Download or read book Stoffgesetz zur Beschreibung des Kriech und Relaxationsverhaltens junger normal und hochfester Betone written by Anders, Isabel and published by KIT Scientific Publishing. This book was released on 2014-05-22 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within this work a material law was developed which correctly describes the creep and relaxation characteristics of young and mature normal strength and high-strength concretes. It is based on an aging thermodynamically sound rheological model and considers the complex nonlinear creep behavior under constant and variable stresses. In case of relaxation the corresponding integral relation is solved by means of a numerical algorithm.
Download or read book Experimental characterization and modelling of textile reinforced masonry structures with the Equivalent frame method written by Rizzo, Stefania and published by KIT Scientific Publishing. This book was released on 2022-09-09 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: An innovative strengthening technique for the seismic retrofitting of masonry buildings is the fabric-reinforced cementitious matrix (FRCM). The system presented in this work is EQ-GRID, which consists of a multi-axial hybrid grid made of alkali-resistant glass and polypropylene fibres and a natural hydraulic lime mortar (NHL) as matrix. The results of the performed experimental campaign and the numerical modelling with the Equivalent frame method are presented and discussed in this work.
Download or read book Seismic soil structure interaction of navigation locks written by Maltidis, Georgios and published by KIT Scientific Publishing. This book was released on 2017-12-20 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Influence of elevated temperatures up to 100 C on the mechanical properties of concrete written by Acosta Urrea, Fernando and published by KIT Scientific Publishing. This book was released on 2018-08-03 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Code type models for concrete behaviour written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2013-11-01 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Model Code 2010 represents the state-of-the-art of code-type models for structural behaviour of concrete. It comprises constitutive relations and material models together with the most important explanatory notes. However the underlying normative work, i.e. the fundamental data as well as the considerations and discussions behind the formulas could not be given within the Model Code text. Based on various experiences gained after the publication of Model Code 1990 this lacking background information will lead in the following to numerous questions arising from Model Code users. Consequently the present bulletin claims to conquer this general weakness of codes in a way to guard against any future misunderstandings of the Model Code 2010 related to its chapter 5.1 (Concrete). It discusses the given formulas in connection with experimental data and the most important international literature. The constitutive relations or material models, being included in MC1990 and forming the basis and point of origin of the Task Group’s work, were critically evaluated, if necessary and possible adjusted, or replaced by completely new approaches. Major criteria have been the physical and thermodynamical soundness as well as practical considerations like simplicity and operationality. This state-of-the-art report is intended for practicizing engineers as well as for researchers and represents a comprehensible summary of the relevant knowledge available to the members of the fib Task Group 8.7 at the time of its drafting. Besides the fact that the bulletin is a background document for Chapter 5.1 of MC2010, it will provide an important foundation for the development of future generations of code-type models related to the characteristics and the behaviour of structural concrete. Further it will offer insights into the complexity of the normative work related to concrete modelling, leading to a better understanding and adequate appreciation of MC2010.
Download or read book Nachhaltiges Bauen mit ultra hochfestem Beton written by Michael Schmidt and published by kassel university press GmbH. This book was released on 2014 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Model Code for Service Life Design written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2006-01-01 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 34 addresses Service Life Design (SLD) for plain concrete, reinforced concrete and pre-stressed concrete structures, with a special focus on design provisions for managing the adverse effects of degradation. Its objective is to identify agreed durability related models and to prepare the framework for standardization of performance based design approaches. Four different options for SLD are given: - a full probabilistic approach, - a semi probabilistic approach (partial factor design), - deemed to satisfy rules, - avoidance of deterioration. The service life design approaches described in this document may be applied for the design of new structures, for updating the service life design if the structure exists and real material properties and/or the interaction of environment and structure can be measured (real concrete covers, carbonation depths), and for calculating residual service life. The bulletin is divided into five chapters: 1. General 2. Basis of design 3. Verification of Service Life Design 4. Execution and its quality management 5. Maintenance and condition control It also includes four informative annexes, which give background information and examples of procedures and deterioration models for the application in SLD. The format of Bulletin 34 follows the CEB-FIP tradition for Model Codes: the main provisions are given on the right-hand side of the page, and on the left-hand side, the comments. Note: An Italian translation of Bulletin 34 is also available; contact us for further details.
Download or read book Time Dependent Behaviour of Concrete Structures written by Raymond Ian Gilbert and published by CRC Press. This book was released on 2010-09-15 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serviceability failures of concrete structures involving excessive cracking or deflection are relatively common, even in structures that comply with code requirements. This is often as a result of a failure to adequately account for the time-dependent deformations of concrete in the design of the structure. The serviceability provisions embodied in codes of practice are relatively crude and, in some situations, unreliable and do not adequately model the in-service behaviour of structures. In particular, they fail to adequately account for the effects of creep and shrinkage of the concrete. Design for serviceability is complicated by the non-linear and inelastic behaviour of concrete at service loads. Providing detailed information, this book helps engineers to rationally predict the time-varying deformation of concrete structures under typical in-service conditions. It gives analytical methods to help anticipate time-dependent cracking, the gradual change in tension stiffening with time, creep induced deformations and the load independent strains caused by shrinkage and temperature changes. The calculation procedures are illustrated with many worked examples. A vital guide for practising engineers and advanced students of structural engineering on the design of concrete structures for serviceability and provides a penetrating insight into the time-dependent behaviour of reinforced and prestressed concrete structures.
Download or read book Creep and Hygrothermal Effects in Concrete Structures written by Zdeněk P. Bažant and published by Springer. This book was released on 2018-01-17 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive treatise covers in detail practical methods of analysis as well as advanced mathematical models for structures highly sensitive to creep and shrinkage. Effective computational algorithms for century-long creep effects in structures, moisture diffusion and high temperature effects are presented. The main design codes and recommendations (including RILEM B3 and B4) are critically compared. Statistical uncertainty of century-long predictions is analyzed and its reduction by extrapolation is discussed, with emphasis on updating based on short-time tests and on long-term measurements on existing structures. Testing methods and the statistics of large randomly collected databases are critically appraised and improvements of predictions of multi-decade relaxation of prestressing steel, cyclic creep in bridges, cracking damage, etc., are demonstrated. Important research directions, such as nanomechanical and probabilistic modeling, are identified, and the need for separating the long-lasting autogenous shrinkage of modern concretes from the creep and drying shrinkage data and introducing it into practical prediction models is emphasized. All the results are derived mathematically and justified as much as possible by extensive test data. The theoretical background in linear viscoelasticity with aging is covered in detail. The didactic style makes the book suitable as a textbook. Everything is properly explained, step by step, with a wealth of application examples as well as simple illustrations of the basic phenomena which could alternate as homeworks or exams. The book is of interest to practicing engineers, researchers, educators and graduate students.
Download or read book Fibre Reinforced Concrete Improvements and Innovations written by Pedro Serna and published by Springer Nature. This book was released on 2020-11-05 with total page 1180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of fibre reinforced concrete (FRC) and discusses a diverse range of topics concerning FRC: rheology and early-age properties, mechanical properties, codes and standards, long-term properties, durability, analytical and numerical models, quality control, structural and Industrial applications, smart FRC’s, nanotechnologies related to FRC, textile reinforced concrete, structural design and UHPFRC. The contributions present improved traditional and new ideas that will open novel research directions and foster multidisciplinary collaboration between different specialists. Although the symposium was postponed, the book gathers peer-reviewed papers selected in 2020 for the RILEM-fib International Symposium on Fibre Reinforced Concrete (BEFIB).
Download or read book Creep and Shrinkage of Concrete written by Z. P. Bažant and published by Spon Press. This book was released on 1993-01-01 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the proceedings of the 5th RILEM International Symposium, held in Barcelona in September 1993. The papers discuss creep and shrinkage of concrete, and should be of interest to cement and concrete technologists and researchers, as well as structural engineers.
Download or read book A 10 year Study of Creep Properties of Concrete written by J. A. Hanson and published by . This book was released on 1953 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Life Cycle Civil Engineering Innovation Theory and Practice written by Airong Chen and published by CRC Press. This book was released on 2021-02-26 with total page 1758 pages. Available in PDF, EPUB and Kindle. Book excerpt: Life-Cycle Civil Engineering: Innovation, Theory and Practice contains the lectures and papers presented at IALCCE2020, the Seventh International Symposium on Life-Cycle Civil Engineering, held in Shanghai, China, October 27-30, 2020. It consists of a book of extended abstracts and a multimedia device containing the full papers of 230 contributions, including the Fazlur R. Khan lecture, eight keynote lectures, and 221 technical papers from all over the world. All major aspects of life-cycle engineering are addressed, with special emphasis on life-cycle design, assessment, maintenance and management of structures and infrastructure systems under various deterioration mechanisms due to various environmental hazards. It is expected that the proceedings of IALCCE2020 will serve as a valuable reference to anyone interested in life-cycle of civil infrastructure systems, including students, researchers, engineers and practitioners from all areas of engineering and industry.
Download or read book Proceedings of the 1st Conference of the European Association on Quality Control of Bridges and Structures written by Carlo Pellegrino and published by Springer Nature. This book was released on 2021-12-11 with total page 1454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances and innovations in the field of quality control and improvement of bridges and structures, as presented by international researchers and engineers at the 1st Conference of the European Association on Quality Control of Bridges and Structures (EUROSTRUCT 2021), held in Padua, Italy on August 29 – September 1, 2021. Contributions include a wide range of topics such as testing and advanced diagnostic techniques for damage detection; SHM and AI, IoT and machine learning for data analysis of bridges and structures; fiberoptics and smart sensors for long-term SHM; structural reliability, risk, robustness, redundancy and resilience for bridges; corrosion models, fatigue analysis and impact of hazards on infrastructure components; bridge and asset management systems, and decision-making models; Life-Cycle Analysis, retrofit and service-life extension, risk management protocols; quality control plans, sustainability and green materials.
Download or read book Understanding the Rheology of Concrete written by N Roussel and published by Elsevier. This book was released on 2011-12-20 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Estimating, modelling, controlling and monitoring the flow of concrete is a vital part of the construction process, as the properties of concrete before it has set can have a significant impact on performance. This book provides a detailed overview of the rheological behaviour of concrete, including measurement techniques, the impact of mix design, and casting. Part one begins with two introductory chapters dealing with the rheology and rheometry of complex fluids, followed by chapters that examine specific measurement and testing techniques for concrete. The focus of part two is the impact of mix design on the rheological behaviour of concrete, looking at additives including superplasticizers and viscosity agents. Finally, chapters in part three cover topics related to casting, such as thixotropy and formwork pressure. With its distinguished editor and expert team of contributors, Understanding the rheology of concrete is an essential reference for researchers, materials specifiers, architects and designers in any section of the construction industry that makes use of concrete, and will also benefit graduate and undergraduate students of civil engineering, materials and construction. Provides a detailed overview of the rheological behaviour of concrete, including measurement techniques, casting and the impact of mix design The estimating, modelling, controlling and monitoring of concrete flow is comprehensively discussed Chapters examine specific measurement and testing techniques for concrete, the impact of mix design on the rheological behaviour of concrete, particle packaging and viscosity-enhancing admixtures
Download or read book Autowave Plasticity written by Lev Zuev and published by CRC Press. This book was released on 2020-04-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autowave Plasticity: Localization and Collective Modes discusses the nature of plastic flow in solids associated with the development of a localized plastic flow. Written by an authority in the field, the author demonstrates how patterns of localized plastic flow are associated with autowave modes that are generated in a deformable sample and delivers a complete work on the subject. Key Features An original work on the nature of plastic flows in solids, particularly metals and crystals Focuses on plastic flow as an autowave process Contains elements of theories, experimental considerations, and numerical modeling This reference will help readers with creating experimental methods to observe or localize plastic flow and with the modeling of plastic flows. It is a valuable reference for graduate students and research specialists working in material science.
Download or read book Creep and Shrinkage in Concrete Structures written by Z. P. Bažant and published by John Wiley & Sons. This book was released on 1982 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: