Download or read book Numerical Modelling and Simulation of Metal Processing written by Christof Sommitsch and published by MDPI. This book was released on 2021-08-16 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with metal processing and its numerical modelling and simulation. In total, 21 papers from different distinguished authors have been compiled in this area. Various processes are addressed, including solidification, TIG welding, additive manufacturing, hot and cold rolling, deep drawing, pipe deformation, and galvanizing. Material models are developed at different length scales from atomistic simulation to finite element analysis in order to describe the evolution and behavior of materials during thermal and thermomechanical treatment. Materials under consideration are carbon, Q&T, DP, and stainless steels; ductile iron; and aluminum, nickel-based, and titanium alloys. The developed models and simulations shall help to predict structure evolution, damage, and service behavior of advanced materials.

Download or read book Modelling and Simulation of Sheet Metal Forming Processes written by Marta C. Oliveira and published by MDPI. This book was released on 2020-04-22 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The numerical simulation of sheet metal forming processes has become an indispensable tool for the design of components and their forming processes. This role was attained due to the huge impact in reducing time to market and the cost of developing new components in industries ranging from automotive to packing, as well as enabling an improved understanding of the deformation mechanisms and their interaction with process parameters. Despite being a consolidated tool, its potential for application continues to be discovered with the continuous need to simulate more complex processes, including the integration of the various processes involved in the production of a sheet metal component and the analysis of in-service behavior. The quest for more robust and sustainable processes has also changed its deterministic character into stochastic to be able to consider the scatter in mechanical properties induced by previous manufacturing processes. Faced with these challenges, this Special Issue presents scientific advances in the development of numerical tools that improve the prediction results for conventional forming process, enable the development of new forming processes, or contribute to the integration of several manufacturing processes, highlighting the growing multidisciplinary characteristic of this field.

Download or read book Special Issue of the Manufacturing Engineering Society 2019 SIMES 2019 written by Eva M. Rubio and published by MDPI. This book was released on 2021-01-06 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue of the Manufacturing Engineering Society 2019 (SIMES-2019) has been launched as a joint issue of the journals Applied Sciences and Materials. The 10 contributions published in this Special Issue of Applied Sciences present cutting-edge advances in the field of manufacturing engineering, focusing on production planning, sustainability, metrology, cultural heritage, and materials processing, with experimental and numerical results. It is worth mentioning that the topic “production planning” has attracted a great number of contributions in this journal, due to their applicative approach.

Download or read book Metal Micro forming written by Ken-ichi Manabe and published by MDPI. This book was released on 2020-11-04 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The miniaturization of industrial products is a global trend. Metal forming technology is not only suitable for mass production and excellent in productivity and cost reduction, but it is also a key processing method that is essential for products that utilize advantage of the mechanical and functional properties of metals. However, it is not easy to realize the processing even if the conventional metal forming technology is directly scaled down. This is because the characteristics of materials, processing methods, die and tools, etc., vary greatly with miniaturization. In metal micro forming technology, the size effect of major issues for micro forming have also been clarified academically. New processing methods for metal micro forming have also been developed by introducing new special processing techniques, and it is a new wave of innovation toward high precision, high degree of processing, and high flexibility. To date, several special issues and books have been published on micro-forming technology. This book contains 11 of the latest research results on metal micro forming technology. The editor believes that it will be very useful for understanding the state-of-the-art of metal micro forming technology and for understanding future trends.

Download or read book Advances in Plastic Forming of Metals written by Myoung-Gyu Lee and published by MDPI. This book was released on 2018-10-18 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Advances in Plastic Forming of Metals" that was published in Metals

Download or read book Metal Plasticity and Fatigue at High Temperature written by Denis Benasciutti and published by MDPI. This book was released on 2020-05-20 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: In several industrial fields (such as automotive, steelmaking, aerospace, and fire protection systems) metals need to withstand a combination of cyclic loadings and high temperatures. In this condition, they usually exhibit an amount—more or less pronounced—of plastic deformation, often accompanied by creep or stress-relaxation phenomena. Plastic deformation under the action of cyclic loadings may cause fatigue cracks to appear, eventually leading to failures after a few cycles. In estimating the material strength under such loading conditions, the high-temperature material behavior needs to be considered against cyclic loading and creep, the experimental strength to isothermal/non-isothermal cyclic loadings and, not least of all, the choice and experimental calibration of numerical material models and the selection of the most comprehensive design approach. This book is a series of recent scientific contributions addressing several topics in the field of experimental characterization and physical-based modeling of material behavior and design methods against high-temperature loadings, with emphasis on the correlation between microstructure and strength. Several material types are considered, from stainless steel, aluminum alloys, Ni-based superalloys, spheroidal graphite iron, and copper alloys. The quality of scientific contributions in this book can assist scholars and scientists with their research in the field of metal plasticity, creep, and low-cycle fatigue.

Download or read book Ductile Fracture in Metal Forming written by Kazutake Komori and published by Academic Press. This book was released on 2019-10-11 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ductile Fracture in Metal Forming: Modeling and Simulation examines the current understanding of the mechanics and physics of ductile fracture in metal forming processes while also providing an approach to micromechanical ductile fracture prediction that can be applied to all metal forming processes. Starting with an overview of different ductile fracture scenarios, the book then goes on to explain modeling techniques that predict a range of mechanical phenomena that can lead to ductile fracture. The challenges in creating micromechanical models are addressed alongside methods of applying these models to several common metal forming processes. This book is suitable for researchers working in mechanics of materials, metal forming, mechanical metallurgy, and plasticity. Engineers in R&D industries involved in metal forming such as manufacturing, aerospace, and automation will also find the book very useful. - Explains innovative micromechanical modeling techniques for a variety of material behaviors - Examines how these models can be applied to metal forming processes in practice, including blanking, arrowed cracks in drawing, and surface cracks in upset forging - Provides a thorough examination of both macroscopic and microscopic ductile fracture theory

Download or read book Materials Processing Defects written by M. Predeleanu and published by Elsevier. This book was released on 1995-02-24 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technological field of defects, and more appropriately, avoidance of them, is very current in perhaps all sectors of the manufacturing industry. This is particularly important to reduce/minimize waste everywhere to address lean production procedures. The recent advances in finite plasticity and visioplasticity, damage modelling, instability theories, fracture modelling, computer numerical techniques and process simulation etc. offer new approaches and tools for defect prediction, analyses and guidelines for designing components to be manufactured by traditional and emerging process technologies.This volume contains contributions from well known researchers and experts in the field presenting an up-to-date overview of advances in this area. Subjects covered include: micro- and macro-scale observation of defects; localization and instability analysis; damage modelling and fracture criteria; defect prediction methods; design considerations to avoid defects.

Download or read book International Journal of Vehicle Design written by and published by . This book was released on 2005 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Failure Mechanisms in Alloys written by George A. Pantazopoulos and published by MDPI. This book was released on 2020-03-19 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The era of lean production and excellence in manufacturing, advancing with sustainable development, demands the rational utilization of raw materials and energy resources, adopting cleaner and environmentally-friendly industrial processes. In view of the new industrial revolution, through digital transformation, the exploitation of smart and sophisticated materials systems, the need of minimizing scrap and increasing efficiency, reliability and lifetime and, on the other hand, the pursuit of fuel economy and limitation of carbon footprint, are necessary conditions for the imminent growth in a highly competitive economy. Failure analysis is an interdisciplinary scientific topic, reflecting the opinions and interpretations coming from a systematic evidence-gathering procedure, embracing various important sectors, imparting knowledge, and substantiating improvement practices. The deep understanding of material/component role (e.g., rotating shaft, extrusion die, gas pipeline) and properties will be of central importance for fitness for purpose in certain industrial processes and applications. Finally, it is hoped and strongly believed that the accumulation of additional knowledge in the field of failure mechanisms and the adoption of the principles, philosophy, and deep understanding of failure analysis process approach will strongly promote the learning concept, as a continuously evolving process leading to personal and social progress and prosperity.

Download or read book Advances in Material Forming written by Francisco Chinesta and published by Springer Science & Business Media. This book was released on 2007-04-19 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book groups the main advances in material forming, considering different processes, both conventional and non-conventional. It focuses on polymers, composites and metals, which are analyzed from the state of the art. Special emphasis is devoted to the contributions of the European Scientific Association for Material Forming (ESAFORM) during the last decade and in particular the ones coming from its annual international conference.

Download or read book Statistical and Computational Techniques in Manufacturing written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2012-03-06 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, interest in developing statistical and computational techniques for applied manufacturing engineering has been increased. Today, due to the great complexity of manufacturing engineering and the high number of parameters used, conventional approaches are no longer sufficient. Therefore, in manufacturing, statistical and computational techniques have achieved several applications, namely, modelling and simulation manufacturing processes, optimization manufacturing parameters, monitoring and control, computer-aided process planning, etc. The present book aims to provide recent information on statistical and computational techniques applied in manufacturing engineering. The content is suitable for final undergraduate engineering courses or as a subject on manufacturing at the postgraduate level. This book serves as a useful reference for academics, statistical and computational science researchers, mechanical, manufacturing and industrial engineers, and professionals in industries related to manufacturing engineering.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1979 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Processing and Fabrication of Advanced Materials written by Alan Kin Tak Lau and published by Trans Tech Publications Ltd. This book was released on 2011-11-29 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XX), December 15-18, 2011, Hong Kong

Download or read book Microstructure Evolution in Metal Forming Processes written by J Lin and published by Elsevier. This book was released on 2012-07-09 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monitoring and control of microstructure evolution in metal processing is essential in developing the right properties in a metal. Microstructure evolution in metal forming processes summarises the wealth of recent research on the mechanisms, modelling and control of microstructure evolution during metal forming processes.Part one reviews the general principles involved in understanding and controlling microstructure evolution in metal forming. Techniques for modelling microstructure and optimising processes are explored, along with recrystallisation, grain growth, and severe plastic deformation. Microstructure evolution in the processing of steel is the focus of part two, which reviews the modelling of phase transformations in steel, unified constitutive equations and work hardening in microalloyed steels. Part three examines microstructure evolution in the processing of other metals, including ageing behaviour in the processing of aluminium and microstructure control in processing nickel, titanium and other special alloys.With its distinguished editors and international team of expert contributors, Microstructure evolution in metal forming processes is an invaluable reference tool for metal processors and those using steels and other metals, as well as an essential guide for academics and students involved in fundamental metal research. - Summarises the wealth of recent research on the mechanisms, modelling and control of microstructure evolution during metal forming processes - Comprehensively discusses microstructure evolution in the processing of steel and reviews the modelling of phase transformations in steel, unified constitutive equations and work hardening in microalloyed steels - Examines microstructure evolution in the processing of other materials, including ageing behaviour in the processing of aluminium

Download or read book Advances in Manufacturing Technology XVII 2003 written by Y. Qin and published by John Wiley & Sons. This book was released on 2003-10-24 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Manufacturing Technology XVII continues a well-respected series with the papers presented at the 1st International Conference on Manufacturing Research (ICMR 2003) - incorporating the 19th National Conference on Manufacturing Research (NCMR). This essential text provides a thorough review of all aspects of manufacturing engineering and management and will be of interest to all those involved in this rapidly advancing sphere of mechanical and manufacturing engineering. Topics covered include Machining Processes and Tooling Forming Processes and Tools Advanced Manufacturing Techniques Advanced Manufacturing Systems Design Methods, Processes, and Systems CAD/CAM Testing/Experimentation/Metrology Internet and E-design/Manufacture Virtual Enterprise and Enterprise Integration

Download or read book Modelling of Metal Forming Processes written by J.L. Chenot and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: The physical modelling of metal forming processes has been widely used both in University and in Industry for many years. Relatively simple numerical models, such as the Slab Method and the Upper Bound Method, were first used and many such models are implemented in the industry for practical design or regulation of forming processes. These are also under investigation in the University, mainly for treat models ments which require low cost calculations or very fast answers for on-line integration. More recently, sophisticated numerical methods have been used for the simulation of metal flow during forming operations. Since the early works in 1973 and 1974, mainly in U. K. and U. S. A. , the applications of the finite element method to metal processing have been developed in many laboratories all over the world. Now the numerical approach seems to be widely re cognized as a powerful tool for comprehension oriented studies, for predic ting the main technological parameters, and for the design and the optlmi zation of new forming sequences. There is also a very recent trend for the introduction of physical laws in the thermo-mechanical models, in order to predict the local evolution of internal variable representing the micro structure of the metal. To day more and more practicians of the Industry are asking for compu ter models for design of their forming processes.