Download or read book Special Issue on Micro and Nano Flows 2014 MNF2014 Biomedical Stream written by Carola S. König and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments in Biomedical Engineering written by Martin M. Black and published by . This book was released on 1972 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Clinical Applications of Magnetic Nanoparticles written by Nguyen TK Thanh and published by CRC Press. This book was released on 2018-02-06 with total page 1137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering the latest information in magnetic nanoparticle (MNP) research, this book builds upon the success of the first volume and provides an updated and comprehensive review, from synthesis, characterization, and biofunctionalization to clinical applications of MNPs, including the diagnosis and treatment of cancers. The book captures some of emerging research area which was not available in the first volume. Good Manufacturing Practices and Commercialization of MNPs are also included. This volume, also written by some of the most qualified experts in the field, incorporates new developments in the literature, and continues to bridge the gaps between the different areas in this field.
Download or read book Complex shaped Metal Nanoparticles written by Tapan K. Sau and published by John Wiley & Sons. This book was released on 2012-08-07 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past few years have witnessed the development of non-spherical metal nanoparticles with complex morphologies, which offer tremendous potential in materials science, chemistry, physics and medicine. Covering all important aspects and techniques of preparation and characterization of metal nanoparticles with controlled morphology and architecture, this book provides a sound overview - from the basics right up to recent developments. Renowned research scientists from all over the world present the existing knowledge in the field, covering theory and modeling, synthesis and properties of these nanomaterials. By emphasizing the underlying concepts and principles in detail, this book enables researchers to fully recognize the future research scope and the application potential of the complex-shaped metal nanoparticles, inspiring further research in this field.
Download or read book Stimuli Responsive Interfaces written by Takeshi Kawai and published by Springer. This book was released on 2016-11-17 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces recent progress in stimuli-responsive interfaces constructed on colloidal materials such as micelles and vesicles and on solid material surfaces. There is discussion of the effect of stimuli such as light, heat, pH, and electric field on changes in the morphology of the molecules at the interfaces and that of colloidal materials. The changes in the properties, such as gelation ability, dispersibility, and emulsification ability, of the resultant bulk materials containing these colloidal materials or those of the solid material are also covered. In addition, design criteria for high sensitivity, quick responsiveness, and high reversibility are presented. In each author’s original system, the correlations between molecular-level responses and bulk functional responses are described as well. This book serves as an excellent guide to designing and fabricating novel, functional, eco-friendly stimuli-responsive interfaces and related materials.
Download or read book Laser Applications written by Monte Ross and published by . This book was released on 1971 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Frontiers in Chemical Sensors written by Guillermo Orellana and published by Springer Science & Business Media. This book was released on 2006-01-27 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: With their similarity to the organs of the most advanced creatures that inhabit the Earth, sensors are regarded as being the “senses of electronics”: arti?cial eyes and ears that are capable of seeing and hearing beyond the range of - man perception; electronic noses and tongues that can recognise odours and ?avours without a lifetime training; touch that is able not only to feel the texture and temperature of the materials but even to discern their chemical compo- tion. Among the world of chemical sensors, optical devices (sometimes termed “optodes”, from the Greek “the optical way”) have reached a prominent place in those areas where the features of light and of the light-matter interaction show their advantage: contactless or long-distance interrogation, detection sensitivity, analyte selectivity, absence of electrical interference or risks, and lack of analyte consumption, to name just a few. The introduction of optical ?bres and integrated optics has added more value to such sensing since now light can be con?ned and readily carried to dif?cult-to-reach locations, higher information density can be transported, indicator dyes can be immobilised at the distal end or the evanescent ?eld for unique chemical and biochemical sensing (including multiplexed and distributed measurements), optical s- sors can now be subject to mass production and novel sensing schemes have been established (interferometric, surface plasmon resonance, ?uorescence energy transfer, supramolecular recognition . . . ).
Download or read book Knowledge and Systems Engineering written by Van Nam Huynh and published by Springer Science & Business Media. This book was released on 2013-10-01 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of Knowledge and Systems Engineering (KSE) has experienced rapid development and inspired many applications in the world of information technology during the last decade. The KSE conference aims at providing an open international forum for presentation, discussion and exchange of the latest advances and challenges in research of the field. These proceedings contain papers presented at the Fifth International Conference on Knowledge and Systems Engineering (KSE 2013), which was held in Hanoi, Vietnam, during 17–19 October, 2013. Besides the main track of contributed papers, which are compiled into the first volume, the conference also featured several special sessions focusing on specific topics of interest as well as included one workshop, of which the papers form the second volume of these proceedings. The book gathers a total of 68 papers describing recent advances and development on various topics including knowledge discovery and data mining, natural language processing, expert systems, intelligent decision making, computational biology, computational modeling, optimization algorithms, and industrial applications.
Download or read book Temperature Sensing written by Ivanka Stanimirović and published by BoD – Books on Demand. This book was released on 2018-07-25 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Temperature is the most often-measured environmental quantity and scientists are continuously improving ways of sensing it. To present their work in the field of temperature sensing, researchers from distant parts of the world have joined their efforts and contributed their ideas according to their interest and engagement. Their articles will give you the opportunity to understand concepts and uses of fiber-optic sensing technology. The optical fiber Mach-Zehnder interferometer for temperature sensing is presented, as well as the optical fiber-distributed temperature sensor and fiber Bragg grating-based sensor. You can learn about tunable diode laser absorption spectroscopy and its various industrial applications. Last but not least, cutting temperature measurements during the machining of aluminum alloys provides us with an insight into the correlation between cutting conditions, mechanical strength of the aluminum alloy, and the cutting temperature measured using the tool-workpiece thermocouple system. The editors hope that the presented contributions will allow both professionals and readers not involved in the immediate field to understand and enjoy the topic.
Download or read book Finite Geometries and Designs written by P. J. Cameron and published by Cambridge University Press. This book was released on 1981-04-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1981, this collection of 33 research papers follows from a conference on the interwoven themes of finite Desarguesian spaces, Steiner systems, coding theory, group theory, block designs, generalized quadrangles, and projective planes. There is a comprehensive introduction, which aims to interest the non-specialist in the subject and which indicates how the contributions fit together. This is a field of research pursued both for its intrinsic interest and its applications. These papers include a number of open problems whose statement requires very little mathematical sophistication.
Download or read book Mechanical Engineering written by Devendra Vashist and published by I. K. International Pvt Ltd. This book was released on 2013-12-30 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains the fundamentals of mechanical engineering for the undergraduate students of all branches of engineering. Coverage includes machine tool and fabrication processes; thermodynamics, IC engines and steam turbines; hydraulic turbines and pumps; refrigeration and air-conditioning; power transmission methods and devices; and stresses, strain, shear force and bending moment diagrams.
Download or read book White House Conference on Aging Washington written by United States. White House Conference on Aging and published by . This book was released on 1960 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Production Technologies in Aerospace Industry written by Berend Denkena and published by Springer Science & Business Media. This book was released on 2013-09-18 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume contains the research results presented at the 4th Machining Innovations Conference, Hannover, September 2013. The topic of the conference are new production technologies in aerospace industry and the focus is on energy efficient machine tools as well as sustainable process planning. The target audience primarily comprises researchers and experts in the field but the book may also be beneficial for graduate students.
