Download or read book Strain Hardening Cement Based Composites written by Viktor Mechtcherine and published by Springer. This book was released on 2017-09-04 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the proceedings of the 4th International Conference on Strain-Hardening Cement-Based Composites (SHCC4), that was held at the Technische Universität Dresden, Germany from 18 to 20 September 2017. The conference focused on advanced fiber-reinforced concrete materials such as strain-hardening cement-based composites (SHCC), textile-reinforced concrete (TRC) and high-performance fiber-reinforced cement-based composites (HPFRCC). All these new materials exhibit pseudo-ductile behavior resulting from the formation of multiple, fine cracks when subject to tensile loading. The use of such types of fiber-reinforced concrete could revolutionize the planning, development, dimensioning, structural and architectural design, construction of new and strengthening and repair of existing buildings and structures in many areas of application. The SHCC4 Conference was the follow-up of three previous successful international events in Stellenbosch, South Africa in 2009, Rio de Janeiro, Brazil in 2011, and Dordrecht, The Netherlands in 2014.

Download or read book Strain Hardening Cement Composites Structural Design and Performance written by Kanakubo Toshiyuki and published by Springer Science & Business Media. This book was released on 2012-09-25 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strain Hardening Cement Composites, SHCC hereafter, demonstrate excellent mechanical behavior showing tensile strain hardening and multiple fine cracks. This strain hardening behavior improves the durability of concrete structures employing SHCC and the multiple fine cracks enhance structural performance. Reliable tensile performance of SHCC enables us to design structures explicitly accounting for SHCC’s tensile properties. Reinforced SHCC elements (R/SHCC) indicate large energy absorbing performance under large seismic excitation. Against various types of loads, R/SHCC elements can be designed by superimposing re-bar performance and SHCC’s tensile performance. This report focuses on flexural design, shear design, FE modeling and anti-seismic design of R/SHCC elements as well as application examples. Establishing design methods for new materials usually leads to exploring application areas and this trend should be demonstrated by collecting actual application examples of SHCC in structures.

Download or read book Engineered Cementitious Composites ECC written by Victor C. Li and published by Springer. This book was released on 2019-04-30 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book on Engineered Cementitious Composites (ECC), an advanced concrete material attracting world-wide attention in both the academic community and in industry. The book presents a comprehensive coverage of the material design methodology, processing methodology, mechanical and durability properties, smart functions, and application case studies. It combines effective use of illustrations, graphical data, and tables. It de-emphasizes mathematics in favor of physical understanding. The book serves as an introduction to the subject matter, or as a reference to those conducting research in ECC. It will also be valuable to engineers who need to quickly search for relevant information in a single comprehensive text.

Download or read book Fibre Reinforced Concrete Improvements and Innovations written by Pedro Serna and published by Springer Nature. This book was released on 2020-11-05 with total page 1180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of fibre reinforced concrete (FRC) and discusses a diverse range of topics concerning FRC: rheology and early-age properties, mechanical properties, codes and standards, long-term properties, durability, analytical and numerical models, quality control, structural and Industrial applications, smart FRC’s, nanotechnologies related to FRC, textile reinforced concrete, structural design and UHPFRC. The contributions present improved traditional and new ideas that will open novel research directions and foster multidisciplinary collaboration between different specialists. Although the symposium was postponed, the book gathers peer-reviewed papers selected in 2020 for the RILEM-fib International Symposium on Fibre Reinforced Concrete (BEFIB).

Download or read book Recent Advances in Nano Tailored Multi Functional Cementitious Composites written by Mustafa Şahmaran and published by Woodhead Publishing. This book was released on 2022-03-08 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few years, concrete technology has advanced quite dramatically thanks to the use of a great variety of additives and admixtures, which have paved the way for the effective development of new-generation concrete mixtures. Among these additives and admixtures, nanomaterials used in construction materials such as paste, mortar, and concrete mixtures have become very popular recently. Much of the previous attention in regard to the utilization of nanomaterials in construction materials was specifically devoted to the characterization of their fresh-state, hydration, microstructure, pore structure, mechanical, transport, and durability properties. However, research into the tailoring of multi-functional properties of construction materials (especially cementitious) with the use of nanomaterials is still in its infancy. Recent Advances in Nano-Tailored Multi-Functional Cementitious Composites aims to capture recent major scientific advances and the current state of the art in multi-functional cementitious composites developed with nanomaterials. The book will provide researchers, engineers, and other stakeholders with an insight into future directions of multi-functional capabilities of cementitious composites. Chapters focus on the large-scale development, characterization, and application of multi-functional cementitious composites addressing the following topics: nano-modified concrete; strain-hardening cementitious composites; self-sensing concrete; self-healing and bacteria-based concrete; self-cleaning concrete; self-consolidating concrete; material/construction technology for 3D printing; thermal insulation capability; green concretes including geopolymer concrete; nanoscale characterization methods; low CO2 reactive magnesia cements; and future developments and challenges of nano-tailored cementitious composites. The book will be an essential reference resource for academic and industrial researchers, materials scientists, and civil engineers working on the development and application of nano-tailored multi-functional cementitious composites. - Provides very comprehensive and unique details about multi-functional properties of cementitious composites - Presents a detailed account of investigations conducted into the application of nanomaterials and nanoscale tailoring to achieve multi-functional properties for cementitious composites - Features state-of-the-art preparation, production, processing, and implementation techniques of nanoscale tailoring of multi-functional cementitious composites starting from laboratory to large scale

Download or read book Mechanics of Fiber and Textile Reinforced Cement Composites written by Barzin Mobasher and published by CRC Press. This book was released on 2011-09-20 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among all building materials, concrete is the most commonly used-and there is a staggering demand for it. However, as we strive to build taller structures with improved seismic resistance or durable pavement with an indefinite service life, we require materials with better performance than the conventional materials used today. Considering the enor

Download or read book Second RILEM International Conference on Concrete and Digital Fabrication written by Freek P. Bos and published by Springer Nature. This book was released on 2020-07-08 with total page 1209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held online and hosted by the Eindhoven University of Technology, the Netherlands from 6-9 July 2020. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.

Download or read book Textile Reinforced Cement Composites written by Jan Wastiels and published by MDPI. This book was released on 2020-03-05 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue presents the latest advances in the field of Textile-Reinforced Cement Composites, including Textile-Reinforced Concrete (TRC), Textile-Reinforced Mortar (TRM), Fabric-Reinforced Cementitious Matrix (FRCM), etc. These composite materials distinguish themselves from other fibre-reinforced concrete materials by their strain-hardening behaviour under tensile loading. This Special Issue is composed of 14 papers covering new insights in structural and material engineering. The papers include investigations on the level of the fibre reinforcement system as well as on the level of the composites, investigating their impact and fatigue behaviour, durability and fire behaviour. Both the strengthening of existing structures and the development of new structural systems such as lightweight sandwich systems are presented, and analysis and design methods are discussed. This Special Issue demonstrates the broadness and intensity of the ongoing advancements in the field of Textile-Reinforced Cement composites and the importance of several future research directions.

Download or read book Calcined Clays for Sustainable Concrete written by Shashank Bishnoi and published by Springer Nature. This book was released on 2020-04-13 with total page 845 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises the proceedings of the Third International Conference on Calcined Clays for Sustainable Concrete held in New Delhi, India in October 2019. The papers cover topics related to geology of clay, hydration and performance of blended systems with calcined clays, alkali activated binders, and economic and environmental impacts of the use of calcined clays in cement-based materials. The book presents research on influence of processing on reactivity of calcined clays, influence of clay mineralogy on reactivity, geology of clay deposits, and the environmental impact of use of calcined clays in cement and concrete and field applications of calcined clay in concrete. Apart from giving an overview of the progress of research during the last two years, this work also covers the state-of-the art on the practical aspects of production and use of calcined clays in construction. The contents of this volume will prove useful to researchers and graduate students working in the areas of cement chemistry, cement production, and concrete design.

Download or read book Seismic Design and Retrofit of Bridges written by M. J. N. Priestley and published by John Wiley & Sons. This book was released on 1996-04-12 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of their structural simplicity, bridges tend to beparticularly vulnerable to damage and even collapse when subjectedto earthquakes or other forms of seismic activity. Recentearthquakes, such as the ones in Kobe, Japan, and Oakland,California, have led to a heightened awareness of seismic risk andhave revolutionized bridge design and retrofit philosophies. In Seismic Design and Retrofit of Bridges, three of the world's topauthorities on the subject have collaborated to produce the mostexhaustive reference on seismic bridge design currently available.Following a detailed examination of the seismic effects of actualearthquakes on local area bridges, the authors demonstrate designstrategies that will make these and similar structures optimallyresistant to the damaging effects of future seismicdisturbances. Relying heavily on worldwide research associated with recentquakes, Seismic Design and Retrofit of Bridges begins with anin-depth treatment of seismic design philosophy as it applies tobridges. The authors then describe the various geotechnicalconsiderations specific to bridge design, such as soil-structureinteraction and traveling wave effects. Subsequent chapters coverconceptual and actual design of various bridge superstructures, andmodeling and analysis of these structures. As the basis for their design strategies, the authors' focus is onthe widely accepted capacity design approach, in which particularlyvulnerable locations of potentially inelastic flexural deformationare identified and strengthened to accommodate a greater degree ofstress. The text illustrates how accurate application of thecapacity design philosophy to the design of new bridges results instructures that can be expected to survive most earthquakes withonly minor, repairable damage. Because the majority of today's bridges were built before thecapacity design approach was understood, the authors also devoteseveral chapters to the seismic assessment of existing bridges,with the aim of designing and implementing retrofit measures toprotect them against the damaging effects of future earthquakes.These retrofitting techniques, though not considered appropriate inthe design of new bridges, are given considerable emphasis, sincethey currently offer the best solution for the preservation ofthese vital and often historically valued thoroughfares. Practical and applications-oriented, Seismic Design and Retrofit ofBridges is enhanced with over 300 photos and line drawings toillustrate key concepts and detailed design procedures. As the onlytext currently available on the vital topic of seismic bridgedesign, it provides an indispensable reference for civil,structural, and geotechnical engineers, as well as students inrelated engineering courses. A state-of-the-art text on earthquake-proof design and retrofit ofbridges Seismic Design and Retrofit of Bridges fills the urgent need for acomprehensive and up-to-date text on seismic-ally resistant bridgedesign. The authors, all recognized leaders in the field,systematically cover all aspects of bridge design related toseismic resistance for both new and existing bridges. * A complete overview of current design philosophy for bridges,with related seismic and geotechnical considerations * Coverage of conceptual design constraints and their relationshipto current design alternatives * Modeling and analysis of bridge structures * An exhaustive look at common building materials and theirresponse to seismic activity * A hands-on approach to the capacity design process * Use of isolation and dissipation devices in bridge design * Important coverage of seismic assessment and retrofit design ofexisting bridges

Download or read book Structural Health Monitoring and Engineering Structures written by Tinh Quoc Bui and published by Springer Nature. This book was released on 2021-06-10 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the select proceedings of International Conference on Structural Health Monitoring and Engineering Structures (SHM&ES) 2020. It brings together different applied and technological aspects of structural health monitoring. The main topics covered in this book include damage assessment, structural health monitoring, engineering fracture mechanics, Inverse problem using optimization techniques, machine learning, deep learning, Artificial intelligent and non-destructive evaluation. It will be a reference for professionals and students in the areas of civil engineering, applied natural sciences and engineering management.

Download or read book First RILEM International Conference on Concrete and Digital Fabrication Digital Concrete 2018 written by Timothy Wangler and published by Springer. This book was released on 2018-08-29 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital fabrication has been termed the “third industrial revolution”, and is promising to revolutionize many disciplines, including most recently the construction sector. Both academia and industry see immense promise in cementitious materials, which lend themselves well to additive manufacturing techniques for digital fabrication in construction. With this recent trend and high interest in this new research field, the 1st RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2018) was organized. Since 2014, ETH Zurich has been host for the Swiss National Centre for Competence in Research (NCCR) for Digital Fabrication in Architecture, which is highly interdisciplinary and unique worldwide. In 2018, this NCCR opened the “DFAB House”, which incorporates many digital fabrication principles for architecture. It is also responsible for the 600 m2 Robotic Fabrication Lab and the first robotically built roof in the world. Held in tandem with Rob|Arch 2018, the leading conference for robotics in architecture, RILEM deemed it the right time to combine forces at this new conference, which will be the first large conference to feature the work of the recently created RILEM Technical Committee on Digital Fabrication with Cement-based Materials, among other leaders in this new field worldwide. This conference proceedings brings together papers that take into account the findings in this new area. Papers reflect the varying themes of the conference, including Materials, Processing, Structure, and Applications.

Download or read book Corrosion of Steel in Concrete written by Luca Bertolini and published by John Wiley & Sons. This book was released on 2013-02-26 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel-reinforced concrete is used ubiquitously as a building material due to its unique combination of the high compressive strength of concrete and the high tensile strength of steel. Therefore, reinforced concrete is an ideal composite material that is used for a wide range of applications in structural engineering such as buildings, bridges, tunnels, harbor quays, foundations, tanks and pipes. To ensure durability of these structures, however, measures must be taken to prevent, diagnose and, if necessary, repair damage to the material especially due to corrosion of the steel reinforcement. The book examines the different aspects of corrosion of steel in concrete, starting from basic and essential mechanisms of the phenomenon, moving up to practical consequences for designers, contractors and owners both for new and existing reinforced and prestressed concrete structures. It covers general aspects of corrosion and protection of reinforcement, forms of attack in the presence of carbonation and chlorides, problems of hydrogen embrittlement as well as techniques of diagnosis, monitoring and repair. This second edition updates the contents with recent findings on the different topics considered and bibliographic references, with particular attention to recent European standards. This book is a self-contained treatment for civil and construction engineers, material scientists, advanced students and architects concerned with the design and maintenance of reinforced concrete structures. Readers will benefit from the knowledge, tools, and methods needed to understand corrosion in reinforced concrete and how to prevent it or keep it within acceptable limits.

Download or read book Fibre Reinforced Concrete Improvements and Innovations II written by Pedro Serna and published by Springer Nature. This book was released on 2021-09-04 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of fibre-reinforced concrete (FRC), as presented by scientists and engineers at the RILEM-fib X International Symposium on Fibre Reinforced Concrete (BEFIB), held in Valencia, Spain, on September 20-22, 2021. It discusses a diverse range of topics concerning FRC: technological aspects, nanotechnologies related with FRC, mechanical properties, long-term properties, analytical and numerical models, structural design, codes and standards, quality control, case studies, Textile-Reinforced Concrete, Geopolymers and UHPFRC. After the symposium postponement in 2020, this new volume concludes the publication of the research works and knowledge of FRC in the frame of BEFIB from 2020 to 2021 with the successful celebration of the hybrid symposium BEFIB 2021. The contributions present traditional and new ideas that will open novel research directions and foster multidisciplinary collaboration between different specialists.

Download or read book High performance Construction Materials written by Caijun Shi and published by World Scientific. This book was released on 2008 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a number of high-performance construction materials, including concrete, steel, fiber-reinforced cement, fiber-reinforced plastics, polymeric materials, geosynthetics, masonry materials and coatings. It discusses the scientific bases for the manufacture and use of these high-performance materials. Testing and application examples are also included, in particular the application of relatively new high-performance construction materials to design practice.Most books dealing with construction materials typically address traditional materials only rather than high-performance materials and, as a consequence, do not satisfy the increasing demands of today''s society. On the other hand, books dealing with materials science are not engineering-oriented, with limited coverage of the application to engineering practice. This book is thus unique in reflecting the great advances made on high-performance construction materials in recent years.This book is appropriate for use as a textbook for courses in engineering materials, structural materials and civil engineering materials at the senior undergraduate and graduate levels. It is also suitable for use by practice engineers, including construction, materials, mechanical and civil engineers.

Download or read book High Performance Fiber Reinforced Cement Composites written by A.E. Naaman and published by CRC Press. This book was released on 1992-04-02 with total page 895 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid advances in materials science and engineering are being made in the field of fibre-reinforced cement composites for use in construction. This book presents the proceedings of a high-level invited workshop in Mainz, Germany in June 1991, held under the auspices of RILEM, The US National Science Foundation, the German Research Community and the American Concrete Institute.

Download or read book Creep Shrinkage and Durability Mechanics of Concrete and Concrete Structures Two Volume Set written by Tada-aki Tanabe and published by CRC Press. This book was released on 2008-09-01 with total page 1540 pages. Available in PDF, EPUB and Kindle. Book excerpt: CREEP, SHRINKAGE AND DURABILITY MECHANICS OF CONCRETE AND CONCRETE STRUCTURES contains the keynote lectures, technical reports and contributed papers presented at the Eighth International Conference on Creep, Shrinkage and Durability of Concrete and Concrete Structures (CONCREEP8, Ise-shima, Japan, 30 September - 2 October 2008). The topics covered