Download or read book Advanced Casting Technologies written by Dr.T.R Vijayaram and published by BoD – Books on Demand. This book was released on 2018-05-02 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Major casting processing advancements have been made in experimental and simulation areas. Newly developed advanced casting technologies allow foundry researchers to explore detailed phenomena associated with new casting process parameters helping to produce defect-free castings with good quality. Moreover, increased computational power allows foundry technologists to simulate advanced casting processes to reduce casting defects. In view of rapid expansion of knowledge and capability in the exciting field of casting technology, it is possible to develop new casting techniques. This book is intended to discuss many casting processing technologies. It is devoted to advanced casting processing technologies like ductile casting production and thermal analysis, casting of metal matrix composites by vortex stir casting technique, aluminum DC casting, evaporative casting process, and so on. This book entitled Advanced Casting Technologies has been organized into seven chapters and categorized into four sections. Section 1 discusses the production of ductile iron casting and thermal analysis. Section 2 depicts aluminum casting. Section 3 describes the casting manufacturing aspects of functionally graded materials and evaporative casting process. Section 4 explains about the vortex stir casting technique to process metal matrix composite castings. All the chapters discussed in detail the processing steps, process parameters involved in the individual casting technique, and also its applications. The goal of the book is to provide details on the recent casting technologies.
Download or read book Ductile Iron Handbook written by Al Alagarsamy and published by . This book was released on 1992 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cast Iron Technology written by Roy Elliott and published by Butterworth-Heinemann. This book was released on 1988-04-18 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cast Iron Technology presents a critical review of the nature of cast irons. It discusses the types of cast iron and the general purpose of cast irons. It also presents the history of the iron founding industry. Some of the topics covered in the book are the description of liquid metal state; preparation of liquid metal; process of melting; description of cupola melting and electric melting methods; control of composition of liquid metal during preparation; description of primary cast iron solidification structures; and thermal analysis of metals to determine its quality. Solidification science and the fundamentals of heat treatment are also discussed. An in-depth analysis of the hot quenching techniques is provided. The graphitization potential of liquid iron is well presented. A chapter is devoted to microstructural features of cast iron. The book can provide useful information to iron smiths, welders, students, and researchers.
Download or read book Advances in the Science and Engineering of Casting Solidification written by Laurentiu Nastac and published by Springer. This book was released on 2016-12-16 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection encompasses the following four areas: (1) Solidification processing: theoretical and experimental investigations of solidification processes including castings solidification, directional solidification of alloys, electromagnetic stirring, ultrasonic cavitation, mechanical vibration, active cooling and heating, powder bed-electron beam melting additive manufacturing, etc. for processing of metals, polymers and composite materials; (2) Microstructure Evolution: theoretical and experimental studies related to microstructure evolution of materials including prediction of solidification-related defects and particle pushing/engulfment aspects; (3) Novel Casting and Molding Processes: modeling and experimental aspects including high pressure die casting, permanent casting, centrifugal casting, low pressure casting, 3D silica sand mold printing, etc.; and (4) Cast Iron: all aspects related to cast iron characterization, computational and analytical modeling, and processing.
Download or read book Solidification and Gravity IV written by A. Roósz and published by Trans Tech Publications Ltd. This book was released on 2006-03-15 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of 4th International Conference on Solidification and Gravity, Miskolc-Lillafüred, Hungary, September 6-9, 2004
Download or read book Microstructure and Properties of Ductile Iron and Compacted Graphite Iron Castings written by Mariusz Holtzer and published by Springer. This book was released on 2015-03-27 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the surface effects at the interface boundary of metal/sand moulds, and their influence on the surface quality, microstructure and mechanical and anticorrosive properties of high-quality cast iron. It explores utilitarian aspects of the production of high-quality cast iron castings, including thin-walled castings of high-quality cast iron alloys, and examines problems related to the determination of moulding sands and reclaim quality, and their influence on castings. Presenting new material, this book takes into account the influence of metal quality, pouring temperature, solidification time, the quality of moulding sand with the reclaim application, as well the binders of moulding sands, on the formation of the degenerated graphite near surface layers. It also employs the latest research methods, such as a wavelength-dispersive spectrometer (WDS) analysis and thermodynamic calculations, which were carried out on the reactions occurring in the study area. Providing a valuable resource to academics and researchers interested in materials science, metal casting and metallurgy, this book is also intended for metal industry professionals.
Download or read book Techno societal 2022 written by Prashant M. Pawar and published by Springer Nature. This book was released on 2023-10-24 with total page 1029 pages. Available in PDF, EPUB and Kindle. Book excerpt: “This book, divided into two volumes, originates from Techno-Societal 2022: the 4th International Conference on Advanced Technologies for Societal Applications, Maharashtra, India. The conference brings together faculty members from various engineering colleges to solve relevant regional problems in India, under the guidance of eminent researchers from various reputed organizations. The focus of Volume - I is on technologies that help develop and improve society, with particular emphasis on sensor and ICT-based technologies for the betterment of people, technologies for agriculture and healthcare, micro and nano technological applications, as well as Artificial Intelligence and Big Data. Volume - II delves into commercially successful rural and agricultural technologies, engineering for rural development, ICT-based societal applications, manufacturing and fabrication processes for societal applications, material science & composites, and sensor, image, and data-driven societal technologies. This conference aims to provide a platform for innovators to share their best practices or products developed to solve specific local problems, which in turn may inspire other researchers to solve similar problems in their regions. Additionally, technologies proposed by expert researchers may find applications in different regions, making it a multidisciplinary platform for reporting innovations at different levels in Science, Engineering, and Technology.”
Download or read book Solidification and Gravity written by and published by . This book was released on 2006 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Thermal Process Modeling Steels written by Cemil Hakan Gur and published by CRC Press. This book was released on 2008-12-22 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Emerging Tool for Pioneering Engineers Co-published by the International Federation of Heat Treatment and Surface Engineering.Thermal processing is a highly precise science that does not easily lend itself to improvements through modeling, as the computations required to attain an accurate prediction of the microstructure and properties of work
Download or read book EPD Congress 2013 written by Michael L. Free and published by John Wiley & Sons. This book was released on 2013-01-24 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This state-of-the-art reference presents papers from one of the largest annual gatherings of extraction specialists from around world, the 2013 Annual Meeting of The Minerals, Metals & Materials Society. Addressing many aspects of extraction and processing metallurgy, this volume covers in three sections modeling of multi-scale phenomena in materials processing; production, refining, and recycling of rare earth metals; and solar cell silicon. Essential reading for scientists, engineers, and metallurgists in the global extractive and process metallurgy industries.
Download or read book Foseco Ferrous Foundryman s Handbook written by John Brown and published by Elsevier. This book was released on 2000-08-01 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Foseco Ferrous Foundryman's Handbook is a practical reference book for all those concerned with making castings in any of the commonly used alloys, by any of the usual moulding methods. International SI units are used throughout, but in almost all cases conversions to the more familiar Metric and Imperial units are given. Wherever possible, Casting Alloy Specifications include equivalent specifications for several countries as well as international specifications. Individual chapters cover the casting of light alloys, copper-based alloys, all types of cast-iron and steel. For each group of alloys, specifications and typical applications are described, together with details of melting practice, metal treatment and casting practice. Sand moulding materials, including green sand and chemically bonded sands are also included.
Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.
Download or read book Casting Processes and Modelling of Metallic Materials written by Zak Abdallah and published by BoD – Books on Demand. This book was released on 2021-02-24 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, Casting Processes and Modelling of Metallic Materials, explores the various casting and modelling activities related to metallic alloy systems. The book provides results of research work conducted by experts from all over the globe to add to the research community in the era of the casting process and modelling. The book was edited by two experts in the field of materials science and modelling, Dr. Abdallah and Dr. Aldoumani, whom both have several publications in peer-reviewed journals, worldwide conferences, and scientific books. The book introduces the casting processes and then discusses the various issues and possible solutions. Over the past years, various models have been proposed and utilized to predict the performance of castings. Some of these models proved to be accurate whereas others failed to predict the casting performance. The strength of any predictive tool depends on the employment of physically meaningful parameters that replicate the real-life conditions. This has been illustrated in the current book with such predictive models and finite element (FE) modelling to illustrate the behaviour of castings in real-life conditions.
Download or read book Castings Practice written by John Campbell and published by Elsevier. This book was released on 2004-04-16 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Each chapter of Professor Cambell's new book Castings Practice will take a look at one of his 10 rules. It is to be expected that the Rules wil one day be taken as an outline or blueprint for an international specification on the methods for making reliable castings.John Cambell has over two decades of experience in the casting industry and is the author of over 40 technical papers and patents. He has become well-known in the foundry industry as the originator of the Cosworth casting process, which is becoming accepted throughout the world as a new production process for the casting of cylinder heads and blocks. He is now Federal Mogul Professor of Casting Technology at the University of Birmingham.* Must-follow rules of castings, from one of the world's leading experts* Companion volume to the renowned book 'Castings' * Accessible and direct, provides essential information for students of metallurgy and foundry professionals alike
Download or read book Castings written by John Campbell and published by Elsevier. This book was released on 2003-04-28 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the key publication for professionals and students in the metallurgy and foundry field. Fully revised and expanded, Castings Second Edition covers the latest developments in the understanding of the role of the liquid metal in controlling the properties of cast materials, and indeed, of all metallic materials that have started in the cast form. Practising foundry engineers, designers, and students will find the revealing insights into the behaviour of castings essential in developing their inderstanding and practice. John Campbell OBE is a leading international figure in the castings industry, with over four decades of experience. He is the originator of the Cosworth Casting Process, the pre-eminent production process for automobile cylinder heads and blocks. He is also co-inventor of both the Baxi Casting Process (now owned by Alcoa) developed in the UK, and the newly emerging Alotech Casting Process in the USA. He is Professor of Casting Technology at the University of Birmingham, UK. - New edition of this internationally respected reference and textbook for engineers and students - Develops understanding of the concepts and practice of casting operations - Castings' is the key work on castings technology and process metallurgy, and an essential resource on contemporary developments and thinking on the new metallurgy of cast alloys - Revised and updated throughout, with new material on subjects including surface turbulence, the new theory of entrainment defects including folded film defects, plus the latest concepts of alloy theory
Download or read book The Microstructure of Superalloys written by Madeleine Durand-Charre and published by Routledge. This book was released on 2017-11-22 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents all the main aspects of the microstructure of nickel-base superalloys, and includes micrographs chosen from among a large range of commercial and academic alloys, from the as-cast product to in-situ components, worn from in-service use. Including more than 100 illustrations, the text explains all the transformation mechanisms involved in the origination (creation) of microstructures during solidification or heat treatments (crystallization paths, segregation, crystal orientation, precipitation, TCP, coarsening and rafting, etc.). It includes up-to-date information and data such as phase diagrams, crystallographic structures, and relationships with functional properties. Nearly 300 references provide a key to further investigation.
Download or read book ISIJ International written by and published by . This book was released on 2002 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt:
