Download or read book Statistical Theory with Engineering Applications written by Anders Hald and published by . This book was released on 1965 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Theory and Applications of Statistical Interference Functions written by D.L. McLeish and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph arose out of a desire to develop an approach to statistical infer ence that would be both comprehensive in its treatment of statistical principles and sufficiently powerful to be applicable to a variety of important practical problems. In the latter category, the problems of inference for stochastic processes (which arise com monly in engineering and biological applications) come to mind. Classes of estimating functions seem to be promising in this respect. The monograph examines some of the consequences of extending standard concepts of ancillarity, sufficiency and complete ness into this setting. The reader should note that the development is mathematically "mature" in its use of Hilbert space methods but not, we believe, mathematically difficult. This is in keeping with our desire to construct a theory that is rich in statistical tools for infer ence without the difficulties found in modern developments, such as likelihood analysis of stochastic processes or higher order methods, to name but two. The fundamental notions of orthogonality and projection are accessible to a good undergraduate or beginning graduate student. We hope that the monograph will serve the purpose of enriching the methods available to statisticians of various interests.

Download or read book Advances in Statistics Theory and Applications written by Indranil Ghosh and published by Springer Nature. This book was released on 2021-04-01 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited collection brings together internationally recognized experts in a range of areas of statistical science to honor the contributions of the distinguished statistician, Barry C. Arnold. A pioneering scholar and professor of statistics at the University of California, Riverside, Dr. Arnold has made exceptional advancements in different areas of probability, statistics, and biostatistics, especially in the areas of distribution theory, order statistics, and statistical inference. As a tribute to his work, this book presents novel developments in the field, as well as practical applications and potential future directions in research and industry. It will be of interest to graduate students and researchers in probability, statistics, and biostatistics, as well as practitioners and technicians in the social sciences, economics, engineering, and medical sciences.

Download or read book Statistical Analysis of Designed Experiments written by Ajit C. Tamhane and published by John Wiley & Sons. This book was released on 2012-09-12 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: A indispensable guide to understanding and designing modern experiments The tools and techniques of Design of Experiments (DOE) allow researchers to successfully collect, analyze, and interpret data across a wide array of disciplines. Statistical Analysis of Designed Experiments provides a modern and balanced treatment of DOE methodology with thorough coverage of the underlying theory and standard designs of experiments, guiding the reader through applications to research in various fields such as engineering, medicine, business, and the social sciences. The book supplies a foundation for the subject, beginning with basic concepts of DOE and a review of elementary normal theory statistical methods. Subsequent chapters present a uniform, model-based approach to DOE. Each design is presented in a comprehensive format and is accompanied by a motivating example, discussion of the applicability of the design, and a model for its analysis using statistical methods such as graphical plots, analysis of variance (ANOVA), confidence intervals, and hypothesis tests. Numerous theoretical and applied exercises are provided in each chapter, and answers to selected exercises are included at the end of the book. An appendix features three case studies that illustrate the challenges often encountered in real-world experiments, such as randomization, unbalanced data, and outliers. Minitab® software is used to perform analyses throughout the book, and an accompanying FTP site houses additional exercises and data sets. With its breadth of real-world examples and accessible treatment of both theory and applications, Statistical Analysis of Designed Experiments is a valuable book for experimental design courses at the upper-undergraduate and graduate levels. It is also an indispensable reference for practicing statisticians, engineers, and scientists who would like to further their knowledge of DOE.

Download or read book Statistical Factor Analysis and Related Methods written by Alexander T. Basilevsky and published by John Wiley & Sons. This book was released on 2009-09-25 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Statistical Factor Analysis and Related Methods Theory andApplications In bridging the gap between the mathematical andstatistical theory of factor analysis, this new work represents thefirst unified treatment of the theory and practice of factoranalysis and latent variable models. It focuses on such areasas: * The classical principal components model and sample-populationinference * Several extensions and modifications of principal components,including Q and three-mode analysis and principal components in thecomplex domain * Maximum likelihood and weighted factor models, factoridentification, factor rotation, and the estimation of factorscores * The use of factor models in conjunction with various types ofdata including time series, spatial data, rank orders, and nominalvariable * Applications of factor models to the estimation of functionalforms and to least squares of regression estimators

Download or read book Statistics for High Dimensional Data written by Peter Bühlmann and published by Springer Science & Business Media. This book was released on 2011-06-08 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern statistics deals with large and complex data sets, and consequently with models containing a large number of parameters. This book presents a detailed account of recently developed approaches, including the Lasso and versions of it for various models, boosting methods, undirected graphical modeling, and procedures controlling false positive selections. A special characteristic of the book is that it contains comprehensive mathematical theory on high-dimensional statistics combined with methodology, algorithms and illustrations with real data examples. This in-depth approach highlights the methods’ great potential and practical applicability in a variety of settings. As such, it is a valuable resource for researchers, graduate students and experts in statistics, applied mathematics and computer science.

Download or read book Models for Probability and Statistical Inference written by James H. Stapleton and published by John Wiley & Sons. This book was released on 2007-12-14 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise, yet thorough, book is enhanced with simulations and graphs to build the intuition of readers Models for Probability and Statistical Inference was written over a five-year period and serves as a comprehensive treatment of the fundamentals of probability and statistical inference. With detailed theoretical coverage found throughout the book, readers acquire the fundamentals needed to advance to more specialized topics, such as sampling, linear models, design of experiments, statistical computing, survival analysis, and bootstrapping. Ideal as a textbook for a two-semester sequence on probability and statistical inference, early chapters provide coverage on probability and include discussions of: discrete models and random variables; discrete distributions including binomial, hypergeometric, geometric, and Poisson; continuous, normal, gamma, and conditional distributions; and limit theory. Since limit theory is usually the most difficult topic for readers to master, the author thoroughly discusses modes of convergence of sequences of random variables, with special attention to convergence in distribution. The second half of the book addresses statistical inference, beginning with a discussion on point estimation and followed by coverage of consistency and confidence intervals. Further areas of exploration include: distributions defined in terms of the multivariate normal, chi-square, t, and F (central and non-central); the one- and two-sample Wilcoxon test, together with methods of estimation based on both; linear models with a linear space-projection approach; and logistic regression. Each section contains a set of problems ranging in difficulty from simple to more complex, and selected answers as well as proofs to almost all statements are provided. An abundant amount of figures in addition to helpful simulations and graphs produced by the statistical package S-Plus(r) are included to help build the intuition of readers.

Download or read book Statistical Extremes and Applications written by J. Tiago de Oliveira and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first references to statistical extremes may perhaps be found in the Genesis (The Bible, vol. I): the largest age of Methu'selah and the concrete applications faced by Noah-- the long rain, the large flood, the structural safety of the ark --. But as the pre-history of the area can be considered to last to the first quarter of our century, we can say that Statistical Extremes emer ged in the last half-century. It began with the paper by Dodd in 1923, followed quickly by the papers of Fre-chet in 1927 and Fisher and Tippett in 1928, after by the papers by de Finetti in 1932, by Gumbel in 1935 and by von Mises in 1936, to cite the more relevant; the first complete frame in what regards probabilistic problems is due to Gnedenko in 1943. And by that time Extremes begin to explode not only in what regards applications (floods, breaking strength of materials, gusts of wind, etc. ) but also in areas going from Proba bility to Stochastic Processes, from Multivariate Structures to Statistical Decision. The history, after the first essential steps, can't be written in few pages: the narrow and shallow stream gained momentum and is now a huge river, enlarging at every moment and flooding the margins. Statistical Extremes is, thus, a clear-cut field of Probability and Statistics and a new exploding area for research.

Download or read book Extreme Value Theory with Applications to Natural Hazards written by Nicolas Bousquet and published by Springer Nature. This book was released on 2021-10-09 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: This richly illustrated book describes statistical extreme value theory for the quantification of natural hazards, such as strong winds, floods and rainfall, and discusses an interdisciplinary approach to allow the theoretical methods to be applied. The approach consists of a number of steps: data selection and correction, non-stationary theory (to account for trends due to climate change), and selecting appropriate estimation techniques based on both decision-theoretic features (e.g., Bayesian theory), empirical robustness and a valid treatment of uncertainties. It also examines and critically reviews alternative approaches based on stochastic and dynamic numerical models, as well as recently emerging data analysis issues and presents large-scale, multidisciplinary, state-of-the-art case studies. Intended for all those with a basic knowledge of statistical methods interested in the quantification of natural hazards, the book is also a valuable resource for engineers conducting risk analyses in collaboration with scientists from other fields (such as hydrologists, meteorologists, climatologists).

Download or read book Introduction to Statistical Limit Theory written by Alan M. Polansky and published by CRC Press. This book was released on 2011-01-07 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: Helping students develop a good understanding of asymptotic theory, Introduction to Statistical Limit Theory provides a thorough yet accessible treatment of common modes of convergence and their related tools used in statistics. It also discusses how the results can be applied to several common areas in the field.The author explains as much of the

Download or read book Probability Theory and Statistical Applications written by Peter Zörnig and published by Walter de Gruyter GmbH & Co KG. This book was released on 2016-07-11 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible and easy-to-read book provides many examples to illustrate diverse topics in probability and statistics, from initial concepts up to advanced calculations. Special attention is devoted e.g. to independency of events, inequalities in probability and functions of random variables. The book is directed to students of mathematics, statistics, engineering, and other quantitative sciences, in particular to readers who need or want to learn by self-study. The author is convinced that sophisticated examples are more useful for the student than a lengthy formalism treating the greatest possible generality. Contents: Mathematics revision Introduction to probability Finite sample spaces Conditional probability and independence One-dimensional random variables Functions of random variables Bi-dimensional random variables Characteristics of random variables Discrete probability models Continuous probability models Generating functions in probability Sums of many random variables Samples and sampling distributions Estimation of parameters Hypothesis tests

Download or read book The Statistical Theory of Linear Systems written by E. J. Hannan and published by SIAM. This book was released on 2012-05-31 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published: New York: Wiley, c1988.

Download or read book An Introduction to Statistical Learning written by Gareth James and published by Springer Nature. This book was released on 2023-08-01 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Statistical Learning provides an accessible overview of the field of statistical learning, an essential toolset for making sense of the vast and complex data sets that have emerged in fields ranging from biology to finance, marketing, and astrophysics in the past twenty years. This book presents some of the most important modeling and prediction techniques, along with relevant applications. Topics include linear regression, classification, resampling methods, shrinkage approaches, tree-based methods, support vector machines, clustering, deep learning, survival analysis, multiple testing, and more. Color graphics and real-world examples are used to illustrate the methods presented. This book is targeted at statisticians and non-statisticians alike, who wish to use cutting-edge statistical learning techniques to analyze their data. Four of the authors co-wrote An Introduction to Statistical Learning, With Applications in R (ISLR), which has become a mainstay of undergraduate and graduate classrooms worldwide, as well as an important reference book for data scientists. One of the keys to its success was that each chapter contains a tutorial on implementing the analyses and methods presented in the R scientific computing environment. However, in recent years Python has become a popular language for data science, and there has been increasing demand for a Python-based alternative to ISLR. Hence, this book (ISLP) covers the same materials as ISLR but with labs implemented in Python. These labs will be useful both for Python novices, as well as experienced users.

Download or read book Statistical Mechanics and Statistical Methods in Theory and Applications written by E. W. Montroll and published by Springer. This book was released on 1977-09 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Probability with Statistical Applications written by Géza Schay and published by Birkhäuser. This book was released on 2016-06-17 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its second edition, this textbook serves as an introduction to probability and statistics for non-mathematics majors who do not need the exhaustive detail and mathematical depth provided in more comprehensive treatments of the subject. The presentation covers the mathematical laws of random phenomena, including discrete and continuous random variables, expectation and variance, and common probability distributions such as the binomial, Poisson, and normal distributions. More classical examples such as Montmort's problem, the ballot problem, and Bertrand’s paradox are now included, along with applications such as the Maxwell-Boltzmann and Bose-Einstein distributions in physics. Key features in new edition: * 35 new exercises * Expanded section on the algebra of sets * Expanded chapters on probabilities to include more classical examples * New section on regression * Online instructors' manual containing solutions to all exercises“/p> Advanced undergraduate and graduate students in computer science, engineering, and other natural and social sciences with only a basic background in calculus will benefit from this introductory text balancing theory with applications. Review of the first edition: This textbook is a classical and well-written introduction to probability theory and statistics. ... the book is written ‘for an audience such as computer science students, whose mathematical background is not very strong and who do not need the detail and mathematical depth of similar books written for mathematics or statistics majors.’ ... Each new concept is clearly explained and is followed by many detailed examples. ... numerous examples of calculations are given and proofs are well-detailed." (Sophie Lemaire, Mathematical Reviews, Issue 2008 m)

Download or read book Theory and Application of Statistical Energy Analysis written by Richard H Lyon and published by Elsevier. This book was released on 2014-06-28 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date second edition provides a comprehensive examination of the theory and application of Statistical Energy Analysis (SEA) in acoustics and vibration. Complete with examples and data taken from real problems this unique book also exploresthe influence of computers on SEA and emphasizes computer based SEA calculations. In addition to a discussion of the relationship between SEA and other procedures used in response estimation, Theory and Application of Statistical Energy Anlaysis, SecondEdition, explores the basic relationships between model and wave descriptions of systems.

Download or read book The Statistical Theory of Shape written by Christopher G. Small and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: In general terms, the shape of an object, data set, or image can be de fined as the total of all information that is invariant under translations, rotations, and isotropic rescalings. Thus two objects can be said to have the same shape if they are similar in the sense of Euclidean geometry. For example, all equilateral triangles have the same shape, and so do all cubes. In applications, bodies rarely have exactly the same shape within measure ment error. In such cases the variation in shape can often be the subject of statistical analysis. The last decade has seen a considerable growth in interest in the statis tical theory of shape. This has been the result of a synthesis of a number of different areas and a recognition that there is considerable common ground among these areas in their study of shape variation. Despite this synthesis of disciplines, there are several different schools of statistical shape analysis. One of these, the Kendall school of shape analysis, uses a variety of mathe matical tools from differential geometry and probability, and is the subject of this book. The book does not assume a particularly strong background by the reader in these subjects, and so a brief introduction is provided to each of these topics. Anyone who is unfamiliar with this material is advised to consult a more complete reference. As the literature on these subjects is vast, the introductory sections can be used as a brief guide to the literature.