Download or read book Boundary Element Methods in Heat Transfer written by Wrobel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat transfer problems in industry are usually of a very complex nature, simultaneously involving different transfer modes such as conduction, convection, radiation and others. Because of this, very few problems can be solved analytically and one generally has to resort to numerical analysis. The boundary element method is a numerical technique which has been receiving growing attention for solving heat transfer problems because of its unique ability to confine the discretization process to the boundaries of the problem region. This allows major reductions in the data preparation and computer effort necessary to solve complex industrial problems. The purpose of this book is to present efficient algorithms used in conjunction with the boundary element method for the solution of steady and transient, linear and non-linear heat transfer problems. It represents the state-of-the-art of boundary element applications in the field of heat transfer, and constitutes essential reading for researchers and practising engineers involved with this important topic.
Download or read book Solving Heat Radiation Problems Using the Boundary Element Method written by Ryszard A. Bialecki and published by . This book was released on 1993 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Boundary Element Method Volume 1 written by L. C. Wrobel and published by John Wiley & Sons. This book was released on 2002-04-22 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The boundary element method (BEM) is a modern numerical techniquewhich has enjoyed increasing popularity over the last two decades,and is now an established alternative to traditional computationalmethods of engineering analysis. The main advantage of the BEM isits unique ability to provide a complete solution in terms ofboundary values only, with substantial savings in modelling effort. This two-volume book set is designed to provide the readers with acomprehensive and up-to-date account of the boundary element methodand its application to solving engineering problems. Each volume isa self-contained book including a substantial amount of materialnot previously covered by other text books on the subject. Volume 1covers applications to heat transfer, acoustics, electrochemistryand fluid mechanics problems, while volume 2 concentrates on solidsand structures, describing applications to elasticity, plasticity,elastodynamics, fracture mechanics and contact analysis. The earlychapters are designed as a teaching text for final yearundergraduate courses. Both volumes reflect the experience of theauthors over a period of more than twenty years of boundary element research. This volume, Applications in Thermo-Fluids and Acoustics, provides acomprehensive presentation of the BEM from fundamentals to advancedengineering applications and encompasses: Steady and transient heat transfer Potential and viscous fluid flows Frequency and time-domain acoustics Corrosion and other electrochemical problems. A unique feature of this book is an in-depth presentation of BEMformulations in all the above fields, including detaileddiscussions of the basic theory, numerical algorithms and practicalengineering applications of the method. Written by an internationally recognised authority in the field,this is essential reading for postgraduates, researchers andpractitioners in civil, mechanical and chemical engineering andapplied mathematics.
Download or read book Boundary Element Methods for Heat Transfer with Phase Change Problems Theory and Application written by S. G. Ahmed and published by Bentham Science Publishers. This book was released on 2022-06-30 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mathematical modelling of free and moving boundary problems are an important topic in engineering, industry, technology and theoretical sciences. These models allow us to make calculations involved in phase change transitions of materials due to heat transfer. Boundary layer applications are widespread in research and industry. Boundary Element Methods for Heat Transfer with Phase Change Problems: Theory and Application equips the reader with information about heat transfer problems occurring during phase changes. The book covers several boundary element methods, including methods for phase changes, fixed and moving domains and new approaches. The contents are rounded off with chapters on numerical results and industrial applications. Key features: - Simple, didactic presentation of boundary layer problems for heat transfer problems - Covers a wide range of boundary element methods - Includes methods for fixed and moving domains - Explains industrial applications of the methods - Includes solutions to numerical problems The book serves as a textbook for students of advanced mathematics and engineering. It is also a handbook for researchers working on numerical analysis, who require a focused volume on boundary element methods for heat transfer applications.
Download or read book Macro to Microscale Heat Transfer written by D. Y. Tzou and published by John Wiley & Sons. This book was released on 2014-09-18 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical processes taking place in micro/nanoscale strongly depend on the material types and can be very complicated. Known approaches include kinetic theory and quantum mechanics, non-equilibrium and irreversible thermodynamics, molecular dynamics, and/or fractal theory and fraction model. Due to innately different physical bases employed, different approaches may involve different physical properties in describing micro/nanoscale heat transport. In addition, the parameters involved in different approaches, may not be mutually inclusive. Macro- to Microscale Heat Transfer: The Lagging Behavior, Second Edition continues the well-received concept of thermal lagging through the revolutionary approach that focuses on the finite times required to complete the various physical processes in micro/nanoscale. Different physical processes in heat/mass transport imply different delay times, which are common regardless of the material type. The delay times, termed phase lags, are characteristics of materials. Therefore the dual-phase-lag model developed is able to describe eleven heat transfer models from macro to nanoscale in the same framework of thermal lagging. Recent extensions included are the lagging behavior in mass transport, as well as the nonlocal behavior in space, bearing the same merit of thermal lagging in time, in shrinking the ultrafast response down to the nanoscale. Key features: Takes a unified approach describing heat and mass transport from macro, micro to nanoscale Compares experimental results for model validation Includes easy to follow mathematical formulation Accompanied by a website hosting supporting material Macro- to Microscale Heat Transfer: The Lagging Behavior, Second Edition is a comprehensive reference for researchers and practitioners, and graduate students in mechanical, aerospace, biological and chemical engineering.
Download or read book Finite Element Simulation of Heat Transfer written by Jean-Michel Bergheau and published by Wiley-ISTE. This book was released on 2008-09-09 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the finite element method applied to the resolution of industrial heat transfer problems. Starting from steady conduction, the method is gradually extended to transient regimes, to traditional non-linearities, and to convective phenomena. Coupled problems involving heat transfer are then presented. Three types of couplings are discussed: coupling through boundary conditions (such as radiative heat transfer in cavities), addition of state variables (such as metallurgical phase change), and coupling through partial differential equations (such as electrical phenomena). A review of the various thermal phenomena is drawn up, which an engineer can simulate. The methods presented will enable the reader to achieve optimal use from finite element software and also to develop new applications.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book First U K National Conference on Heat Transfer written by Sam Stuart and published by Elsevier. This book was released on 2013-10-02 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: First U.K. National Conference on Heat Transfer, Volume 2, documents the proceedings of the conference organized by the U.K. National Committee for Heat Transfer—a joint committee of the Institutions of Chemical and Mechanical Engineers and includes a member nominated by the Heat Transfer Society—held at the University of Leeds, on 3-5 July 1984. It is intended that the Leeds conference will be the first of a series of UK National Conferences which will be held at four-yearly intervals (1984, 1988, 1992 etc). Thus, for people working in the heat transfer field there will be an opportunity to present and discuss their work at a major conference every two years. This volume contains 52 papers that were presented during Sessions 11-20. The papers in Session 11 deal with enhanced heat transfer. Session 12 presents studies on two-phase flow and boiling. Session 13 contains papers on natural convection. Session 14 focuses measurement techniques in heat transfer while Session 15 deals with heat transfer in high temperature systems. The presentations in Session 16 cover heat transfer in combustion systems while those in Session 17 focus on convective heat transfer. Session 18 takes up heat transfer in cross-flow. Session 19 discusses papers on applied heat transfer. Session 20 deals with studies on industrial heat exchangers.
Download or read book Advances in Numerical Heat Transfer Volume 2 written by W. Minkowycz and published by Routledge. This book was released on 2018-12-13 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses the advances in numerical heat transfer modeling by applying high-performance computing resources, striking a balance between generic fundamentals, specific fundamentals, generic applications, and specific applications.
Download or read book Boundary Element Methods in Engineering written by Balkrishna S. Annigeri and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Boundary Element Method (BEM) has become established as an effective tool for the solutions of problems in engineering science. The salient features of the BEM have been well documented in the open literature and therefore will not be elaborated here. The BEM research has progressed rapidly, especially in the past decade and continues to evolve worldwide. This Symposium was organized to provide an international forum for presentation of current research in BEM for linear and nonlinear problems in solid and fluid mechanics and related areas. To this end, papers on the following topics were included: rotary wing aerodynamics, unsteady aerodynamics, design and optimization, elasticity, elasto dynamics and elastoplasticity, fracture mechanics, acoustics, diffusion and wave motion, thermal analysis, mathematical aspects and boundary/finite element coupled methods. A special session was devoted to parallel/vector supercomputing with emphasis on mas sive parallelism. This Symposium was sponsored by United Technologies Research Center (UTRC) , NASA Langley Research Center, and the International Association of Boundary Ele ment Methods (lAB EM) . We thank the UTRC management for their permission to host this Symposium. In particular, we thank Dr. Arthur S. Kesten and Mr. Robert E. Olson for their encouragement and support. We gratefully acknowledge the support of Dr. E. Carson Yates, Jr. of NASA Langley, Prof. Luigi Morino, Dr. Thomas A.
Download or read book Contact Mechanics Using Boundary Elements written by K. W. Man and published by . This book was released on 1994 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Discontinuous Finite Elements in Fluid Dynamics and Heat Transfer written by Ben Q. Li and published by Springer Science & Business Media. This book was released on 2006-06-29 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past several years, significant advances have been made in developing the discontinuous Galerkin finite element method for applications in fluid flow and heat transfer. Certain unique features of the method have made it attractive as an alternative for other popular methods such as finite volume and finite elements in thermal fluids engineering analyses. This book is written as an introductory textbook on the discontinuous finite element method for senior undergraduate and graduate students in the area of thermal science and fluid dynamics. It also can be used as a reference book for researchers and engineers who intend to use the method for research in computational fluid dynamics and heat transfer. A good portion of this book has been used in a course for computational fluid dynamics and heat transfer for senior undergraduate and first year graduate students. It also has been used by some graduate students for self-study of the basics of discontinuous finite elements. This monograph assumes that readers have a basic understanding of thermodynamics, fluid mechanics and heat transfer and some background in numerical analysis. Knowledge of continuous finite elements is not necessary but will be helpful. The book covers the application of the method for the simulation of both macroscopic and micro/nanoscale fluid flow and heat transfer phenomena.
Download or read book Boundary Elements and other Mesh Reduction Methods XLII written by Cheng, A. H-D and published by WIT Press. This book was released on 2019-09-13 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originating from the 42nd conference on Boundary Elements and other Mesh Reduction Methods (BEM/MRM), the research presented in this book consist of high quality papers that report on advances in techniques that reduce or eliminate the type of meshes associated with such methods as finite elements or finite differences.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Acoustic and Elastic Wave Scattering Using Boundary Elements written by J. J. do Rêgo Silva and published by Computational Mechanics. This book was released on 1994 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Radiation Heat Transfer Fourth Edition written by Robert Siegel and published by CRC Press. This book was released on 2001-12-07 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensively revised 4th edition provides an up-to-date, comprehensive single source of information on the important subjects in engineering radiative heat transfer. It presents the subject in a progressive manner that is excellent for classroom use or self-study, and also provides an annotated reference to literature and research in the field. The foundations and methods for treating radiative heat transfer are developed in detail, and the methods are demonstrated and clarified by solving example problems. The examples are especially helpful for self-study. The treatment of spectral band properties of gases has been made current and the methods are described in detail and illustrated with examples. The combination of radiation with conduction and/or convection has been given more emphasis nad has been merged with results for radiation alone that serve as a limiting case; this increases practicality for energy transfer in translucent solids and fluids. A comprehensive catalog of configuration factors on the CD that is included with each book provides over 290 factors in algebraic or graphical form. Homework problems with answers are given in each chapter, and a detailed and carefully worked solution manual is available for instructors.
Download or read book IUTAM IACM IABEM Symposium on Advanced Mathematical and Computational Mechanics Aspects of the Boundary Element Method written by Tadeusz Burczynski and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last two decades the boundary element method has experienced a remarkable evolution. Contemporary concepts and techniques leading to the advancements of capabilities and understanding of the mathematical and computational aspects of the method in mechanics are presented. The special emphasis on theoretical and numerical issues, as well as new formulations and approaches for special and important fields of solid and fluid mechanics are considered. Several important and new mathematical aspects are presented: singularity and hypersingular formulations, regularity, errors and error estimators, adaptive methods, Galerkin formulations, coupling of BEM-FEM and non-deterministic (stochastic and fuzzy) BEM formulations. Novel developments and applications of the boundary element method in various fields of mechanics of solids and fluids are considered: heat conduction, diffusion and radiation, non-linear problems, dynamics and time-depending problems, fracture mechanics, thermoelasticity and poroelasticity, aerodynamics and acoustics, contact problems, biomechanics, optimization and sensitivity analysis problems, ill posed and inverse problems, and identification problems.
