressed, and joint configurations have been modeled using special finite elements (FEs) and multipoint constraint elements to simulate the contact behavior. Detailed 3D finite element analyses (FEAs) have been presented for different adhesively bonded joint structures along with guidelines for effective design philosophy of adhesively bonded joints in laminated FRP structures using FGA. Features: Provides a thorough and systematic discussion on the functionally graded adhesive and its joints. Discusses analytical modeling and numerical analyses of the joints. Details 3D stress and failure delamination analysis for composite analyses of functionally graded out-of-plane joints under various combinations of loading. Illustrates FE modeling and simulation of interfacial failure and damage propagation in out-of-plane joints. Includes the effect of various gradation function profiles on damage growth driving forces (SERR). This book is aimed at researchers, professionals and graduate students in composites, infrastructure engineering, bonding technology and mechanical/aerospace engineering.
Download or read book A Critical Examination of Stresses in an Elastic Single Lap Joint written by Paul A. Cooper and published by . This book was released on 1979 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt:
