Download or read book Spinning Methods for Carbon Nanotube Fibers written by Anli Wang and published by . This book was released on 2014 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) have excellent properties along the tube axis. Although the material has fantastic properties at nano scale, it has proven difficult to assemble CNTs into macro-scale products that retain these properties. This thesis investigates different methods for spinning short CNTs into continuous fibers. The first part of the thesis concentrates on the study of dry spinning techniques. CNT fibers can be produced from spinnable arrays. It is found that CNT length plays an important role in the strength of CNT fibers. However, long CNT arrays are usually not spinnable. Alternative ways to spin long CNTs into fibers were exploited. One way is to assemble these long CNTs with the aid of liquid. The obtained fiber has high electrical conductivity by using annealed CNTs but low strength. Another way explored is to make a long CNT array spinnable by binding the ends of CNT bundles in the array. Besides dry spinning, wet spinning methods were also applied to spin CNT fibers. One way of wet spinning to produce CNT fibers is through coagulation of CNT dispersions in a polymer bath. Parameters involved in the spinning process and post treatments were studied. A possible mechanism of the coagulation was given. Process of another method is to add CNTs in a polymer solution and wet spin the polymer. Polyvinyl alcohol (PVA) is used as the matrix polymer and several baths were investigated. Addition of CNTs in PVA solution improves strength of the fiber when CNT are well dispersed. Properties of these fibers were dominated by the polymer.

Download or read book Carbon Nanotube Fibres and Yarns written by Menghe Miao and published by Woodhead Publishing. This book was released on 2019-09-14 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube Fibres and Yarns for Smart Textiles: Production, Properties and Applications in Smart Textiles explains the relevance of carbon nanotube science and provides new insights on this emerging, high-performance textile material. Particular emphasis is placed on applications in smart textiles and wearable electronics applications, such as flexible sensors, actuators and energy sources. This collection examines the state-of-the-art in carbon nanotube (CNT) research, providing guidance for anyone who is exploring problems where CNTs may provide design solutions. Finally, the book addresses advances in yarn spinning methods, yarn structures and properties. Drawing on his experience in the textile industry, the book's editor presents academic research in a way that is comprehensible and useful to materials scientists and engineers in practice. Explains how carbon nanotube science can meet the challenging requirements of important and emerging smart textiles and wearable electronics applications Reviews and analyzes key developments on CNT yarn spinning methods, yarn structures and properties, and proposed applications Addresses the potential applications of CNT yarns and nanocomposite fibers

Download or read book Carbon Nanotube Fibers and Ribbons Produced by a Novel Wet spinning Process written by Ryan Cody Capps and published by . This book was released on 2011 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes have exciting potential to provide high performance materials of the future. One of the main challenges is assembling the billions of miles of individual nanotubes in each pound of product nanotube fiber or sheet in such a way that the properties of the individual nanotubes are most effectively utilized. In this study a novel wet fiber spinning method was developed in which carbon nanotubes dispersed in a surfactant are injected into a rotating acid bath which coagulates the dispersion to form a macroscopic fiber. This flocculation method produces highly conducting carbon nanotube fibers and sheets without the need for a polymer binder. The mechanical strength is sufficient for several applications and can be improved by either heat treatment or by incorporation of a polymer in the yarn, and subsequent draw. Poly(Vinyl Alcohol) (PVA)-treated fibers yield outstanding mechanical properties and a toughness that is comparable to spider silk. Other polymers, such as polyvinylpyrrolidone (PVP) also enhance mechanical properties. Inorganic additives, such as platinum, can be incorporated into the fiber matrix to provide multifunctionality.

Download or read book Nanotube Superfiber Materials written by Canh-Dung Tran and published by Elsevier Inc. Chapters. This book was released on 2013-09-16 with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotube (CNT) yarn, a macroscopic structure of CNTs with many potential applications, has attracted increased attention around the world and across many research areas and industrial fields, including materials science, electronics, medical biology and ecology. Spinning CNTs into yarn based on traditional textile spinning principles has demonstrated the potential in many important applications by producing weavable multifunctionalized yarns. Between 1991 and 2010, new manufacturing methods have enabled the production of pure CNT yarns and CNT-based composite yarns called superfiber suitable for weaving, knitting and braiding with continuous improvements. Especially various novel technologies are used to recently produce yarns for electrochemical devices and medical bioengineering. Thus, the studies on assembling individual CNTs into macrostructures of controlled and oriented configurations continue to play an important role in exploiting CNT potential applications.

Download or read book Nanotube Superfiber Materials written by Mark Schulz and published by William Andrew. This book was released on 2013-09-16 with total page 861 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotube Superfiber Materials refers to different forms of macroscale materials with unique properties constructed from carbon nanotubes. These materials include nanotube arrays, ribbons, scrolls, yarn, braid, and sheets. Nanotube materials are in the early stage of development and this is the first dedicated book on the subject. Transitioning from molecules to materials is a breakthrough that will positively impact almost all industries and areas of society. Key properties of superfiber materials are high flexibility and fatigue resistance, high energy absorption, high strength, good electrical conductivity, high maximum current density, reduced skin and proximity effects, high thermal conductivity, lightweight, good field emission, piezoresistive, magnetoresistive, thermoelectric, and other properties. These properties will open up the door to dozens of applications including replacing copper wire for power conduction, EMI shielding, coax cable, carbon biofiber, bullet-proof vests, impact resistant glass, wearable antennas, biomedical microdevices, biosensors, self-sensing composites, supercapacitors, superinductors, hybrid superconductor, reinforced elastomers, nerve scaffolding, energy storage, and many others. The scope of the book covers three main areas: Part I: Processing; Part II: Properties; and Part III: Applications. Processing involves nanotube synthesis and macro scale material formation methods. Properties covers the mechanical, electrical, chemical and other properties of nanotubes and macroscale materials. Different approaches to growing high quality long nanotubes and spinning the nanotubes into yarn are explained in detail. The best ideas are collected from all around the world including commercial approaches. Applications of nanotube superfiber cover a huge field and provides a broad survey of uses. The book gives a broad overview starting from bioelectronics to carbon industrial machines. - First book to explore the production and applications of macro-scale materials made from nano-scale particles - Sets out the processes for producing macro-scale materials from carbon nanotubes, and describes the unique properties of these materials - Potential applications for CNT fiber/yarn include replacing copper wire for power conduction, EMI shielding, coax cable, carbon biofiber, bullet-proof vests, impact resistant glass, wearable antennas, biomedical microdevices, biosensors, self-sensing composites, supercapacitors, superinductors, hybrid superconductor, reinforced elastomers, nerve scaffolding, energy storage, and many others

Download or read book Principles of Polymer Processing written by Zehev Tadmor and published by John Wiley & Sons. This book was released on 2013-12-02 with total page 1004 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly revised edition of the classic text on polymer processing The Second Edition brings the classic text on polymer processing thoroughly up to date with the latest fundamental developments in polymer processing, while retaining the critically acclaimed approach of the First Edition. Readers are provided with the complete panorama of polymer processing, starting with fundamental concepts through the latest current industry practices and future directions. All the chapters have been revised and updated, and four new chapters have been added to introduce the latest developments. Readers familiar with the First Edition will discover a host of new material, including: * Blend and alloy microstructuring * Twin screw-based melting and chaotic mixing mechanisms * Reactive processing * Devolatilization--theory, mechanisms, and industrial practice * Compounding--theory and industrial practice * The increasingly important role of computational fluid mechanics * A systematic approach to machine configuration design The Second Edition expands on the unique approach that distinguishes it from comparative texts. Rather than focus on specific processing methods, the authors assert that polymers have a similar experience in any processing machine and that these experiences can be described by a set of elementary processing steps that prepare the polymer for any of the shaping methods. On the other hand, the authors do emphasize the unique features of particular polymer processing methods and machines, including the particular elementary step and shaping mechanisms and geometrical solutions. Replete with problem sets and a solutions manual for instructors, this textbook is recommended for undergraduate and graduate students in chemical engineering and polymer and materials engineering and science. It will also prove invaluable for industry professionals as a fundamental polymer processing analysis and synthesis reference.

Download or read book Carbon Nanotubes written by Mohamed Berber and published by BoD – Books on Demand. This book was released on 2016-07-20 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows the recent advances of the applications of carbon nanotubes (CNTs), in particular, the polymer functionalized carbon nanotubes. It also includes a comprehensive description of carbon nanotubes' preparation, properties, and characterization. Therefore, we have attempted to provide detailed information about the polymer-carbon nanotube composites. With regard to the unique structure and properties of carbon nanotubes, a series of important findings have been reported. The unique properties of carbon nanotubes, including thermal, mechanical, and electrical properties, after polymer functionalization have been documented in detail. This book comprises 18 chapters. The chapters include different applications of polymer functionalization CNTs, e.g. photovoltaic, biomedical, drug delivery, gene delivery, stem cell therapy, thermal therapy, biological detection and imaging, electroanalytical, energy, supercapacitor, and gas sensor applications.

Download or read book Nanotube Superfiber Materials written by Simon Jestin and published by Elsevier Inc. Chapters. This book was released on 2013-09-16 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in the field of carbon nanotube (CNT)-based wet-spun fibers are described in this chapter. Wet spinning essentially enables a wide variety of polymers to be spun into fibers. It has been used to produce composite fibers composed of polymers loaded with CNTs, and even fibers solely composed of CNTs. Fibers obtained by wet-spinning approaches contain highly aligned CNTs making the fibers suitable for use in a variety of textile, cable and composite applications. Exciting results have been achieved at the laboratory scale. Today it is critical to consider scale-up of production of such superfibers so that applications can be fully validated.

Download or read book Carbon Nanotubes written by Mohammed Rahman and published by BoD – Books on Demand. This book was released on 2018-04-26 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book Carbon Nanotubes - Recent Progress contains a number of recent researches on synthesis, growth, characterization, development, and potential applications on carbon materials especially CNTs in nanoscale. It is a promising novel research from top to bottom that has received a lot of interest in the last few decades. It covers the advanced topics on the physical, chemical, and potential applications of CNTs. Here, the interesting reports on cutting-edge science and technology related to synthesis, morphology, control, hybridization, and prospective applications of CNTs are concluded. This potentially unique work offers various approaches on the R

Download or read book Carbon Nanotube Fiber Spun from Wetted Ribbon written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A fiber of carbon nanotubes was prepared by a wet-spinning method involving drawing carbon nanotubes away from a substantially aligned, supported array of carbon nanotubes to form a ribbon, wetting the ribbon with a liquid, and spinning a fiber from the wetted ribbon. The liquid can be a polymer solution and after forming the fiber, the polymer can be cured. The resulting fiber has a higher tensile strength and higher conductivity compared to dry-spun fibers and to wet-spun fibers prepared by other methods.

Download or read book Synthesis Technology and Applications of Carbon Nanomaterials written by Suraya Abdul Rashid and published by Elsevier. This book was released on 2018-10-10 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesis, Technology and Applications of Carbon Nanomaterials explores the chemical properties of different classes of carbon nanomaterials and their major applications. As carbon nanomaterials are used for a variety of applications due to their versatile properties and characteristics, this book discusses recent advances in synthesis methods, characterization, and applications of 0D -3D dimensional carbon nanomaterials. It is an essential resource for readers focusing on carbon nanomaterials research. - Explores the chemical properties of different classes of carbon nanomaterials and their major applications - Discusses recent advances in synthesis methods, characterization, and applications of 0D -3D dimensional carbon nanomaterials

Download or read book Synthesis and Applications of Nanocarbons written by Jean-Charles Arnault and published by John Wiley & Sons. This book was released on 2020-09-21 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: A crucial overview of the cutting-edge in nanocarbon research and applications In Synthesis and Applications of Nanocarbons, the distinguished authors have set out to discuss fundamental topics, synthetic approaches, materials challenges, and various applications of this rapidly developing technology. Nanocarbons have recently emerged as a promising material for chemical, energy, environmental, and medical applications because of their unique chemical properties and their rich surface chemistries. This book is the latest entry in the Wiley book series Nanocarbon Chemistry and Interfaces and seeks to comprehensively address many of the newly surfacing areas of controversy and development in the field. This book introduces foundational concepts in nanocarbon technology, hybrids, and applications, while also covering the most recent and cutting-edge developments in this area of study. Synthesis and Applications of Nanocarbons addresses new discoveries in the field, including: · Nanodiamonds · Onion-like carbons · Carbon nanotubes · Fullerenes · Carbon dots · Carbon fibers · Graphene · Aerographite This book provides a transversal view of the various nanocarbon materials and hybrids and helps to share knowledge between the communities of each material and hybrid type.

Download or read book Fundamentals of Conjugated Polymer Blends Copolymers and Composites written by Parveen Saini and published by John Wiley & Sons. This book was released on 2015-04-30 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery in 1977, the evolution of conducting polymers has revolutionized modern science and technology. These polymers enjoy a special status in the area of materials science yet they are not as popular among young readers or common people when compared to other materials like metals, paper, plastics, rubber, textiles, ceramics and composites like concrete. Most importantly, much of the available literature in the form of papers, specific review articles and books is targeted either at advanced readers (scientists / technologists / engineers / senior academicians) or for those who are already familiar with the topic (doctoral / postdoctoral scholars). For a beginner or even school / college students, such compilations are bit difficult to access / digest. In fact, they need proper introduction to the topic of conducting polymers including their discovery, preparation, properties, applications and societal impact, using suitable examples and already known principles/knowledge/phenomenon. Further, active participation of readers in terms of "question & answers", "fill-in-the-blanks", "numerical" along with suitable answer key is necessary to maintain the interest and to initiate the "thought process". The readers also need to know about the drawbacks and any hazards of such materials. Therefore, I believe that a comprehensive source on the science / technology of conducting polymers which maintains a link between grass root fundamentals and state-of-the-art R&D is still missing from the open literature.

Download or read book Advances in Filament Yarn Spinning of Textiles and Polymers written by Dong Zhang and published by Elsevier. This book was released on 2014-02-15 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Filament Yarn Spinning of Textiles and Polymers reviews the different types of spinning techniques for synthetic polymer-based fibers, and issues such as their effect on fiber properties, including melt, dry, wet, and gel spinning. Synthetic polymer-based fibers are used in a great variety of consumer and industrial textile applications ranging from clothing to home furnishings to surgical procedures. This book explores how a wide array of spinning techniques can be applied in the textile industry. Part one considers the fundamental structure and properties of fibers that determine their behavior during spinning. The book then discusses developments in technologies for manufacturing synthetic polymer films to produce different fibers with specialized properties. Part two focuses on spinning techniques, including the benefits and limitations of melt spinning and the use of gel spinning to produce high-strength and high-elastic fibers. These chapters focus specifically on developments in bi-component, bi-constituent, and electro-spinning, in particular the fabrication of nanocomposite fibers. The final chapters review integrated composite spinning of yarns and the principles of wet and dry spinning. This collection is an important reference for a wide range of industrial textile technologists, including spinners, fabric and garment manufacturers, and students of textile technology. It is also of great interest for polymer scientists. Reviews the different spinning techniques and issues such as their effect on fiber properties, including melt, dry, wet, and gel spinning Considers the fundamental structure and properties of fibers that determine their behavior during spinning Reviews integrated composite spinning of yarns and the principles of wet and dry spinning

Download or read book Electrospun Nanofibers written by Mehdi Afshari and published by Woodhead Publishing. This book was released on 2016-09-13 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrospun Nanofibers covers advances in the electrospinning process including characterization, testing and modeling of electrospun nanofibers, and electrospinning for particular fiber types and applications. Electrospun Nanofibers offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science. Electrospinning is the most commercially successful process for the production of nanofibers and rising demand is driving research and development in this field. Rapid progress is being made both in terms of the electrospinning process and in the production of nanofibers with superior chemical and physical properties. Electrospinning is becoming more efficient and more specialized in order to produce particular fiber types such as bicomponent and composite fibers, patterned and 3D nanofibers, carbon nanofibers and nanotubes, and nanofibers derived from chitosan. - Provides systematic and comprehensive coverage of the manufacture, properties, and applications of nanofibers - Covers recent developments in nanofibers materials including electrospinning of bicomponent, chitosan, carbon, and conductive fibers - Brings together expertise from academia and industry to provide comprehensive, up-to-date information on nanofiber research and development - Offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science

Download or read book Carbon Nanotubes written by Michael J. O’Connell and published by CRC Press. This book was released on 2018-10-03 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery more than a decade ago, carbon nanotubes (CNTs) have held scientists and engineers in captive fascination, seated on the verge of enormous breakthroughs in areas such as medicine, electronics, and materials science, to name but a few. Taking a broad look at CNTs and the tools used to study them, Carbon Nanotubes: Properties and Applications comprises the efforts of leading nanotube researchers led by Michael O’Connell, protégé of the late father of nanotechnology, Richard Smalley. Each chapter is a self-contained treatise on various aspects of CNT synthesis, characterization, modification, and applications. The book opens with a general introduction to the basic characteristics and the history of CNTs, followed by discussions on synthesis methods and the growth of “peapod” structures. Coverage then moves to electronic properties and band structures of single-wall nanotubes (SWNTs), magnetic properties, Raman spectroscopy of electronic and chemical behavior, and electromechanical properties and applications in NEMS (nanoelectromechanical systems). Turning to applications, the final sections of the book explore mechanical properties of SWNTs spun into fibers, sidewall functionalization in composites, and using SWNTs as tips for scanning probe microscopes. Taking a fresh look at this burgeoning field, Carbon Nanotubes: Properties and Applications points the way toward making CNTs commercially viable.

Download or read book Nanofibers and Nanotechnology in Textiles written by P. Brown and published by Elsevier. This book was released on 2007-10-17 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology is revolutionising the world of materials. This important book reviews its impact in developing a new generation of textile fibers with enhanced functionality and a wide range of applications. The first part of the book reviews nanofiber production, discussing how different fiber types can be produced using electrospinning techniques. Part two analyses the production and properties of carbon nanotubes and polymer nanocomposites and their applications in such areas as aerospace engineering. The third part of the book considers ways of using nanotechnology to improve polymer properties such as thermal stability and dyeability. The final part of the book reviews the use of nanotechnology to modify textile surfaces, including the use of coatings and films, in order to improve hydrophobic, filtration and other properties.Nanofibers and nanotechnology in textiles is a valuable reference in assessing and using a new generation of textile fibers in applications as diverse as tissue and aerospace engineering. - Nanotechnology is revolutionising the world of materials - Learn about a new generation of textile fibers that have a wide range of applications - Examines how to improve polymer properties