Download or read book Stoichiometry and Thermodynamics of Metallurgical Processes written by Y. K. Rao and published by CUP Archive. This book was released on 1985-10-31 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1985, this textbook provides a thorough and comprehensive coverage of a wide range of topics in stoichiometry and thermodynamics with special emphasis on applications to metallurgical processes. This book will be welcomed as a text for courses in elementary and advanced thermodynamics and stoichiometry.

Download or read book Principles of Extractive Metallurgy written by Ahindra Ghosh and published by New Age International. This book was released on 1991 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Book Attempts To Present A Comprehensive View Of Extractive Metallurgy, Especially Principles Of Extractive Metallurgy In A Concise Form. This Is The First Book In This Area Which Attempts To Do It. It Has Been Written In Textbook Style. It Presents The Various Concepts Step By Step, Shows Their Importance, Deals With Elementary Quantitative Formulations, And Illustrates Through Quantitative And Qualitative Informations. The Approach Is Such That Even Undergraduate Students Would Be Able To Follow The Topics Without Much Difficulty And Without Much Of A Background In Specialized Subjects. This Is Considered To Be A Very Useful Approach In This Area Of Technology. Moreover The Inter-Disciplinary Nature Of The Subject Has Been Duely Brought Out.While Teaching Concerned Course(S) In The Undergraduate And Postgraduate Level The Authors Felt The Need Of Such A Book. The Authors Found The Books Available On The Subject Did Not Fulfill The Requirements. No Other Book Was Concerned With All Relevant Concepts. Most Of Them Laid Emphasis Either On Thermodynamic Aspects Or On Discussing Unit Processes. Transport Phenomena Are Dealt With In Entirely Different Books. Reactor Concepts Were Again Lying In Chemical Engineering Texts. The Authors Tried To Harmonize And Synthesize The Concepts In Elementary Terms For Metallurgists.The Present Book Contains A Brief Descriptive Summary Of Some Important Metallurgical Unit Processes. Subsequently It Discusses Not Only Physical Chemistry Of Metallurgical Reactions And Processes But Also Rate Phenomena Including Heat And Mass Transfer, Fluid Flow, Mass And Energy Balance, And Elements Of Reactor Engineering. A Variety Of Scientific And Engineering Aspects Of Unit Processes Have Been Discussed With Stress On The Basic Principles All Throughout. There Is An Attempt To Introduce, As Much As Possible, Quantitative Treatments And Engineering Estimates. The Latter May Often Be Approximate From The Point Of View Of Theory But Yields Results That Are Very Valuable To Both Practicing Metallurgists As Well As Others.

Download or read book Treatise on Process Metallurgy written by Roderick Guthrie and published by Elsevier. This book was released on 2024-01-25 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Process Metallurgy: Volume One, Process Fundamentals provides academics with the fundamentals of the manufacturing of metallic materials, from raw materials into finished parts or products. In these fully updated volumes, coverage is expanded into four volumes, including Process Fundamentals, encompassing process fundamentals, structure and properties of matter; thermodynamic aspects of process metallurgy, and rate phenomena in process metallurgy; Processing Phenomena, encompassing interfacial phenomena in high temperature metallurgy, metallurgical process phenomena, and metallurgical process technology; Metallurgical Processes, encompassing mineral processing, aqueous processing, electrochemical material and energy processes, and iron and steel technology, non-ferrous process principles and production technologies, and more. The work distills the combined academic experience from the principal editor and the multidisciplinary four-member editorial board. Provides the entire breadth of process metallurgy in a single work Includes in-depth knowledge in all key areas of process metallurgy Approaches the topic from an interdisciplinary perspective, providing broad range coverage on topics

Download or read book Handbook on Material and Energy Balance Calculations in Material Processing written by Arthur E. Morris and published by John Wiley & Sons. This book was released on 2012-01-03 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lately, there has been a renewed push to minimize the waste of materials and energy that accompany the production and processing of various materials. This third edition of this reference emphasizes the fundamental principles of the conservation of mass and energy, and their consequences as they relate to materials and energy. New to this edition are numerous worked examples, illustrating conventional and novel problem-solving techniques in applications such as semiconductor processing, environmental engineering, the production and processing of advanced and exotic materials for aerospace, electronic, and structural applications.

Download or read book Thermodynamics written by N.A. Gokcen and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of Thermodynamics is a thoroughly revised, streamlined, and cor rected version of the book of the same title, first published in 1975. It is intended for students, practicing engineers, and specialists in materials sciences, metallur gical engineering, chemical engineering, chemistry, electrochemistry, and related fields. The present edition contains many additional numerical examples and prob lems. Greater emphasis is put on the application of thermodynamics to chemical, materials, and metallurgical problems. The SI system has been used through out the textbook. In addition, a floppy disk for chemical equilibrium calculations is enclosed inside the back cover. It contains the data for the elements, oxides, halides, sulfides, and other inorganic compounds. The subject material presented in chapters III to XIV formed the basis of a thermodynamics course offered by one of the authors (R.G. Reddy) for the last 14 years at the University of Nevada, Reno. The subject matter in this book is based on a minimum number of laws, axioms, and postulates. This procedure avoids unnecessary repetitions, often encountered in books based on historical sequence of development in thermodynamics. For example, the Clapeyron equation, the van't Hoff equation, and the Nernst distribution law all refer to the Gibbs energy changes of relevant processes, and they need not be presented as radically different relationships.

Download or read book An Introduction to Materials Engineering and Science for Chemical and Materials Engineers written by Brian S. Mitchell and published by John Wiley & Sons. This book was released on 2004-01-16 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Materials Engineering and Science for Chemical and Materials Engineers provides a solid background in materials engineering and science for chemical and materials engineering students. This book: Organizes topics on two levels; by engineering subject area and by materials class. Incorporates instructional objectives, active-learning principles, design-oriented problems, and web-based information and visualization to provide a unique educational experience for the student. Provides a foundation for understanding the structure and properties of materials such as ceramics/glass, polymers, composites, bio-materials, as well as metals and alloys. Takes an integrated approach to the subject, rather than a "metals first" approach.

Download or read book The Metrics of Material and Metal Ecology written by M.A. Reuter and published by Elsevier. This book was released on 2005-11-02 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a must for individuals and companies that have an interest in developing sustainable technology and systems in the complex 'Web of Metals' on a first principles, technological and economic basis, with a focus to the minerals, metals and product manufacturing industries. In this inter-, intra- and trans-disciplinary book the material/metal cycle will be central, addressing technology as the basis for achieving sustainability within the system of primary mineral and metal producing, and the consumer product material cycles, linked to nature's cycles. The following major topics (not exclusive) are discussed in a detail, which will satisfy company CEO's and students of environment, engineering, economics, and law alike: (i) industrial ecology, (ii) system engineering concepts, (iii) development of future breakthrough technology as well optimization of present technology, (iv) process fundamentals (e.g. thermodynamics, separation physics, transport processes etc.), (v) product manufacture and design (for recycling), (vi) environmental legislation and (vii) technology as a basis for achieving sustainability within our present society.The book discusses contentious issues such as the limits of recycling determined by physics, chemistry, economics and process technology, therefore providing the reader with a fundamental basis to understand and critically discuss the validity of environmental legislation. Furthermore, the 'Web of Metals' (i.e. the dynamic interconnection of metal and material cycles and product systems) will reveal that, if the application of environmental evaluation techniques such as material flow analysis, life cycle assessment etc. are not carried out on a sufficient theoretical basis, technological and economic understanding, analyses could lead to erroneous and in the end environmentally harmful conclusions.The book is illustrated with many industrial examples embracing car and electronic consumer goods manufacturing and recycling, and the production and recycling of all major metals (e.g. steel, aluminium, copper, zinc, lead, magnesium, PGM's and PM's) and to an extent plastics. A complete section of the book is devoted to the recycling of light metals. Numerous colour figures and photos, plant and reactor data as well as software and computer models (running under Matlab's Simulink® and AMPL® as well as tools based on neural net technology (CSenseTM) are provided to give the reader the opportunity to investigate the various topics addressed in this book at various levels of depth and theoretical sophistication, providing a wealth of information, share-data and industrial know-how.Finally, the book philosophically discusses how to harmonize the resource, life and technological cycles depicted by the figure on the cover to make a contribution to the sustainable use of resources and products.* Material and Metal Ecology and the various modelling aspects to quantify this * System modelling of recycling systems with applications in the automotive and consumergoods sector* Metallurgical metal recycling with applications in aluminium, supplemented with various modelling examples from thermodynamics, exergy, neural nets to CFD

Download or read book The Production and Processing of Inorganic Materials written by James Evans and published by Springer. This book was released on 2016-12-06 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guiding readers from the significance, history, and sources of materials to advanced materials and processes, this textbook looks at the production and primary processing of inorganic materials, such as ceramics, metals, silicon, and some composite materials. The text encourages instructors to teach the production of all types of inorganic materials as one. While recognizing the differences between producing various types of materials, the authors focus on the commonality of thermodynamics, kinetics, transport phenomena, phase equilibria and transformation, process engineering, and surface chemistry to all inorganic materials. The text focuses on fundamentals and how fundamentals can be applied to understand how the major inorganic materials are produced and the initial stages of their processing. Understanding of these fundamentals will equip students for engineering future processes for producing materials or for studying the processing of the many less common materials not examined in this text. The text is intended for use in an undergraduate course at the junior or senior level, but will also serve as a useful introductory and reference work for graduate students and practicing scientists and engineers.

Download or read book Information Sources in Metallic Materials written by M. N. Patten and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-07-24 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of each volume of this series Guides to Information Sources is to reduce the time which needs to be spent on patient searching and to recommend the best starting point and sources most likely to yield the desired information. The criteria for selection provide a way into a subject to those new to the field and assists in identifying major new or possibly unexplored sources to those who already have some acquaintance with it. The series attempts to achieve evaluation through a careful selection of sources and through the comments provided on those sources.

Download or read book High Temperature Oxidation and Sulphidation Processes written by J. D. Embury and published by Elsevier. This book was released on 2016-01-21 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the fundamental description of the thermodynamics and kinetics of high temperature oxidation of sulphidation of metals and intermetallic compounds. It is a comprehensive account of a large amount of new work in the field including modelling, analysis and a range of experimental methods. The text deals with both basic materials, and some current high temperature structural materials.

Download or read book Data Driven Evolutionary Modeling in Materials Technology written by Nirupam Chakraborti and published by CRC Press. This book was released on 2022-09-15 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to efficacy and optimization potential of genetic and evolutionary algorithms, they are used in learning and modeling especially with the advent of big data related problems. This book presents the algorithms and strategies specifically associated with pertinent issues in materials science domain. It discusses the procedures for evolutionary multi-objective optimization of objective functions created through these procedures and introduces available codes. Recent applications ranging from primary metal production to materials design are covered. It also describes hybrid modeling strategy, and other common modeling and simulation strategies like molecular dynamics, cellular automata etc. Features: Focuses on data-driven evolutionary modeling and optimization, including evolutionary deep learning. Include details on both algorithms and their applications in materials science and technology. Discusses hybrid data-driven modeling that couples evolutionary algorithms with generic computing strategies. Thoroughly discusses applications of pertinent strategies in metallurgy and materials. Provides overview of the major single and multi-objective evolutionary algorithms. This book aims at Researchers, Professionals, and Graduate students in Materials Science, Data-Driven Engineering, Metallurgical Engineering, Computational Materials Science, Structural Materials, and Functional Materials.

Download or read book Problems in Metallurgical Thermodynamics and Kinetics written by G. S. Upadhyaya and published by Elsevier. This book was released on 2013-10-22 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Problems in Metallurgical Thermodynamics and Kinetics provides an illustration of the calculations encountered in the study of metallurgical thermodynamics and kinetics, focusing on theoretical concepts and practical applications. The chapters of this book provide comprehensive account of the theories, including basic and applied numerical examples with solutions. Unsolved numerical examples drawn from a wide range of metallurgical processes are also provided at the end of each chapter. The topics discussed include the three laws of thermodynamics; Clausius-Clapeyron equation; fugacity, activity, and equilibrium constant; thermodynamics of electrochemical cells; and kinetics. This book is beneficial to undergraduate and postgraduate students in universities, polytechnics, and technical colleges.

Download or read book High Temperature Corrosion written by César A. C. Sequeira and published by John Wiley & Sons. This book was released on 2019-01-23 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the science and engineering of high-temperature corrosion and provides guidelines for selecting the best materials for an array of system processes High-temperature corrosion (HTC) is a widespread problem in an array of industries, including power generation, aerospace, automotive, and mineral and chemical processing, to name a few. This book provides engineers, physicists, and chemists with a balanced presentation of all relevant basic science and engineering aspects of high-temperature corrosion. It covers most HTC types, including oxidation, sulfidation, nitridation, molten salts, fuel-ash corrosion, H2S/H2 corrosion, molten fluoride/HF corrosion, and carburization. It also provides corrosion data essential for making the appropriate choices of candidate materials for high-temperature service in process conditions. A form of corrosion that does not require the presence of liquids, high-temperature corrosion occurs due to the interaction at high temperatures of gases, liquids, or solids with materials. HTC is a subject is of increasing importance in many areas of science and engineering, and students, researchers, and engineers need to be aware of the nature of the processes that occur in high-temperature materials and equipment in common use today, especially in the chemical, gas, petroleum, electric power, metal manufacturing, automotive, and nuclear industries. Provides engineers and scientists with the essential data needed to make the most informed decisions on materials selection Includes up-to-date information accompanied by more than 1,000 references, 80% of which from within the past fifteen years Includes details on systems of critical engineering importance, especially the corrosion induced by low-energy radionuclides Includes practical guidelines for testing and research in HTC, along with both the European and International Standards for high-temperature corrosion engineering Offering balanced, in-depth coverage of the fundamental science behind and engineering of HTC, High Temperature Corrosion: Fundamentals and Engineering is a valuable resource for academic researchers, students, and professionals in the material sciences, solid state physics, solid state chemistry, electrochemistry, metallurgy, and mechanical, chemical, and structural engineers.

Download or read book Coastal Conservation and Management written by J. Pat Doody and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coastal Conservation and Management provides the reader with a synthesis of the range and variation of the main coastal formations and includes practical guidance on their management. The book discusses all the main coastal habitats of importance for nature conservation (saltmarsh, shingle, sand dune and seacliff) as well as combinations of these habitats (estuaries and other coastal wetlands). It offers a comprehensive picture of both the soft sedimentary formations and those which are more resilient. While these habitats have all been covered elsewhere in the literature, no single volume gives such a wide-ranging account. An attempt is made throughout to provide the reader with a basic understanding of the importance and range of variation of each habitat and coastal ecosystem. The principal issues are discussed and the key management options identified. Some prescriptive suggestions are made, though for the most part, the reader is left to ponder the issues and their possible solutions.

Download or read book Proceedings of the 8th Pacific Rim International Conference on Advanced Materials and Processing PRICM 8 written by FernD.S. Marquis and published by Springer. This book was released on 2017-03-21 with total page 3431 pages. Available in PDF, EPUB and Kindle. Book excerpt: PRICM-8 features the most prominent and largest-scale interactions in advanced materials and processing in the Pacific Rim region. The conference is unique in its intrinsic nature and architecture which crosses many traditional discipline and cultural boundaries. This is a comprehensive collection of papers from the 15 symposia presented at this event.

Download or read book Silicon Compatible Materials Processes and Technologies for Advanced Integrated Circuits and Emerging Applications 6 written by Fred Roozeboom and published by The Electrochemical Society. This book was released on with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 7th International Conference on Advances in Energy Research written by Manaswita Bose and published by Springer Nature. This book was released on 2020-10-17 with total page 1639 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the 7th International Conference on Advances in Energy Research (ICAER 2019), providing a comprehensive coverage encompassing all fields and aspects of energy in terms of generation, storage, and distribution. Themes such as optimization of energy systems, energy efficiency, economics, management, and policy, and the interlinkages between energy and environment are included. The contents of this book will be of use to researchers and policy makers alike.