Download or read book Stimuli Responsive Polymeric Membranes written by Mihir Kumar Purkait and published by Academic Press. This book was released on 2018-09-11 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stimuli Responsive Polymeric Membranes: Smart Polymeric Membranes explains the fundamentals and advances in topics relating to the field of membrane science. It elaborately explains concepts relating to stimuli responsive membranes, with special importance given down to minute details. Material selection, preparation, characterization and applications of various stimuli responsive membranes are extensively addressed, and their relevance (including examples) is included. The book covers history and development, merits and demerits, mechanisms of transport and fouling, applicability of membranes to various diverse areas, and preparation and characterization techniques of membranes. Next, the concept of fouling and its remedial actions is discussed. Finally, promising fields of research in the membrane science and future perspectives of membrane science field are explored. Provides basic and advanced knowledge of smart membranes, considering their morphological, physicochemical and separation characteristics Written in a clear and lucid style, keeping a diverse audience in mind Based on the state-of-art research of the authors

Download or read book pH Responsive Membranes written by Randeep Singh and published by CRC Press. This book was released on 2022-01-25 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an application-oriented approach for pH responsive membranes and types of stimuli-responsive membranes and their applications in the biomedical field including initial development and recent use. It explains types, modes, and modification methods of membranes, along with membrane usage in applications such as drug delivery, hemodialysis, chemical sensing, and so forth. pH Responsive Membranes: Biomedical Applications explores recent research carried out in the area as well as the future outlook, and provides deeper insight for readers on the subject, ranging from the basics to advanced levels on the topic. Features Describes preparation, characterization, and applications of pH responsive membranes in biomedical applications Introduces theoretical understanding of pH responsiveness Covers development of advanced techniques regarding pH responsive membranes Provides insight into development of new materials and membranes Discusses advancements in drug delivery, hemodialysis, antibodies and enzyme production, chemical sensing, and selective ionic transport using pH responsive membranes This book is aimed at graduate students and researchers involved in membrane and chemical engineering/polymer exploration, and medical researchers.

Download or read book Stimuli Responsive Polymeric Composite Membranes for Controlled Delivery of Proteins and Peptides microform written by Kai Zhang and published by National Library of Canada = Bibliothèque nationale du Canada. This book was released on 2003 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Smart Polymer Nanocomposites written by Showkat Ahmad Bhawani and published by Woodhead Publishing. This book was released on 2020-11-28 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Polymer Nanocomposites: Biomedical and Environmental Applications presents the latest information on smart polymers and their promising application in various fields, including their role in delivery systems for drugs, tissue engineering scaffolds, cell culture sports, bioseparation, and sensors or actuator systems. Features detailed information on the preparation, characterization and applications of smart functional polymer composites Covers a broad range of applications in both the biomedical and environmental engineering fields Chapters are written by authors with diverse background expertise from the faculties of chemistry, engineering and the manufacturing industry

Download or read book PH Responsive Membranes written by Randeep Singh and published by CRC Press. This book was released on 2022 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an application-oriented approach for pH responsive membranes and types of stimuli-responsive membranes and their applications in the biomedical field including initial development and recent use. It explains types, modes, and modification methods of membranes, along with membrane usage in applications such as drug delivery, hemodialysis, chemical sensing, and so forth. pH Responsive Membranes: Biomedical Applications explores recent research carried out in the area as well as the future outlook, and provides deeper insight for readers on the subject, ranging from the basics to advanced levels on the topic. Features Describes preparation, characterization, and applications of pH responsive membranes in biomedical applications Introduces theoretical understanding of pH responsiveness Covers development of advanced techniques regarding pH responsive membranes Provides insight into development of new materials and membranes Discusses advancements in drug delivery, hemodialysis, antibodies and enzyme production, chemical sensing, and selective ionic transport using pH responsive membranes This book is aimed at graduate students and researchers involved in membrane and chemical engineering/polymer exploration, and medical researchers.

Download or read book Biomedical Applications of Polymeric Materials and Composites written by Raju Francis and published by John Wiley & Sons. This book was released on 2016-12-19 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its content taken from only the very latest results, this is an extensive summary of the various polymeric materials used for biomedical applications. Following an introduction listing various functional polymers, including conductive, biocompatible and conjugated polymers, the book goes on to discuss different synthetic polymers that can be used, for example, as hydrogels, biochemical sensors, functional surfaces, and natural degradable materials. Throughout, the focus is on applications, with worked examples for training purposes as well as case studies included. The whole is rounded off with a look at future trends.

Download or read book Stimuli responsive Polymer modified Nanoporous Colloidal Films and Membranes written by Olga Alexandrovna Shchepelina and published by . This book was released on 2009 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Actuators and Their Applications written by Inamuddin and published by John Wiley & Sons. This book was released on 2020-04-17 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: As demand has increased for new types of equipment that are more suited to the ever-evolving world of industry, demand for both new and traditional types of actuators has soared. From automotive and aeronautical to biomedical and robotics, engineers are constantly developing actuating devices that are adapted to their particular needs in their particular field, and actuators are used in almost every field of engineering that there is. This volume not only lays out the fundamentals of actuators, such as how they operate, the different kinds, and their various applications, but it also informs the engineer or student about the new actuators that are being developed and the state-of-the-art of actuators. Edited and written by highly experienced and well-respected engineers with a deep understanding of their subject, there is no other volume on actuators that is more current or comprehensive. Whether as a guide for the latest innovations in actuators, a refresher reference work for the veteran engineer, or an introductory text for the engineering student, this is a must-have for any engineer’s or university’s library. Covering the theory and the practical applications, this breakthrough volume is a “one stop shop” for any engineer or student interested in actuators.

Download or read book Responsive Membranes and Materials written by D. Bhattacharyya and published by John Wiley & Sons. This book was released on 2012-11-26 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of new multifunctional membranes and materials which respond to external stimuli, such as pH, temperature, light, biochemicals or magnetic or electrical signals, represents new approaches to separations, reactions, or recognitions. With multiple cooperative functions, responsive membranes and materials have applications which range from biopharmaceutical, to drug delivery systems to water treatment. This book covers recent advances in the generation and application of responsive materials and includes: Development and design of responsive membranes and materials Carbon nanotube membranes Tunable separations, reactions and nanoparticle synthesis Responsive membranes for water treatment Pore-filled membranes for drug release Biologically-inspired responsive materials and hydrogels Biomimetic polymer gels Responsive Membranes and Materials provides a cutting-edge resource for researchers and scientists in membrane science and technology, as well as specialists in separations, biomaterials, bionanotechnology, drug delivery, polymers, and functional materials.

Download or read book Grafting of Stimuli responsive Polymer Films to Ultrafiltration Membranes written by Colleen Michelle Gorey and published by . This book was released on 2008 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project focused on modifying membrane surfaces to increase fouling control while improving permeability and selectivity, resulting in membranes with longer operational lives, lower cleaning frequencies, and higher efficiencies. The modifications involved the attachment of a temperature sensitive polymer to keep the membrane from fouling. The membrane modifications, which produced a self-cleaning cellulose acetate membrane, involved grafting the surface with a thermally responsive film layer of hydroxypropyl cellulose (HPC). HPC possesses a lower critical solution temperature (LCST) of approximately 43C. When attached to a surface, HPC forms a film, which collapses at temperatures above the LCST and expands when cooled to below the LCST. By keeping the film in a non-equilibrium state, via oscillating the temperature of the membrane surface, (as was observed by flux decline), fouling was reduced. Two surface modification techniques were tested and compared to the unmodified membrane - Method 1 and Method 2. Method 1 involved the attachment of a gel layer whereas Method 2 was the attachment of polymer structures on the surface of the membrane. Roughness measurements, using a wet atomic force microscopy (AFM) cell, and filtration experiments (to monitor flux declines) were performed at cold temperatures (25C), at hot temperatures (60C) and with temperature oscillations. The unmodified membrane had roughness values that were higher when hot and lower when cold, and it displayed flux declines under all temperature conditions when a humic solution was filtered. Since the humic solution was acting as a fouling agent, the decrease in flux indicated the membrane was fouling. When Method 1 was used, both roughness values and filtration experiments supported temperature activation. Wet Method 1 membranes at cold temperatures displayed an average roughness of 8.40 nm while at hot temperatures, the roughness decreased to 0.92 nm, supporting the hypothesis of the film being expanded at cold temperatures and collapsed at hot temperatures. Filtration experiments using the Method 1 membrane showed that flux measurements remained nearly constant at all temperature test conditions; however, initial flux values were significantly lower than the unmodified membrane due to the potential film formation within pores. On the other hand, the Method 2 showed higher initial flux values (not significantly different from the unmodified membrane) since the film was formed in solution then attached to the membrane, which was believed to be farther away from the membrane surface. Membrane roughness values for Method 2 were on average 6.80 nm and 5.02 nm for cold and hot temperatures. As with Method 1, Method 2 membranes displayed nearly no flux decline irrespective of temperature condition when a humic solution was filtered through. Even though temperature responses were more pronounced when Method 1 membranes were used as compared to the Method 2 membranes, the loss in initial fluxes due to pore blockage with Method 1 made Method 2 more advantageous. A Method 2 modified membrane would produce a self-cleaning membrane. The use of harsh chemicals during normal membrane cleaning would be avoided with the Method 2 modified membrane as a constant flux operation could be achieved using temperature oscillations only.

Download or read book Stimuli Responsive Polymeric Nanocarriers for Drug Delivery Applications written by Abdel Salam Hamdy Makhlouf and published by Woodhead Publishing. This book was released on 2018-10-24 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stimuli Responsive Polymeric Nanocarriers for Drug Delivery Applications: Volume Two: Advanced Nanocarriers for Therapeutics discusses, in detail, the recent trends in designing dual and multi-responsive polymers and nanoparticles for safe drug delivery. Chapters cover dual-responsive polymeric nanocarriers for drug delivery and their different stimuli, multi-responsive polymeric nanocarriers, and the therapeutic applications of stimuli-responsive polymers. With an emphasis on advanced medical applications and synergistic operational and technological methodologies for the improvement of polymers systems for the production of stimuli-responsive polymers, this book is essential reading for materials scientists and researchers working in the drug delivery and pharmaceutical industries. As innovation and development in the area of stimuli responsive polymer-based nanomaterials for drug delivery is moving fast and there is an increased global demand for biodegradable and biocompatible responsive polymers and nanoparticles for safe drug delivery, users will find this to be a timely resource. Focusses on the most advanced technologies, recent evaluation methods, technical aspects, and advanced synthesis techniques stimuli-responsive polymers Examines advanced medical applications of stimuli responsive polymers Analyzes synergistic operational and technological methodologies for the improvement of polymer systems for the production of stimuli-responsive polymers in drug delivery

Download or read book Nanopharmaceutical Advanced Delivery Systems written by Vivek Dave and published by John Wiley & Sons. This book was released on 2020-12-29 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a single volume covering detailed descriptions about various delivery systems, their principles and how these are put in use for the treatment of multiple diseases. It is divided into four sections where the first section deals with the introduction and importance of novel drug delivery system. The second section deals with the most advanced drug delivery systems like microbubbles, dendrimers, lipid-based nanoparticles, nanofibers, microemulsions etc., describing the major principles and techniques of the preparations of the drug delivery systems. The third section elaborates on the treatments of diverse diseases like cancer, topical diseases, tuberculosis etc. The fourth and final section provides a brief informative description about the regulatory aspects of novel drug delivery system that is followed in various countries.

Download or read book Smart Membranes written by Liang-Yin Chu and published by Royal Society of Chemistry. This book was released on 2019-04-03 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart membranes that respond to environmental stimuli are gaining attention because of their potential use in a variety of applications, from drug delivery to water treatment. Their surface characteristics and/or permeation properties, including pressure-driven hydraulic permeability and concentration-driven diffusional permeability, can be adjusted in response to small chemical and/or physical stimuli in the environment. This book will cover topics such as novel design and fabrication strategies, approaches for controlling structure and performance, as well as cutting-edge applications of smart membranes. It will deliver new insights and fundamentals for both professionals and newcomers in related fields. Edited by an internationally renowned expert and with contributions from key researchers, Smart Membranes provides a comprehensive overview of the topic. It will appeal to students and researchers across materials science, chemistry, chemical engineering, pharmaceutical science and biomedical science.

Download or read book Advancement in Polymer Based Membranes for Water Remediation written by Sanjay K. Nayak and published by Elsevier. This book was released on 2022-02-23 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advancements in Polymer-Based Membranes for Water Remediation describes the advanced membrane science and engineering behind the separation processes within the domain of polymer-based membrane systems in water remediation. Emphasis has been put on several aspects, ranging from fundamental concepts to the commercialization of pressure and potential driven membranes, updated with the latest technological progresses, and relevant polymer materials and application potential towards water treatment systems. Also included in this book are advances in polymers for membrane application in reverse osmosis, nanofiltration, ultrafiltration, microfiltration, forward osmosis, and polymeric ion-exchange membranes for electrodialysis and capacitive deionization. With its critical analyzes and opinions from experts around the world, this book will garner considerable interest among actual users, i.e., scientists, engineers, industrialists, entrepreneurs and students. Evaluates water remediation using pressure driven and potential driven membrane processes Reviews emerging polymer systems for membranes preparation Offers a comprehensive analysis in the development of polymer-based membranes and their applications in water remediation Analyzes membrane performance parameters to evaluate separation efficiency for various water pollutants Covers concept-to-commercialization aspects of polymer-based membranes in terms of water purification, pollutant removal, stability and scalability

Download or read book Smart Stimuli Responsive Polymers Films and Gels written by Liang Hu and published by John Wiley & Sons. This book was released on 2022-08-02 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Stimuli-Responsive Poymers, Films, and Gels Discover the most important developments in synthesis, simulation, and applications of a fascinating compound class There exist a range of natural materials that respond to environmental changes by altering their physical or chemical properties, known as stimuli-responsive polymers, these substances are responsive to light, temperature, pressure, and more. The study of these so-called “smart” polymers is essential to a range of application fields, many of which have generated cutting-edge research in recent decades. A comprehensive introduction to the subject is therefore well-timed Smart Stimuli-Responsive Polymers, Films, and Gels provides an introduction to these polymers and their applications. It includes producing these polymers through synthetic approaches, simulating their responses to different stimuli, and applying these materials in different industries and research capacities. Written to serve the requirements of advanced students and senior researchers alike, this timely work will drive years of research in this vital field. In Smart Stimuli-Responsive Polymers, Films, and Gels readers will also find: Treatment of mechanoresponsive, photoresponsive, and ionizing-radiation responsive polymers Applications in emerging fields such as sensors, biomedicine, catalysis, and more Interdisciplinary research into the properties and responses of these vital compounds Smart Stimuli-Responsive Polymers, Films, and Gels promises to become a seminal work for chemists, materials scientists, and industrial researchers seeking to incorporate these materials into a variety of industrial and research areas.

Download or read book Membranes for Water Treatment written by Klaus-Viktor Peinemann and published by John Wiley & Sons. This book was released on 2010-11-29 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This ready reference on Membrane Technologies for Water Treatment, is an invaluable source detailing sustainable, emerging processes, to provide clean, energy saving and cost effective alternatives to conventional processes. The editors are internationally renowned leaders in the field, who have put together a first-class team of authors from academia and industry to present a highly approach to the subject. The book is an instrumental tool for Process Engineers, Chemical Engineers, Process Control Technicians, Water Chemists, Environmental Chemists, Materials Scientists and Patent Lawyers.

Download or read book Advanced Nanomaterials for Membrane Synthesis and Its Applications written by Woei Jye Lau and published by Elsevier. This book was released on 2018-11-21 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Nanomaterials for Membrane Synthesis and Its Applications provides the academic and industrial communities the most up-to-date information on the latest trends in membrane nanomaterials and membrane nanotechnology used in wastewater treatment, environmental technology and energy. The rapid advances in nanomaterials and nanotechnology development over the past decade have resulted in significant growth of the membrane business for various industrial processes, particularly in nanotechnology-based membrane processes. While membrane technology is increasingly being used for liquid and gas separations, it has great potential in a variety of additional applications. As the worldwide academic community has a strong interest in advanced membrane processes, particularly membrane nanotechnology for specific separations, this book provides a timely update on the topic. Presents a unique focus on the use of advanced nanomaterials in membrane fabrication/modification, and in the description of membrane nanotechnologies, such as nanofiltration, thin film nanocomposites and nanofibers for various applications Describes next generation membranes, providing first resource details on the development and commercialization stages of these new membranes Represents the state-of-the-art on the use of nanomaterials in membrane science