Download or read book Chemical Bonding at Surfaces and Interfaces written by Anders Nilsson and published by Elsevier. This book was released on 2011-08-11 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular surface science has made enormous progress in the past 30 years. The development can be characterized by a revolution in fundamental knowledge obtained from simple model systems and by an explosion in the number of experimental techniques. The last 10 years has seen an equally rapid development of quantum mechanical modeling of surface processes using Density Functional Theory (DFT). Chemical Bonding at Surfaces and Interfaces focuses on phenomena and concepts rather than on experimental or theoretical techniques. The aim is to provide the common basis for describing the interaction of atoms and molecules with surfaces and this to be used very broadly in science and technology. The book begins with an overview of structural information on surface adsorbates and discusses the structure of a number of important chemisorption systems. Chapter 2 describes in detail the chemical bond between atoms or molecules and a metal surface in the observed surface structures. A detailed description of experimental information on the dynamics of bond-formation and bond-breaking at surfaces make up Chapter 3. Followed by an in-depth analysis of aspects of heterogeneous catalysis based on the d-band model. In Chapter 5 adsorption and chemistry on the enormously important Si and Ge semiconductor surfaces are covered. In the remaining two Chapters the book moves on from solid-gas interfaces and looks at solid-liquid interface processes. In the final chapter an overview is given of the environmentally important chemical processes occurring on mineral and oxide surfaces in contact with water and electrolytes. - Gives examples of how modern theoretical DFT techniques can be used to design heterogeneous catalysts - This book suits the rapid introduction of methods and concepts from surface science into a broad range of scientific disciplines where the interaction between a solid and the surrounding gas or liquid phase is an essential component - Shows how insight into chemical bonding at surfaces can be applied to a range of scientific problems in heterogeneous catalysis, electrochemistry, environmental science and semiconductor processing - Provides both the fundamental perspective and an overview of chemical bonding in terms of structure, electronic structure and dynamics of bond rearrangements at surfaces

Download or read book Solid Surfaces Interfaces and Thin Films written by Hans Lüth and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book emphasises both experimental and theoretical aspects of surface, interface and thin film physics. Compa- red to the earlier editions, which bore the title "Surfaces and Interfaces of Solid Materials", the book now places more emphasis on thin films, including also their superconducting and ferromagnetic properties. The present 4th edition thus presents techniques of preparing well-defined solid surfaces and interfaces, fundamental aspects of adsorption and layer growth, as well as basic models for the descripti- on of structural, vibronic and electronic properties of sur- faces, interfaces and thin films. Because of their importan- ce for modern information technology, significant attention is paid to the electronic properties of semiconductor inter- faces and heterostructures. Collective phenomena , such as superconductivity and ferromagnetism, also feature promi- nently. Experimental sections covering essential measurement and preparation techniques are presented in separate panels.

Download or read book Principles and Applications of Tribology written by Bharat Bhushan and published by John Wiley & Sons. This book was released on 2013-02-15 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully updated Second Edition provides the reader with the solid understanding of tribology which is essential to engineers involved in the design of, and ensuring the reliability of, machine parts and systems. It moves from basic theory to practice, examining tribology from the integrated viewpoint of mechanical engineering, mechanics, and materials science. It offers detailed coverage of the mechanisms of material wear, friction, and all of the major lubrication techniques - liquids, solids, and gases - and examines a wide range of both traditional and state-of-the-art applications. For this edition, the author has included updates on friction, wear and lubrication, as well as completely revised material including the latest breakthroughs in tribology at the nano- and micro- level and a revised introduction to nanotechnology. Also included is a new chapter on the emerging field of green tribology and biomimetics.

Download or read book Physics of Surfaces and Interfaces written by Harald Ibach and published by Springer Science & Business Media. This book was released on 2006-11-18 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate-level textbook covers the major developments in surface sciences of recent decades, from experimental tricks and basic techniques to the latest experimental methods and theoretical understanding. It is unique in its attempt to treat the physics of surfaces, thin films and interfaces, surface chemistry, thermodynamics, statistical physics and the physics of the solid/electrolyte interface in an integral manner, rather than in separate compartments. It is designed as a handbook for the researcher as well as a study-text for graduate students. Written explanations are supported by 350 graphs and illustrations.

Download or read book Simple Processes at the Gas Solid Interface written by R.G. Compton and published by Elsevier. This book was released on 1984-07-01 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simple Processes at the Gas-Solid Interface

Download or read book Drops and Bubbles in Contact with Solid Surfaces written by Michele Ferrari and published by CRC Press. This book was released on 2016-04-19 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third volume in a series dedicated to colloids and interfaces, Drops and Bubbles in Contact with Solid Surfaces presents an up-to-date overview of the fundamentals and applications of drops and bubbles and their interaction with solid surfaces. The chapters cover the theoretical and experimental aspects of wetting and wettability, liquid-solid

Download or read book Adsorption by Powders and Porous Solids written by Jean Rouquerol and published by Academic Press. This book was released on 2013-09-06 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The declared objective of this book is to provide an introductory review of the various theoretical and practical aspects of adsorption by powders and porous solids with particular reference to materials of technological importance. The primary aim is to meet the needs of students and non-specialists who are new to surface science or who wish to use the advanced techniques now available for the determination of surface area, pore size and surface characterization. In addition, a critical account is given of recent work on the adsorptive properties of activated carbons, oxides, clays and zeolites. - Provides a comprehensive treatment of adsorption at both the gas/solid interface and the liquid/solid interface - Includes chapters dealing with experimental methodology and the interpretation of adsorption data obtained with porous oxides, carbons and zeolites - Techniques capture the importance of heterogeneous catalysis, chemical engineering and the production of pigments, cements, agrochemicals, and pharmaceuticals

Download or read book Measurement Techniques and Practices of Colloid and Interface Phenomena written by Masahiko Abe and published by Springer. This book was released on 2019-03-30 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a manual of measurement of colloids and interfaces designed especially for new researchers who have just begun research on these topics. The book is written by active researchers in the field of colloids and interfacial chemistry, based on the practical experience of the authors. In each chapter, the key points of measurement, how to analyze data correctly, points to be careful about, and merits of a particular method are concisely explained from the point of view of the readers. Not only in industries such as cosmetics and pharmaceuticals but also in academic studies of nanotechnology, correct understanding of colloid and interface phenomena is vital because the properties of these items, however small, are affected by the nature of interfaces. This book will be particularly useful for researchers who are not yet fully confident of the measurement techniques that are clearly explained here.

Download or read book Reactions at Solid Surfaces written by Gerhard Ertl and published by John Wiley & Sons. This book was released on 2010-06-17 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanding on the ideas first presented in Gerhard Ertl's acclaimed Baker Lectures at Cornell University, Reactions at Solid Surfaces comprises an authoritative, self-contained, book-length introduction to surface reactions for both professional chemists and students alike. Outlining our present understanding of the fundamental processes underlying reactions at solid surfaces, the book provides the reader with a complete view of how chemistry works at surfaces, and how to understand and probe the dynamics of surface reactions. Comparing traditional surface probes with more modern ones, and bringing together various disciplines in a cohesive manner, Gerhard Ertl's Reactions at Solid Surfaces serves well as a primary text for graduate students in introductory surface science or chemistry, as well as a self-teaching resource for professionals in surface science, chemical engineering, or nanoscience.

Download or read book Thermodynamics of Surfaces and Interfaces written by Gerald H. Meier and published by Cambridge University Press. This book was released on 2014-07-17 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: An accessible yet rigorous discussion, featuring case studies and study problems to illustrate and reinforce key concepts.

Download or read book Theoretical Advancement in Chromatography and Related Separation Techniques written by Francesco Dondi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chromatography and all the related separation techniques are experimental in their origin and justification. However, the spectacular progress made in this area since World War II has given rise to a theoretical underpinning. The present book covers the current status of the research area and places it in perspective with the general concepts of the fields of physical chemistry involved. The ASI lectures/authors -- well known leaders in their fields -- have written presentations at the graduate level, accessible to all those who have a good general background in the thermodynamics and mass transfer theory of phase equilibria. The book will be useful to young scientists and engineers who wish to access the current frontiers in chromatography and other separation sciences.

Download or read book Encyclopedia of Surface and Colloid Science written by P. Somasundaran and published by CRC Press. This book was released on 2006 with total page 1084 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Superlubricity written by Ali Erdemir and published by Elsevier. This book was released on 2007-03-30 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superlubricity is defined as a sliding regime in which friction or resistance to sliding vanishes. It has been shown that energy can be conserved by further reducing/removing friction in moving mechanical systems and this book includes contributions from world-renowned scientists who address some of the most fundamental research issues in overcoming friction. Superlubricity reviews the latest methods and materials in this area of research that are aimed at removing friction in nano-to-micro scale machines and large scale engineering components. Insight is also given into the atomic-scale origins of friction in general and superlubricity while other chapters focus on experimental and practical aspects or impacts of superlubricity that will be very useful for broader industrial community.* Reviews the latest fundamental research in superlubricity today* Presents 'state-of-the-art' methods, materials, and experimental techniques* Latest developments in tribomaterials, coatings, and lubricants providing superlubricity

Download or read book Environmentally Benign Approaches for Pulp Bleaching written by Pratima Bajpai and published by Elsevier. This book was released on 2005-08-05 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulp and paper production has increased globally and will continue to increase in the near future. Approximately 155 millions tons of wood pulp is produced worldwide and about 260 millions is projected for 2010. To cope with the increasing demand, an increase in production and improved environmental performance is needed as the industry is under constant pressure to reduce environmental emissions to air and water. This book gives updated information on environmentally benign approaches for pulp bleaching, which can help solve the problems associated with conventional bleaching technologies.* Main focus is on the environmentally friendly technologies that can help solve some of the problems associated with conventional bleaching technologies* Information given is up-to-date, authoritative and cites the experiences of many mills and pertinent research, which is of interest to those working in the industry or intending to do so* Covers in great depth all the aspects of various bleaching processes including environmental issues

Download or read book Physics and Chemistry of Interfaces written by Hans-Jürgen Butt and published by John Wiley & Sons. This book was released on 2023-02-07 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics and Chemistry of Interfaces Comprehensive textbook on the interdisciplinary field of interface science, fully updated with new content on wetting, spectroscopy, and coatings Physics and Chemistry of Interfaces provides a comprehensive introduction to the field of surface and interface science, focusing on essential concepts rather than specific details, and on intuitive understanding rather than convoluted math. Numerous high-end applications from surface technology, biotechnology, and microelectronics are included to illustrate and help readers easily comprehend basic concepts. The new edition contains an increased number of problems with detailed, worked solutions, making it ideal as a self-study resource. In topic coverage, the highly qualified authors take a balanced approach, discussing advanced interface phenomena in detail while remaining comprehensible. Chapter summaries with the most important equations, facts, and phenomena are included to aid the reader in information retention. A few of the sample topics included in Physics and Chemistry of Interfaces are as follows: Liquid surfaces, covering microscopic picture of a liquid surface, surface tension, the equation of Young and Laplace, and curved liquid surfaces Thermodynamics of interfaces, covering surface excess, internal energy and Helmholtz energy, equilibrium conditions, and interfacial excess energies Charged interfaces and the electric double layer, covering planar surfaces, the Grahame equation, and limitations of the Poisson-Boltzmann theory Surface forces, covering Van der Waals forces between molecules, macroscopic calculations, the Derjaguin approximation, and disjoining pressure Physics and Chemistry of Interfaces is a complete reference on the subject, aimed at advanced students (and their instructors) in physics, material science, chemistry, and engineering. Researchers requiring background knowledge on surface and interface science will also benefit from the accessible yet in-depth coverage of the text.

Download or read book Anisotropic Particle Assemblies written by Ning Wu and published by Elsevier. This book was released on 2018-07-12 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anisotropic Particle Assemblies: Synthesis, Assembly, Modeling, and Applications covers the synthesis, assembly, modeling, and applications of various types of anisotropic particles. Topics such as chemical synthesis and scalable fabrication of colloidal molecules, molecular mimetic self-assembly, directed assembly under external fields, theoretical and numerical multi-scale modeling, anisotropic materials with novel interfacial properties, and the applications of these topics in renewable energy, intelligent micro-machines, and biomedical fields are discussed in depth. Contributors to this book are internationally known experts who have been actively studying each of these subfields for many years.This book is an invaluable reference for researchers and chemical engineers who are working at the intersection of physics, chemistry, chemical engineering, and materials science and engineering. It educates students, trains the next generation of researchers, and stimulates continuous development in this rapidly emerging area for new materials and innovative technologies. - Provides comprehensive coverage on new developments in anisotropic particles - Features chapters written by emerging and leading experts in each of the subfields - Contains information that will appeal to a broad spectrum of professionals, including but not limited to chemical engineers, chemists, physicists, and materials scientists and engineers - Serves as both a reference book for researchers and a textbook for graduate students

Download or read book Solid Surfaces Interfaces and Thin Films written by Hans Lüth and published by Springer. This book was released on 2014-11-05 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book emphasises both experimental and theoretical aspects of surface, interface and thin-film physics. As in previous editions the preparation of surfaces and thin films, their atomic and morphological structure, their vibronic and electronic properties as well as fundamentals of adsorption are treated. Because of their importance in modern information technology and nanostructure research, particular emphasis is paid to electronic surface and interface states, semiconductor space charge layers and heterostructures. A special chapter of the book is devoted to collective phenomena at interfaces and in thin films such as superconductivity and magnetism. The latter topic includes the meanwhile important issues giant magnetoresistance and spin-transfer torque mechanism, both effects being of high interest in information technology. In this new edition, for the first time, the effect of spin-orbit coupling on surface states is treated. In this context the class of the recently detected topological insulators, materials of significant importance for spin electronics, are discussed. Particular emphasis, hereby, is laid on the new type of topologically protected surface states with well-defined spin orientation. Furthermore, some important well established experimental techniques such as X-ray diffraction (XRD) and reflection anisotropy spectroscopy (RAS), which were missing so far in earlier editions, were added in this new 6th edition of the book.