Download or read book Motion Control in Offshore and Dredging written by P. Albers and published by Springer Science & Business Media. This book was released on 2010-06-10 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: High loads with high dynamics in severe conditions can only be driven by fluid power mechanisms. Motion Control is often used as a description in various engineering disciplines to refer to a technological solution that is able to control motion, e.g. the movement of at least one part relative to another. This volume describes how drives, sometimes very large, are designed and realised. The book gives a practical explanation of the way in which the different mechanisms described work. A distinction is made between rotating and linear drives. In the case of rotating drives, the choice for an electrical drive is becoming more and more prevalent. Linear drives remain important, because of the large forces and highly dynamic behaviour in the domain of hydraulic drive technology. Both these important technologies are extensively discussed in this book, together with design rules and the many installation requirements for applications in the offshore and dredging industry.
Download or read book Hydraulic Control Systems written by Herbert E. Merritt and published by John Wiley & Sons. This book was released on 1991-09-03 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of hydraulic control is rapidly growing and the objective of this book is to present a rational and well-balanced treatment of its components and systems. Coverage includes a review of applicable topics in fluid mechanisms; components encountered in hydraulic servo controlled systems; systems oriented issues and much more. Also offers practical suggestions concerning testing and limit cycle oscillation problems.
Download or read book Modeling Design and Simulation of Systems written by Mohamed Sultan Mohamed Ali and published by Springer. This book was released on 2017-08-24 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set CCIS 751 and CCIS 752 constitutes the proceedings of the 17th Asia Simulation Conference, AsiaSim 2017, held in Malacca, Malaysia, in August/September 2017. The 124 revised full papers presented in this two-volume set were carefully reviewed and selected from 267 submissions. The papers contained in these proceedings address challenging issues in modeling and simulation in various fields such as embedded systems; symbiotic simulation; agent-based simulation; parallel and distributed simulation; high performance computing; biomedical engineering; big data; energy, society and economics; medical processes; simulation language and software; visualization; virtual reality; modeling and Simulation for IoT; machine learning; as well as the fundamentals and applications of computing.
Download or read book Power Transmission and Motion Control PTMC 2002 written by Clifford R. Burrows and published by John Wiley & Sons. This book was released on 2002-11-08 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest research on power transmission systems Power Transmission and Motion Control is a collection of papers showcased at the 2002 PTMC conference at the University of Bath. Representing the work of researchers and industry leaders from around the world, this book features the latest developments in power transmission media and systems, with an emphasis on pneumatic and hydraulic devices and systems. Insight into current projects on the forefront of technology and innovation provides an overview of the current state of the field while informing ongoing work and suggesting direction for future projects.
Download or read book The Shock and Vibration Bulletin written by and published by . This book was released on 1980 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book INDEPENDENT METERING SYSTEM WITH ELECTRO HYDRAULIC CONTROL written by Min Cheng and published by Springer Nature. This book was released on 2024 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows an independent metering electro-hydraulic control system involving its flexible hardware layouts, complex software control, representative products and applications. The book includes one chapter introducing the background and motivation of the independent metering electro-hydraulic control system. It also includes one chapter to summarize various hardware layouts involving the utilized hydraulic components and circuits, as well as analyze their advantages and disadvantages. It emphatically consists of four chapters demonstrating the detailed multivariable control strategies from three levels: load, valve and pump, together with fault-tolerant control under the fault condition. It includes a last chapter, in which products of independent metering control valve and their applications in some typical heavy-duty mobile machinery are collective works of reviews illustrative of recent advances. This book is interesting and useful to a wide readership in the various fields of fluid power transmission and control.
Download or read book Electro Hydraulic Control Theory and Its Applications Under Extreme Environment written by Yaobao Yin and published by Butterworth-Heinemann. This book was released on 2019-02-16 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electro hydraulic Control Theory and Its Applications under Extreme Environment not only presents an overview on the topic, but also delves into the fundamental mathematic models of electro hydraulic control and the application of key hydraulic components under extreme environments. The book contains chapters on hydraulic system design, including thermal analysis on hydraulic power systems in aircraft, power matching designs of hydraulic rudder, and flow matching control of asymmetric valves and cylinders. With additional coverage on new devices, experiments and application technologies, this book is an ideal reference on the research and development of significant equipment. - Addresses valves' application in aircrafts, including servo valves, relief valves and pressure reducing valves - Presents a qualitative and quantitative forecast of future electro-hydraulic servo systems, service performance, and mechanization in harsh environments - Provides analysis methods, mathematical models and optimization design methods of electro-hydraulic servo valves under extreme environments
Download or read book Technical Note written by and published by . This book was released on 1973 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Process Control Systems Second Edition written by Dale R. Patrick and published by CRC Press. This book was released on 2021-01-18 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a basic approach to understanding and effectively applying industrial process control based on the systems concept. It provides an overview of an operating system, then divides it into sections for individual discussion. It covers topics including the operating system, process control, pressure systems, thermal systems, and level determining systems. It also addresses flow process systems, analytical process systems, microprocessor systems, automated processes, and robotic systems.
Download or read book Development of Online Hybrid Testing written by Peng Pan and published by Butterworth-Heinemann. This book was released on 2015-09-14 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Development of Online Hybrid Testing: Theory and Applications to Structural Engineering provides comprehensive treatments of several topics pertinent to substructure online hybrid tests. Emphasis has been placed on explaining the three frameworks: - the host-station framework, - separated model framework and - peer to peer framework These have been developed within the Internet environment and are particularly suitable for distributed hybrid testing. In order to help readers to understand the essence of online hybrid testing and further to build up their own systems, an engineering practice has been introduced at the end of this book with the source code appended. Development of Online Hybrid Testing: Theory and Applications to Structural Engineering is primarily written for readers with some background in structural dynamics, finite elements, and computer science. Material that has previously only appeared in journal articles has been consolidated and simplified which provides the reader with a perspective of the state-of-the-art. - Presents basics and implementations of time integration algorithms for online hybrid tests, along with the applications for real engineering projects - Includes current progress on the development of substructure online hybrid tests as a means of investigating the seismic behaviour of large-scale structures - Provides source code for the example tests
Download or read book Proceedings of the Ocean Drilling Program written by Ocean Drilling Program and published by . This book was released on 1990 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Servo Control Systems written by George W. Younkin and published by CRC Press. This book was released on 2002-10-22 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a seasoned expert, this authoritative and informative guide presents the technologies in the calculation of brushless DC motor time constants, material on drive sizing, and case studies illustrating key topics. The author details hardware specifications related to the operation of machine service drives and outlines troubleshooting methods for problems concerning machine nonlinearities, inertia, drive stiffness, and friction. He highlights recently developed simulation methods used to predict, assess, and improve the performance of service systems and their components and covers the function and assembly of drive systems, drive resolutions, drive ratios, and duty cycles.
Download or read book Tensile Testing 2nd Edition written by Joseph R. Davis and published by ASM International. This book was released on 2004 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Code of Federal Regulations written by and published by . This book was released on 1964 with total page 1108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special edition of the Federal Register, containing a codification of documents of general applicability and future effect ... with ancillaries.
Download or read book Hybrid Simulation written by Victor Saouma and published by CRC Press. This book was released on 2014-04-21 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Simulation: Theory, Implementation and Applications deals with a rapidly evolving technology combining computer simulation (typically finite element) and physical laboratory testing of two complementary substructures. It is a multidisciplinary technology which relies heavily on control theory, computer science, numerical techniques and finds applications in aerospace, civil, and mechanical engineering.
Download or read book System Dynamics written by Ernest Doebelin and published by CRC Press. This book was released on 1998-02-10 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing topics from system elements and simple first- and second-order systems to complex lumped- and distributed-parameter models of practical machines and processes, this work details the utility of systems dynamics for the analysis and design of mechanical, fluid, thermal and mixed engineering systems. It emphasizes digital simulation and int
Download or read book Smart Flow Control Processes in Micro Scale written by Bengt Sunden and published by MDPI. This book was released on 2020-12-29 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, microfluidic devices with a large surface-to-volume ratio have witnessed rapid development, allowing them to be successfully utilized in many engineering applications. A smart control process has been proposed for many years, while many new innovations and enabling technologies have been developed for smart flow control, especially concerning “smart flow control” at the microscale. This Special Issue aims to highlight the current research trends related to this topic, presenting a collection of 33 papers from leading scholars in this field. Among these include studies and demonstrations of flow characteristics in pumps or valves as well as dynamic performance in roiling mill systems or jet systems to the optimal design of special components in smart control systems.
