Download or read book Radiation Sterilization for Health Care Products written by Barry P. Fairand and published by CRC Press. This book was released on 2001-09-26 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on how the radiation process works and how it is applied in sterilizing medical devices and healthcare products, this book provides the latest developments in radiation technology in the form of e-beams, gamma rays, and x-rays. It covers the design and operation of irradiators as well as factors that affect cost and efficiency. It offers readers practical insights on this critical step in healthcare product manufacturing, its current uses, and its related cost concerns. Bringing all the information into one source, Radiation Sterilization for Health Care Products is a uniquely comprehensive resource.
Download or read book Practical Healthcare Epidemiology written by Ebbing Lautenbach and published by Cambridge University Press. This book was released on 2018-04-19 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: A clear, hands-on outline of best practices for infection prevention that directly improve patient outcomes across the healthcare continuum.
Download or read book Sterilisation of Biomaterials and Medical Devices written by Sophie Lerouge and published by Elsevier. This book was released on 2012-09-27 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effective sterilisation of any material or device to be implanted in or used in close contact with the human body is essential for the elimination of harmful agents such as bacteria. Sterilisation of biomaterials and medical devices reviews established and commonly used technologies alongside new and emerging processes.Following an introduction to the key concepts and challenges involved in sterilisation, the sterilisation of biomaterials and medical devices using steam and dry heat, ionising radiation and ethylene oxide is reviewed. A range of non-traditional sterilisation techniques, such as hydrogen peroxide gas plasma, ozone and steam formaldehyde, is then discussed together with research in sterilisation and decontamination of surfaces by plasma discharges. Sterilisation techniques for polymers, drug-device products and tissue allografts are then reviewed, together with antimicrobial coatings for 'self-sterilisation' and the challenge presented by prions and endotoxins in the sterilisation of reusable medical devices. The book concludes with a discussion of future trends in the sterilisation of biomaterials and medical devices.With its distinguished editors and expert team of international contributors, Sterilisation of biomaterials and medical devices is an essential reference for all materials scientists, engineers and researchers within the medical devices industry. It also provides a thorough overview for academics and clinicians working in this area. - Reviews established and commonly used technologies alongside new and emerging processes - Introduces and reviews the key concepts and challenges involved in sterilisation - Discusses future trends in the sterilisation of biomaterials and medical devices
Download or read book Assurance of Sterility for Sensitive Combination Products and Materials written by Byron J. Lambert and published by Academic Press. This book was released on 2019-11-30 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assurance of Sterility for Sensitive Combination Products and Materials: New Paradigms for the Next Generation of Medical Devices and Pharmaceuticals discusses the medical device industry and existing challenges regarding the exciting new world of sensitive combination products (SCPs) and their terminal sterilization. This book reassesses the current assumptions to assure the patient's best interests are met in the development of increasingly rigorous sterilization methods used to counteract MRSA and other 'super-bugs'. In addition, the book discusses the special challenges faced with implantable medical devices, sterilization requirements and further methods needed for material selection and the design process. This book is unique in taking a holistic, end-to-end approach to sterilization, with a particular focus on materials selection and product design.
Download or read book Sterilization of Medical Supplies by Steam written by Jan Huys and published by . This book was released on 2010 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sterility Sterilisation and Sterility Assurance for Pharmaceuticals written by Tim Sandle and published by Elsevier. This book was released on 2013-10-31 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure to adequately control any microbial challenge associated within process or product by robust sterilisation will result in a contaminated marketed product, with potential harm to the patient. Sterilisation is therefore of great importance to healthcare and the manufacturers of medical devices and pharmaceuticals. Sterility, sterilisation and sterility assurance for pharmaceuticals examines different means of rendering a product sterile by providing an overview of sterilisation methods including heat, radiation and filtration. The book outlines and discusses sterilisation technology and the biopharmaceutical manufacturing process, including aseptic filling, as well as aspects of the design of containers and packaging, as well as addressing the cleanroom environments in which products are prepared. Consisting of 18 chapters, the book comprehensively covers sterility, sterilisation and microorganisms; pyrogenicity and bacterial endotoxins; regulatory requirements and good manufacturing practices; and gamma radiation. Later chapters discuss e-beam; dry heat sterilisation; steam sterilisation; sterilisation by gas; vapour sterilisation; and sterile filtration, before final chapters analyse depyrogenation; cleanrooms; aseptic processing; media simulation; biological indicators; sterility testing; auditing; and new sterilisation techniques. - Covers the main sterilisation methods of physical removal, physical alteration and inactivation - Includes discussion of medical devices, aseptically filled products and terminally sterilised products - Describes bacterial, pyrogenic, and endotoxin risks to devices and products
Download or read book Sterilization Technology for the Health Care Facility written by Marimargaret Reichert and published by Jones & Bartlett Learning. This book was released on 1997 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Second Edition is a comprehensive resource on sterilization and disinfection of reusable instruments and medical devices
Download or read book ANSI AAMI St79 Comprehensive Guide to Steam Sterilization and Sterility Assurance in Health Care Facilities written by Aami and published by Association for the Advancement of Medical Instrumentation (AAMI). This book was released on 2013-10-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The AAMI recommended practice, Comprehensive guide to steam sterilization and sterility assurance in health care facilities, is a breakthrough standard in terms of its scope. AAMI has updated ST79 with the release of ST79:2010/A4:2013. Of particular importance, A4:2013 provides four new figures demonstrating the wrapping of items for steam sterilization and adds an annex focused on Moisture assessment. As of Oct. 25, 2013, purchasers of ST79 will receive ANSI/AAMI ST79:2010 and A1:2010 and A2:2011 and A3:2012 and A4:2014 as a single consolidated document. Among other changes from the 2006 edition of ST79, this revised and expanded second edition of ST79 includes guidance on the use and application of Class 6 emulating indicators, a chemical monitoring device fairly new to the United States. Because ST79 essentially consolidates five AAMI steam sterilization standards (whose content was reviewed and updated to reflect current good practice prior to being incorporated into ST79), it truly is a comprehensive guideline for all steam sterilization activities in healthcare facilities, regardless of the size of the sterilizer or the size of the facility, and provides a resource for all healthcare personnel who use steam for sterilization.
Download or read book Safe Management of Wastes from Health care Activities written by Yves Chartier and published by World Health Organization. This book was released on 2014 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second edition of the WHO handbook on the safe, sustainable and affordable management of health-care waste--commonly known as "the Blue Book". The original Blue Book was a comprehensive publication used widely in health-care centers and government agencies to assist in the adoption of national guidance. It also provided support to committed medical directors and managers to make improvements and presented practical information on waste-management techniques for medical staff and waste workers. It has been more than ten years since the first edition of the Blue Book. During the intervening period, the requirements on generators of health-care wastes have evolved and new methods have become available. Consequently, WHO recognized that it was an appropriate time to update the original text. The purpose of the second edition is to expand and update the practical information in the original Blue Book. The new Blue Book is designed to continue to be a source of impartial health-care information and guidance on safe waste-management practices. The editors' intention has been to keep the best of the original publication and supplement it with the latest relevant information. The audience for the Blue Book has expanded. Initially, the publication was intended for those directly involved in the creation and handling of health-care wastes: medical staff, health-care facility directors, ancillary health workers, infection-control officers and waste workers. This is no longer the situation. A wider range of people and organizations now have an active interest in the safe management of health-care wastes: regulators, policy-makers, development organizations, voluntary groups, environmental bodies, environmental health practitioners, advisers, researchers and students. They should also find the new Blue Book of benefit to their activities. Chapters 2 and 3 explain the various types of waste produced from health-care facilities, their typical characteristics and the hazards these wastes pose to patients, staff and the general environment. Chapters 4 and 5 introduce the guiding regulatory principles for developing local or national approaches to tackling health-care waste management and transposing these into practical plans for regions and individual health-care facilities. Specific methods and technologies are described for waste minimization, segregation and treatment of health-care wastes in Chapters 6, 7 and 8. These chapters introduce the basic features of each technology and the operational and environmental characteristics required to be achieved, followed by information on the potential advantages and disadvantages of each system. To reflect concerns about the difficulties of handling health-care wastewaters, Chapter 9 is an expanded chapter with new guidance on the various sources of wastewater and wastewater treatment options for places not connected to central sewerage systems. Further chapters address issues on economics (Chapter 10), occupational safety (Chapter 11), hygiene and infection control (Chapter 12), and staff training and public awareness (Chapter 13). A wider range of information has been incorporated into this edition of the Blue Book, with the addition of two new chapters on health-care waste management in emergencies (Chapter 14) and an overview of the emerging issues of pandemics, drug-resistant pathogens, climate change and technology advances in medical techniques that will have to be accommodated by health-care waste systems in the future (Chapter 15).
Download or read book Block s Disinfection Sterilization and Preservation written by Gerald McDonnell and published by Lippincott Williams & Wilkins. This book was released on 2020-06-26 with total page 2941 pages. Available in PDF, EPUB and Kindle. Book excerpt: With more international contributors than ever before, Block’s Disinfection, Sterilization, and Preservation, 6th Edition, is the first new edition in nearly 20 years of the definitive technical manual for anyone involved in physical and chemical disinfection and sterilization methods. The book focuses on disease prevention—rather than eradication—and has been thoroughly updated with new information based on recent advances in the field and understanding of the risks, the technologies available, and the regulatory environments.
Download or read book WHO Guidelines on Hand Hygiene in Health Care written by World Health Organization and published by World Health Organization. This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The WHO Guidelines on Hand Hygiene in Health Care provide health-care workers (HCWs), hospital administrators and health authorities with a thorough review of evidence on hand hygiene in health care and specific recommendations to improve practices and reduce transmission of pathogenic microorganisms to patients and HCWs. The present Guidelines are intended to be implemented in any situation in which health care is delivered either to a patient or to a specific group in a population. Therefore, this concept applies to all settings where health care is permanently or occasionally performed, such as home care by birth attendants. Definitions of health-care settings are proposed in Appendix 1. These Guidelines and the associated WHO Multimodal Hand Hygiene Improvement Strategy and an Implementation Toolkit (http://www.who.int/gpsc/en/) are designed to offer health-care facilities in Member States a conceptual framework and practical tools for the application of recommendations in practice at the bedside. While ensuring consistency with the Guidelines recommendations, individual adaptation according to local regulations, settings, needs, and resources is desirable. This extensive review includes in one document sufficient technical information to support training materials and help plan implementation strategies. The document comprises six parts.
Download or read book Global Gidelines for the Pevention of Surgical Site Infection written by World Health Organization and published by . This book was released on 2017-01-27 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surgical site infections are caused by bacteria that get in through incisions made during surgery. They threaten the lives of millions of patients each year and contribute to the spread of antibiotic resistance. In low- and middle-income countries, 11% of patients who undergo surgery are infected in the process. In Africa, up to 20% of women who have a caesarean section contract a wound infection, compromising their own health and their ability to care for their babies. But surgical site infections are not just a problem for poor countries. In the United States, they contribute to patients spending more than 400 000 extra days in hospital at a cost of an additional US $10 billion per year. No international evidence-based guidelines had previously been available before WHO launched its global guidelines on the prevention of surgical site infection on 3 November 2016, and there are inconsistencies in the interpretation of evidence and recommendations in existing national guidelines. These new WHO guidelines are valid for any country and suitable to local adaptations, and take account of the strength of available scientific evidence, the cost and resource implications, and patient values and preferences.
Download or read book Antisepsis Disinfection and Sterilization written by Gerald E. McDonnell and published by John Wiley & Sons. This book was released on 2020-07-10 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Antisepsis, Disinfection, and Sterilization: Types, Action, and Resistance, by Gerald E. McDonnell, is a detailed and accessible presentation of the current methods of microbial control. Each major category, such as physical disinfection methods, is given a chapter, in which theory, spectrum of activity, advantages, disadvantages, and modes of action of the methods are thoroughly and clearly presented. Sufficient background on the life cycles and general anatomy of microorganisms is provided so that the reader who is new to microbiology will better appreciate how physical and chemical biocides work their magic on microbes. Other topics in the book include: Evaluating the efficacy of chemical antiseptics and disinfectants, and of physical methods of microbial control and sterilization. Understanding how to choose the proper biocidal product and process for specific applications. Classic physical and chemical disinfection methods, such as heat, cold, non-ionizing radiation, acids, oxidizing agents, and metals. Newer chemical disinfectants, including, isothiazolones, micro-and nano-particles, and bacteriophages as control agents. Antisepsis of skin and wounds and the biocides that can be used as antiseptics. Classic methods of physical sterilization, such as, moist heat and dry heat sterilization, ionizing radiation, and filtration, along with newer methods, including, the use of plasma or pulsed light. Chemical sterilization methods that use ethylene oxide, formaldehyde, or a variety of other oxidizing agents. A detailed look at the modes of action of biocides in controlling microbial growth and disrupting microbial physiology. Mechanisms that microorganisms use to resist the effects of biocides. The second edition of Antisepsis, Disinfection, and Sterilization: Types, Action, and Resistance is well suited as a textbook and is outstanding as a reference book for facilities managers and application engineers in manufacturing plants, hospitals, and food production facilities. It is also essential for public health officials, healthcare professionals, and infection control practitioners.
Download or read book Medical and Dental Expenses written by and published by . This book was released on 1990 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sterilization Manual for Health Centers written by Silvia I. Acosta-Gnass and published by Pan Amer Health Org. This book was released on 2010 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated sterilisation manual informs health workers about the simple protocols and procedures that have been developed to prevent hospital-acquired infections both inside and outside the sterilisation plant. The guidelines included in this manual show the steps to follow in cleaning, preparing, sterilizing, storing and transporting hospital equipment so as to obtain sterile material. It is very important to be aware of this information in order to provide patients with safe health care.
Download or read book Prevention and Control of Infections in Hospitals written by Bjørg Marit Andersen and published by Springer. This book was released on 2019-02-25 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume offers extensive information on preventive and infection surveillance procedures, routines and policies adapted to the optimal infection control level needed to tackle today’s microbes in hospital practice. It especially focuses on preventive measures for serious hospital infections. Each chapter includes a practical section that addresses the main aspects of procedures and treatment, and a theoretical section that contains updated documentation that can be used for further study, or to help select infection control measures. Infection control concerns all healthcare professional working directly or indirectly with patients; in diagnosis, treatment, isolation measures, operations, equipment, drugs, cleaning, textiles, transport, porter service, food and water, building and maintenance, etc. Hygiene and environmental control is central to infection prevention for patients, visitors and staff alike. Good hygienic practices, individual infection control, well implemented and frequent environmental cleaning, and a high professional standard of hygiene in the treatment and care of patients, are essential to patient safety and a safe working environment. Addressing this essential topic, this book is intended for doctors, nurses and other healthcare workers, students in health-related subjects, hospital managers and health bureaucrats, as well as patients and their families.
Download or read book Principles and Methods of Sterilization in Health Sciences written by J. J. Perkins and published by Charles C. Thomas Publisher. This book was released on 1982 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: By John J. Perkins. This well-known publication has been thoroughly revised and brought up to date in the Second Edition. Chapters have undergone extensive revision and new knowledge relating to automation, mechanical equipment, methods, techniques and procedures have been added. Presented are instructions for operating sterilizers, proper methods of packaging supplies, types of terminal sterilization for decontamination of articles, use of culture tests and sterilizer controls, and problems of standardization of sterilizing techniques. Throughout, emphasis has been placed upon effective methods for decontamination and terminal treatment of medical and surgical supplies.