Download or read book Solid State Microbatteries written by James R. Akridge and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Advanced Study Institute on the topic of SOLID STATE MICROBATTERIES is the third and final institute on the general theme of a field of study now termed "SOLID STATE IONICS". The institute was held in Erice, Sicily, Italy, 3 - 15 July 1988. The objective was to assemble in one location individuals from industry and academia expert in the fields of microelectronics and solid state ionics to determine the feasibility of merging a solid state microbattery with microelectronic memory. Solid electrolytes are in principle amenable to vapor deposition, RF or DC sputtering, and other techniques used to fabricate microelectronic components. A solid state microbattery 1 1 mated on the same chip carrier as the chip can provide on board memory backup power. A solid state microbattery assembled from properly selected anode/solid electrolyte/cathode materials could have environmental endurance properties equal or superior to semiconductor memory chips. Lectures covering microelectronics, present state-of-art solid state batteries, new solid electrolyte cathode materials, theoretical and practical techniques for fabrication of new solid electrolytes, and analytical techniques for study of solid electrolytes were covered. Several areas where effort is required for further understanding of materials in pure form and their interactions with other materials at interfacial contact points were identified. Cathode materials for solid state batteries is one particular research area which requires attention. Another is a microscopic model of conduction in vitreous solid electrolytes to enhance the thermodynamic macroscopic Weak ~lectrolyte Iheory (WET).
Download or read book Solid State Batteries Materials Design and Optimization written by Christian Julien and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of solid state ionics is multidisciplinary in nature. Chemists, physicists, electrochimists, and engineers all are involved in the research and development of materials, techniques, and theoretical approaches. This science is one of the great triumphs of the second part of the 20th century. For nearly a century, development of materials for solid-state ionic technology has been restricted. During the last two decades there have been remarkable advances: more materials were discovered, modem technologies were used for characterization and optimization of ionic conduction in solids, trial and error approaches were deserted for defined predictions. During the same period fundamental theories for ion conduction in solids appeared. The large explosion of solid-state ionic material science may be considered to be due to two other influences. The first aspect is related to economy and connected with energy production, storage, and utilization. There are basic problems in industrialized countries from the economical, environmental, political, and technological points of view. The possibility of storing a large amount of utilizable energy in a comparatively small volume would make a number of non-conventional intermittent energy sources of practical convenience and cost. The second aspect is related to huge increase in international relationships between researchers and exchanges of results make considerable progress between scientists; one find many institutes joined in common search programs such as the material science networks organized by EEC in the European countries.
Download or read book Handbook Of Solid State Batteries Second Edition written by Nancy J Dudney and published by World Scientific. This book was released on 2015-07-09 with total page 835 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid-state batteries hold the promise of providing energy storage with high volumetric and gravimetric energy densities at high power densities, yet with far less safety issues relative to those associated with conventional liquid or gel-based lithium-ion batteries. Solid-state batteries are envisioned to be useful for a broad spectrum of energy storage applications, including powering automobiles and portable electronic devices, as well as stationary storage and load-leveling of renewably generated energy. This comprehensive handbook covers a wide range of topics related to solid-state batteries, including advanced enabling characterization techniques, fundamentals of solid-state systems, novel solid electrolyte systems, interfaces, cell-level studies, and three-dimensional architectures. It is directed at physicists, chemists, materials scientists, electrochemists, electrical engineers, battery technologists, and evaluators of present and future generations of power sources. This handbook serves as a reference text providing state-of-the-art reviews on solid-state battery technologies, as well as providing insights into likely future developments in the field. It is extensively annotated with comprehensive references useful to the student and practitioners in the field.
Download or read book All Solid State Thin Film Lithium Ion Batteries written by Alexander Skundin and published by CRC Press. This book was released on 2021-09-08 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive, accessible introduction to modern all-solid-state lithium-ion batteries. All-solid-state thin-film lithium-ion batteries present a special and especially important version of lithium-ion ones. They are intended for battery-powered integrated circuit cards (smart-cards), radio-frequency identifier (RFID) tags, smart watches, implantable medical devices, remote microsensors and transmitters, Internet of Things systems, and various other wireless devices including smart building control and so on. Comprising four chapters the monograph explores and provides: The fundamentals of rechargeable batteries, comparison of lithium-ion batteries with other kinds, features of thin-film batteries. A description of functional materials for all-solid-state thin-film batteries. Various methods for applying functional layers of an all-solid-state thin-film lithium-ion battery. Diagnostics of functional layers of all-solid-state thin-film lithium-ion batteries. The monograph is intended for teachers, researchers, advanced undergraduate students, and post-graduate students of profile faculties of universities, as well as for developers and manufacturers of thin-film lithium-ion batteries.
Download or read book Solid state Ionic Devices written by E. D. Wachsman and published by The Electrochemical Society. This book was released on 1999 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Printed Batteries written by Senentxu Lanceros-Méndez and published by John Wiley & Sons. This book was released on 2018-04-23 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers the first comprehensive account of this interesting and growing research field Printed Batteries: Materials, Technologies and Applications reviews the current state of the art for printed batteries, discussing the different types and materials, and describing the printing techniques. It addresses the main applications that are being developed for printed batteries as well as the major advantages and remaining challenges that exist in this rapidly evolving area of research. It is the first book on printed batteries that seeks to promote a deeper understanding of this increasingly relevant research and application area. It is written in a way so as to interest and motivate readers to tackle the many challenges that lie ahead so that the entire research community can provide the world with a bright, innovative future in the area of printed batteries. Topics covered in Printed Batteries include, Printed Batteries: Definition, Types and Advantages; Printing Techniques for Batteries, Including 3D Printing; Inks Formulation and Properties for Printing Techniques; Rheological Properties for Electrode Slurry; Solid Polymer Electrolytes for Printed Batteries; Printed Battery Design; and Printed Battery Applications. Covers everything readers need to know about the materials and techniques required for printed batteries Informs on the applications for printed batteries and what the benefits are Discusses the challenges that lie ahead as innovators continue with their research Printed Batteries: Materials, Technologies and Applications is a unique and informative book that will appeal to academic researchers, industrial scientists, and engineers working in the areas of sensors, actuators, energy storage, and printed electronics.
Download or read book Encyclopedia of Electrochemical Power Sources written by Jürgen Garche and published by Newnes. This book was released on 2013-05-20 with total page 4532 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Encyclopedia of Electrochemical Power Sources is a truly interdisciplinary reference for those working with batteries, fuel cells, electrolyzers, supercapacitors, and photo-electrochemical cells. With a focus on the environmental and economic impact of electrochemical power sources, this five-volume work consolidates coverage of the field and serves as an entry point to the literature for professionals and students alike. Covers the main types of power sources, including their operating principles, systems, materials, and applications Serves as a primary source of information for electrochemists, materials scientists, energy technologists, and engineers Incorporates nearly 350 articles, with timely coverage of such topics as environmental and sustainability considerations
Download or read book Solid State Ionics written by C. Julien and published by Elsevier. This book was released on 1989-07-01 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years Solid State Ionics and Solid State Microbatteries have attracted considerable interest due to the important role which they may play in the future of microelectronics and eventually in other fields of energy storage. This volume presents papers on the theory, experiments and applications in this field including: Solid state microbatteries; Thin films solid state batteries; Fast ion conduction; Intercalation and lattice dynamics in layered materials; Electrochromes; Solid state diffusion; and Microsensors.
Download or read book Lithium Ion Rechargeable Batteries written by Kazunori Ozawa and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starting out with an introduction to the fundamentals of lithium ion batteries, this book begins by describing in detail the new materials for all four major uses as cathodes, anodes, separators, and electrolytes. It then goes on to address such critical issues as self-discharge and passivation effects, highlighting lithium ion diffusion and its profound effect on a battery's power density, life cycle and safety issues. The monograph concludes with a detailed chapter on lithium ion battery use in hybrid electric vehicles. Invaluable reading for materials scientists, electrochemists, physicists, and those working in the automobile and electrotechnical industries, as well as those working in computer hardware and the semiconductor industry.
Download or read book Handbook of Solid State Electrochemistry written by P. J. Gellings and published by CRC Press. This book was released on 2019-04-24 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Solid State Electrochemistry is a one-stop resource treating the two main areas of solid state electrochemistry: electrochemical properties of solids such as oxides, halides, and cation conductors; and electrochemical kinetics and mechanisms of reactions occurring on solid electrolytes, including gas-phase electrocatalysis. The fund
Download or read book Handbook Of Solid State Batteries And Capacitors written by M Z A Munshi and published by World Scientific. This book was released on 1995-05-11 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid state power sources have developed remarkably in the last three decades owing to improvements in technology and a greater understanding of the underlying basic sciences. In particular, a greater impetus has recently been placed in developing and commercializing small, lightweight, and highly energetic solid state power sources driven by demands from portable consumer electronics, medical technology, sensors, and electric vehicles. This comprehensive handbook features contributions by forerunners in the field of solid state power source technology from universities, research organizations, and industry. It is directed at the physicist, chemist, materials scientist, electrochemist, electrical engineer, science students, battery and capacitor technologists, and evaluators of present and future generations of power sources, as a reference text providing state-of-the-art reviews on solid state battery and capacitor technologies, and also insights into likely future developments in the field. The volume covers a comprehensive series of articles that deal with the fundamental aspects and experimental aspects of solid state power sources, an in-depth discussion on the state of the various technologies, and applications of these technologies. A description of the recent developments on solid state capacitor technology, and a comprehensive list of references in each and every article will help the reader with an encyclopedia of hidden information. The organization of the material has been carefully divided into thirty-one chapters to ensure that the handbook is thoroughly comprehensive and authoritative on the subject for the reader.
Download or read book Introduction to Solid State Ionics written by C. S. Sunandana and published by CRC Press. This book was released on 2015-11-11 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Solid State Ionics: Phenomenology and Applications presents a pedagogical, graduate-level treatment of the science and technology of superionic conductors, also known as fast ion conductors or solid electrolytes. Suitable for physics, materials science, and engineering researchers and students, the text emphasizes basic physics and
Download or read book Solid State Ionics written by and published by . This book was released on 2006 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solid State Ionics Advanced Materials For Emerging Technologies Proceedings Of The 10th Asian Conference written by B V R Chowdari and published by World Scientific. This book was released on 2006-06-07 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of solid state ionics deals with ionically conducting materials in the solid state and numerous devices based on such materials. Solid state ionic materials cover a wide spectrum, ranging from inorganic crystalline and polycrystalline solids, ceramics, glasses, polymers, composites and nano-scale materials. A large number of Scientists in Asia are engaged in research in solid state ionic materials and devices and since 1988. The Asian Society for solid state ionics has played a key role in organizing a series of bi-ennial conferences on solid state ionics in different Asian countries. The contributions in this volume were presented at the 10th conference in the series organized by the Postgraduate Institute of Science (PGIS) and the Faculty of Science, University of Peradeniya, Sri Lanka, which coincided with the 10th Anniversary of the Postgraduate Institute of Science (PGIS). The topics cover solid state ionic materials as well as such devices as solid state batteries, fuel cells, sensors, and electrochromic devices. The aspects covered include theoretical studies and modeling, experimental techniques, materials synthesis and characterization, device fabrication and characterization.
Download or read book 3D Printing for Energy Applications written by Albert Tarancón and published by John Wiley & Sons. This book was released on 2021-03-03 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D PRINTING FOR ENERGY APPLICATIONS Explore current and future perspectives of 3D printing for the fabrication of high value-added complex devices 3D Printing for Energy Applications delivers an insightful and cutting-edge exploration of the applications of 3D printing to the fabrication of complex devices in the energy sector. The book covers aspects related to additive manufacturing of functional materials with applicability in the energy sector. It reviews both the technology of printable materials and 3D printing strategies itself, and its use in energy devices or systems. Split into three sections, the book covers the 3D printing of functional materials before delving into the 3D printing of energy devices. It closes with printing challenges in the production of complex objects. It also presents an interesting perspective on the future of 3D printing of complex devices. Readers will also benefit from the inclusion of: A thorough introduction to 3D printing of functional materials, including metals, ceramics, and composites An exploration of 3D printing challenges for production of complex objects, including computational design, multimaterials, tailoring AM components, and volumetric additive manufacturing Practical discussions of 3D printing of energy devices, including batteries, supercaps, solar panels, fuel cells, turbomachinery, thermoelectrics, and CCUS Perfect for materials scientists, 3D Printing for Energy Applications will also earn a place in the libraries of graduate students in engineering, chemistry, and material sciences seeking a one-stop reference for current and future perspectives on 3D printing of high value-added complex devices.
Download or read book Fundamentals of Electrochemical Deposition written by Milan Paunovic and published by John Wiley & Sons. This book was released on 2006-08-11 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excellent teaching and resource material . . . it is concise, coherently structured, and easy to read . . . highly recommended for students, engineers, and researchers in all related fields." -Corrosion on the First Edition of Fundamentals of Electrochemical Deposition From computer hardware to automobiles, medical diagnostics to aerospace, electrochemical deposition plays a crucial role in an array of key industries. Fundamentals of Electrochemical Deposition, Second Edition is a comprehensive introduction to one of today's most exciting and rapidly evolving fields of practical knowledge. The most authoritative introduction to the field so far, the book presents detailed coverage of the full range of electrochemical deposition processes and technologies, including: * Metal-solution interphase * Charge transfer across an interphase * Formation of an equilibrium electrode potential * Nucleation and growth of thin films * Kinetics and mechanisms of electrodeposition * Electroless deposition * In situ characterization of deposition processes * Structure and properties of deposits * Multilayered and composite thin films * Interdiffusion in thin film * Applications in the semiconductor industry and the field of medicine This new edition updates the prior edition to address the new developments in the science and its applications, with new chapters on innovative applications of electrochemical deposition in semiconductor technology, magnetism and microelectronics, and medical instrumentation. Added coverage includes such topics as binding energy, nanoclusters, atomic force, and scanning tunneling microscopy.Example problems at the end of chapters and other features clarify and improve understanding of the material. Written by an author team with extensive experience in both industry and academe, this reference and text provides a well-rounded introduction to the field for students, as well as a means for professional chemists, engineers, and technicians to expand and sharpen their skills in using the technology.
Download or read book Energy Harvesting for Autonomous Systems written by Stephen Beeby and published by Artech House. This book was released on 2014-05-14 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique resource provides a detailed understanding of the options for harvesting energy from localized, renewable sources to supply power to autonomous wireless systems. You are introduced to a variety of types of autonomous system and wireless networks and discover the capabilities of existing battery-based solutions, RF solutions, and fuel cells. The book focuses on the most promising harvesting techniques, including solar, kinetic, and thermal energy. You also learn the implications of the energy harvesting techniques on the design of the power management electronics in a system. This in-depth reference discusses each energy harvesting approach in detail, comparing and contrasting its potential in the field.
