Download or read book Battery System Modeling written by Shunli Wang and published by Elsevier. This book was released on 2021-06-23 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Battery System Modeling provides advances on the modeling of lithium-ion batteries. Offering step-by-step explanations, the book systematically guides the reader through the modeling of state of charge estimation, energy prediction, power evaluation, health estimation, and active control strategies. Using applications alongside practical case studies, each chapter shows the reader how to use the modeling tools provided. Moreover, the chemistry and characteristics are described in detail, with algorithms provided in every chapter. Providing a technical reference on the design and application of Li-ion battery management systems, this book is an ideal reference for researchers involved in batteries and energy storage. Moreover, the step-by-step guidance and comprehensive introduction to the topic makes it accessible to audiences of all levels, from experienced engineers to graduates. - Explains how to model battery systems, including equivalent, electrical circuit and electrochemical nernst modeling - Includes comprehensive coverage of battery state estimation methods, including state of charge estimation, energy prediction, power evaluation and health estimation - Provides a dedicated chapter on active control strategies

Download or read book Battery Management Algorithm for Electric Vehicles written by Rui Xiong and published by Springer Nature. This book was released on 2019-09-23 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically introduces readers to the core algorithms of battery management system (BMS) for electric vehicles. These algorithms cover most of the technical bottlenecks encountered in BMS applications, including battery system modeling, state of charge (SOC) and state of health (SOH) estimation, state of power (SOP) estimation, remaining useful life (RUL) prediction, heating at low temperature, and optimization of charging. The book not only presents these algorithms, but also discusses their background, as well as related experimental and hardware developments. The concise figures and program codes provided make the calculation process easy to follow and apply, while the results obtained are presented in a comparative way, allowing readers to intuitively grasp the characteristics of different algorithms. Given its scope, the book is intended for researchers, senior undergraduate and graduate students, as well as engineers in the fields of electric vehicles and energy storage.

Download or read book Long Term Health State Estimation of Energy Storage Lithium Ion Battery Packs written by Qi Huang and published by Springer Nature. This book was released on 2023-08-18 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates in detail long-term health state estimation technology of energy storage systems, assessing its potential use to replace common filtering methods that constructs by equivalent circuit model with a data-driven method combined with electrochemical modeling, which can reflect the battery internal characteristics, the battery degradation modes, and the battery pack health state. Studies on long-term health state estimation have attracted engineers and scientists from various disciplines, such as electrical engineering, materials, automation, energy, and chemical engineering. Pursuing a holistic approach, the book establishes a fundamental framework for this topic, while emphasizing the importance of extraction for health indicators and the significant influence of electrochemical modeling and data-driven issues in the design and optimization of health state estimation in energy storage systems. The book is intended for undergraduate and graduate students who are interested in new energy measurement and control technology, researchers investigating energy storage systems, and structure/circuit design engineers working on energy storage cell and pack.

Download or read book Lithium Ion Batteries Basics and Applications written by Reiner Korthauer and published by Springer. This book was released on 2018-08-07 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The handbook focuses on a complete outline of lithium-ion batteries. Just before starting with an exposition of the fundamentals of this system, the book gives a short explanation of the newest cell generation. The most important elements are described as negative / positive electrode materials, electrolytes, seals and separators. The battery disconnect unit and the battery management system are important parts of modern lithium-ion batteries. An economical, faultless and efficient battery production is a must today and is represented with one chapter in the handbook. Cross-cutting issues like electrical, chemical, functional safety are further topics. Last but not least standards and transportation themes are the final chapters of the handbook. The different topics of the handbook provide a good knowledge base not only for those working daily on electrochemical energy storage, but also to scientists, engineers and students concerned in modern battery systems.

Download or read book Multidimensional Lithium Ion Battery Status Monitoring written by Shunli Wang and published by CRC Press. This book was released on 2022-12-28 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multidimensional Lithium-Ion Battery Status Monitoring focuses on equivalent circuit modeling, parameter identification, and state estimation in lithium-ion battery power applications. It explores the requirements of high-power lithium-ion batteries for new energy vehicles and systematically describes the key technologies in core state estimation based on battery equivalent modeling and parameter identification methods of lithium-ion batteries, providing a technical reference for the design and application of power lithium-ion battery management systems. Reviews Li-ion battery characteristics and applications. Covers battery equivalent modeling, including electrical circuit modeling and parameter identification theory Discusses battery state estimation methods, including state of charge estimation, state of energy prediction, state of power evaluation, state of health estimation, and cycle life estimation Introduces equivalent modeling and state estimation algorithms that can be applied to new energy measurement and control in large-scale energy storage Includes a large number of examples and case studies This book has been developed as a reference for researchers and advanced students in energy and electrical engineering.

Download or read book Rechargeable Lithium Batteries written by Alejandro Franco and published by Elsevier. This book was released on 2015-04-07 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rechargeable Lithium Batteries: From Fundamentals to Application provides an overview of rechargeable lithium batteries, from fundamental materials, though characterization and modeling, to applications. The market share of lithium ion batteries is fast increasing due to their high energy density and low maintenance requirements. Lithium air batteries have the potential for even higher energy densities, a requirement for the development of electric vehicles, and other types of rechargeable lithium battery are also in development. After an introductory chapter providing an overview of the main scientific and technological challenges posed by rechargeable Li batteries, Part One of this book reviews materials and characterization of rechargeable lithium batteries. Part Two covers performance and applications, discussing essential aspects such as battery management, battery safety and emerging rechargeable lithium battery technologies as well as medical and aerospace applications. - Expert overview of the main scientific and technological challenges posed by rechargeable lithium batteries - Address the important topics of analysis, characterization, and modeling in rechargeable lithium batteries - Key analysis of essential aspects such as battery management, battery safety, and emerging rechargeable lithium battery technologies

Download or read book The Proceedings of the 5th International Conference on Energy Storage and Intelligent Vehicles ICEIV 2022 written by Fengchun Sun and published by Springer Nature. This book was released on 2023-05-10 with total page 1344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes original, peer-reviewed research papers from the 5th International Conference on Energy Storage and Intelligent Vehicles (ICEIV 2022), held online, from December 3 to December 4, 2022. The topics covered include but are not limited to energy storage, power and energy systems, electrified/intelligent transportation, batteries and management, and power electronics. The papers share the latest findings in energy storage and intelligent vehicles, making the book a valuable asset for researchers, engineers, university students, etc.

Download or read book Control of Power Electronic Converters and Systems Volume 4 written by Frede Blaabjerg and published by Academic Press. This book was released on 2024-02-24 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Power Electronic Converters and Systems, Volume Four covers emerging topics in the control of power electronics and converters not covered in previous volumes, including emerging power converter topologies, storage systems, battery chargers and the smart transformer. This updated edition specifically focuses on emerging power converter topologies and discusses very recent advances and topics with applications in power electronics and formidable probable dynamics. Chapters include modeling of power converters and their control, with supportive simulations and additional experimental results.Anyone looking for fundamental knowledge regarding new trends in power electronics by application, and also ready to use models and methodologies in their design, control and testing will find this the next invaluable resource in this highly regarded series. - Combines essential control design methods and trends with different applications of power convertor topologies - Includes global perspectives, case studies and real examples from different applications and their control - Features ready-to-use models and methodologies in power electronic application, their design, control and testing

Download or read book Innovative Methods and Techniques in New Electric Power Systems written by David Gao and published by Frontiers Media SA. This book was released on 2023-04-03 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Data Science Based Full Lifespan Management of Lithium Ion Battery written by Kailong Liu and published by Springer Nature. This book was released on 2022-04-08 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book comprehensively consolidates studies in the rapidly emerging field of battery management. The primary focus is to overview the new and emerging data science technologies for full-lifespan management of Li-ion batteries, which are categorized into three groups, namely (i) battery manufacturing management, (ii) battery operation management, and (iii) battery reutilization management. The key challenges, future trends as well as promising data-science technologies to further improve this research field are discussed. As battery full-lifespan (manufacturing, operation, and reutilization) management is a hot research topic in both energy and AI fields and none specific book has focused on systematically describing this particular from a data science perspective before, this book can attract the attention of academics, scientists, engineers, and practitioners. It is useful as a reference book for students and graduates working in related fields. Specifically, the audience could not only get the basics of battery manufacturing, operation, and reutilization but also the information of related data-science technologies. The step-by-step guidance, comprehensive introduction, and case studies to the topic make it accessible to audiences of different levels, from graduates to experienced engineers.

Download or read book Smart Battery Management for Enhanced Safety written by Zhongbao Wei and published by Springer Nature. This book was released on with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Batteries in a Portable World written by and published by . This book was released on 2016 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book State of health Diagnosis of Lithium ion Battery Systems and Health based Control written by Zhiyong Xia and published by . This book was released on 2021 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lithium-ion batteries are widely used in battery energy storage systems (BESS) because of their unique advantages, such as high energy density. State-of-health (SOH) estimation, as a critical function of a battery management system (BMS), is important to improve the safety and reliability of lithium-ion BESS. One objective of this dissertation is to develop fast and accurate SOH estimation methods to overcome shortcomings of conventional methods, such as slow estimation speed. Another main objective of this dissertation is to develop battery health-based control algorithms that utilize the output of SOH estimators. Chapter 1 presents an introduction to BESS and BMS and a literature review. It points out the challenges and importance of developing SOH estimation methods with improved performance such as speed and battery health-based SOC balancing control algorithms. Chapter 2 discusses the development of an in-house autonomous battery ageing platform. The developed platform can age a battery autonomously while obtaining and recording experimentally measured data of interest to support battery health diagnosis investigation and research. Chapter 3 analyzes the aggregated battery ageing data collected from the developed autonomous battery ageing platform. Several distinctive SOH indicators are identified to reflect the degradation level of battery to support the development of SOH estimators. Chapter 4 focuses on the development of power electronics based real-time online complex impedance spectrum measurement methods. These developed measurement methods support the development of online impedance based SOH estimators which provide fast SOH estimation for battery cells. In chapter 5, the correlations between the identified SOH indicators presented in chapter 3 and the SOH values of battery cells are utilized to develop deep neural network (DNN) based SOH estimators. It is observed that the diversity of SOH indicators used as the input of DNN can substantially improve estimation performance. Chapter 6 presents a battery health based SOC balancing control method. The presented method allows for drawing energy from battery cells intelligently based on the SOH differences among different battery cells, which helps to improve energy utilization efficiency and reliability of BESS. Chapter 7 concludes the research work presented in this dissertation and discusses potential future research.

Download or read book Fault Tolerant Design and Control of Automated Vehicles and Processes written by Ralf Stetter and published by Springer. This book was released on 2019-02-14 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes strategies, methods, algorithms, frameworks and systems for the fault-tolerant design and control of automated vehicles and processes. Intelligent systems may be able to accommodate inevitable faults, but this ability requires targeted design processes and advanced control systems. This book explains the respective elements involved in automated vehicles and processes. It provides detailed descriptions of fault-tolerant design, not offered in the existent scientific literature. With regard to fault-tolerant control, the focus is on innovative methods, which can accommodate not only uncertainties, but also shared and flexible redundant elements. The book is intended to present a concise guide for researchers in the field of fault-tolerant design and control, and to provide concrete insights for design and control engineers working in the field of automated vehicles and processes.

Download or read book Proceedings of the UNIfied Conference of DAMAS IncoME and TEPEN Conferences UNIfied 2023 written by Andrew D. Ball and published by Springer Nature. This book was released on with total page 1219 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 2nd International Conference on Electronics Biomedical Engineering and Health Informatics written by Triwiyanto Triwiyanto and published by Springer Nature. This book was released on 2022-06-24 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents high-quality peer-reviewed papers from the International Conference on Electronics, Biomedical Engineering, and Health Informatics (ICEBEHI) 2021 held at Surabaya, Indonesia, virtually. The contents are broadly divided into three parts: (i) electronics, (ii) biomedical engineering, and (iii) health informatics. The major focus is on emerging technologies and their applications in the domain of biomedical engineering. It includes papers based on original theoretical, practical, and experimental simulations, development, applications, measurements, and testing. Featuring the latest advances in the field of biomedical engineering applications, this book serves as a definitive reference resource for researchers, professors, and practitioners interested in exploring advanced techniques in the field of electronics, biomedical engineering, and health informatics. The applications and solutions discussed here provide excellent reference material for future product development.

Download or read book Advances in Battery Manufacturing Service and Management Systems written by Jingshan Li and published by John Wiley & Sons. This book was released on 2016-10-24 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses the methodology and theoretical foundation of battery manufacturing, service and management systems (BM2S2), and discusses the issues and challenges in these areas This book brings together experts in the field to highlight the cutting edge research advances in BM2S2 and to promote an innovative integrated research framework responding to the challenges. There are three major parts included in this book: manufacturing, service, and management. The first part focuses on battery manufacturing systems, including modeling, analysis, design and control, as well as economic and risk analyses. The second part focuses on information technology’s impact on service systems, such as data-driven reliability modeling, failure prognosis, and service decision making methodologies for battery services. The third part addresses battery management systems (BMS) for control and optimization of battery cells, operations, and hybrid storage systems to ensure overall performance and safety, as well as EV management. The contributors consist of experts from universities, industry research centers, and government agency. In addition, this book: Provides comprehensive overviews of lithium-ion battery and battery electrical vehicle manufacturing, as well as economic returns and government support Introduces integrated models for quality propagation and productivity improvement, as well as indicators for bottleneck identification and mitigation in battery manufacturing Covers models and diagnosis algorithms for battery SOC and SOH estimation, data-driven prognosis algorithms for predicting the remaining useful life (RUL) of battery SOC and SOH Presents mathematical models and novel structure of battery equalizers in battery management systems (BMS) Reviews the state of the art of battery, supercapacitor, and battery-supercapacitor hybrid energy storage systems (HESSs) for advanced electric vehicle applications Advances in Battery Manufacturing, Services, and Management Systems is written for researchers and engineers working on battery manufacturing, service, operations, logistics, and management. It can also serve as a reference for senior undergraduate and graduate students interested in BM2S2.