Download or read book Solid Acoustic Waves And Vibration Theory And Applications written by Li-feng Ge and published by World Scientific. This book was released on 2021-09-23 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid Acoustic Waves and Vibration: Theory and Applications is an exciting new book that takes readers inside a fascinating subject. It is charming that there is a complex and delicate structure in characteristic values, which is revealed by introducing a conceptual system including space operator, space-time variable, reference Poisson's ratio, etc., and developing the analytical models for all limiting cases. The dispersion curves of waves in an elastic plate are determined completely, and a systematic and concise description of the fundamental theory of this subject is given.As MEMS and NEMS technology develops, a number of new issues presents, such as the effects of residual stress, thin-film, air captured in micro-air-gaps and coating on the system, which make the problem complicated and spark debates. Micro-diaphragms are modeled by a plate in tension and mounted on air-spring, a general TDK equation of vibration of plates, including free, forced and damped vibrations, and its solutions are developed. The loading effect of coating is modeled by a mass load; a micro-load theory is presented. This book is a summary of the author's long-term research on electromechanical transducers and these related issues, and they provide an excellent description combining theory and application. The principle of electromechanical transducers, which achieve the conversion between mechanical and electrical energy, occupying a particularly important position in the field of robotics and intelligent machines, is elucidated by introducing the concepts of space-time operator, complex transformation factor, inversion impedance, etc., and an unfiled equivalent circuit is presented. The applications in micromachined capacitive ultrasonic transducers (mCUTs, CMUTs) for biomedical imaging and ultrasonic mass resonators (mUMRs) for biochemical sensing, including plate-type, beam-type, nanowire, bulk-wave, LAW and SAW delay-line ultrasonic resonators are described. This interdisciplinary book will be increasingly attractive as MEMS and NEMS technology develops.
Download or read book Acoustics Waves and Oscillations written by S. N. Sen and published by New Age International. This book was released on 1990 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the theory of waves and oscillations and various applications of acoustics in a logical and simple form. The physical principles have been explained with necessary mathematical formulation and supported by experimental layout wherever possible. Incorporating the classical view point all aspects of acoustic waves and oscillations have been discussed together with detailed elaboration of modern technological applications of sound. A separate chapter on ultrasonics emphasises the importance of this branch of science in fundamental and applied research. The book is expected to present to its readers a comprehensive presentation of the subject-matter and at the same time to guide him for independent thinking on some new lines of investigation.
Download or read book Oscillations Waves and Acoustics written by P. K. Mittal and published by I. K. International Pvt Ltd. This book was released on 2010 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book is meant for the students of undergraduate Science and Engineering courses. This course finds lots of applications, right from Mechanics, Sound, Optics, Solid State Physics, Electrodynamics to Electronics. The chapters cover a vast number of topics like free, forced, damped oscillations, normal modes of vibrations, sound waves, overdamped and ballistic oscillations, LCR circuits etc. In every chapter the topics are dealt with in detail followed by illustrated solved examples and unsolved exercises. Some previous experience with a Calculus course in which differential equations have been discussed is highly desirable. However, the details of the steps in arriving at final solutions are worked out in detail. The book, thus, acts like any textbook and at the same time no help book is needed for further details.
Download or read book Fundamentals of Acoustics written by Lawrence E. Kinsler and published by . This book was released on 1982-01-22 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: A clear treatment of the fundamental principles underlying the generation, transmission, and reception of acoustic waves and their application to numerous fields. Analyzes the various types of vibration of solid bodies and the propagation of sound waves through fluid media. The third edition features discussions of antiresonance concert hall acoustics, detection theory, canonical equations, normal mode propagation in the ocean, and environmental acoustics. Material on absorption, hearing, architectural acoustics, and underwater sound has been expanded and updated.
Download or read book Principles of Vibration and Sound written by Thomas D. Rossing and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: An ideal text for advanced undergraduates, the book provides the foundations needed to understand the acoustics of rooms and musical instruments as well as the basics for scientists and engineers interested in noise and vibration. The new edition contains four new chapters devoted primarily to applications of acoustical principles in everyday life: Microphones and Other Transducers, Sound in Concert Halls and Studios, Sound and Noise Outdoors; and Underwater Sound.
Download or read book Advanced Applications in Acoustics Noise and Vibration written by Frank Fahy and published by CRC Press. This book was released on 2004-08-02 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Applications in Acoustics, Noise and Vibration provides comprehensive and up-to-date overviews of knowledge, applications and research activities in a range of topics that are of current interest in the practice of engineering acoustics and vibration technology. The thirteen chapters are grouped into four parts: signal processing, acoustic modelling, environmental and industrial acoustics, and vibration. Following on from its companion volume Fundamentals of Noise and Vibration this book is based partly on material covered in a selection of elective modules in the second semester of the Masters programme in 'Sound and Vibration Studies' of the Institute of Sound and Vibration Research at the University of Southampton, UK and partly on material presented in the annual ISVR short course 'Advanced Course in Acoustics, Noise and Vibration'.
Download or read book Recent Developments in Surface Acoustic Waves written by David F. Parker and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of surface waves lies at the interface between a number of disci plines - physics, theoretical and applied mechanics, electroacoustics, ap plied mathematics, surface science and seismology. This volume, based on papers delivered at European Mechanics Colloquium 226, reflects this diversity in approach and background, while showing strong links between phenomena arising from different fields. The emphasis is on recent de velopments such as nonlinear and other nonclassical effects,which have great importance for both pure science and for applications such as signal processing, nondestructive evaluation and seismic studies. In recent years there has been considerable progress in the mathe matical treatment of nonlinear effects, of viscoelastic and of more novel constitutive effects which modify the predictions of linear elastic and piezo electric theory for surface acoustic wave (SAW) propagation. A number of these themes serve to group the contents of this volume. Part I contains recent advances in the rigorous mathematical treatment of nonlinearity, together with a paper giving experimental results showing the need for further theoretical development. Part II deals with anisotropic elasticity, showing that even the linear theory presents many possible behaviours, which are still not fully categorized.
Download or read book Fundamentals of Noise and Vibration Analysis for Engineers written by M. P. Norton and published by Cambridge University Press. This book was released on 2003-10-16 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noise and Vibration affects all kinds of engineering structures, and is fast becoming an integral part of engineering courses at universities and colleges around the world. In this second edition, Michael Norton's classic text has been extensively updated to take into account recent developments in the field. Much of the new material has been provided by Denis Karczub, who joins Michael as second author for this edition. This book treats both noise and vibration in a single volume, with particular emphasis on wave-mode duality and interactions between sound waves and solid structures. There are numerous case studies, test cases, and examples for students to work through. The book is primarily intended as a textbook for senior level undergraduate and graduate courses, but is also a valuable reference for researchers and professionals looking to gain an overview of the field.
Download or read book Acoustic Waves in Periodic Structures Metamaterials and Porous Media written by Noé Jiménez and published by Springer Nature. This book was released on 2021-11-03 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book delivers a comprehensive and up-to-date treatment of practical applications of metamaterials, structured media, and conventional porous materials. With increasing levels of urbanization, a growing demand for motorized transport, and inefficient urban planning, environmental noise exposure is rapidly becoming a pressing societal and health concern. Phononic and sonic crystals, acoustic metamaterials, and metasurfaces can revolutionize noise and vibration control and, in many cases, replace traditional porous materials for these applications. In this collection of contributed chapters, a group of international researchers reviews the essentials of acoustic wave propagation in metamaterials and porous absorbers with viscothermal losses, as well as the most recent advances in the design of acoustic metamaterial absorbers. The book features a detailed theoretical introduction describing commonly used modelling techniques such as plane wave expansion, multiple scattering theory, and the transfer matrix method. The following chapters give a detailed consideration of acoustic wave propagation in viscothermal fluids and porous media, and the extension of this theory to non-local models for fluid saturated metamaterials, along with a description of the relevant numerical methods. Finally, the book reviews a range of practical industrial applications, making it especially attractive as a white book targeted at the building, automotive, and aeronautic industries.
Download or read book Theory of Vibrating Systems and Sound written by Irving Bardshar Crandall and published by . This book was released on 1926 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Acoustic fields and waves in solids written by B.A. Auld and published by Рипол Классик. This book was released on 1973 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume One begins with a systematic development of basic concepts (strain, stress, stiffness and compliance, viscous clamping) and coordinate transformations in both tensor and matrix notation. The basic elastic field equations are then written in a form analogous to Maxwell's equations. This analogy is then pursued when analyzing wave propagation in both isotropic and anisotropic solids. Piezoelectricity and bulk wave transducers are treated in the final chapter. Appendixes list slowness diagrams and material properties for various crystalline solids.
Download or read book Understanding Acoustics written by Steven L. Garrett and published by Springer Nature. This book was released on 2020-11-02 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access textbook, like Rayleigh’s classic Theory of Sound, focuses on experiments and on approximation techniques rather than mathematical rigor. The second edition has benefited from comments and corrections provided by many acousticians, in particular those who have used the first edition in undergraduate and graduate courses. For example, phasor notation has been added to clearly distinguish complex variables, and there is a new section on radiation from an unbaffled piston. Drawing on over 40 years of teaching experience at UCLA, the Naval Postgraduate School, and Penn State, the author presents a uniform methodology, based on hydrodynamic fundamentals for analysis of lumped-element systems and wave propagation that can accommodate dissipative mechanisms and geometrically-complex media. Five chapters on vibration and elastic waves highlight modern applications, including viscoelasticity and resonance techniques for measurement of elastic moduli, while introducing analytical techniques and approximation strategies that are revisited in nine subsequent chapters describing all aspects of generation, transmission, scattering, and reception of waves in fluids. Problems integrate multiple concepts, and several include experimental data to provide experience in choosing optimal strategies for extraction of experimental results and their uncertainties. Fundamental physical principles that do not ordinarily appear in other acoustics textbooks, like adiabatic invariance, similitude, the Kramers-Kronig relations, and the equipartition theorem, are shown to provide independent tests of results obtained from numerical solutions, commercial software, and simulations. Thanks to the Veneklasen Research Foundation, this popular textbook is now open access, making the e-book available for free download worldwide. Provides graduate-level treatment of acoustics and vibration suitable for use in courses, for self-study, and as a reference Highlights fundamental physical principles that can provide independent tests of the validity of numerical solutions, commercial software, and computer simulations Demonstrates approximation techniques that greatly simplify the mathematics without a substantial decrease in accuracy Incorporates a hydrodynamic approach to the acoustics of sound in fluids that provides a uniform methodology for analysis of lumped-element systems and wave propagation Emphasizes actual applications as examples of topics explained in the text Includes realistic end-of-chapter problems, some including experimental data, as well as a Solutions Manual for instructors. Features “Talk Like an Acoustician“ boxes to highlight key terms introduced in the text.
Download or read book Engineering Vibroacoustic Analysis written by Stephen A. Hambric and published by John Wiley & Sons. This book was released on 2016-05-02 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes analytical methods (based primarily on classical modal synthesis), the Finite Element Method (FEM), Boundary Element Method (BEM), Statistical Energy Analysis (SEA), Energy Finite Element Analysis (EFEA), Hybrid Methods (FEM-SEA and Transfer Path Analysis), and Wave-Based Methods. The book also includes procedures for designing noise and vibration control treatments, optimizing structures for reduced vibration and noise, and estimating the uncertainties in analysis results. Written by several well-known authors, each chapter includes theoretical formulations, along with practical applications to actual structural-acoustic systems. Readers will learn how to use vibroacoustic analysis methods in product design and development; how to perform transient, frequency (deterministic and random), and statistical vibroacoustic analyses; and how to choose appropriate structural and acoustic computational methods for their applications. The book can be used as a general reference for practicing engineers, or as a text for a technical short course or graduate course.
Download or read book Physical Acoustics in the Solid State written by Bruno Lüthi and published by Springer Science & Business Media. This book was released on 2007-08-14 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Acoustics in the Solid State reviews the modern aspects in the field, including many experimental results, especially those involving ultrasonics. It covers practically all fields of solid-state physics. After a review of the relevant experimental techniques and an introduction to the theory of elasticity, the book details applications in the various fields of condensed matter physics.
Download or read book Theory and Applications of Acoustic Waves written by Sonny Lin and published by . This book was released on 2015-01-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses various approaches of the active research going on in the field of acoustic waves. The concept of acoustic wave is an extensive one; it materializes in a variety of mediums, from solids to plasmas, and at varying length and time scales which range from sub-micrometric layers in microdevices to seismic waves in the Sun's interior. Theoretical attempts lead to a comprehensive understanding of this phenomenon. Such waves are useful in exploring the characteristics of a variety of structures, be it inorganic layers and/or other bio-structures. These waves can also function as a tool to influence matter, from the gentle evaporation of bio-molecules to be evaluated, to the phase conversions inferred by intense shock waves. Furthermore, a whole class of widespread micro tools, inclusive of filters and sensors, depends upon the behavior of these waves propagating in fine layers. The book highlights acoustic waves as manipulative tools and as microdevices.
Download or read book Discrete and Continuum Models for Complex Metamaterials written by Francesco dell'Isola and published by Cambridge University Press. This book was released on 2020-03-12 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together contributions on a diverse range of topics, this text explores the relationship between discrete and continuum mechanics as a tool to model new and complex metamaterials. Providing a comprehensive bibliography and historical review of the field, it covers mechanical, acoustic and pantographic metamaterials, discusses Naive Model Theory and Lagrangian discrete models, and their applications, and presents methods for pantographic structures and variational methods for multidisciplinary modeling and computation. The relationship between discrete and continuous models is discussed from both mathematical and engineering viewpoints, making the text ideal for those interested in the foundation of mechanics and computational applications, and innovative viewpoints on the use of discrete systems to model metamaterials are presented for those who want to go deeper into the field. An ideal text for graduate students and researchers interested in continuum approaches to the study of modern materials, in mechanical engineering, civil engineering, applied mathematics, physics, and materials science.
Download or read book The Theory of Sound written by John William Strutt Baron Rayleigh and published by . This book was released on 1896 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
