Download or read book Spectroscopic Ellipsometry and Reflectometry written by Harland G. Tompkins and published by Wiley-Interscience. This book was released on 1999-03-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: While single wave ellipsometry has been around for years, spectroscopic ellipsometry is fast becoming the method of choice for measuring the thickness and optical properties of thin films. This book provides the first practical introduction to spectroscopic ellipsometry and the related techniques of reflectometry. A guide for practitioners and researchers in a variety of disciplines, it addresses a broad range of applications in physics, chemistry, electrical engineering, and materials science.
Download or read book Spectroscopic Ellipsometry written by Harland G. Tompkins and published by Momentum Press. This book was released on 2015-12-16 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ellipsometry is an experimental technique for determining the thickness and optical properties of thin films. It is ideally suited for films ranging in thickness from sub-nanometer to several microns. Spectroscopic measurements have greatly expanded the capabilities of this technique and introduced its use into all areas where thin films are found: semiconductor devices, flat panel and mobile displays, optical coating stacks, biological and medical coatings, protective layers, and more. While several scholarly books exist on the topic, this book provides a good introduction to the basic theory of the technique and its common applications. The target audience is not the ellipsometry scholar, but process engineers and students of materials science who are experts in their own fields and wish to use ellipsometry to measure thin film properties without becoming an expert in ellipsometry itself.
Download or read book Handbook of Optics Third Edition Volume I Geometrical and Physical Optics Polarized Light Components and Instruments set written by Michael Bass and published by McGraw Hill Professional. This book was released on 2009-10-06 with total page 1251 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most comprehensive and up-to-date optics resource available Prepared under the auspices of the Optical Society of America, the five carefully architected and cross-referenced volumes of the Handbook of Optics, Third Edition, contain everything a student, scientist, or engineer requires to actively work in the field. From the design of complex optical systems to world-class research and development methods, this definitive publication provides unparalleled access to the fundamentals of the discipline and its greatest minds. Individual chapters are written by the world's most renowned experts who explain, illustrate, and solve the entire field of optics. Each volume contains a complete chapter listing for the entire Handbook, extensive chapter glossaries, and a wealth of references. This pioneering work offers unprecedented coverage of optics data, techniques, and applications. Volume I covers geometrical and physical optics, polarized light, components, and instruments.
Download or read book Handbook of Ellipsometry written by Harland Tompkins and published by William Andrew. This book was released on 2005-01-06 with total page 887 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Ellipsometry is a critical foundation text on an increasingly critical subject. Ellipsometry, a measurement technique based on phase and amplitude changes in polarized light, is becoming popular in a widening array of applications because of increasing miniaturization of integrated circuits and breakthroughs in knowledge of biological macromolecules deriving from DNA and protein surface research. Ellipsometry does not contact or damage samples, and is an ideal measurement technique for determining optical and physical properties of materials at the nano scale. With the acceleration of new instruments and applications now occurring, this book provides an essential foundation for the current science and technology of ellipsometry for scientists and engineers in industry and academia at the forefront of nanotechnology developments in instrumentation, integrated circuits, biotechnology, and pharmaceuticals. Divided into four parts, this comprehensive handbook covers the theory of ellipsometry, instrumentation, applications, and emerging areas. Experts in the field contributed to its twelve chapters, covering various aspects of ellipsometry.
Download or read book Spectroscopic Ellipsometry written by Hiroyuki Fujiwara and published by John Wiley & Sons. This book was released on 2007-09-27 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ellipsometry is a powerful tool used for the characterization of thin films and multi-layer semiconductor structures. This book deals with fundamental principles and applications of spectroscopic ellipsometry (SE). Beginning with an overview of SE technologies the text moves on to focus on the data analysis of results obtained from SE, Fundamental data analyses, principles and physical backgrounds and the various materials used in different fields from LSI industry to biotechnology are described. The final chapter describes the latest developments of real-time monitoring and process control which have attracted significant attention in various scientific and industrial fields.
Download or read book Handbook of Deposition Technologies for Films and Coatings written by Rointan Framroze Bunshah and published by William Andrew. This book was released on 1994 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition, edited by the world-renowned Dr. Rointain Bunshah, is an extensive update of the many improvements in deposition technologies, mechanisms, and applications. Considerably more material was added in Plasma Assisted Vapor Deposition processes, as well as Metallurgical Coating Applications.
Download or read book Nanomanufacturing Handbook written by Ahmed Busnaina and published by CRC Press. This book was released on 2017-12-19 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Breakthroughs in nanotechnology have been coming at a rapid pace over the past few years. This was fueled by significant worldwide investments by governments and industry. But if these promising young technologies cannot begin to show commercial viability soon, that funding is in danger of disappearing as investors lose their appetites and the economic and scientific promise of nanotechnology may not be realized. Scrutinizing the barriers to commercial scale-up of nanotechnologies, the Nanomanufacturing Handbook presents a broad survey of the research being done to bring nanotechnology out of the laboratory and into the factory. Current research into nanotechnology focuses on the underlying science, but as this forward-looking handbook points out, the immediate need is for research into scale-up, process robustness, and system integration issues. Taking that message to heart, this book collects cutting-edge research from top experts who examine such topics as surface-programmed assembly, fabrication and applications of single-walled carbon nanotubes (SWNTs) including nanoelectronics, manufacturing nanoelectrical contacts, room-temperature nanoimprint and nanocontact technologies, nanocontacts and switch reliability, defects and surface preparation, and other innovative, application-driven initiatives. In addition to these technical issues, the author provides a survey of the current state of nanomanufacturing in the United States—the first of its kind—and coverage also reaches into patenting nanotechnologies as well as regulatory and societal issues. With timely, authoritative coverage accompanied by numerous illustrations, the Nanomanufacturing Handbook clarifies the current challenges facing industrial-scale nanotechnologies and outlines advanced tools and strategies that will help overcome them.
Download or read book Spectroscopic Ellipsometry for Photovoltaics written by Hiroyuki Fujiwara and published by Springer. This book was released on 2019-01-10 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a basic understanding of spectroscopic ellipsometry, with a focus on characterization methods of a broad range of solar cell materials/devices, from traditional solar cell materials (Si, CuInGaSe2, and CdTe) to more advanced emerging materials (Cu2ZnSnSe4, organics, and hybrid perovskites), fulfilling a critical need in the photovoltaic community. The book describes optical constants of a variety of semiconductor light absorbers, transparent conductive oxides and metals that are vital for the interpretation of solar cell characteristics and device simulations. It is divided into four parts: fundamental principles of ellipsometry; characterization of solar cell materials/structures; ellipsometry applications including optical simulations of solar cell devices and online monitoring of film processing; and the optical constants of solar cell component layers.
Download or read book Handbook of Deposition Technologies for Films and Coatings written by Rointan F. Bunshah and published by William Andrew. This book was released on 1994-12-31 with total page 887 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition, edited by the world-renowned Dr. Rointain Bunshah, is an extensive update of the many improvements in deposition technologies, mechanisms, and applications. Considerably more material was added in Plasma Assisted Vapor Deposition processes, as well as Metallurgical Coating Applications.
Download or read book Handbook of Photomask Manufacturing Technology written by Syed Rizvi and published by CRC Press. This book was released on 2018-10-03 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the semiconductor industry attempts to increase the number of functions that will fit into the smallest space on a chip, it becomes increasingly important for new technologies to keep apace with these demands. Photomask technology is one of the key areas to achieving this goal. Although brief overviews of photomask technology exist in the literature, the Handbook of Photomask Manufacturing Technology is the first in-depth, comprehensive treatment of existing and emerging photomask technologies available. The Handbook of Photomask Manufacturing Technology features contributions from 40 internationally prominent authors from industry, academia, government, national labs, and consortia. These authors discuss conventional masks and their supporting technologies, as well as next-generation, non-optical technologies such as extreme ultraviolet, electron projection, ion projection, and x-ray lithography. The book begins with an overview of the history of photomask development. It then demonstrates the steps involved in designing, producing, testing, inspecting, and repairing photomasks, following the sequences observed in actual production. The text also includes sections on materials used as well as modeling and simulation. Continued refinements in the photomask-making process have ushered in the sub-wavelength era in nanolithography. This invaluable handbook synthesizes these refinements and provides the tools and possibilities necessary to reach the next generation of microfabrication technologies.
Download or read book The Sol Gel Handbook 3 Volume Set written by David Levy and published by John Wiley & Sons. This book was released on 2015-11-02 with total page 1604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive three-volume handbook brings together a review of the current state together with the latest developments in sol-gel technology to put forward new ideas. The first volume, dedicated to synthesis and shaping, gives an in-depth overview of the wet-chemical processes that constitute the core of the sol-gel method and presents the various pathways for the successful synthesis of inorganic and hybrid organic-inorganic materials, bio- and bio-inspired materials, powders, particles and fibers as well as sol-gel derived thin films, coatings and surfaces. The second volume deals with the mechanical, optical, electrical and magnetic properties of sol-gel derived materials and the methods for their characterization such as diffraction methods and nuclear magnetic resonance, infrared and Raman spectroscopies. The third volume concentrates on the various applications in the fields of membrane science, catalysis, energy research, biomaterials science, biomedicine, photonics and electronics.
Download or read book Handbook of Optical Metrology written by Toru Yoshizawa and published by CRC Press. This book was released on 2009-02-25 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of optical metrology offers a wealth of both practical and theoretical accomplishments, and can cite any number of academic papers recording such. However, while several books covering specific areas of optical metrology do exist, until the pages herein were researched, written, and compiled, the field lacked for a comprehensive handbook, one providing an overview of optical metrology that covers practical applications as well as fundamentals. Carefully designed to make information accessible to beginners without sacrificing academic rigor, the Handbook of Optical Metrology: Principles and Applications discusses fundamental principles and techniques before exploring practical applications. With contributions from veterans in the field, as well as from up-and-coming researchers, the Handbook offers 30 substantial and well-referenced chapters. In addition to the introductory matter, forward-thinking descriptions are included in every chapter that make this a valuable reference for all those involved with optical metrology.
Download or read book Epioptics 8 Proceedings Of The 33rd Course Of The International School Of Solid State Physics written by Antonio Cricenti and published by World Scientific. This book was released on 2006-03-20 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the 8th Epioptics Workshop, held at the Ettore Majorana Foundation and Centre for Scientific Culture, Erice, Sicily. The book assesses the capabilities of state-of-the-art optical techniques in elucidating the fundamental electronic and structural properties of semiconductor and metal surfaces, interfaces, thin layers, and layer structures. The contributions consider the usefulness of these techniques for optimization of high quality multilayer samples through feedback control during materials growth and processing. Particular emphasis is placed on the theory of non-linear optics and on dynamical processes through the use of pump-probe techniques together with the search for new optical sources. Some new applications of Scanning Near-field Optical Microscopy to material science and biological samples, dried and in vivo, with the use of different laser sources are also included.
Download or read book Epioptics 8 written by Antonio Cricenti and published by World Scientific. This book was released on 2006 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the 8th Epioptics Workshop, held at the Ettore Majorana Foundation and Centre for Scientific Culture, Erice, Sicily. The book assesses the capabilities of state-of-the-art optical techniques in elucidating the fundamental electronic and structural properties of semiconductor and metal surfaces, interfaces, thin layers, and layer structures. The contributions consider the usefulness of these techniques for optimization of high quality multilayer samples through feedback control during materials growth and processing. Particular emphasis is placed on the theory of non-linear optics and on dynamical processes through the use of pump-probe techniques together with the search for new optical sources. Some new applications of Scanning Near-field Optical Microscopy to material science and biological samples, dried and in vivo, with the use of different laser sources are also included.
Download or read book Ellipsometry at the Nanoscale written by Maria Losurdo and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents and introduces ellipsometry in nanoscience and nanotechnology making a bridge between the classical and nanoscale optical behaviour of materials. It delineates the role of the non-destructive and non-invasive optical diagnostics of ellipsometry in improving science and technology of nanomaterials and related processes by illustrating its exploitation, ranging from fundamental studies of the physics and chemistry of nanostructures to the ultimate goal of turnkey manufacturing control. This book is written for a broad readership: materials scientists, researchers, engineers, as well as students and nanotechnology operators who want to deepen their knowledge about both basics and applications of ellipsometry to nanoscale phenomena. It starts as a general introduction for people curious to enter the fields of ellipsometry and polarimetry applied to nanomaterials and progresses to articles by experts on specific fields that span from plasmonics, optics, to semiconductors and flexible electronics. The core belief reflected in this book is that ellipsometry applied at the nanoscale offers new ways of addressing many current needs. The book also explores forward-looking potential applications.
Download or read book Handbook of Deposition Technologies for Films and Coatings written by Peter M. Martin and published by William Andrew. This book was released on 2009-12-01 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 3e, edited by Peter M. Martin, PNNL 2005 Inventor of the Year, is an extensive update of the many improvements in deposition technologies, mechanisms, and applications. This long-awaited revision includes updated and new chapters on atomic layer deposition, cathodic arc deposition, sculpted thin films, polymer thin films and emerging technologies. Extensive material was added throughout the book, especially in the areas concerned with plasma-assisted vapor deposition processes and metallurgical coating applications.
Download or read book Handbook of Thin Films written by Hari Singh Nalwa and published by Elsevier. This book was released on 2001-11-17 with total page 3436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This five-volume handbook focuses on processing techniques, characterization methods, and physical properties of thin films (thin layers of insulating, conducting, or semiconductor material). The editor has composed five separate, thematic volumes on thin films of metals, semimetals, glasses, ceramics, alloys, organics, diamonds, graphites, porous materials, noncrystalline solids, supramolecules, polymers, copolymers, biopolymers, composites, blends, activated carbons, intermetallics, chalcogenides, dyes, pigments, nanostructured materials, biomaterials, inorganic/polymer composites, organoceramics, metallocenes, disordered systems, liquid crystals, quasicrystals, and layered structures.Thin films is a field of the utmost importance in today's materials science, electrical engineering and applied solid state physics; with both research and industrial applications in microelectronics, computer manufacturing, and physical devices.Advanced, high-performance computers, high-definition TV, digital camcorders, sensitive broadband imaging systems, flat-panel displays, robotic systems, and medical electronics and diagnostics are but a few examples of miniaturized device technologies that depend the utilization of thin film materials. The Handbook of Thin Films Materials is a comprehensive reference focusing on processing techniques, characterization methods, and physical properties of these thin film materials.
