Download or read book Solid Sample Analysis written by Ulrich Kurfürst and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The analysis of solid materials by introducing solid test sampies directly into the graphite furnace of an atomic absorption spectrometer must be regarded as a powerful analytical approach. Even if it is - of course - not the "ultimate method". After three decades of development, the instrumentation and the methodology are available to apply solid sampling successfully for the analysis of almost every material. Moreover, several tasks cannot be solved using other analytical methods as neatly as they can using direct solid sampling. The conventional methods work more or less satisfactorily, so why do we sug gest applying solid sampling much more extensively than it is today? To begin with, the features pointed out time and again should be named: Rapidity of the analytical procedure, low susceptibility to analyte loss or contamination, very smallquantities can be analyzed, and expenditure on instrumentation and per sonell is also low. These properties are examined and the necessary conditions are discussed (Chapter 1) as are the analytical tasks (Chapter 6) for which use of this method is advantageous. Other features that are often overlooked are just as important: The simplicity of the analytical procedures allows the analyst to main tain an intimate relationship with the original scientific task that has to be solved with the analysis. Furthermore, the considerable reduction of working place haz ards and pollution by avoiding the use of chemical reagents must nowadays be assessed as a feature as important as the others.
Download or read book Analytical Sample Preparation With Nano and Other High Performance Materials written by Rafael Lucena and published by Elsevier. This book was released on 2021-10-23 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical Sample Preparation With Nano- and Other High-Performance Materials covers advanced sample treatment techniques and the new materials that can be used to boost their performance. The evolution of sample treatment over the last two decades has resulted in the development of new techniques and application of new materials. This is a must-have resource for those studying advanced analytical techniques and the role of high-performance materials in analytical chemistry. The book explains the underlying principles needed to properly understand sample preparation, and also examines the latest materials - including nanomaterials - that result in greater sensitivity and specificity. The book begins with a section devoted to all the various sample preparation techniques and then continues with sections on high-performance sorbents and high-performance solvents. - Combines basic, fundamental principles and advanced concepts and applications for a comprehensive treatment of sample preparation with new materials - Defines nano- and other high-performance materials in this context, including carbon nanoparticles, inorganic nanoparticles, ionic liquids, supramolecular solvents, and more - Includes discussion of all the latest advancements and new findings in both techniques and materials used for proper sample preparation
Download or read book Acceleration and Automation of Solid Sample Treatment written by J.L. Luque García and published by Elsevier. This book was released on 2002-08-09 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide scientists with information about a series of techniques that can be used with a view to facilitating the transformation of the sample to an appropriate state for subsequent detection or quantitation of its components of interest. The techniques dealt with range from the very simple ones (e.g. freeze-drying) to other more complex ones (e.g. glow discharge and laser-induced breakdown sampling). This is the first compilation ever on the subjects of acceleration of solid sample pretreatment; automation of solid sample pretreatment; and integration of solid sample pretreatment and detection. Readers will find here the information required to compare and select the best choice for each sample treatment need and ways to facilitate or automate the most complex and time-consuming step of the analytical process when solid samples are involved.
Download or read book Sample Preparation Techniques in Analytical Chemistry written by Somenath Mitra and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of accurate sample preparation techniques cannot be overstated--meticulous sample preparation is essential. Often overlooked, it is the midway point where the analytes from the sample matrix are transformed so they are suitable for analysis. Even the best analytical techniques cannot rectify problems generated by sloppy sample pretreatment. Devoted entirely to teaching and reinforcing these necessary pretreatment steps, Sample Preparation Techniques in Analytical Chemistry addresses diverse aspects of this important measurement step. These include: * State-of-the-art extraction techniques for organic and inorganic analytes * Sample preparation in biological measurements * Sample pretreatment in microscopy * Surface enhancement as a sample preparation tool in Raman and IR spectroscopy * Sample concentration and clean-up methods * Quality control steps Designed to serve as a text in an undergraduate or graduate level curriculum, Sample Preparation Techniques in Analytical Chemistry also provides an invaluable reference tool for analytical chemists in the chemical, biological, pharmaceutical, environmental, and materials sciences.
Download or read book Handbook of Spectroscopy written by G¿nter Gauglitz and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a straightforward introduction to spectroscopy, showing what it can do and how it does it, together with a clear, integrated and objective account of the wealth of information that can be derived from spectra. The sequence of chapters covers a wide range of the electromagnetic spectrum, and the physical processes involved, from nuclear phenomena to molecular rotation processes. - A day-by-day laboratory guide: its design based on practical knowledge of spectroscopists at universities, industries and research institutes - A well-structured information source containing methods and applications sections framed by sections on general topics - Guides users to a decision about which spectroscopic method and which instrumentation will be the most appropriate to solve their own practical problem - Rapid access to essential information - Correct analysis of a huge number of measured spectra data and smart use of such information sources as databases and spectra libraries
Download or read book Handbook of Solid Phase Microextraction written by Janusz Pawliszyn and published by Elsevier. This book was released on 2011-12-01 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The relatively new technique of solid phase microextraction (SPME) is an important tool to prepare samples both in the lab and on-site. SPME is a "green" technology because it eliminates organic solvents from analytical laboratory and can be used in environmental, food and fragrance, and forensic and drug analysis. This handbook offers a thorough background of the theory and practical implementation of SPME. SPME protocols are presented outlining each stage of the method and providing useful tips and potential pitfalls. In addition, devices and fiber coatings, automated SPME systems, SPME method development, and In Vivo applications are discussed. This handbook is essential for its discussion of the latest SPME developments as well as its in depth information on the history, theory, and practical application of the method. - Practical application of Solid Phase Microextraction methods including detailed steps - Provides history of extraction methods to better understand the process - Suitable for all levels, from beginning student to experienced practitioner
Download or read book Solid Phase Extraction written by Colin F. Poole and published by Elsevier. This book was released on 2019-09-12 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid Phase Extraction thoroughly presents both new and historic techniques for dealing with solid phase extraction. It provides all information laboratory scientists need for choosing and utilizing suitable sample preparation procedures for any kind of sample. In addition, the book showcases the contemporary uses of sample preparation techniques in the most important industrial and academic project environments, including solid-phase Microextraction, molecularly imprinted polymers, magnetic nanoparticles, and more. Written by recognized experts in their respective fields, this one-stop reference is ideal for those who need to know which technique to choose for solid phase extraction. Used in conjunction with a similar release, Liquid Phase Extraction, this book allows users to master this crucial aspect of sample preparation. - Defines the current state-of-the-art in extraction techniques and the methods and procedures for implementing them in laboratory practice - Includes extensive referencing that facilitates the identification of key information - Aimed at both entry-level scientists and those who want to explore new techniques and methods
Download or read book Comprehensive Sampling and Sample Preparation written by Josep M. Bayona and published by Academic Press. This book was released on 2012-12-31 with total page 2998 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Sampling and Sample Preparation is a complete treatment of the theory and methodology of sampling in all physical phases and the theory of sample preparation for all major extraction techniques. It is the perfect starting point for researchers and students to design and implement their experiments and support those experiments with quality-reviewed background information. In its four volumes, fundamentals of sampling and sample preparation are reinforced through broad and detailed sections dealing with Biological and Medical, Environmental and Forensic, and Food and Beverage applications. The contributions are organized to reflect the way in which analytical chemists approach a problem. It is intended for a broad audience of analytical chemists, both educators and practitioners of the art and can assist in the preparation of courses as well in the selection of sampling and sample preparation techniques to address the challenges at hand. Above all, it is designed to be helpful in learning more about these topics, as well as to encourage an interest in sampling and sample preparation by outlining the present practice of the technology and by indicating research opportunities. Sampling and Sample preparation is a large and well-defined field in Analytical Chemistry, relevant for many application areas such as medicine, environmental science, biochemistry, pharmacology, geology, and food science. This work covers all these aspects and will be extremely useful to researchers and students, who can use it as a starting point to design and implement their experiments and for quality-reviewed background information There are limited resources that Educators can use to effectively teach the fundamental aspects of modern sample preparation technology. Comprehensive Sampling and Sample Preparation addresses this need, but focuses on the common principles of new developments in extraction technologies rather than the differences between techniques thus facilitating a more thorough understanding Provides a complete overview of the field. Not only will help to save time, it will also help to make correct assessments and avoid costly mistakes in sampling in the process Sample and sample preparation are integral parts of the analytical process but are often less considered and sometimes even completely disregarded in the available literature. To fill this gap, leading scientists have contributed 130 chapters, organized in 4 volumes, covering all modern aspects of sampling and liquid, solid phase and membrane extractions, as well as the challenges associated with different types of matrices in relevant application areas
Download or read book Solid Sample Analysis with the Mass Spectrometer written by Kellex Corporation and published by . This book was released on 1951 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Sample Preparation for Chromatography written by Serban C. Moldoveanu and published by Elsevier. This book was released on 2021-02-24 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Sample Preparation for Chromatography, Second Edition explains the principles of sample preparation for chromatographic analysis. A variety of procedures are applied to make real-world samples amenable for chromatographic analysis and to improve results. This book's authors discuss each procedure's advantages, disadvantages and their applicability to different types of samples, along with their fit for different types of chromatographic analysis. The book contains numerous literature references and examples of sample preparation for different matrices and new sections on green approaches in sample preparation, progress in automation of sample preparation, non-conventional solvents for LLE (ionic liquids, deep eutectic mixtures, and others), and more. - Presents numerous techniques applied for sample preparation for chromatographic analysis - Provides an up-to-date source of information regarding the progress made in sample preparation for chromatography - Describes examples for specific types of matrices, providing a guide for choosing the appropriate sample preparation method for a given analysis
Download or read book Sample Preparation for Trace Element Analysis written by Zoltan Mester and published by Elsevier. This book was released on 2003-12-16 with total page 1339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the collection of a sample, every analytical chemist will agree that its subsequent preservation and processing are of paramount importance. The availability of high performance analytical instrumentation has not diminished this need for careful selection of appropriate pretreatment methodologies, intelligently designed to synergistically elicit optimum function from these powerful measurement tools. Sample Preparation for Trace Element Analysis is a modern, comprehensive treatise, providing an account of the state-of-the art on the subject matter. The book has been conceived and designed to satisfy the varied needs of the practicing analytical chemist. It is a multi-author work, reflecting the diverse expertise arising from its highly qualified contributors. The first five chapters deal with general issues related to the determination of trace metals in varied matrices, such as sampling, contamination control, reference materials, calibration and detection techniques. The second part of the book deals with extraction and sampling technologies (totaling 15 chapters), providing theoretical and practical hints for the users on how to perform specific extractions. Subsequent chapters overview seven major representative matrices and the sample preparation involved in their characterization. This portion of the book is heavily based on the preceding chapters dealing with extraction technologies. The last ten chapters are dedicated to sample preparation for trace element speciation.- First title to provide comprehensive sample preparation information, dealing specifically with the analysis of samples for trace elements. - The 39 chapters are authored by international leaders of their fields.
Download or read book Trends in Sample Preparation written by Marco Aurélio Zezzi Arruda and published by Nova Publishers. This book was released on 2007 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro Sampling for Solid and Slurries Analytical Methods; Microwave-assisted Procedures for Sample Preparation: Recent Developments; Trends in Sample Preparation using Combustion Techniques; Sample Preparation of Atmospheric Aerosols for Elemental Analysis and Fractionation Studies; Extraction and Pre-Concentration Techniques for Chromatographic Analysis; Strategies in Sample Preparation for Applications in Analytical Electrochemistry In-Line Sample Preparation in Flow Analysis; The Role of Vanguard-Rearguard Strategies in Sample Preparation in Routine AnaIytical Laboratories; Strategies for Sample Preparation Focusing on Biomolecules Determination/Characterization.
Download or read book Solid Sample Analysis written by Ulrich Kurfurst and published by . This book was released on 2014-01-15 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Sample Preparation written by Janusz Pawliszyn and published by Wiley-Blackwell. This book was released on 2011-03-17 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover new keys to solving analytical problems using the Latest sample preparation methods Commonly viewed of as a routine task rather than as an integral component in the analytical process, sample preparation has long been undervalued as a science and underdeveloped as a technology. In an effort to reverse this trend, Handbook of Sample Preparation shows why sample preparation deserves closer scientific scrutiny, and makes a compelling case for colleges and professional laboratories to devote more resources to promote the benefits of its correct application. Handbook of Sample Preparation includes: A solid overview of standard sampling methodologies and their analytical capabilities An introduction of non-traditional sampling technologies, which address the need for solvent-free alternatives, automation, and miniaturization A discussion of the analytical shift toward performing sampling on-site, rather than in the laboratory An examination of various extraction technologies and their applications for different types of matrices A look at how to take advantage of new sampling strategies to streamline laboratory procedures, reduce research costs, and increase overall productivity An excellent primer on the fundamentals of extraction as well as a sound guide on the latest technological upgrades influencing current sampling techniques, this versatile text serves as an important and accessible tool for both students and seasoned practitioners as they seek new avenues for improving the accuracy of their analyses.
Download or read book New Trends in Sample Preparation Techniques for Food Analysis written by Oscar Núñez Burcio and published by Nova Publishers. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, there is a growing need for applications in food control and safety analysis to cope with the analysis of a large number of analytes in a very complex matrix. New analytical procedures are demanding sensitivity, robustness, effectiveness and high resolution within a reduced analysis time. Most of these requirements may be met to a certain extent by the total or partial automation of the conventional analytical methods, including sample preparation or sample pre-treatment coupled on-line to an analytical system. Despite the advances in chromatographic separations and mass spectrometry techniques, sample preparation is still one of the most important parts in any analytical method development and an effective sample preparation is essential for achieving good analytical results. Obviously, ideal sample preparation methods should be fast, accurate, precise and must keep sample integrity. For this reason, and over the last years, considerable efforts have been made to develop modern approaches in sample treatment techniques that enable the reduction of the analysis time without compromising the integrity of the extraction process. The aim of this book is to discuss new trends in sample preparation techniques applied to food analysis, and it will address not only the principles of each technique, but the most relevant applications in food control and safety analysis published over the few last years.
Download or read book Analytical Techniques in Forensic Science written by Rosalind Wolstenholme and published by John Wiley & Sons. This book was released on 2021-01-26 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth text that explores the interface between analytical chemistry and trace evidence Analytical Techniques in Forensic Science is a comprehensive guide written in accessible terms that examines the interface between analytical chemistry and trace evidence in forensic science. With contributions from noted experts on the topic, the text features a detailed introduction analysis in forensic science and then subsequent chapters explore the laboratory techniques grouped by shared operating principles. For each technique, the authors incorporate specific theory, application to forensic analytics, interpretation, forensic specific developments, and illustrative case studies. Forensic techniques covered include UV-Vis and vibrational spectroscopy, mass spectrometry and gas and liquid chromatography. The applications reviewed include evidence types such as fibers, paint, drugs and explosives. The authors highlight data collection, subsequent analysis, what information has been obtained and what this means in the context of a case. The text shows how analytical chemistry and trace evidence can problem solve the nature of much of forensic analysis. This important text: Puts the focus on trace evidence and analytical science Contains case studies that illustrate theory in practice Includes contributions from experts on the topics of instrumentation, theory, and case examples Explores novel and future applications for analytical techniques Written for undergraduate and graduate students in forensic chemistry and forensic practitioners and researchers, Analytical Techniques in Forensic Science offers a text that bridges the gap between introductory textbooks and professional level literature.
Download or read book Sample Preparation Techniques for Chemical Analysis written by Massoud Kaykhaii and published by BoD – Books on Demand. This book was released on 2021-12-22 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite having powerful software, microchips, and solid-state detectors that enable analytical chemists to achieve fast, stable, and accurate signals from their instruments, sample preparation is the most important step in chemical analysis. Issues can arise at this step for various reasons, including a low concentration of analytes, incompatibility of the sample with the analytical instrument, and matrix interferences. This volume discusses the basics of sample preparation and examines modern techniques that can be used by both novice and expert analytical chemists. Chapters review microextraction, surface spectroscopy analysis, and techniques for particle, tissue, and cellular separation.
