Download or read book State and Parameter Estimation with Applications to Chemical Engineering Systems written by John H. Ellsworth and published by . This book was released on 1974 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book On line State and Parameter Estimation written by James Anthony Wilson and published by . This book was released on 1974 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Parameter Estimation for Chemical Engineers written by Peter Englezos and published by CRC Press. This book was released on 2000-10-12 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book determines adjustable parameters in mathematical models that describe steady state or dynamic systems, presenting the most important optimization methods used for parameter estimation. It focuses on the Gauss-Newton method and its modifications for systems and processes represented by algebraic or differential equation models.
Download or read book Optimal State Estimation for Process Monitoring Fault Diagnosis and Control written by Ch. Venkateswarlu and published by Elsevier. This book was released on 2022-01-31 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal State Estimation for Process Monitoring, Fault Diagnosis and Control presents various mechanistic model based state estimators and data-driven model based state estimators with a special emphasis on their development and applications to process monitoring, fault diagnosis and control. The design and analysis of different state estimators are highlighted with a number of applications and case studies concerning to various real chemical and biochemical processes. The book starts with the introduction of basic concepts, extending to classical methods and successively leading to advances in this field. Design and implementation of various classical and advanced state estimation methods to solve a wide variety of problems makes this book immensely useful for the audience working in different disciplines in academics, research and industry in areas concerning to process monitoring, fault diagnosis, control and related disciplines. - Describes various classical and advanced versions of mechanistic model based state estimation algorithms - Describes various data-driven model based state estimation techniques - Highlights a number of real applications of mechanistic model based and data-driven model based state estimators/soft sensors - Beneficial to those associated with process monitoring, fault diagnosis, online optimization, control and related areas
Download or read book Applied State Estimation and Association written by Chaw-Bing Chang and published by MIT Press. This book was released on 2023-08-15 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: A rigorous introduction to the theory and applications of state estimation and association, an important area in aerospace, electronics, and defense industries. Applied state estimation and association is an important area for practicing engineers in aerospace, electronics, and defense industries, used in such tasks as signal processing, tracking, and navigation. This book offers a rigorous introduction to both theory and application of state estimation and association. It takes a unified approach to problem formulation and solution development that helps students and junior engineers build a sound theoretical foundation for their work and develop skills and tools for practical applications. Chapters 1 through 6 focus on solving the problem of estimation with a single sensor observing a single object, and cover such topics as parameter estimation, state estimation for linear and nonlinear systems, and multiple model estimation algorithms. Chapters 7 through 10 expand the discussion to consider multiple sensors and multiple objects. The book can be used in a first-year graduate course in control or system engineering or as a reference for professionals. Each chapter ends with problems that will help readers to develop derivation skills that can be applied to new problems and to build computer models that offer a useful set of tools for problem solving. Readers must be familiar with state-variable representation of systems and basic probability theory including random and stochastic processes.
Download or read book Studies in Nonlinear Parameter Estimation in Chemical Engineering written by Gustav H. Beerel and published by . This book was released on 1987 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific Computing in Chemical Engineering written by Frerich Keil and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific Computing in Chemical Engineering gives the state of the art from the point of view of the numerical mathematicians as well as from the engineers. The application of modern methods in numerical mathematics on problems in chemical engineering, especially reactor modeling, process simulation, process optimization and the use of parallel computing is detailed.
Download or read book State Estimation for Dynamic Systems written by Felix L. Chernousko and published by CRC Press. This book was released on 1993-11-09 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: State Estimation for Dynamic Systems presents the state of the art in this field and discusses a new method of state estimation. The method makes it possible to obtain optimal two-sided ellipsoidal bounds for reachable sets of linear and nonlinear control systems with discrete and continuous time. The practical stability of dynamic systems subjected to disturbances can be analyzed, and two-sided estimates in optimal control and differential games can be obtained. The method described in the book also permits guaranteed state estimation (filtering) for dynamic systems in the presence of external disturbances and observation errors. Numerical algorithms for state estimation and optimal control, as well as a number of applications and examples, are presented. The book will be an excellent reference for researchers and engineers working in applied mathematics, control theory, and system analysis. It will also appeal to pure and applied mathematicians, control engineers, and computer programmers.
Download or read book Scientific Computing in Chemical Engineering II written by Frerich Keil and published by Springer Science & Business Media. This book was released on 1999-05-19 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of modern methods in numerical mathematics on problems in chemical engineering is essential for designing, analyzing and running chemical processes and even entire plants. Scientific Computing in Chemical Engineering II gives the state of the art from the point of view of numerical mathematicians as well as that of engineers. The present volume as part of a two-volume edition covers topics such as computer-aided process design, combustion and flame, image processing, optimization, control, and neural networks. The volume is aimed at scientists, practitioners and graduate students in chemical engineering, industrial engineering and numerical mathematics.
Download or read book Control and Optimisation of Process Systems written by and published by Academic Press. This book was released on 2013-04-25 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Chemical Engineering was established in 1960 and is the definitive serial in the area. It is one of great importance to organic chemists, polymer chemists, and many biological scientists. Written by established authorities in the field, the comprehensive reviews combine descriptive chemistry and mechanistic insight and yield an understanding of how the chemistry drives the properties. This volume focuses on control and optimisation of process systems. - Advances in Chemical Engineering was established in 1960 and is the definitive serial in the area. It is one of great importance to organic chemists, polymer chemists, and many biological scientists - Written by established authorities in the field, the comprehensive reviews combine descriptive chemistry and mechanistic insight and yield an understanding of how the chemistry drives the properties - Focuses on control and optimization of process systems
Download or read book Parameter Estimation in Nonlinear Continuous time Dynamic Models with Modelling Errors and Process Disturbances written by M. Saeed Varziri and published by . This book was released on 2008 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model-based control and process optimization technologies are becoming more commonly used by chemical engineers. These algorithms rely on fundamental or empirical models that are frequently described by systems of differential equations with unknown parameters. It is, therefore, very important for modellers of chemical engineering processes to have access to reliable and efficient tools for parameter estimation in dynamic models. The purpose of this thesis is to develop an efficient and easy-to-use parameter estimation algorithm that can address difficulties that frequently arise when estimating parameters in nonlinear continuous-time dynamic models of industrial processes. The proposed algorithm has desirable numerical stability properties that stem from using piece-wise polynomial discretization schemes to transform the model differential equations into a set of algebraic equations. Consequently, parameters can be estimated by solving a nonlinear programming problem without requiring repeated numerical integration of the differential equations. Possible modelling discrepancies and process disturbances are accounted for in the proposed algorithm, and estimates of the process disturbance intensities can be obtained along with estimates of model parameters and states. Theoretical approximate confidence interval expressions for the parameters are developed. Through a practical two-phase nylon reactor example, as well as several simulation studies using stirred tank reactors, it is shown that the proposed parameter estimation algorithm can address difficulties such as: different types of measured responses with different levels of measurement noise, measurements taken at irregularly-spaced sampling times, unknown initial conditions for some state variables, unmeasured state variables, and unknown disturbances that enter the process and influence its future behaviour.
Download or read book Parameter estimation for challenging phase equilibria written by Johannes-Robert Bruch and published by BoD – Books on Demand. This book was released on 2021-09-13 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis consists of three parts; in the first part, parameter sets of the Non-Random Two-Liquid (NRTL) model for five challenging binary liquid-liquid equilibria (LLE) relevant to the cluster of excellence Tailor-Made Fuels from Biomass (TMFB) are generated by means of the AVT.SVT in-house tool BOARPET (Bilevel Optimization Algorithm for Rigorous and Robust Parameter Estimation in Thermodynamics). In the 2nd part, the risks that may result from the aforementioned violation of thermodynamic criteria for process simulation are assessed, by means of several unit operation models in Aspen Plus, as well as flash simulations, formulated and solved in GAMS. The respective parameter sets are selected from the first part, either because these are found to result in violation of thermodynamics, or due to the particular shape of the implied Gibbs free energy curve with respect to composition. In the 3rd part, stoichiometric and non-stoichiometric formulations from literature for the simulation of combined diffusive and chemical equilibrium are compared using local and global solvers through GAMS, for the case study SBA/DSBE/water. The publication is made within the framework of a scientific cooperation at the Vilnius University of Technology/Lithuania.
Download or read book Model Based Parameter Estimation written by Hans Georg Bock and published by Springer Science & Business Media. This book was released on 2013-02-26 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This judicious selection of articles combines mathematical and numerical methods to apply parameter estimation and optimum experimental design in a range of contexts. These include fields as diverse as biology, medicine, chemistry, environmental physics, image processing and computer vision. The material chosen was presented at a multidisciplinary workshop on parameter estimation held in 2009 in Heidelberg. The contributions show how indispensable efficient methods of applied mathematics and computer-based modeling can be to enhancing the quality of interdisciplinary research. The use of scientific computing to model, simulate, and optimize complex processes has become a standard methodology in many scientific fields, as well as in industry. Demonstrating that the use of state-of-the-art optimization techniques in a number of research areas has much potential for improvement, this book provides advanced numerical methods and the very latest results for the applications under consideration.
Download or read book Numerical Methods for Chemical Engineering written by Kenneth J. Beers and published by Cambridge University Press. This book was released on 2007 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of numerical mathematics and scientific computing to chemical engineering.
Download or read book Control and Estimation in Distributed Parameter Systems written by H. T. Banks and published by SIAM. This book was released on 1992-01-01 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research in control and estimation of distributed parameter systems encompasses a wide range of applications including both fundamental science and emerging technologies. The latter include smart materials (piezoceramics, shape memory alloys, magnetostrictives, electrorheological fluids) fabrication and testing, design of high-pressure chemical vapor deposition (CVD) reactors for production of microelectronic surfaces (e.g., semiconductors), while the former include groundwater contamination cleanup and other environmental modeling questions, climatology, flow control, and fluid-structure interactions as well as more traditional topics in biology, mechanics, and acoustics. These expository papers provide substantial stimulus to both young researchers and experienced investigators in control theory. Includes a comprehensive and lucid presentation that relates frequency domain techniques to state-space or time domain approaches for infinite-dimensional systems including design of robust stabilizing and finite-dimensional controllers for infinite-dimensional systems. It focuses on these two approaches to control design in an integrated system theoretic framework. This is excellent reading for researchers in both the frequency domain and time domain control communities. In other articles, topics considered include pointwise control of distributed parameter systems, bounded and unbounded sensors and actuators, stabilization issues for large flexible structures, and an overview discussion of damping models for flexible structures.
Download or read book Parameter Estimation in Dynamic Systems with Application to Power Engineering written by Lennart Ekstam and published by . This book was released on 1987 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Software for Chemical Engineers Second Edition written by Mariano Martín Martín and published by CRC Press. This book was released on 2019-06-06 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of Chemical Engineering and its link to computer science is in constant evolution and new engineers have a variety of tools at their disposal to tackle their everyday problems. Introduction to Software for Chemical Engineers, Second Edition provides a quick guide to the use of various computer packages for chemical engineering applications. It covers a range of software applications from Excel and general mathematical packages such as MATLAB and MathCAD to process simulators, CHEMCAD and ASPEN, equation-based modeling languages, gProms, optimization software such as GAMS and AIMS, and specialized software like CFD or DEM codes. The different packages are introduced and applied to solve typical problems in fluid mechanics, heat and mass transfer, mass and energy balances, unit operations, reactor engineering, process and equipment design and control. This new edition offers a wider view of packages including open source software such as R, Python and Julia. It also includes complete examples in ASPEN Plus, adds ANSYS Fluent to CFD codes, Lingo to the optimization packages, and discusses Engineering Equation Solver. It offers a global idea of the capabilities of the software used in the chemical engineering field and provides examples for solving real-world problems. Written by leading experts, this book is a must-have reference for chemical engineers looking to grow in their careers through the use of new and improving computer software. Its user-friendly approach to simulation and optimization as well as its example-based presentation of the software, makes it a perfect teaching tool for both undergraduate and master levels.
