Download or read book Solid and Liquid Lubricants for Extreme Environments written by and published by . This book was released on 1984 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Extreme Tribology written by Ahmed Abdelbary and published by CRC Press. This book was released on 2020-01-06 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is an unfamiliar term for many, but is experienced by all. It is the science of friction, wear and lubrication of contacting surfaces in relative motion. The aim of this book is to introduce the fundamentals of tribology as well as its challenges in extreme operating conditions. The book comprises a historical background and an introduction to familiarize both undergraduate and postgraduate readers with such an important topic. It addresses a comprehensive coverage of classical tribology of solid contacts, friction mechanics, wear mechanisms and lubrication technologies. The tribology of polymer composites, MEMS and NEMS are explored. In addition, tribology of automotive components is presented, as are tribological applications in many practical situations.Various test methods used in evaluating wear are reviewed. Diverse techniques applied in predicting wear behavior by mathematical models, FE modeling and ANN approach are discussed. The book reviews key features of extraordinary conditions associated with, but not limited to, harsh environments, severe sliding and poor lubrication challenges. A basic understanding of failure modes in tribological systems is covered. The state-of-the-art research on tribology under these extreme conditions is extensively discussed, which will be of interest to researchers. The book highlights solutions for extreme tribology problems and provides an overview of various factors affecting tribosystems in harsh conditions.
Download or read book Biolubricants written by Jan C.J. Bart and published by Elsevier. This book was released on 2012-12-18 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lubricants are essential in engineering, however more sustainable formulations are needed to avoid adverse effects on the ecosystem. Bio-based lubricant formulations present a promising solution. Biolubricants: Science and technology is a comprehensive, interdisciplinary and timely review of this important subject.Initial chapters address the principles of lubrication, before systematically reviewing fossil and bio-based feedstock resources for biodegradable lubricants. Further chapters describe catalytic, (bio) chemical functionalisation processes for transformation of feedstocks into commercial products, product development, relevant legislation, life cycle assessment, major product groups and specific performance criteria in all major applications. Final chapters consider markets for biolubricants, issues to consider when selecting and using a lubricant, lubricant disposal and future trends.With its distinguished authors, Biolubricants: Science and technology is a comprehensive reference for an industrial audience of oil formulators and lubrication engineers, as well as researchers and academics with an interest in the subject. It provides an essential overview of scientific and technological developments enabling the cost-effective improvement of biolubricants, something that is crucial for the green future of the lubricant industry. - A comprehensive, interdisciplinary and timely review of bio-based lubricant formulations - Addresses the principles of lubrication - Reviews fossil and bio-based feedstock resources for biodegradable lubricants
Download or read book High Performance Solid and Liquid Lubricants written by E. L. McMurtrey and published by William Andrew. This book was released on 1987 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Kirk Othmer Encyclopedia of Chemical Technology Volume 15 written by Kirk-Othmer and published by John Wiley & Sons. This book was released on 2005-10-06 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fifth edition of the Kirk-Othmer Encyclopedia of Chemical Technology builds upon the solid foundation of the previous editions, which have proven to be a mainstay for chemists, biochemists, and engineers at academic, industrial, and government institutions since publication of the first edition in 1949. The new edition includes necessary adjustments and modernisation of the content to reflect changes and developments in chemical technology. Presenting a wide scope of articles on chemical substances, properties, manufacturing, and uses; on industrial processes, unit operations in chemical engineering; and on fundamentals and scientific subjects related to the field. The Encyclopedia describes established technology along with cutting edge topics of interest in the wide field of chemical technology, whilst uniquely providing the necessary perspective and insight into pertinent aspects, rather than merely presenting information. * Set began publication in January 2004 * Over 1,000 articles * More than 600 new or updated articles * 27 volumes
Download or read book Polymers and Additives in Extreme Environments written by Johannes Karl Fink and published by John Wiley & Sons. This book was released on 2021-09-08 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: POLYMERS AND ADDITVES IN EXTREME ENVIRONMENTS Uniquely catalogs polymers and additives for uses in extreme applications such as in high or low pressure, high or low temperature, deep water and other special applications. The book includes chapters on aqueous environments including polymeric membranes for water purification and wastewater treatment; extreme pressure environments such as oils and lubricants for combustion engines as well as materials used for deep drilling such as surfactants, scale inhibitors, foaming agents, defoamers, propellants, fracturing fluids; extreme temperatures is subdivided in high and low temperature applications including gasketing materials, fuel tank sealants, expulsion bladders, fuel cell materials, and on the other hand, cold weather articles and thermoregulatory textiles; electrical applications include solar cell devices, triboelectric generators, fuel cell applications, electrochromic materials and batteries; medical applications include polymers for contact lenses, materials for tissue engineering, sophisticated drug delivery systems; aerospace applications include outer space applications such as low temperature and pressure, also cosmic rays, outgassing, and atomic erosion, as well as materials for electrostactic dissipative coatings and space suits; a final chapter detailing materials that are used in other extreme environments, such as adhesives, and polymeric concrete materials. Audience Materials and polymer scientists working in manufacturing and plastics, civil and mechanical engineers in various industries such as automotive, aircraft, space, marine and shipping, electronics, construction, electrical, etc. will find this book essential. The book will also serve the needs of engineers and specialists who have only a passing contact with polymers and additives in industrial setting need to know more.
Download or read book Lubricants and Lubrication written by Theo Mang and published by John Wiley & Sons. This book was released on 2017-02-02 with total page 1306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the previous edition: "Contains something for everyone involved in lubricant technology." —Chemistry & Industry This completely revised third edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria. A classic reference work, completely revised and updated (approximately 35% new material) focusing on sustainability and the latest developments, technologies and processes of this multi billion dollar business Provides chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, looking not only at the various products but also at specific application engineering criteria All chapters are updated in terms of environmental and operational safety. New guidelines, such as REACH, recycling alternatives and biodegradable base oils are introduced Discusses the integration of micro- and nano-tribology and lubrication systems Reflects the knowledge of Fuchs Petrolub SE, one of the largest companies active in the lubrication business 2 Volumes wileyonlinelibrary.com/ref/lubricants
Download or read book Performance Characterization of Lubricants written by Abhishek Kumar and published by CRC Press. This book was released on 2024-11-14 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text discusses the fundamentals of lubrication science and technology linking the science concepts to engineering practices. It further explores the performance characterization of lubrication systems by utilizing sophisticated experiments and tests and motivates the readers to develop their conclusions and reach solutions based on modern tools and techniques. This book: Presents the principles of surface and lubricant chemistry, and its implementation to devise engineering solutions for various application-based systems. Discusses viscosity index improvers, tribology of green lubricants, and biolubricants from non-edible oils. Highlights 2D nanomaterials lubricants, biogreases, hydrogel and lubricants for extreme temperature and pressure conditions. Explains lubrication for electrical, biomedical, automobile, marine, turbine and aerospace applications. Covers design considerations, formulations, and compositions of lubricants for high-temperature applications in diverse areas. Explores the simulation, computational, and empirical models to characterize, quantify and mitigate the adverse effects of friction. It is primarily written for senior undergraduate and graduate students, and academic researchers in the fields of mechanical engineering, production engineering, industrial engineering, aerospace engineering, and manufacturing engineering.
Download or read book Lubricants and Lubrication 2 Volume Set written by Theo Mang and published by John Wiley & Sons. This book was released on 2017-05-08 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the previous edition: "Contains something for everyone involved in lubricant technology." —Chemistry & Industry This completely revised third edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria. A classic reference work, completely revised and updated (approximately 35% new material) focusing on sustainability and the latest developments, technologies and processes of this multi billion dollar business Provides chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, looking not only at the various products but also at specific application engineering criteria All chapters are updated in terms of environmental and operational safety. New guidelines, such as REACH, recycling alternatives and biodegradable base oils are introduced Discusses the integration of micro- and nano-tribology and lubrication systems Reflects the knowledge of Fuchs Petrolub SE, one of the largest companies active in the lubrication business 2 Volumes wileyonlinelibrary.com/ref/lubricants
Download or read book Tribology and Applications of Self Lubricating Materials written by Emad Omrani and published by CRC Press. This book was released on 2017-11-06 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology and Applications of Self-Lubricating Materials provides insight into the complex mechanisms behind the development of self-lubricating materials, which due to their ability to transfer embedded solid lubricants to the contact surface to decrease wear rate and friction in the absence of an external lubricant, make up an important part of engineering materials used today. This book emphasizes an understanding of the tribological nature of different composites such as metal, polymer, and ceramic matrix composites and discusses the compatibility of these composites with specific lubricants. The book also offers a view of advancements in the development of self-lubricating mechanisms and covers the latest technologies in the field.
Download or read book Ecotribology written by J. Paulo Davim and published by Springer. This book was released on 2015-10-16 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents resent research advances in the area of eco-triobology. In the last years, eco-tribology or environmentally friendly tribology has gained increasing importance in sustainable engineering. Environmentally acceptable tribological practices save resources by optimizing product usage and reducing energy. This book covers current developments in all areas covered by the term eco-tribology, including biomimetics surfaces, control of friction and wear, environmental aspects of lubrication and surface modification techniques as well as tribological aspects of green applications, such wind-power turbines or solar panels.
Download or read book Self Lubricating Composites written by Pradeep L. Menezes and published by Springer Nature. This book was released on 2022-01-03 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: In most tribological applications, liquid or grease based lubricants are used to facilitate the relative motion of solid bodies to minimize friction and wear between interacting surfaces. The challenges for liquid lubricants arise in extreme environmental conditions, such as very high or low temperatures, vacuum, radiation, and extreme contact pressure. At these conditions, solid lubricants may be the alternative choice which can help to decrease friction and wear without incorporating liquid lubricants. Challenges with solid lubricants are to maintain a continuous supply of solid lubricants on the contact surfaces to act as lubricous layer between two sliding surfaces. Such a continuous supply is more easily maintained in the case of liquid lubricants when compared to solid lubricants. The most innovative development to ensure a continuous supply of solid lubricant to the contact surface during sliding is to introduce solid lubricant as reinforcement into the matrix of one of the sliding components. Composite materials are engineered or naturally occurring materials which contain two or more distinct constituents with significantly different chemical, physical and mechanical properties. Composites consist of reinforcement and matrix (metal, polymer and ceramics). Among various reinforcements, recent emerging material, solid lubricant, is found to have many favorable attributes such as good lubrication property. Self‐lubrication is the ability of a material to provide lubrication to the contact surface to decrease friction and wear rate in the absence of an external lubricant by transferring embedded solid lubricants in the composite to the interface. Self-lubricating composites (SLCs) are an important category of engineering materials that are increasingly replacing a number of conventional materials in the automotive, aerospace, and marine industries due to superior tribological properties. In SLCs, solid lubricant materials, including carbonous materials, molybdenum disulfide (MoS2), and hexagonal boron nitride (h-BN) are embedded into the matrices as reinforcements to manufacture a novel material with attractive self-lubricating properties. Several studies have been investigated the tribological properties of self-lubricating materials. This book fills that gap to have a reference book about self-lubricating materials and their properties to help scientists, engineers, and industries. This book discusses mechanisms of self-lubricating materials, self-lubricating properties and the applications for industries. The chapters will be written by authoritative expertise in the field. Additionally, this book will demonstrate fundamental study and most advanced innovations in self-lubricating materials as regards to friction and wear. The chapters also include tribological properties of composites and coatings and some practical applications of self-lubricating materials.
Download or read book NASA Technical Paper written by and published by . This book was released on 1987 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Kirk Othmer Encyclopedia of Chemical Technology Index to Volumes 1 26 written by Kirk-Othmer and published by John Wiley & Sons. This book was released on 2007-03-23 with total page 1085 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fifth edition of the Kirk-Othmer Encyclopedia of Chemical Technology builds upon the solid foundation of the previous editions, which have proven to be a mainstay for chemists, biochemists, and engineers at academic, industrial, and government institutions since publication of the first edition in 1949. The new edition includes necessary adjustments and modernisation of the content to reflect changes and developments in chemical technology. Presenting a wide scope of articles on chemical substances, properties, manufacturing, and uses; on industrial processes, unit operations in chemical engineering; and on fundamentals and scientific subjects related to the field. The Encyclopedia describes established technology along with cutting edge topics of interest in the wide field of chemical technology, whilst uniquely providing the necessary perspective and insight into pertinent aspects, rather than merely presenting information. Set began publication in January 2004 Over 1000 articles More than 600 new or updated articles 27 volumes Reviews from the previous edition: "The most indispensable reference in the English language on all aspects of chemical technology...the best reference of its kind". —Chemical Engineering News, 1992 "Overall, ECT is well written and cleanly edited, and no library claiming to be a useful resource for chemical engineering professionals should be without it." —Nicholas Basta, Chemical Engineering, December 1992
Download or read book Sustainable Material Forming and Joining written by R.Ganesh Narayanan and published by CRC Press. This book was released on 2019-02-06 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of the book is to expose readers to the basics of sustainable material forming and joining technologies, and to discuss the relationship between conventional and sustainable processes. It also provides case studies for sustainable issues in material forming and joining processes, workouts for converting conventional processes to green processes, and highlights the importance of awareness on sustainable and green manufacturing through education. The book will include green and sustainability concepts in material forming like bulk forming and sheet forming emphasizing hot forming, materials development, lubrication, and minimizing defects. Key Features Conceptualizes green and sustainability issues towards efficient material forming and joining Addresses important aspects of sustainable manufacturing by forming operations Presents comparison between traditional and sustainable manufacturing processes Includes practical case studies from industry experts Discusses green and sustainability concepts in material forming like bulk forming and sheet forming emphasizing hot forming, materials development, lubrication, and minimizing defects
Download or read book Chemical Dynamics in Extreme Environments written by Rainer A. Dressler and published by World Scientific. This book was released on 2001 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: As computing power increases, a growing number of macroscopic phenomena are modeled at the molecular level. Consequently, new requirements are generated for the understanding of molecular dynamics in exotic conditions. This book illustrates the importance of detailed chemical dynamics and the role it plays in the phenomenology of a number of extreme environments. Each chapter addresses one or more extreme environments, outlines the associated chemical mechanisms of relevance, and then covers the leading edge science that elucidates the chemical coupling. The chapters exhibit a balance between theory and experiment, gas phase, solid state, and surface dynamics, and geophysical and technical environments. Sample Chapter(s). Chapter 1.1: Introduction (203 KB). Chapter 1.2: Chemistry at High Temperatures and Pressures (99 KB). Chapter 1.3: High Temperature Chemistry in the Atmosphere (82 KB). Chapter 1.4: Low Temperature Chemistry (90 KB). Chapter 1.5: Conclusions (131 KB). Contents: Exploring Chemistry in Extreme Environments: A Driving Force for Innovation (M R Berman); Chemistry Under Extreme Conditions: Cluster Impact Activation (T Raz & R D Levine); Nonequilibrium Chemistry Modeling in Rarefied Hypersonic Flows (I D Boyd); Chemical Dynamics in Chemical Laser Media (M C Heaven); From Elementary Reactions to Complex Combustion Systems (C Schulz et al.); The Gas-Phase Chemical Dynamics Associated with Meteors (R A Dressler & E Murad); Dynamics of Hypervelocity Gas/Surface Collisions (D C Jacobs); Surface Chemistry in the Jovian Magnetosphere Radiation Environment (R E Johnson); Dynamics of Atomic Oxygen Induced Polymer Degradation in Low Earth Orbit (T K Minton & D J Garton); Atomic-Level Properties of Thermal Barrier Coatings: Characterization of MetalOCoCeramic Interface (A Christensen et al.); Molecular Dynamics Simulations of Detonations (C T White et al.). Readership: Scientists engaged in cross-disciplinary work and chemists studying multidisciplinary problems."
Download or read book NASA Tech Briefs written by and published by . This book was released on 2017-10 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
