Download or read book Fundamentals of Signals and Systems Using MATLAB written by Edward W. Kamen and published by Macmillan College. This book was released on 1997 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents an accessible yet comprehensive analytical treatment of signals and systems, and also incorporates a strong emphasis on solving problems and exploring concepts using MATLAB

Download or read book Signal Processing for Active Control written by Stephen Elliott and published by Elsevier. This book was released on 2000-09-26 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Signal Processing for Active Control sets out the signal processing and automatic control techniques that are used in the analysis and implementation of active systems for the control of sound and vibration. After reviewing the performance limitations introduced by physical aspects of active control, Stephen Elliott presents the calculation of the optimal performance and the implementation of adaptive real time controllers for a wide variety of active control systems.Active sound and vibration control are technologically important problems with many applications. 'Active control' means controlling disturbance by superimposing a second disturbance on the original source of disturbance. Put simply, initial noise + other specially-generated noise or vibration = silence [or controlled noise]. This book presents a unified approach to techniques that are used in the analysis and implementation of different control systems. It includes practical examples at the end of each chapter to illustrate the use of various approaches.This book is intended for researchers, engineers, and students in the field of acoustics, active control, signal processing, and electrical engineering.

Download or read book Active Control of Sound written by P. A. Nelson and published by . This book was released on 1993 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes modern techniques for reducing the level of airborne noise through the introduction of sound radiated by additional secondary sources, bringing together the results of contemporary research in this area. It is the combination of the physical properties of sound fields and modern digital signal processing technology that has made the active control of sound a practical proposition in a number of important applications. The book covers both these aspects of the subject, initially at a fundamental level, and then in detail in later chapters. The structure of the book is such that it should be suitable for both those seeking a basic understanding of the subject and as a reference for researchers in the field. A key feature of the work is the unified presentation of material from the two disciplines of acoustics and signal processing.

Download or read book Springer Handbook of Speech Processing written by Jacob Benesty and published by Springer. This book was released on 2007-11-22 with total page 1170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook plays a fundamental role in sustainable progress in speech research and development. With an accessible format and with accompanying DVD-Rom, it targets three categories of readers: graduate students, professors and active researchers in academia, and engineers in industry who need to understand or implement some specific algorithms for their speech-related products. It is a superb source of application-oriented, authoritative and comprehensive information about these technologies, this work combines the established knowledge derived from research in such fast evolving disciplines as Signal Processing and Communications, Acoustics, Computer Science and Linguistics.

Download or read book Advanced Contemporary Control written by Andrzej Bartoszewicz and published by Springer Nature. This book was released on 2020-06-24 with total page 1560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 20th Polish Control Conference. A triennial event that was first held in 1958, the conference successfully combines its long tradition with a modern approach to shed light on problems in control engineering, automation, robotics and a wide range of applications in these disciplines. The book presents new theoretical results concerning the steering of dynamical systems, as well as industrial case studies and worked solutions to real-world problems in contemporary engineering. It particularly focuses on the modelling, identification, analysis and design of automation systems; however, it also addresses the evaluation of their performance, efficiency and reliability. Other topics include fault-tolerant control in robotics, automated manufacturing, mechatronics and industrial systems. Moreover, it discusses data processing and transfer issues, covering a variety of methodologies, including model predictive, robust and adaptive techniques, as well as algebraic and geometric methods, and fractional order calculus approaches. The book also examines essential application areas, such as transportation and autonomous intelligent vehicle systems, robotic arms, mobile manipulators, cyber-physical systems, electric drives and both surface and underwater marine vessels. Lastly, it explores biological and medical applications of the control-theory-inspired methods.

Download or read book Least Mean Square Adaptive Filters written by Simon Haykin and published by John Wiley & Sons. This book was released on 2003-09-08 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by the original inventor of the technology. Includes contributions by the foremost experts in the field. The only book to cover these topics together.

Download or read book Concept of Adaptive Filtering written by Shivendra Nandan and published by TSG Publications. This book was released on with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: A spline adaptive filter (SAF) based nonlinear active noise control (ANC) system is proposed in this paper. The SAF consists of a linear network of adaptive weights in a cascade with an adaptive nonlinear network. The nonlinear network, in turn consists of an adaptive look-up table followed by a spline interpolation network and forms an adaptive activation function. An update rule has been derived for the proposed ANC system, which not only updates the weights of the linear network, but also updates the nature of the activation function. Linear Network is based on improvement in FxLMS algorithm. FxLMS algorithm is used because it is computationally simple like the most commonly used Least Mean Square (LMS) algorithm. In addition, it includes secondary path effects. To make the FxLMS algorithm more effective, the secondary path estimation should be more precise and accurate. The nonlinear function involved in the adaptation process is based on a spline function that can be modified during learning. The spline control points are adaptively changed using gradient-based techniques. B-splines and Catmull-Rom splines are used, because they allow imposing simple constraints on control parameters. This new kind of adaptive function is then applied to the output of a linear adaptive filter and it is used for the identification of Wiener-type nonlinear systems. In addition, we derive a simple form of the adaptation algorithm and an upper bound on the choice of the step-size. An extensive simulation study has been conducted to evaluate the noise mitigation performance of the proposed scheme and the new method has been shown to provide improved noise cancellation efficiency with a lesser computational load in comparison with other popular ANC systems.

Download or read book Recent Development in Wireless Sensor and Ad hoc Networks written by Srikanta Patnaik and published by Springer. This book was released on 2014-12-01 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless Sensor Network (WSN) consists of numerous physically distributed autonomous devices used for sensing and monitoring the physical and/or environmental conditions. A WSN uses a gateway that provides wireless connectivity to the wired world as well as distributed networks. There are many open problems related to Ad-Hoc networks and its applications. Looking at the expansion of the cellular infrastructure, Ad-Hoc network may be acting as the basis of the 4th generation wireless technology with the new paradigm of ‘anytime, anywhere communications’. To realize this, the real challenge would be the security, authorization and management issues of the large scale WSNs. This book is an edited volume in the broad area of WSNs. The book covers various chapters like Multi-Channel Wireless Sensor Networks, its Coverage, Connectivity as well as Deployment. It covers comparison of various communication protocols and algorithms such as MANNET, ODMRP and ADMR Protocols for Ad hoc Multicasting, Location Based Coordinated Routing Protocol and other Token based group local mutual exclusion Algorithms. The book also covers a chapter on Extended Ad hoc On-Demand Distance Vector (EAODV) routing protocol based on Distributed Minimum Transmission Multicast Routing (DMTMR). One chapter is dedicated to OCDMA and its future application and another chapter covers development of Home Automation System using SWN.

Download or read book Vibration Analysis and Control in Mechanical Structures and Wind Energy Conversion Systems written by Francisco Beltran-Carbajal and published by BoD – Books on Demand. This book was released on 2018-04-18 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on recent and innovative methods on vibration analysis, system identification, and diverse control design methods for both wind energy conversion systems and vibrating systems. Advances on both theoretical and experimental studies about analysis and control of oscillating systems in several engineering disciplines are discussed. Various control devices are synthesized and implemented for vibration attenuation tasks. The book is addressed to researchers and practitioners on the subject, as well as undergraduate and postgraduate students and other experts and newcomers seeking more information about the state of the art, new challenges, innovative solutions, and new trends and developments in these areas. The six chapters of the book cover a wide range of interesting issues related to modeling, vibration control, parameter identification, active vehicle suspensions, tuned vibration absorbers, electronically controlled wind energy conversion systems, and other relevant case studies.

Download or read book Active Control of Noise and Vibration written by Colin Hansen and published by CRC Press. This book was released on 2012-11-02 with total page 1564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrating active control of both sound and vibration, this comprehensive two-volume set combines coverage of fundamental principles with the most recent theoretical and practical developments. The authors explain how to design and implement successful active control systems in practice and detail the pitfalls one must avoid to ensure a reliable and stable system. Extensively revised, updated, and expanded throughout, the second edition reflects the advances that have been made in algorithms, DSP hardware, and applications since the publication of the first edition.

Download or read book Advances in Smart System Technologies written by P. Suresh and published by Springer Nature. This book was released on 2020-08-29 with total page 823 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select peer-reviewed proceedings of the International Conference on Frontiers in Smart Systems Technologies (ICFSST 2019). It focuses on latest research and cutting-edge technologies in smart systems and intelligent autonomous systems with advanced functionality. Comprising topics related to diverse aspects of smart technologies such as high security, reliability, miniaturization, energy consumption, and intelligent data processing, the book contains contributions from academics as well as industry. Given the range of the topics covered, this book will prove useful for students, researchers, and professionals alike.

Download or read book The Journal of the Acoustical Society of America written by Acoustical Society of America and published by . This book was released on 2006 with total page 1222 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Subband Adaptive Filtering written by Kong-Aik Lee and published by John Wiley & Sons. This book was released on 2009-07-06 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Subband adaptive filtering is rapidly becoming one of the most effective techniques for reducing computational complexity and improving the convergence rate of algorithms in adaptive signal processing applications. This book provides an introductory, yet extensive guide on the theory of various subband adaptive filtering techniques. For beginners, the authors discuss the basic principles that underlie the design and implementation of subband adaptive filters. For advanced readers, a comprehensive coverage of recent developments, such as multiband tap–weight adaptation, delayless architectures, and filter–bank design methods for reducing band–edge effects are included. Several analysis techniques and complexity evaluation are also introduced in this book to provide better understanding of subband adaptive filtering. This book bridges the gaps between the mixed–domain natures of subband adaptive filtering techniques and provides enough depth to the material augmented by many MATLAB® functions and examples. Key Features: Acts as a timely introduction for researchers, graduate students and engineers who want to design and deploy subband adaptive filters in their research and applications. Bridges the gaps between two distinct domains: adaptive filter theory and multirate signal processing. Uses a practical approach through MATLAB®-based source programs on the accompanying CD. Includes more than 100 M-files, allowing readers to modify the code for different algorithms and applications and to gain more insight into the theory and concepts of subband adaptive filters. Subband Adaptive Filtering is aimed primarily at practicing engineers, as well as senior undergraduate and graduate students. It will also be of interest to researchers, technical managers, and computer scientists.

Download or read book Design Tools and Methods in Industrial Engineering II written by Caterina Rizzi and published by Springer Nature. This book was released on 2021-12-01 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers original papers reporting on innovative methods and tools in design, modelling, simulation and optimization, and their applications in engineering design, manufacturing and other relevant industrial sectors. Topics span from advances in geometric modelling, applications of virtual reality, innovative strategies for product development and additive manufacturing, human factors and user-centered design, engineering design education and applications of engineering design methods in medical rehabilitation and cultural heritage. Chapters are based on contributions to the Second International Conference on Design Tools and Methods in Industrial Engineering, ADM 2021, held on September 9–10, 2021, in Rome, Italy, and organized by the Italian Association of Design Methods and Tools for Industrial Engineering, and Dipartimento di Ingegneria Meccanica e Aerospaziale of Sapienza Università di Roma, Italy. All in all, this book provides academics and professionals with a timely overview and extensive information on trends and technologies in industrial design and manufacturing.

Download or read book Vehicle Noise and Vibration Refinement written by Xu Wang and published by Elsevier. This book was released on 2010-03-12 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: High standards of noise, vibration and harshness (NVH) performance are expected in vehicle design. Refinement is therefore one of the main engineering/design attributes to be addressed when developing new vehicle models and components.Vehicle noise and vibration refinement provides a review of noise and vibration refinement principles, methods, advanced experimental and modelling techniques and palliative treatments necessary in the process of vehicle design, development and integration in order to meet noise and vibration standards. Case studies from the collective experience of specialists working for major automotive companies are included to form an important reference for engineers practising in the motor industry who seek to overcome the technological challenges faced in developing quieter, more comfortable cars.The reader will be able to develop an in-depth knowledge of the source and transmission mechanisms of noise and vibration in motor vehicles, and a clear understanding of vehicle refinement issues that directly influence a customer's purchasing decision. - Reviews noise and vibration refinement principles, methods and modelling techniques necessary in vehicle design, development and integration in order to meet noise and vibration standards - Outlines objectives driving development and the significance of vehicle noise and vibration refinement whilst documenting definitions of key terms for use in practice - Case studies demonstrate measurement and modelling in industry and illustrate key testing methods including hand sensing and environmental testing

Download or read book Adaptive Filters written by Behrouz Farhang-Boroujeny and published by John Wiley & Sons. This book was released on 2013-04-02 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Adaptive Filters: Theory and Applications has been updated throughout to reflect the latest developments in this field; notably an increased coverage given to the practical applications of the theory to illustrate the much broader range of adaptive filters applications developed in recent years. The book offers an easy to understand approach to the theory and application of adaptive filters by clearly illustrating how the theory explained in the early chapters of the book is modified for the various applications discussed in detail in later chapters. This integrated approach makes the book a valuable resource for graduate students; and the inclusion of more advanced applications including antenna arrays and wireless communications makes it a suitable technical reference for engineers, practitioners and researchers. Key features: • Offers a thorough treatment of the theory of adaptive signal processing; incorporating new material on transform domain, frequency domain, subband adaptive filters, acoustic echo cancellation and active noise control. • Provides an in-depth study of applications which now includes extensive coverage of OFDM, MIMO and smart antennas. • Contains exercises and computer simulation problems at the end of each chapter. • Includes a new companion website hosting MATLAB® simulation programs which complement the theoretical analyses, enabling the reader to gain an in-depth understanding of the behaviours and properties of the various adaptive algorithms.

Download or read book Advances in Intelligent Computing and Communication written by Mihir Narayan Mohanty and published by Springer Nature. This book was released on 2020-01-13 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features high-quality research papers presented at the 2nd International Conference on Intelligent Computing and Advances in Communication (ICAC 2019), held at Siksha ‘O’ Anusandhan Deemed to be University, Bhubaneswar, Odisha, India, in November 2019. Covering a wide variety of topics, including management of clean and smart energy systems and environmental challenges, it is a valuable resource for researchers and practicing engineers working in various fields of renewable energy generation, and clean and smart energy management.