Download or read book Stability and Vibrations of Thin Walled Composite Structures written by Haim Abramovich and published by Woodhead Publishing. This book was released on 2017-05-29 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stability and Vibrations of Thin-Walled Composite Structures presents engineering and academic knowledge on the stability (buckling and post buckling) and vibrations of thin walled composite structures like columns, plates, and stringer stiffened plates and shells, which form the basic structures of the aeronautical and space sectors. Currently, this knowledge is dispersed in several books and manuscripts, covering all aspects of composite materials. The book enables both engineers and academics to locate valuable, up-to-date knowledge on buckling and vibrations, be it analytical or experimental, and use it for calculations or comparisons. The book is also useful as a textbook for advanced-level graduate courses. - Presents a unified, systematic, detailed and comprehensive overview of the topic - Contains contributions from leading experts in the field - Includes a dedicated section on testing and experimental results

Download or read book Stability and Vibrations of Thin Walled Composite Structures written by and published by . This book was released on 2018-05 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, the growth in structural materials, analytical methods and design tools has greatly promoted the development and applications of thin-walled structures in different fields. Thin-walled structures are broadly utilized in building construction, bridge construction, storage racks, transmission towers, automotive, ships, aircraft, etc. Many factors, including cost and weight economy, new materials and processes and the growth of powerful methods of analysis have contributed to this growth, which concentrates specifically on structures in which problems arise due to the thinness of the walls. This book 'Stability and Vibrations of Thin-Walled Composite Structures' brings together state of the art information on the most recent advances from the global research and development community regarding new theories, experiment, design methods and applications. It reviews on the stability and vibrations of thin walled composite structures such as columns, plates, and stringer stiffened plates and shells to enables both engineers and academics to locate valuable, up-to-date knowledge on buckling and vibrations, be it methodical or tentative, and use it for estimation or evaluation. This book serves as valuable guide for students, researchers and engineering professionals working in structural mechanics, aerospace and composite structures. The book will be of interest to all those working in the field of thin-walled structures. Specifically, advanced graduate students in mechanical and aerospace engineering and applied mathematics as well as practicing engineers will find new and important results in this book.

Download or read book Thin Walled Composite Beams written by Liviu Librescu and published by Springer Science & Business Media. This book was released on 2006-01-15 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This is the first monograph devoted to the foundation of the theory of composite anisotropic thin-walled beams and to its applications in various problems involving the aeronautical/aerospace, helicopter, naval and mechanical structures. Throughout the theoretical part, an effort was made to provide the treatment of the subject by using the equations of the 3-D elasticity theory. Non-classical effects such as transverse shear, warping constraint, anisotropy of constituent materials yielding the coupling of twist-bending (lateral), bending (transversal)-extension have been included and their implications have been thoroughly analyzed. Thermal effects have been included and in order to be able to circumvent their deleterious effects, functionally graded materials have been considered in their construction. Implications of the application of the tailoring technique and of the active feedback control on free vibration, dynamic response, instability and aeroelasticity of such structures have been amply investigated. Special care was exercised throughout this work to address and validate the adopted solution methodologies and the obtained results against those available in the literature and obtained via numerical or experimental means.

Download or read book Nonlinear Mechanics of Shells and Plates in Composite Soft and Biological Materials written by Marco Amabili and published by Cambridge University Press. This book was released on 2018-11 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book guides the reader into the modelling of shell structures in applications where advanced composite materials or complex biological materials must be described with great accuracy. A valuable resource for researchers, professionals and graduate students, it presents a variety of practical concepts, diagrams and numerical results.

Download or read book Stability and Load Carrying Capacity of Thin walled Composite Structures with BVIDs written by Adrian Gliszczyński and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Topics Of Thin walled Structures written by Haim Abramovich and published by World Scientific. This book was released on 2021-06-10 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique compendium presents some new topics related to thin-walled structures, like beams, plates and shells used in aerospace structures. It highlights their dynamic behaviors and also the correlation between compressive loading and natural frequency to enable a correlation between the two, yielding a valuable non-destructive tool, to predict buckling for thin-walled structures.This useful reference text combines valuable data on metal materials and composite materials together with new adaptive and smart materials like piezoelectricity, shape memory alloys and optic fibers, which form the present state of the art in thin-walled structure domain.

Download or read book Advanced Aerospace Materials written by Haim Abramovich and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-08-19 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Aerospace Materials is intended for engineers and students of aerospace, materials, and mechanical engineering. It covers the transition from aluminum to composite materials for aerospace structures and will include essential and advanced analyses used in today’s aerospace industries. Various aspects of design, failure and monitoring of structural components will be derived and presented accompanied by relevant formulas and analyses.

Download or read book Proceedings of the 7th International Conference on Industrial Engineering ICIE 2021 written by Andrey A. Radionov and published by Springer Nature. This book was released on 2022-01-01 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering is discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 7th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia, in May 2021. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.

Download or read book Stressed Composite Structures written by A.G. Kolpakov and published by Springer Science & Business Media. This book was released on 2012-11-08 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanics of structures with initial stresses is a traditional part of structural mechanics. It is closely related to the important problem of stability of structures. The basic concepts of elastic stability of structures go back to works by Euler (1759) and Bryan (1889). Later, it was found that the problem of deformation of solids with initial stresses is related to variational principles and nonlinear problems in elasticity; see Trefftz (1933), Marguerre (1938), Prager (1947), Hill (1958), Washuzu (1982). Historical detail up to the 1940s can be found in the book by Timoshenko (1953). Observing the basic concepts of the traditional mechanics of stressed structures, we agree that these are suitable for uniform structural elements (plates, beams, and so on) made of homogeneous materials, but not for complex structures (such as a network plate or a lattice mast) or structures made of composite materials (such as fiber reinforced or textile materials). Many concepts of the classical theory, such as a cross section or neutral plane (axis), correspond to no mechanical objects if we consider an inhomogeneous structure. As a result, we come to the conclusion that it would be useful to have a theory of thin inhomogeneous structures developed on the basis of 3-D elasticity theory with no simplifying assumptions (with no a priori hypothesis).

Download or read book Design and Manufacture of Structural Composites written by Lee Harper and published by Woodhead Publishing. This book was released on 2022-11-30 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Manufacture of Structural Composites provides an overview of the main manufacturing challenges encountered when processing fibre-reinforced composite materials. Composites are unique in that the material is created at the same time as the structure, forming a very close link between the constituents, the manufacturing process and the resulting mechanical performance. This book takes an in-depth look at material choices and the intermediate steps required to convert different fibre and matrix combinations into finished products. It provides an insight into recent developments for each of the manufacturing processes covered, addressing design, cost, rate and mechanical performance. Topics covered include an introduction to composite materials, material preforming and conversion, moulding, digital design and sustainability, which addresses waste reduction, disassembly and fibre recovery. This book has been developed primarily as a teaching resource with contributions from leading experts in the field. The content has evolved from courses given by the authors to mechanical engineering and materials science students, at both undergraduate and postgraduate levels. It also draws upon experience gained during research projects and from leading industry experts. It therefore provides non-specialists with a valuable introduction to composite manufacturing techniques, helping to determine the most suitable manufacturing routes and to understand the challenges associated with the production of high-performance composite components. - Provides an overview of the most common manufacturing routes for fibre reinforced composites, including the influence of the manufacturing route on mechanical properties, production volume and component cost - Discusses recent advances in composite manufacturing, including the use of automation, process simulation, digital factories, and solutions to improve sustainability - Looks at where the composites sector is heading and discusses some of the challenges faced by end-users looking to scale up production and increase the uptake of fibre-reinforced composites for structural applications

Download or read book Handbook On Timoshenko ehrenfest Beam And Uflyand Mindlin Plate Theories written by Isaac E Elishakoff and published by World Scientific. This book was released on 2019-10-29 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: The refined theory of beams, which takes into account both rotary inertia and shear deformation, was developed jointly by Timoshenko and Ehrenfest in the years 1911-1912. In over a century since the theory was first articulated, tens of thousands of studies have been performed utilizing this theory in various contexts. Likewise, the generalization of the Timoshenko-Ehrenfest beam theory to plates was given by Uflyand and Mindlin in the years 1948-1951.The importance of these theories stems from the fact that beams and plates are indispensable, and are often occurring elements of every civil, mechanical, ocean, and aerospace structure.Despite a long history and many papers, there is not a single book that summarizes these two celebrated theories. This book is dedicated to closing the existing gap within the literature. It also deals extensively with several controversial topics, namely those of priority, the so-called 'second spectrum' shear coefficient, and other issues, and shows vividly that the above beam and plate theories are unnecessarily overcomplicated.In the spirit of Einstein's dictum, 'Everything should be made as simple as possible but not simpler,' this book works to clarify both the Timoshenko-Ehrenfest beam and Uflyand-Mindlin plate theories, and seeks to articulate everything in the simplest possible language, including their numerous applications.This book is addressed to graduate students, practicing engineers, researchers in their early career, and active scientists who may want to have a different look at the above theories, as well as readers at all levels of their academic or scientific career who want to know the history of the subject. The Timoshenko-Ehrenfest Beam and Uflyand-Mindlin Plate Theories are the key reference works in the study of stocky beams and thick plates that should be given their due and remain important for generations to come, since classical Bernoulli-Euler beam and Kirchhoff-Love theories are applicable for slender beams and thin plates, respectively.Related Link(s)

Download or read book Nonlinear Vibrations and Stability of Shells and Plates written by Marco Amabili and published by Cambridge University Press. This book was released on 2008-01-14 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book explores both theoretical and experimental aspects of nonlinear vibrations and stability of shells and plates. It is ideal for researchers, professionals, students, and instructors. Expert researchers will find the most recent progresses in nonlinear vibrations and stability of shells and plates, including advanced problems of shells with fluid-structure interaction. Professionals will find many practical concepts, diagrams, and numerical results, useful for the design of shells and plates made of traditional and advanced materials. They will be able to understand complex phenomena such as dynamic instability, bifurcations, and chaos, without needing an extensive mathematical background. Graduate students will find (i) a complete text on nonlinear mechanics of shells and plates, collecting almost all the available theories in a simple form, (ii) an introduction to nonlinear dynamics, and (iii) the state of art on the nonlinear vibrations and stability of shells and plates, including fluid-structure interaction problems.

Download or read book The Behavior of Thin Walled Structures Beams Plates and Shells written by Jack R. Vinson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended primarily as a teaching text, as well as a reference for individual study in the behavior of thin walled structural components. Such structures are widely used in the engineering profession for spacecraft, missiles, aircraft, land-based vehicles, ground structures, ocean craft, underwater vessels and structures, pressure vessels, piping, chemical processing equipment, modern housing, etc. It presupposes that the reader has already completed one basic course in the mechanics or strength of materials. It can be used for both undergraduate and graduate courses. Since beams (columns, rods), plates and shells comprise components of so many of these modern structures, it is necessary for engineers to have a working knowledge of their behavior when these structures are subjected to static, dynamic (vibration and shock) and environmental loads. Since this text is intended for both teaching and self-study, it stresses fundamental behavior and techniques of solution. It is not an encyclopedia of all research or design data, but provides the reader the wherewithal to read and study the voluminous literature. Chapter 1 introduces the three-dimensional equations oflinear elasticity, deriving them to the extent necessary to treat the following material. Chapter 2 presents, in a concise way, the basic assumptions and derives the governing equations for classical Bernoulli-Euler beams and plates in a manner that is clearly understood.

Download or read book Shell Structures Theory and Applications Volume 4 written by Wojciech Pietraszkiewicz and published by CRC Press. This book was released on 2017-10-30 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shells are basic structural elements of modern technology and everyday life. Examples of shell structures in technology include automobile bodies, water and oil tanks, pipelines, silos, wind turbine towers, and nanotubes. Nature is full of living shells such as leaves of trees, blooming flowers, seashells, cell membranes or wings of insects. In the human body arteries, the eye shell, the diaphragm, the skin and the pericardium are all shells as well. Shell Structures: Theory and Applications, Volume 4 contains 132 contributions presented at the 11th Conference on Shell Structures: Theory and Applications (Gdansk, Poland, 11-13 October 2017). The papers reflect a wide spectrum of scientific and engineering problems from theoretical modelling through strength, stability and dynamic behaviour, numerical analyses, biomechanic applications up to engineering design of shell structures. Shell Structures: Theory and Applications, Volume 4 will be of interest to academics, researchers, designers and engineers dealing with modelling and analyses of shell structures. It may also provide supplementary reading to graduate students in Civil, Mechanical, Naval and Aerospace Engineering.

Download or read book Enriched Numerical Techniques written by Azher Jameel and published by Elsevier. This book was released on 2024-05-09 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enriched Numerical Techniques: Implementation and Applications explores recent advances in enriched numerical techniques, including the extended finite element method, meshfree methods, extended isogeometric analysis and coupled numerical techniques. Techniques for implementation and programming issues are discussed, with other sections discussing applications for enriched numerical techniques in solving a range of engineering problems. The level set methodologies for complex shaped irregularities is presented, as are enriched numerical methodologies for various complex and advanced problems such as Nonlinear Structural Analysis, Fracture and Fatigue in Structures, Elasto-Plastic Crack Growth, Large Deformation Analysis, Frictional Contact Problems, Thermo-Mechanical Problems, Fluid Flow Investigations, Composite Materials and Bio-mechanics. - Features explanations on how to use enriched numerical techniques to model problems in fracture mechanics, continuum mechanics, fluid flow, and biomechanics - Explains methods through the use of worked examples throughout - Provides practical advice on how to tackle programming issues

Download or read book Recent Developments in the Theory of Shells written by Holm Altenbach and published by Springer Nature. This book was released on 2019-09-25 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book commemorates the 80th birthday of Prof. W. Pietraszkiewicz, a prominent specialist in the field of general shell theory. Reflecting Prof. Pietraszkiewicz’s focus, the respective papers address a range of current problems in the theory of shells. In addition, they present other structural mechanics problems involving dimension-reduced models. Lastly, several applications are discussed, including material models for such dimension-reduced structures.

Download or read book Stability and Vibration in Thin walled Structures written by and published by . This book was released on 2002 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: