Download or read book State Space Approaches for Modelling and Control in Financial Engineering written by Gerasimos G. Rigatos and published by Springer. This book was released on 2017-04-04 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book conclusively solves problems associated with the control and estimation of nonlinear and chaotic dynamics in financial systems when these are described in the form of nonlinear ordinary differential equations. It then addresses problems associated with the control and estimation of financial systems governed by partial differential equations (e.g. the Black–Scholes partial differential equation (PDE) and its variants). Lastly it an offers optimal solution to the problem of statistical validation of computational models and tools used to support financial engineers in decision making. The application of state-space models in financial engineering means that the heuristics and empirical methods currently in use in decision-making procedures for finance can be eliminated. It also allows methods of fault-free performance and optimality in the management of assets and capitals and methods assuring stability in the functioning of financial systems to be established. Covering the following key areas of financial engineering: (i) control and stabilization of financial systems dynamics, (ii) state estimation and forecasting, and (iii) statistical validation of decision-making tools, the book can be used for teaching undergraduate or postgraduate courses in financial engineering. It is also a useful resource for the engineering and computer science community

Download or read book Intelligent Control for Electric Power Systems and Electric Vehicles written by G. Rigatos and published by CRC Press. This book was released on 2024-10-30 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present monograph offers a detailed and in-depth analysis of the topic of Intelligent Control for Electric Power Systems and Electric Vehicles. First, Nonlinear optimal control and Lie algebra-based control (Control based on approximate linearization and Global linearization-based control concepts) is analyzed. Next, Differential flatness theory and flatness-based control methods (Global linearization-based control with the use of differential flatness theory and Flatness-based control of nonlinear dynamical systems in cascading loops) is treated. Following the control theoretic part Control of DC and PMBLDC electric motors (Control of DC motors through a DC-DC converter and Control of Per- manent Magnet Brushless DC motors) is presented. Besides, Control of VSI-fed three-phase and multi- phase PMSMs (Nonlinear optimal control VSI-fed three-phase PMSMs and Nonlinear optimal control VSI-fed six-phase PMSMs) is explained. Additionally, Control of energy conversion chains based on PMSMs (Control of wind-turbine and PMSM-based electric power unit and Control of a PMSM-driven gas-compression unit) is studied. Besides, Control of energy conversion chains based on Induction Ma- chines (Control of the VSI-fed three-phase induction motor, Control of an induction motor-driven gas compressor and Control of induction generator-based shipboard microgrids) is explained. Next, Control of multi-phase machines in gas processing and power units (Control of gas-compressors actuated by 5-phase PMSMs and Control of 6-phase induction generators in renewable energy units) is introduced, Moreover, Control of Spherical Permanent Magnet Synchronous Motors and Switched Reluctance Mo- tors (Control of spherical permanent magnet synchronous motors, Control of switched reluctance motors for electric traction and Adaptive control for switched reluctance motors) is analyzed, Furthermore, Control of traction and powertrains in Electric Vehicles and Hybrid Electric Vehicles (Control of multi- phase motors in the traction system in electric vehicles and Control of synchronous machines and converters in power-chains of hybrid electric vehicles) is explained, Finally, Control of renewable power units and heat management units (Control of residential microgrids with Wind Generators, Fuel Cells and PVs and Control of heat pumps for thermal management in electric vehicles) it treated. The new control methods which are proposed by the monograph treat the control problem of the complex nonlinear dynamics of electric power systems and electric vehicles without the need for complicated state-space model transformations and changes of state variables. The proposed control schemes are modular and scalable and can be applied to a large class of dynamic models of electric power systems and electric vehicles. They have a clear and easy-to- implement algorithmic part, while they also exhibit a moderate computational load. The proposed control schemes foster the optimized exploitation of renewable energy sources and the reliable integration of renewable energy units in the power grid. Besides, they support the transition to electromotion and the deployment of the use of electric vehicles. The manuscript is suitable for teaching nonlinear control, estimation and fault diagnosis topics with emphasis to electric power systems and to electric vehicle traction and propulsion systems both at late undergraduate and postgraduate levels.

Download or read book IEEE Technology and Engineering Management Society Body of Knowledge TEMSBOK written by Gustavo Giannattasio and published by John Wiley & Sons. This book was released on 2023-09-25 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: IEEE Technology and Engineering Management Society Body of Knowledge (TEMSBOK) IEEE TEMS Board of Directors-approved body of knowledge dedicated to technology and engineering management The IEEE Technology and Engineering Management Society Body of Knowledge (TEMSBOK) establishes a set of common practices for technology and engineering management, acts as a reference for entrepreneurs, establishes a basis for future official certifications, and summarizes the literature on the management field in order to publish reference documentation for new initiatives. The editors have used a template approach with authors that instructed them on how to introduce their manuscript, how to organize the technology and area fundamentals, the managing approach, techniques and benefits, realistic examples that show the application of concepts, recommended best use (focusing on how to identify the most adequate approach to typical cases), with a summary and conclusion of each section, plus a list of references for further study. The book is structured according to the following area knowledge chapters: business analysis, technology adoption, innovation, entrepreneurship, project management, digital disruption, digital transformation of industry, data science and management, and ethics and legal issues. Specific topics covered include: Market requirement analysis, business analysis for governance planning, financial analysis, evaluation and control, and risk analysis of market opportunities Leading and managing working groups, optimizing group creation and evolution, enterprise agile governance, and leading agile organizations and working groups Marketing plans for new products and services, risk analysis and challenges for entrepreneurs, and procurement and collaboration Projects, portfolios and programs, economic constraints and roles, integration management and control of change, and project plan structure The IEEE Technology and Engineering Management Society Body of Knowledge (TEMSBOK) will appeal to engineers, graduates, and professionals who wish to prepare for challenges in initiatives using new technologies, as well as managers who are responsible for conducting business involving technology and engineering.

Download or read book Applied Physics System Science and Computers II written by Klimis Ntalianis and published by Springer. This book was released on 2018-06-25 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on advanced theories and methods in three related fields of research: applied physics, system science and computers. It is organized in three parts, the first of which covers applied physics topics, including lasers and accelerators; condensed matter, soft matter and materials science; nanoscience and quantum engineering; atomic, molecular, optical and plasma physics; as well as nuclear and high-energy particle physics. It also addresses astrophysics, gravitation, earth and environmental science, as well as medical and biological physics. The second and third parts focus on advances in computers and system science, respectively, and report on automatic circuit control, power systems, computer communication, fluid mechanics, simulation and modeling, software engineering, data structures and applications of artificial intelligence among other areas. Offering a collection of contributions presented at the 2nd International Conference on Applied Physics, System Science and Computers (APSAC), held in Dubrovnik, Croatia on September 27–29, 2017, the book bridges the gap between applied physics and electrical engineering. It not only to presents new methods, but also promotes collaborations between different communities working on related topics at the interface between physics and engineering, with a special focus on communication, data modeling and visualization, quantum information, applied mechanics as well as bio and geophysics.

Download or read book Advances in Applied Nonlinear Optimal Control written by Gerasimos Rigatos and published by Cambridge Scholars Publishing. This book was released on 2020-11-19 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses advances in applied nonlinear optimal control, comprising both theoretical analysis of the developed control methods and case studies about their use in robotics, mechatronics, electric power generation, power electronics, micro-electronics, biological systems, biomedical systems, financial systems and industrial production processes. The advantages of the nonlinear optimal control approaches which are developed here are that, by applying approximate linearization of the controlled systems’ state-space description, one can avoid the elaborated state variables transformations (diffeomorphisms) which are required by global linearization-based control methods. The book also applies the control input directly to the power unit of the controlled systems and not on an equivalent linearized description, thus avoiding the inverse transformations met in global linearization-based control methods and the potential appearance of singularity problems. The method adopted here also retains the known advantages of optimal control, that is, the best trade-off between accurate tracking of reference setpoints and moderate variations of the control inputs. The book’s findings on nonlinear optimal control are a substantial contribution to the areas of nonlinear control and complex dynamical systems, and will find use in several research and engineering disciplines and in practical applications.

Download or read book Robotic Manipulators and Vehicles written by Gerasimos Rigatos and published by Springer. This book was released on 2018-05-24 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph addresses problems of: • nonlinear control, estimation and filtering for robotic manipulators (multi-degree-of freedom rigid-link robots, flexible-link robots, underactuated, redundant and cooperating manipulators and closed-chain robotic mechanisms); and• nonlinear control, estimation and filtering for autonomous robotic vehicles operating on the ground, in the air, and on and under water, independently and in cooperating groups. The book is a thorough treatment of the entire range of applications of robotic manipulators and autonomous vehicles. The nonlinear control and estimation methods it develops can be used generically, being suitable for a wide range of robotic systems. Such methods can improve robustness, precision and fault-tolerance in robotic manipulators and vehicles at the same time as enabling the reliable functioning of these systems under variable conditions, model uncertainty and external perturbations.

Download or read book Fault Diagnosis for Electric Power Systems and Electric Vehicles written by G. Rigatos and published by CRC Press. This book was released on 2024-10-30 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present monograph offers a detailed and in-depth analysis of the topic of fault diagnosis for electric power systems and electric vehicles. First, the monograph treats the problem of Fault diagnosis with model-based and model-free techniques (Model-based fault diagnosis techniques and Model-free fault diagnosis techniques). Next, the monograph provides a solution for the problem of Control and fault diagnosis for Synchronous Generator-based renewable energy systems (Control of the marine-turbine and synchronous-generator unit and Fault diagnosis of the marine turbine and synchronous-generator unit. Additionally, the monograph introduces novel solutions for the problem of Fault diagnosis for electricity microgrids and gas processing units (Fault diagnosis for electric power DC microgrids and Fault diagnosis for electrically actuated gas compressors). Furthermore, the monograph analyzes and solves the problem of Fault diagnosis for gas and steam-turbine power generation units (Fault diagnosis for the gas-turbine and Synchronous Generator electric power unit and for the steam-turbine and synchronous generator power unit). Finally, the monograph provides a solution for the problem of Fault diagnosis for wind power units and for the distribution grid (Fault diagnosis for wind power generators and Fault diagnosis for the electric power distribution grid). The new fault detection and isolation methods that the monograph develops are of generic use and are addressed to a wide class of nonlinear dynamical systems, with emphasis on electric power systems and electric vehicles. On the one side, model-based fault detection and isolation methods are analyzed. In this case, known models about the dynamics of the monitored system are used by nonlinear state observers and Kalman Filters, which emulate the system’s fault-free condition. On the other side, model-free fault detection and isolation methods are analyzed. In this case, raw data are processed by neural networks and nonlinear regressors to generate models that emulate the fault-free condition of the monitored system. Statistical tests based on the processing of the residuals, which are formed between the outputs of the monitored system and the outputs of the fault-free model provide objective and almost infallible criteria about the occurrence of failures. The new fault detection and isolation methods with statistical procedures for defining fault thresholds enable early fault diagnosis and reveal incipient changes in the parameters of the monitored systems.

Download or read book Handbooks in Operations Research and Management Science Financial Engineering written by John R. Birge and published by Elsevier. This book was released on 2007-11-16 with total page 1026 pages. Available in PDF, EPUB and Kindle. Book excerpt: The remarkable growth of financial markets over the past decades has been accompanied by an equally remarkable explosion in financial engineering, the interdisciplinary field focusing on applications of mathematical and statistical modeling and computational technology to problems in the financial services industry. The goals of financial engineering research are to develop empirically realistic stochastic models describing dynamics of financial risk variables, such as asset prices, foreign exchange rates, and interest rates, and to develop analytical, computational and statistical methods and tools to implement the models and employ them to design and evaluate financial products and processes to manage risk and to meet financial goals. This handbook describes the latest developments in this rapidly evolving field in the areas of modeling and pricing financial derivatives, building models of interest rates and credit risk, pricing and hedging in incomplete markets, risk management, and portfolio optimization. Leading researchers in each of these areas provide their perspective on the state of the art in terms of analysis, computation, and practical relevance. The authors describe essential results to date, fundamental methods and tools, as well as new views of the existing literature, opportunities, and challenges for future research.

Download or read book Handbook of Financial Engineering written by Constantin Zopounidis and published by Springer Science & Business Media. This book was released on 2008-08-19 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook discusses the most recent advances within the field of financial engineering, focusing not only on the description of the existing areas in financial engineering research, but also on the new methodologies that have been developed for modeling and addressing financial engineering problems. The book is intended for financial engineers, researchers, applied mathematicians, and graduate students interested in real-world applications to financial engineering.

Download or read book Mathematical Systems Theory in Biology Communications Computation and Finance written by Joachim Rosenthal and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains survey and research articles by some of the leading researchers in mathematical systems theory - a vibrant research area in its own right. Many authors have taken special care that their articles are self-contained and accessible also to non-specialists.

Download or read book Analysis of Financial Time Series written by Ruey S. Tsay and published by John Wiley & Sons. This book was released on 2010-10-26 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a broad, mature, and systematic introduction to current financial econometric models and their applications to modeling and prediction of financial time series data. It utilizes real-world examples and real financial data throughout the book to apply the models and methods described. The author begins with basic characteristics of financial time series data before covering three main topics: Analysis and application of univariate financial time series The return series of multiple assets Bayesian inference in finance methods Key features of the new edition include additional coverage of modern day topics such as arbitrage, pair trading, realized volatility, and credit risk modeling; a smooth transition from S-Plus to R; and expanded empirical financial data sets. The overall objective of the book is to provide some knowledge of financial time series, introduce some statistical tools useful for analyzing these series and gain experience in financial applications of various econometric methods.

Download or read book Computational Intelligence in Time Series Forecasting written by Ajoy K. Palit and published by Springer Science & Business Media. This book was released on 2006-01-04 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foresight in an engineering business can make the difference between success and failure, and can be vital to the effective control of industrial systems. The authors of this book harness the power of intelligent technologies individually and in combination.

Download or read book Encyclopedia of Information Science and Technology Fourth Edition written by Khosrow-Pour, D.B.A., Mehdi and published by IGI Global. This book was released on 2017-06-20 with total page 8356 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, our world has experienced a profound shift and progression in available computing and knowledge sharing innovations. These emerging advancements have developed at a rapid pace, disseminating into and affecting numerous aspects of contemporary society. This has created a pivotal need for an innovative compendium encompassing the latest trends, concepts, and issues surrounding this relevant discipline area. During the past 15 years, the Encyclopedia of Information Science and Technology has become recognized as one of the landmark sources of the latest knowledge and discoveries in this discipline. The Encyclopedia of Information Science and Technology, Fourth Edition is a 10-volume set which includes 705 original and previously unpublished research articles covering a full range of perspectives, applications, and techniques contributed by thousands of experts and researchers from around the globe. This authoritative encyclopedia is an all-encompassing, well-established reference source that is ideally designed to disseminate the most forward-thinking and diverse research findings. With critical perspectives on the impact of information science management and new technologies in modern settings, including but not limited to computer science, education, healthcare, government, engineering, business, and natural and physical sciences, it is a pivotal and relevant source of knowledge that will benefit every professional within the field of information science and technology and is an invaluable addition to every academic and corporate library.

Download or read book Bayesian Risk Management written by Matt Sekerke and published by John Wiley & Sons. This book was released on 2015-09-15 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: A risk measurement and management framework that takes model risk seriously Most financial risk models assume the future will look like the past, but effective risk management depends on identifying fundamental changes in the marketplace as they occur. Bayesian Risk Management details a more flexible approach to risk management, and provides tools to measure financial risk in a dynamic market environment. This book opens discussion about uncertainty in model parameters, model specifications, and model-driven forecasts in a way that standard statistical risk measurement does not. And unlike current machine learning-based methods, the framework presented here allows you to measure risk in a fully-Bayesian setting without losing the structure afforded by parametric risk and asset-pricing models. Recognize the assumptions embodied in classical statistics Quantify model risk along multiple dimensions without backtesting Model time series without assuming stationarity Estimate state-space time series models online with simulation methods Uncover uncertainty in workhorse risk and asset-pricing models Embed Bayesian thinking about risk within a complex organization Ignoring uncertainty in risk modeling creates an illusion of mastery and fosters erroneous decision-making. Firms who ignore the many dimensions of model risk measure too little risk, and end up taking on too much. Bayesian Risk Management provides a roadmap to better risk management through more circumspect measurement, with comprehensive treatment of model uncertainty.

Download or read book Bayesian Inference of State Space Models written by Kostas Triantafyllopoulos and published by Springer Nature. This book was released on 2021-11-12 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bayesian Inference of State Space Models: Kalman Filtering and Beyond offers a comprehensive introduction to Bayesian estimation and forecasting for state space models. The celebrated Kalman filter, with its numerous extensions, takes centre stage in the book. Univariate and multivariate models, linear Gaussian, non-linear and non-Gaussian models are discussed with applications to signal processing, environmetrics, economics and systems engineering. Over the past years there has been a growing literature on Bayesian inference of state space models, focusing on multivariate models as well as on non-linear and non-Gaussian models. The availability of time series data in many fields of science and industry on the one hand, and the development of low-cost computational capabilities on the other, have resulted in a wealth of statistical methods aimed at parameter estimation and forecasting. This book brings together many of these methods, presenting an accessible and comprehensive introduction to state space models. A number of data sets from different disciplines are used to illustrate the methods and show how they are applied in practice. The R package BTSA, created for the book, includes many of the algorithms and examples presented. The book is essentially self-contained and includes a chapter summarising the prerequisites in undergraduate linear algebra, probability and statistics. An up-to-date and complete account of state space methods, illustrated by real-life data sets and R code, this textbook will appeal to a wide range of students and scientists, notably in the disciplines of statistics, systems engineering, signal processing, data science, finance and econometrics. With numerous exercises in each chapter, and prerequisite knowledge conveniently recalled, it is suitable for upper undergraduate and graduate courses.

Download or read book Assessment and Future Directions of Nonlinear Model Predictive Control written by Rolf Findeisen and published by Springer. This book was released on 2007-09-08 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thepastthree decadeshaveseenrapiddevelopmentin the areaofmodelpred- tive control with respect to both theoretical and application aspects. Over these 30 years, model predictive control for linear systems has been widely applied, especially in the area of process control. However, today’s applications often require driving the process over a wide region and close to the boundaries of - erability, while satisfying constraints and achieving near-optimal performance. Consequently, the application of linear control methods does not always lead to satisfactory performance, and here nonlinear methods must be employed. This is one of the reasons why nonlinear model predictive control (NMPC) has - joyed signi?cant attention over the past years,with a number of recent advances on both the theoretical and application frontier. Additionally, the widespread availability and steadily increasing power of today’s computers, as well as the development of specially tailored numerical solution methods for NMPC, bring thepracticalapplicabilityofNMPCwithinreachevenforveryfastsystems.This has led to a series of new, exciting developments, along with new challenges in the area of NMPC.

Download or read book Advanced Methodologies and Technologies in Business Operations and Management written by Khosrow-Pour, D.B.A., Mehdi and published by IGI Global. This book was released on 2018-09-14 with total page 1482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Businesses consistently work on new projects, products, and workflows to remain competitive and successful in the modern business environment. To remain zealous, businesses must employ the most effective methods and tools in human resources, project management, and overall business plan execution as competitors work to succeed as well. Advanced Methodologies and Technologies in Business Operations and Management provides emerging research on business tools such as employee engagement, payout policies, and financial investing to promote operational success. While highlighting the challenges facing modern organizations, readers will learn how corporate social responsibility and utilizing artificial intelligence improve a company’s culture and management. This book is an ideal resource for executives and managers, researchers, accountants, and financial investors seeking current research on business operations and management.