Download or read book Stream of variation Modeling and Analysis of Multi operational Machining Processes written by Qiang Huang and published by . This book was released on 2003 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stream of Variation Modeling and Analysis for Multistage Manufacturing Processes written by Jianjun Shi and published by CRC Press. This book was released on 2006-12-04 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Variability arises in multistage manufacturing processes (MMPs) from a variety of sources. Variation reduction demands data fusion from product/process design, manufacturing process data, and quality measurement. Statistical process control (SPC), with a focus on quality data alone, only tells half of the story and is a passive method, taking corre
Download or read book Proceedings of the 6th CIRP Sponsored International Conference on Digital Enterprise Technology written by George Q. Huang and published by Springer Science & Business Media. This book was released on 2009-12-12 with total page 1754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings volume contains articles presented at the CIRP-Sponsored Inter- tional Conference on Digital Enterprise Technology (DET2009) that takes place December 14–16, 2009 in Hong Kong. This is the 6th DET conference in the series and the first to be held in Asia. Professor Paul Maropoulos initiated, hosted and chaired the 1st International DET Conference held in 2002 at the University of D- ham. Since this inaugural first DET conference, DET conference series has been s- cessfully held in 2004 at Seattle, Washington USA, in 2006 at Setubal Portugal, in 2007 at Bath England, and in 2008 at Nantes France. The DET2009 conference continues to bring together International expertise from the academic and industrial fields, pushing forward the boundaries of research kno- edge and best practice in digital enterprise technology for design and manufacturing, and logistics and supply chain management. Over 120 papers from over 10 countries have been accepted for presentation at DET2009 and inclusion in this Proceedings volume after stringent refereeing process. On behalf of the organizing and program committees, the Editors are grateful to the many people who have made DET2009 possible: to the authors and presenters, es- cially the keynote speakers, to those who have diligently reviewed submissions, to members of International Scientific Committee, Organizing Committee and Advisory Committes, and to colleagues for their hard work in sorting out all the arrangements. We would also like to extend our gratitude to DET2009 sponsors, co-organizers, and supporting organizations.
Download or read book 5th International Conference on Digital Enterprise Technology written by Alain Bernard and published by Editions Publibook. This book was released on 2010 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Enterprise Technology (DET) is more than a concept. Companies arc facing new challenges in a context where the references are mostly numerical. Nowadays, digital methods and tools arc widely generalized. DET 2008 allowed excellent exchanges about "the collection of systems and methods for the digital modelling and analysis of the global product development and realisation process, in the context of lifecycle management". This book of proceedings gives a short vices of the keynotes and proposes the text of the papers that have been presented during DET 2008. This gives a clear view of the actual state of the art and of the industrial needs. This book of proceedings is organized with respect to the topics that were addressed during the conference.
Download or read book Interdisciplinary Design Proceedings of the 21st CIRP Design Conference written by and published by Mary Kathryn Thompson. This book was released on with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stream of Variation SOV Modeling of Machining Errors and Its Applications written by Dragan Djurdjanovic and published by . This book was released on 2002 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 22nd International Conference on Industrial Engineering and Engineering Management 2015 written by Ershi Qi and published by Springer. This book was released on 2016-01-29 with total page 927 pages. Available in PDF, EPUB and Kindle. Book excerpt: Being the premier forum for the presentation of new advances and research results in the fields of Industrial Engineering, IEEM 2015 aims to provide a high-level international forum for experts, scholars and entrepreneurs at home and abroad to present the recent advances, new techniques and applications face and face, to promote discussion and interaction among academics, researchers and professionals to promote the developments and applications of the related theories and technologies in universities and enterprises, and to establish business or research relations to find global partners for future collaboration in the field of Industrial Engineering. All the goals of the international conference are to fulfill the mission of the series conference which is to review, exchange, summarize and promote the latest achievements in the field of industrial engineering and engineering management over the past year, and to propose prospects and vision for the further development. This volume is the first of the two proceedings volumes from this conference.
Download or read book Manufacturing Engineering and Materials Handling 2005 written by and published by . This book was released on 2005 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2008 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Service Orientation in Holonic and Multi Agent Manufacturing written by Theodor Borangiu and published by Springer. This book was released on 2018-01-31 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the peer-reviewed papers presented at the seventh edition of the international workshop "Service Orientation in Holonic and Multi-Agent Manufacturing - SOHOMA'17", held on October 19-20, 2017 and organized by the University of Nantes, France in collaboration with the CIMR Research Centre in Computer Integrated Manufacturing and Robotics at the University Politehnica of Bucharest, Romania, the LAMIH Laboratory of Industrial and Human Automation Control, Mechanical Engineering and Computer Science at the University of Valenciennes and Hainaut-Cambrésis, France and the CRAN Research Centre for Automatic Control, Nancy at the University of Lorraine, France. The main objective of SOHOMA'17 was to foster innovation in smart and sustainable manufacturing and logistics systems and in this context to promote concepts, methods and solutions addressing trends in service orientation of agent-based control technologies with distributed intelligence. The book is organized in eight parts, each with a number of chapters describing research in current domains of the digital transformation in manufacturing and trends in future service and computing oriented manufacturing control: Part 1: Advanced Manufacturing Control, Part 2: Big Data Management, Part 3: Cyber-Physical Production Systems, Part 4: Cloud- and Cyber-Physical Systems for Smart and Sustainable Manufacturing, Part 5: Simulation for Physical Internet and Intelligent & Sustainable Logistics Systems, Part 6: Formal Methods and Advanced Scheduling for Future Industrial Systems, Part 7: Applications and Demonstrators, Part 8: Production and Logistic Control Systems. The contributions focus on how the digital transformation, such as the one advocated by "Industry 4.0" or "Industry of the future" concepts, can improve the maintainability and the sustainability of manufacturing processes, products, and logistics. Digital transformation relates to the interaction between the physical and informational worlds and is realized by virtualization of products, processes and resources managed as services.
Download or read book American Doctoral Dissertations written by and published by . This book was released on 2002 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intelligent Robotics and Applications written by Caihua Xiong and published by Springer Science & Business Media. This book was released on 2008-09-29 with total page 1288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two volumes constitute the refereed proceedings of the First International Conference on Intelligent Robotics and Applications, ICIRA 2008, held in Wuhan, China, in October 2008. The 265 revised full papers presented were thoroughly reviewed and selected from 552 submissions; they are devoted but not limited to robot motion planning and manipulation; robot control; cognitive robotics; rehabilitation robotics; health care and artificial limb; robot learning; robot vision; human-machine interaction & coordination; mobile robotics; micro/nano mechanical systems; manufacturing automation; multi-axis surface machining; realworld applications.
Download or read book Global Product Development written by Alain Bernard and published by Springer Science & Business Media. This book was released on 2011-05-05 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book of proceedings is the synthesis of all the papers, including keynotes presented during the 20th CIRP Design conference. The book is structured with respect to several topics, in fact the main topics that serve at structuring the program. For each of them, high quality papers are provided. The main topic of the conference was Global Product Development. This includes technical, organizational, informational, theoretical, environmental, performance evaluation, knowledge management, and collaborative aspects. Special sessions were related to innovation, in particular extraction of knowledge from patents.
Download or read book Advances in Battery Manufacturing Service and Management Systems written by Jingshan Li and published by John Wiley & Sons. This book was released on 2016-09-19 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses the methodology and theoretical foundation of battery manufacturing, service and management systems (BM2S2), and discusses the issues and challenges in these areas This book brings together experts in the field to highlight the cutting edge research advances in BM2S2 and to promote an innovative integrated research framework responding to the challenges. There are three major parts included in this book: manufacturing, service, and management. The first part focuses on battery manufacturing systems, including modeling, analysis, design and control, as well as economic and risk analyses. The second part focuses on information technology’s impact on service systems, such as data-driven reliability modeling, failure prognosis, and service decision making methodologies for battery services. The third part addresses battery management systems (BMS) for control and optimization of battery cells, operations, and hybrid storage systems to ensure overall performance and safety, as well as EV management. The contributors consist of experts from universities, industry research centers, and government agency. In addition, this book: Provides comprehensive overviews of lithium-ion battery and battery electrical vehicle manufacturing, as well as economic returns and government support Introduces integrated models for quality propagation and productivity improvement, as well as indicators for bottleneck identification and mitigation in battery manufacturing Covers models and diagnosis algorithms for battery SOC and SOH estimation, data-driven prognosis algorithms for predicting the remaining useful life (RUL) of battery SOC and SOH Presents mathematical models and novel structure of battery equalizers in battery management systems (BMS) Reviews the state of the art of battery, supercapacitor, and battery-supercapacitor hybrid energy storage systems (HESSs) for advanced electric vehicle applications Advances in Battery Manufacturing, Services, and Management Systems is written for researchers and engineers working on battery manufacturing, service, operations, logistics, and management. It can also serve as a reference for senior undergraduate and graduate students interested in BM2S2.
Download or read book Advanced Modeling and Optimization of Manufacturing Processes written by R. Venkata Rao and published by Springer Science & Business Media. This book was released on 2010-12-01 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Modeling and Optimization of Manufacturing Processes presents a comprehensive review of the latest international research and development trends in the modeling and optimization of manufacturing processes, with a focus on machining. It uses examples of various manufacturing processes to demonstrate advanced modeling and optimization techniques. Both basic and advanced concepts are presented for various manufacturing processes, mathematical models, traditional and non-traditional optimization techniques, and real case studies. The results of the application of the proposed methods are also covered and the book highlights the most useful modeling and optimization strategies for achieving best process performance. In addition to covering the advanced modeling, optimization and environmental aspects of machining processes, Advanced Modeling and Optimization of Manufacturing Processes also covers the latest technological advances, including rapid prototyping and tooling, micromachining, and nano-finishing. Advanced Modeling and Optimization of Manufacturing Processes is written for designers and manufacturing engineers who are responsible for the technical aspects of product realization, as it presents new models and optimization techniques to make their work easier, more efficient, and more effective. It is also a useful text for practitioners, researchers, and advanced students in mechanical, industrial, and manufacturing engineering.
Download or read book University of Michigan Official Publication written by University of Michigan and published by UM Libraries. This book was released on 2000 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Each number is the catalogue of a specific school or college of the University.
Download or read book Advances in Asset Management and Condition Monitoring written by Andrew Ball and published by Springer Nature. This book was released on 2020-08-27 with total page 1525 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers select contributions from the 32nd International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2019), held at the University of Huddersfield, UK in September 2019, and jointly organized by the University of Huddersfield and COMADEM International. The aim of the Congress was to promote awareness of the rapidly emerging interdisciplinary areas of condition monitoring and diagnostic engineering management. The contents discuss the latest tools and techniques in the multidisciplinary field of performance monitoring, root cause failure modes analysis, failure diagnosis, prognosis, and proactive management of industrial systems. There is a special focus on digitally enabled asset management and covers several topics such as condition monitoring, maintenance, structural health monitoring, non-destructive testing and other allied areas. Bringing together expert contributions from academia and industry, this book will be a valuable resource for those interested in latest condition monitoring and asset management techniques.
