Download or read book Stereolithography written by Paulo Jorge Bártolo and published by Springer Science & Business Media. This book was released on 2011-03-18 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stereolithography: Materials, Processes and Applications will focus on recent advances in stereolithography covering aspects related to the most recent advances in the field, in terms of fabrication processes (two-photon polymerization, micro-stereolithography, infrared stereolithography and stereo-thermal-lithography), materials (novel resins, hydrogels for medical applications and highly reinforced resins with ceramics and metals), computer simulation and applications.
Download or read book Rapid Prototyping Manufacturing written by Paul Francis Jacobs and published by Society of Manufacturing Engineers. This book was released on 1992 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This turnkey technology source provides an introduction to rapid prototyping and manufacturing (RP&M) with emphasis on Stereolithography which represents the majority of all rapid prototyping systems currently in place. The content is based on theory, analysis and experiment with extensive test data, including select case studies from the automotive, simultaneous engineering, and medical sectors.
Download or read book Stereolithography and Other RP M Technologies written by Paul Francis Jacobs and published by American Society of Mechanical Engineers. This book was released on 1996 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by personnel from North American suppliers of commercially available RPandM systems, the volume updates the state of the technology, and emphasizes the user advantages in terms of cost, market speed, and quality. Topics include: advances in stereolithography photopolymer systems; stereolithography hardware and software technology; parts accuracy; QuickCast development, foundry experience and application; RPandM applications at Sandia National Laboratories; the soft tooling, hard tooling, and special applications of RPandM; and laminated object manufacturing. Includes a chapter on service bureaus and also a directory. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Artificial Chemical Sensing written by Joseph R. Stetter and published by The Electrochemical Society. This book was released on 2001 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 3D Printing Design written by Dr. Sabrie Soloman and published by KHANNA PUBLISHING HOUSE. This book was released on with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a detailed guide and optimum implementations to each of the stated 3D printing technology, the basic understanding of its operation, and the similarity as well as the dissimilarity functions of each printer. School Students, University undergraduates, and post graduate student will find the book of immense value to equip them not only with the fundamental in design and implementation but also will encourage them to acquire a system and practice creating their own innovative samples. Furthermore, professionals and educators will be well prepared to use the knowledge and the expertise to practice and advance the technology for the ultimate good of their respective organizations.
Download or read book Handbook of Advanced Ceramics written by T. Chartier and published by Elsevier Inc. Chapters. This book was released on 2013-04-11 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 3D Printing written by Dragan Cvetković and published by BoD – Books on Demand. This book was released on 2018-10-10 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, "3D Printing", is divided into two parts: the first part is devoted to the relationship between 3D printing and engineering, and the second part shows the impact of 3D printing on the medical sector in general. There are five sections in the first part (sections are dedicated to stereolithography, new techniques of high-resolution 3D printing, application of 3D printers in architecture and civil engineering, the additive production with the metal components and the management of production by using previously mentioned technology in more complex ways). There are four chapters in the second part with the following topics: education of medical staff through surgical simulations, tissue engineering and potential applications of 3D printing in ophthalmology and orthopedics.
Download or read book Three Dimensional Microfabrication Using Two Photon Polymerization written by Tommaso Baldacchini and published by William Andrew. This book was released on 2019-10-31 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-Dimensional Microfabrication Using Two-Photon Polymerization, Second Edition offers a comprehensive guide to TPP microfabrication and a unified description of TPP microfabrication across disciplines. It offers in-depth discussion and analysis of all aspects of TPP, including the necessary background, pros and cons of TPP microfabrication, material selection, equipment, processes and characterization. Current and future applications are covered, along with case studies that illustrate the book's concepts. This new edition includes updated chapters on metrology, synthesis and the characterization of photoinitiators used in TPP, negative- and positive-tone photoresists, and nonlinear optical characterization of polymers. This is an important resource that will be useful for scientists involved in microfabrication, generation of micro- and nano-patterns and micromachining. - Discusses the major types of nanomaterials used in the agriculture and forestry sectors, exploring how their properties make them effective for specific applications - Explores the design, fabrication, characterization and applications of nanomaterials for new Agri-products - Offers an overview of regulatory aspects regarding the use of nanomaterials for agriculture and forestry
Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources
Download or read book Intelligent Packaging written by and published by Elsevier. This book was released on 2024-04-14 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Food Quality and Safety Series" is the most up-to-date resource covering trend topics such as Advances in the analysis of toxic compounds and control of food poisoning; Food fraud, traceability and authenticity; Revalorization of agrifood industry; Natural antimicrobial compounds and application to improve the preservation of food; Non-thermal processing technologies in the food industry; Nanotechnology in food production; and Intelligent packaging and sensors for food applications.Volume 6, "Intelligent Packaging: Current technologies and applications", covers intelligent packaging by discussing the aspects of emerging technologies and strategies to obtain such packaging relevant to the development of traceable food products. Topics such as indicators, sensors, tracing devices, and intelligent packaging used in various food products, such as dairy, meat, fruits and vegetables are also explored. The series is edited by Dr. José Manuel Lorenzo and authored by a team of global experts in the fields of Food Quality and Safety, providing comprehensive knowledge to food industry personals and scientists. - Provides fundamentals and the latest developments for emerging technologies in food packaging - Covers the main novel and modern intelligent and sensors technologies and strategies to obtain intelligent packaging - Explores utilization, optimization, and the development of technologies per se on the developments of intelligent packaging
Download or read book Virtual Modelling and Rapid Manufacturing written by Paulo Jorge da Silva Bartolo and published by CRC Press. This book was released on 2005-09-15 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Virtual Modelling and Rapid Manufacturing presents essential research in the area of Virtual and Rapid Prototyping. It contains reviewed papers that were presented at the 2nd International Conference on Advanced Research in Virtual and Rapid Prototyping, held at the School of Technology and Management of the Polytechnic Institute of Leiria, Portugal, from September 28 to October 1, 2005. The volume covers a wide range of topical subjects, such as medical imaging, reverse engineering, virtual reality and prototyping, biomanufacturing and tissue engineering, advanced rapid prototyping technologies and micro-fabrication, biomimetics and materials, and concurrent engineering
Download or read book 3D printable Gel inks for Tissue Engineering written by Anuj Kumar and published by Springer Nature. This book was released on 2021-09-11 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the necessary fundamentals and background for researchers and research professionals working in the field of 3D bioprinting in tissue engineering. In 3D bioprinting, design and development of the biomaterial-inks/bio-inks is a major challenge in providing 3D microenvironments specific to anatomical and architectural demands of native tissues. The focal point of this book is to provide the basic chemistry of biomaterials, updates on current processing, developments, and challenges, and recent advancements in tissue-specific 3D printing/bioprinting. This book is will serve as a go-to reference on bioprinting and is ideal for students, researchers and professionals, working academia, government, the medical industry, and healthcare.
Download or read book Handbook of Human Factors Testing and Evaluation written by Samuel G. Charlton and published by CRC Press. This book was released on 2019-09-25 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like the first edition, the revision of this successful Handbook responds to the growing need for specific tools and methods for testing and evaluating human-system interfaces. Indications are that the market for information on these tools and applications will continue to grow in the 21st century. One of the goals of offering a second edition is to expand and emphasize the application chapters, providing contemporary examples of human factors test and evaluation (HFTE) enterprises across a range of systems and environments. Coverage of the standard tools and techniques used in HFTE have been updated as well. New features of the Handbook of Human Factors Testing and Evaluation include: *new chapters covering human performance testing, manufacturing ergonomics, anthropometry, generative design methods, and usability testing; *updated tools and techniques for modeling, simulation, embedded testing, training assessment, and psychophysiological measurement; *new applications chapters presenting human factors testing examples in aviation and avionics, forestry, road safety, and software systems; and *more examples, illustrations, graphics and tables have been added. The orientation of the current work has been toward breadth of coverage rather than in-depth treatment of a few issues or techniques. Experienced testers will find much that is familiar, as well as new tools, creative approaches, and a rekindled enthusiasm. Newcomers will discover the diversity of issues, methods, and creative approaches that make up the field. In addition, the book is written in such a way that individuals outside the profession should learn the intrinsic value and pleasure in ensuring safe, efficient, and effective operation, as well as increased user satisfaction through HFTE.
Download or read book Rapid Prototyping written by Patri K. Venuvinod and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the dawn of civilization, mankind has been engaged in the conception and manufacture of discrete products to serve the functional needs of local customers and the tools (technology) needed by other craftsmen. In fact, much of the progress in civilization can be attributed to progress in discrete product manufacture. The functionality of a discrete object depends on two entities: form, and material composition. For instance, the aesthetic appearance of a sculpture depends upon its form whereas its durability depends upon the material composition. An ideal manufacturing process is one that is able to automatically generate any form (freeform) in any material. However, unfortunately, most traditional manufacturing processes are severely constrained on all these counts. There are three basic ways of creating form: conservative, subtractive, and additive. In the first approach, we take a material and apply the needed forces to deform it to the required shape, without either adding or removing material, i. e. , we conserve material. Many industrial processes such as forging, casting, sheet metal forming and extrusion emulate this approach. A problem with many of these approaches is that they focus on form generation without explicitly providing any means for controlling material composition. In fact, even form is not created directly. They merely duplicate the external form embedded in external tooling such as dies and molds and the internal form embedded in cores, etc. Till recently, we have had to resort to the 'subtractive' approach to create the form of the tooling.
Download or read book Additive Manufacturing in Pharmaceuticals written by Subham Banerjee and published by Springer Nature. This book was released on 2023-10-15 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the different 3D/4D printing technological applications of Additive Manufacturing (AM) in Pharmaceutical Sciences. The initial chapter provides the historical perspective and current scenario of AM in pharmaceuticals. The book further discusses about different 3D printing platform technologies such as FDM, SLA, SLS, SSE, Ink-jet & binder jet principles & applications in developing advanced drug delivery systems. It also covers the methodology, materials for AM and important parameters associated with these platform technologies. The book highlights the progress and practical applications of 4D-printing technology in healthcare & pharmaceuticals fraternity as well including the essence of bioprinting in pharmaceuticals. Finally, the book reviews the regulatory guidelines, perspectives, and integration of Artificial Intelligence (AI)/Machine learning (ML) in pharmaceutical AM. This book is indeed a valuable resource for students, researchers/scholars, young start-ups/entrepreneurs, and pharmaceutical professionals by providing thorough detailing about AM in Pharmaceuticals.
Download or read book Biomedical Applications of Microfluidic Devices written by Michael R. Hamblin and published by Academic Press. This book was released on 2020-11-12 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomedical Applications of Microfluidic Devices introduces the subject of microfluidics and covers the basic principles of design and synthesis of actual microchannels. The book then explores how the devices are coupled to signal read-outs and calibrated, including applications of microfluidics in areas such as tissue engineering, organ-on-a-chip devices, pathogen identification, and drug/gene delivery. This book covers high-impact fields (microarrays, organ-on-a-chip, pathogen detection, cancer research, drug delivery systems, gene delivery, and tissue engineering) and shows how microfluidics is playing a key role in these areas, which are big drivers in biomedical engineering research. This book addresses the fundamental concepts and fabrication methods of microfluidic systems for those who want to start working in the area or who want to learn about the latest advances being made. The subjects covered are also an asset to companies working in this field that need to understand the current state-of-the-art. The book is ideal for courses on microfluidics, biosensors, drug targeting, and BioMEMs, and as a reference for PhD students. The book covers the emerging and most promising areas of biomedical applications of microfluidic devices in a single place and offers a vision of the future. - Covers basic principles and design of microfluidics devices - Explores biomedical applications to areas such as tissue engineering, organ-on-a-chip, pathogen identification, and drug and gene delivery - Includes chemical applications in organic and inorganic chemistry - Serves as an ideal text for courses on microfluidics, biosensors, drug targeting, and BioMEMs, as well as a reference for PhD students
Download or read book Rapid Prototyping Technology written by Md Enamul Hoque and published by BoD – Books on Demand. This book was released on 2011-09-26 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern engineering often deals with customized design that requires easy, low-cost and rapid fabrication. Rapid prototyping (RP) is a popular technology that enables quick and easy fabrication of customized forms/objects directly from computer aided design (CAD) model. The needs for quick product development, decreased time to market, and highly customized and low quantity parts are driving the demand for RP technology. Today, RP technology also known as solid freeform fabrication (SFF) or desktop manufacturing (DM) or layer manufacturing (LM) is regarded as an efficient tool to bring the product concept into the product realization rapidly. Though all the RP technologies are additive they are still different from each other in the way of building layers and/or nature of building materials. This book delivers up-to-date information about RP technology focusing on the overview of the principles, functional requirements, design constraints etc. of specific technology.
