Download or read book Statistical Physics of Fracture and Breakdown in Disordered Systems written by Bikas K. Chakrabarti and published by Oxford University Press. This book was released on 1997 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Under extreme conditions the mechanical or electrical properties of solids tend to destabilize, leading to failure or breakdown. These instabilities often nucleate or spread from disorders in the structure of the solid. This book by two experts in the field investigates current techniques for modeling these failure and breakdown processes. It illustrates the basic modeling principles through a series of computer and laboratory simulations and `table top' experiments. The book centers on three important case studies: electrical failures like fuse and dielectric breakdown; mechanical fractures; and earthquakes, which exhibit dynamic failure. The material will interest all graduate students and researchers studying disordered systems, whether their focus is the mechanical failure of solids, the electrical breakdown of conductors, or earthquake mechanics.
Download or read book Statistical Models for the Fracture of Disordered Media written by H.J. Herrmann and published by Elsevier. This book was released on 2014-06-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the beginning of the century the technological desire to master the fracture of metals, concrete or polymers has boosted research and has left behind an overwhelming amount of literature. In a field where it seems difficult to say anything simple and new, the editors and authors of this book have managed to do just that.The approach to fracture taken here was not conceived by mechanical engineers or material scientists. It is essentially the by-product of exciting developments that have occurred in the last ten to fifteen years within a branch of theoretical physics, called statistical physics. Concepts such as ``percolation'' and ``fractals'', as models for the properties of fracture are not often considered by engineers. A particular aim of this volume is to emphasize the fundamental role disorder plays in the breaking process.The main scope of the volume is pedagogical and is at the same time an overview of fracture mechanics for physicists and an introduction to new concepts of statistical physics for mechanics and engineers. To this end the first half of the book consists of introductory chapters and the second half contains the results that have emerged from this new approach.
Download or read book Statistical Physics of Fracture Breakdown and Earthquake written by Soumyajyoti Biswas and published by John Wiley & Sons. This book was released on 2015-05-04 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the authors bring together basic ideas from fracture mechanics and statistical physics, classical theories, simulation and experimental results to make the statistical physics aspects of fracture more accessible. They explain fracture-like phenomena, highlighting the role of disorder and heterogeneity from a statistical physical viewpoint. The role of defects is discussed in brittle and ductile fracture, ductile to brittle transition, fracture dynamics, failure processes with tension as well as compression: experiments, failure of electrical networks, self-organized critical models of earthquake and their extensions to capture the physics of earthquake dynamics. The text also includes a discussion of dynamical transitions in fracture propagation in theory and experiments, as well as an outline of analytical results in fiber bundle model dynamics With its wide scope, in addition to the statistical physics community, the material here is equally accessible to engineers, earth scientists, mechanical engineers, and material scientists. It also serves as a textbook for graduate students and researchers in physics.
Download or read book The Fiber Bundle written by Ferenc Kun and published by Frontiers Media SA. This book was released on 2022-01-10 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scaling and Disordered Systems written by Fereydoon Family and published by World Scientific. This book was released on 2002 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Investigation of the fractal and scaling properties of disordered systems has recently become a focus of great interest in research. Disordered or amorphous materials, like glasses, polymers, gels, colloids, ceramic superconductors and random alloys or magnets, do not have a homogeneous microscopic structure. The microscopic environment varies randomly from site to site in the system and this randomness adds to the complexity and the richness of the properties of these materials. A particularly challenging aspect of random systems is their dynamical behavior. Relaxation in disordered systems generally follows an unusual time-dependent trajectory. Applications of scaling and fractal concepts in disordered systems have become a broad area of interdisciplinary research, involving studies of the physics, chemistry, mathematics, biology and engineering aspects of random systems. This book is intended for specialists as well as graduate and postdoctoral students working in condensed-matter or statistical physics. It provides state-of-the-art information on the latest developments in this important and timely topic. The book is divided into three parts: Part I deals with critical phenomena, Part II is devoted to discussion of slow dynamics and Part III involves the application of scaling concepts to random systems. The effects of disorder at the mesoscopic scale as well as the latest results on the dynamical properties of disordered systems are presented. In particular, recent developments in static and dynamic scaling theories and applications of fractal concepts to disordered systems are discussed.
Download or read book The Science of Hysteresis written by Giorgio Bertotti and published by Elsevier. This book was released on 2005-12-20 with total page 2144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1 covers: * Mathematical models * Differential equations * Stochastic aspects of hysteresis * Binary detection using hysteresis * Models of unemployment in economics Volume 2 covers: * Physical models of magnetic hysteresis * All aspects of magnetisation dynamics Volume 3 covers: * Hysteresis phenomena in materials* Over 2100 pages, rich with supporting illustrations, figures and equations * Contains contributions from an international list of authors, from a wide-range of disciplines * Covers all aspects of hysteresis - from differential equations, and binary detection, to models of unemployment and magnetisation dynamics
Download or read book Handbook of Materials Modeling written by Sidney Yip and published by Springer Science & Business Media. This book was released on 2007-11-17 with total page 2903 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first reference of its kind in the rapidly emerging field of computational approachs to materials research, this is a compendium of perspective-providing and topical articles written to inform students and non-specialists of the current status and capabilities of modelling and simulation. From the standpoint of methodology, the development follows a multiscale approach with emphasis on electronic-structure, atomistic, and mesoscale methods, as well as mathematical analysis and rate processes. Basic models are treated across traditional disciplines, not only in the discussion of methods but also in chapters on crystal defects, microstructure, fluids, polymers and soft matter. Written by authors who are actively participating in the current development, this collection of 150 articles has the breadth and depth to be a major contributor toward defining the field of computational materials. In addition, there are 40 commentaries by highly respected researchers, presenting various views that should interest the future generations of the community. Subject Editors: Martin Bazant, MIT; Bruce Boghosian, Tufts University; Richard Catlow, Royal Institution; Long-Qing Chen, Pennsylvania State University; William Curtin, Brown University; Tomas Diaz de la Rubia, Lawrence Livermore National Laboratory; Nicolas Hadjiconstantinou, MIT; Mark F. Horstemeyer, Mississippi State University; Efthimios Kaxiras, Harvard University; L. Mahadevan, Harvard University; Dimitrios Maroudas, University of Massachusetts; Nicola Marzari, MIT; Horia Metiu, University of California Santa Barbara; Gregory C. Rutledge, MIT; David J. Srolovitz, Princeton University; Bernhardt L. Trout, MIT; Dieter Wolf, Argonne National Laboratory.
Download or read book Damage and Fracture of Disordered Materials written by Dusan Krajcinovic and published by Springer. This book was released on 2014-05-04 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principal objective of this book is to relate the random distributions of defects and material strength on the microscopic scale with the deformation and residual strength of materials on the macroscopic scale. To reach this goal the authors considered experimental, analytical and computational models on atomic, microscopic and macroscopic scales.
Download or read book The Science of Hysteresis Physical modeling micromagnetics and magnetization dynamics written by I. D. Mayergoyz and published by Gulf Professional Publishing. This book was released on 2006 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1 covers: * Mathematical models * Differential equations * Stochastic aspects of hysteresis * Binary detection using hysteresis * Models of unemployment in economics Volume 2 covers: * Physical models of magnetic hysteresis * All aspects of magnetisation dynamics Volume 3 covers: * Hysteresis phenomena in materials * Over 2100 pages, rich with supporting illustrations, figures and equations * Contains contributions from an international list of authors, from a wide-range of disciplines * Covers all aspects of hysteresis - from differential equations, and binary detection, to models of unemployment and magnetisation dynamics.
Download or read book The Fiber Bundle Model written by Alex Hansen and published by John Wiley & Sons. This book was released on 2015-11-02 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gathering research from physics, mechanical engineering, and statistics in a single resource for the first time, this text presents the background to the model, its theoretical basis, and applications ranging from materials science to earth science. The authors start by explaining why disorder is important for fracture and then go on to introduce the fiber bundle model, backed by various different applications. Appendices present the necessary mathematical, computational and statistical background required. The structure of the book allows the reader to skip some material that is too specialized, making this topic accessible to the engineering, mechanics and materials science communities, in addition to providing further reading for graduate students in statistical physics.
Download or read book Fractals and Disordered Systems written by Armin Bunde and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fractals and disordered systems have recently become the focus of intense interest in research. This book discusses in great detail the effects of disorder on mesoscopic scales (fractures, aggregates, colloids, surfaces and interfaces, glasses and polymers) and presents tools to describe them in mathematical language. A substantial part is devoted to the development of scaling theories based on fractal concepts. In ten chapters written by leading experts in the field, the reader is introduced to basic concepts and techniques in disordered systems and is led to the forefront of current research. This second edition has been substantially revised and updates the literature in this important field.
Download or read book Statistical Physics of Fracture Breakdown and Earthquake written by Soumyajyoti Biswas and published by John Wiley & Sons. This book was released on 2015-05-06 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the authors bring together basic ideas from fracture mechanics and statistical physics, classical theories, simulation and experimental results to make the statistical physics aspects of fracture more accessible. They explain fracture-like phenomena, highlighting the role of disorder and heterogeneity from a statistical physical viewpoint. The role of defects is discussed in brittle and ductile fracture, ductile to brittle transition, fracture dynamics, failure processes with tension as well as compression: experiments, failure of electrical networks, self-organized critical models of earthquake and their extensions to capture the physics of earthquake dynamics. The text also includes a discussion of dynamical transitions in fracture propagation in theory and experiments, as well as an outline of analytical results in fiber bundle model dynamics With its wide scope, in addition to the statistical physics community, the material here is equally accessible to engineers, earth scientists, mechanical engineers, and material scientists. It also serves as a textbook for graduate students and researchers in physics.
Download or read book Physics Briefs written by and published by . This book was released on 1992 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micromechanics and Nanomechanics of Composite Solids written by Shaker A. Meguid and published by Springer. This book was released on 2017-07-19 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book elucidates the most recent and highly original developments in the fields of micro- and nanomechanics and the corresponding homogenization techniques that can be reliably adopted and applied in determining the local properties, as well as the linear and nonlinear effective properties of the final architecture of these complex composite structures. Specifically, this volume, divided into three main sections—Fundamentals, Modeling, and Applications—provides recent developments in the mathematical framework of micro- and nanomechanics, including Green’s function and Eshelby’s inclusion problem, molecular mechanics, molecular dynamics, atomistic based continuum, multiscale modeling, and highly localized phenomena such as microcracks and plasticity. It is a compilation of the most recent efforts by a group of the world’s most talented and respected researchers. Ideal for graduate students in aerospace, mechanical, civil, material science, life sciences, and biomedical engineering, researchers, practicing engineers, and consultants, the book provides a unified approach in compiling micro- and nano-scale phenomena. · Elucidates recent and highly original developments in the fields of micromechanics and nanomechanics and the corresponding homogenization techniques; · Includes several new topics that are not covered in the current literature, such as micromechanics of metamaterials, electrical conductivity of CNT and graphene nanocomposites, ferroelectrics, piezoelectric, and electromagnetic materials; · Addresses highly localized phenomena such as coupled field problems, microcracks, inelasticity, dispersion of CNTs, synthesis, characterization and a number of interesting applications; · Maximizes readers’ ability to apply theories of micromechanics and nanomechanics to heterogeneous solids; · Illustrates application of micro- and nanomechanical theory to design novel composite and nanocomposite materials.
Download or read book Critical Phenomena in Natural Sciences written by Didier Sornette and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern up-to-date introduction for readers outside statistical physics. It puts emphasis on a clear understanding of concepts and methods and provides the tools that can be of immediate use in applications.
Download or read book Physical Review written by and published by . This book was released on 2000-06 with total page 1770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publishes papers that report results of research in statistical physics, plasmas, fluids, and related interdisciplinary topics. There are sections on (1) methods of statistical physics, (2) classical fluids, (3) liquid crystals, (4) diffusion-limited aggregation, and dendritic growth, (5) biological physics, (6) plasma physics, (7) physics of beams, (8) classical physics, including nonlinear media, and (9) computational physics.
Download or read book Mechanics of Materials and Interfaces written by Chandrakant S. Desai and published by CRC Press. This book was released on 2000-12-20 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: The disturbed state concept (DSC) is a unified, constitutive modelling approach for engineering materials that allows for elastic, plastic, and creep strains, microcracking and fracturing, stiffening or healing, all within a single, hierarchical framework. Its capabilities go well beyond other available material models yet lead to significant simpl
