Download or read book Strain Hardening Cement Based Composites written by Viktor Mechtcherine and published by Springer. This book was released on 2017-09-04 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the proceedings of the 4th International Conference on Strain-Hardening Cement-Based Composites (SHCC4), that was held at the Technische Universität Dresden, Germany from 18 to 20 September 2017. The conference focused on advanced fiber-reinforced concrete materials such as strain-hardening cement-based composites (SHCC), textile-reinforced concrete (TRC) and high-performance fiber-reinforced cement-based composites (HPFRCC). All these new materials exhibit pseudo-ductile behavior resulting from the formation of multiple, fine cracks when subject to tensile loading. The use of such types of fiber-reinforced concrete could revolutionize the planning, development, dimensioning, structural and architectural design, construction of new and strengthening and repair of existing buildings and structures in many areas of application. The SHCC4 Conference was the follow-up of three previous successful international events in Stellenbosch, South Africa in 2009, Rio de Janeiro, Brazil in 2011, and Dordrecht, The Netherlands in 2014.
Download or read book Plastic Deformation and Strain Hardening written by P.O. Kettunen and published by Trans Tech Publications Ltd. This book was released on 2003-03-01 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is based upon lectures given during a well-received course on physical metallurgy and originally intended for students specializing in fields related to metallic materials. But, as the author points out, metallic materials are the most widely investigated group of materials and their study therefore gives a good basis for understanding how other materials can be made to reveal interrelationships between their structures and properties; especially with regard to those properties associated with strain. Similar types of rule can then be applied to other materials, in spite of their apparent differences.
Download or read book Strain Hardening Cement Composites Structural Design and Performance written by Kanakubo Toshiyuki and published by Springer Science & Business Media. This book was released on 2012-09-25 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strain Hardening Cement Composites, SHCC hereafter, demonstrate excellent mechanical behavior showing tensile strain hardening and multiple fine cracks. This strain hardening behavior improves the durability of concrete structures employing SHCC and the multiple fine cracks enhance structural performance. Reliable tensile performance of SHCC enables us to design structures explicitly accounting for SHCC’s tensile properties. Reinforced SHCC elements (R/SHCC) indicate large energy absorbing performance under large seismic excitation. Against various types of loads, R/SHCC elements can be designed by superimposing re-bar performance and SHCC’s tensile performance. This report focuses on flexural design, shear design, FE modeling and anti-seismic design of R/SHCC elements as well as application examples. Establishing design methods for new materials usually leads to exploring application areas and this trend should be demonstrated by collecting actual application examples of SHCC in structures.
Download or read book Handbook of Aluminum written by George E. Totten and published by CRC Press. This book was released on 2003-03-27 with total page 1318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Aluminum: Vol. 1: Physical Metallurgy and Processes covers all aspects of the physical metallurgy, analytical techniques, and processing of aluminium, including hardening, annealing, aging, property prediction, corrosion, residual stress and distortion, welding, casting, forging, molten metal processing, machining, rolling, and extrusion. It also features an extensive, chapter-length consideration of quenching.
Download or read book Strain Hardening Cementitious Composites material development performance characterization structural and 3D printing applications written by Kequan Yu and published by Frontiers Media SA. This book was released on 2022-05-10 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Processing and Manufacturing Science written by Rajiv Asthana and published by Elsevier. This book was released on 2006-01-09 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Materials Science in Manufacturing focuses on materials science and materials processing primarily for engineering and technology students preparing for careers in manufacturing. The text also serves as a useful reference on materials science for the practitioner engaged in manufacturing as well as the beginning graduate student.Integrates theoretical understanding and current practices to provide a resource for students preparing for advanced study or career in industry. Also serves as a useful resource to the practitioner who works with diverse materials and processes, but is not a specialist in materials science. This book covers a wider range of materials and processes than is customary in the elementary materials science books.This book covers a wider range of materials and processes than is customary in the elementary materials science books.* Detailed explanations of theories, concepts, principles and practices of materials and processes of manufacturing through richly illustrated text* Includes new topics such as nanomaterials and nanomanufacturing, not covered in most similar works* Focuses on the interrelationship between Materials Science, Processing Science, and Manufacturing Technology
Download or read book Handbook of Workability and Process Design written by George E. Dieter and published by ASM International. This book was released on 2003-01-01 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Atlas of Stress strain Curves written by ASM International and published by ASM International. This book was released on 2002-01-01 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains more than 1400 curves, almost three times as many as in the 1987 edition. The curves are normalized in appearance to aid making comparisons among materials. All diagrams include metric units, and many also include U.S. customary units
Download or read book Mechanical Behavior of Materials written by William F. Hosford and published by Cambridge University Press. This book was released on 2005-05-02 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Aluminum written by John E. Hatch and published by ASM International. This book was released on 1984-01-01 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive information for the American aluminium industry Collective effort of 53 recognized experts on aluminium and aluminium alloys Joint venture by world renowned authorities-the Aluminium Association Inc. and American Society for Metals. The completely updated source of information on aluminium industry as a whole rather than its individual contributors. this book is an opportunity to gain from The knowledge of the experts working for prestigious companies such as Alcoa, Reynolds Metals Co., Alcan International Ltd., Kaiser Aluminium & Chemical Corp., Martin Marietta Laboratories and Anaconda Aluminium Co. It took four years of diligent work to complete this comprehensive successor to the classic volume, Aluminium, published by ASM in 1967. Contents: Properties of Pure Aluminum Constitution of Alloys Microstructure of Alloys Work Hardening Recovery, Recrystalization and Growth Metallurgy of Heat Treatment and General Principles of Precipitation Hardening Effects of Alloying Elements and Impurities on Properties Corrosion Behaviour Properties of Commercial Casting Alloys Properties of Commercial Wrought Alloys Aluminum Powder and Powder Metallurgy Products.
Download or read book Ultimate Limit State Design of Steel Plated Structures written by Jeom Kee Paik and published by John Wiley & Sons. This book was released on 2003-03-28 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel plated structures are important in a variety of marine and land-based applications, including ships, offshore platforms, power and chemical plants, box girder bridges and box girder cranes. The basic strength members in steel plated structures include support members (such as stiffeners and plate girders), plates, stiffened panels/grillages and box girders. During their lifetime, the structures constructed using these members are subjected to various types of loading which is for the most part operational, but may in some cases be extreme or even accidental. Ultimate Limit State Design of Steel Plated Structures reviews and describes both fundamentals and practical design procedures in this field. The derivation of the basic mathematical expressions is presented together with a thorough discussion of the assumptions and the validity of the underlying expressions and solution methods. Particularly valuable coverage in the book includes: * Serviceability and the ultimate limit state design of steel structural systems and their components * The progressive collapse and the design of damage tolerant structures in the context of marine accidents * Age related structural degradation such as corrosion and fatigue cracks Furthermore, this book is also an easily accessed design tool which facilitates learning by applying the concepts of the limit states for practice using a set of computer programs which can be downloaded. In addition, expert guidance on mechanical model test results as well as nonlinear finite element solutions, sophisticated design methodologies useful for practitioners in industries or research institutions, selected methods for accurate and efficient analyses of nonlinear behavior of steel plated structures both up to and after the ultimate strength is reached, is provided. Designed as both a textbook and a handy reference, the book is well suited to teachers and university students who are approaching the limit state design technology of steel plated structures for the first time. The book also meets the needs of structural designers or researchers who are involved in civil, marine and mechanical engineering as well as offshore engineering and naval architecture.
Download or read book Tensile Testing 2nd Edition written by Joseph R. Davis and published by ASM International. This book was released on 2004 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASM Ready Reference written by and published by ASM International. This book was released on 1997-01-01 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: A reference guide covering many properties of engineering alloys: bearing, bending, compression, creep, damping, deformation, elastic, fracture, hardness, shear, tensile, atomic, corrosion, electrical, magnetic, mass, microstructure, surface, thermal, forming, and processing. The description of each
Download or read book Handbook of Metalforming Processes written by Henry Ericsson Theis and published by CRC Press. This book was released on 1999-05-26 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting hands-on experience of materials, equipment, tooling and processes used in the industry, this work provides up-to-date information on flat-rolled sheet metal products. It addresses the processing and forming of light-to-medium-gauge flat-rolled sheet metal, illustrating the versatility and myriad uses of this material.
Download or read book Modern Physical Metallurgy and Materials Engineering written by R. E. Smallman and published by Butterworth-Heinemann. This book was released on 1999-12-08 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sixth edition of Modern Physical Metallurgy provides a comprehensive overview of the structure of matter, the physical properties of materials and their mechanical behaviour and some of the most recent advances in physical metallurgy.
Download or read book Inelastic Deformation of Metals written by Donald C. Stouffer and published by John Wiley & Sons. This book was released on 1996-01-05 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using a totally new approach, this groundbreaking book establishesthe logical connections between metallurgy, materials modeling, andnumerical applications. In recognition of the fact that classicalmethods are inadequate when time effects are present, or whencertain types of multiaxial loads are applied, the new, physicallybased state variable method has evolved to meet these needs.Inelastic Deformation of Metals is the first comprehensivepresentation of this new technology in book form. It developsphysically based, numerically efficient, and accurate methods forpredicting the inelastic response of metals under a variety ofloading and environmental conditions. More specifically, Inelastic Deformation of Metals: * Demonstrates how to use the metallurgical information to developmaterial models for structural simulations and low cyclic fatiguepredictions. It presents the key features of classical and statevariable modeling, describes the different types of models andtheir attributes, and provides methods for developing models forspecial situations. This book's innovative approach covers such newtopics as multiaxial loading, thermomechanical loading, and singlecrystal superalloys. * Provides comparisons between data and theory to help the readermake meaningful judgments about the value and accuracy of aparticular model and to instill an understanding of how metalsrespond in real service environments. * Analyzes the numerical methods associated with nonlinearconstitutive modeling, including time independent, time dependentnumerical procedures, time integration schemes, inversiontechniques, and sub-incrementing. Inelastic Deformation of Metals is designed to give theprofessional engineer and advanced student new and expandedknowledge of metals and modeling that will lead to more accuratejudgments and more efficient designs. In contrast to existing plasticity books, which discuss few if anycorrelations between data and models, this breakthrough volumeshows engineers and advanced students how materials and modelsactually do behave in real service environments. As greater demandsare placed on technology, the need for more meaningful judgmentsand more efficient designs increases dramatically. Incorporatingthe state variable approach, Inelastic Deformation of Metals: * Provides an overview of a wide variety of metal responsecharacteristics for rate dependent and rate independent loadingconditions * Shows the correlations between the mechanical response propertiesand the deformation mechanisms, and describes how to use thisinformation in constitutive modeling * Presents different modeling options and discusses the usefulnessand limitations of each modeling approach, with material parametersfor each model * Offers numerous examples of material response and correlationwith model predictions for many alloys * Shows how to implement nonlinear material models in stand-aloneconstitutive model codes and finite element codes An innovative, comprehensive, and essential book, InelasticDeformation of Metals will help practicing engineers and advancedstudents in mechanical, aerospace, civil, and metallurgicalengineering increase their professional skills in the moderntechnological environment.
Download or read book Fundamentals of Modern Manufacturing written by Mikell P. Groover and published by John Wiley & Sons. This book was released on 2010-01-07 with total page 1027 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers rely on Groover because of the book’s quantitative and engineering-oriented approach that provides more equations and numerical problem exercises. The fourth edition introduces more modern topics, including new materials, processes and systems. End of chapter problems are also thoroughly revised to make the material more relevant. Several figures have been enhanced to significantly improve the quality of artwork. All of these changes will help engineers better understand the topic and how to apply it in the field.
