Download or read book Soil and Rock Description in Engineering Practice written by David Norbury and published by CRC Press. This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an acknowledged expert, this is a practical guide to the engineering geological description of soils and rocks in the field.

Download or read book Soil and Rock Description in Engineering Practice Second Edition written by David Norbury and published by Whittles. This book was released on 2016-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a revised and updated edition of the highly successful first edition. In the intervening period the procedures used in the description of soils and rocks have continued to develop and evolve and this new edition incorporates changes in the national and international standards, BS 5930:2015 and EN ISO 14688 and 14689 and makes close comparison with US practice in description (ASTM D2488) and classification (ASTM D2487). In addition, changes in definitions, naming procedures, and new terms are all included and explained.

Download or read book Foundations on Rock written by Duncan C. Wyllie and published by CRC Press. This book was released on 2003-09-02 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of the successful Foundations on Rock presents an up-to-date practical reference book describing current engineering practice in the investigation, design and construction of foundations on rock. An extra chapter on Tension Foundations has been included. The methods set out are readily applicable to high rise buildings, bridges,

Download or read book Correlations of Soil and Rock Properties in Geotechnical Engineering written by Jay Ameratunga and published by Springer. This book was released on 2015-12-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.

Download or read book Geotechnical Engineering written by Donald P. Coduto and published by Prentice Hall. This book was released on 2011 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotechnical Engineering: Principles and Practices, 2/e, is ideal or junior-level soil mechanics or introductory geotechnical engineering courses. This introductory geotechnical engineering textbook explores both the principles of soil mechanics and their application to engineering practice. It offers a rigorous, yet accessible and easy-to-read approach, as well as technical depth and an emphasis on understanding the physical basis for soil behavior. The second edition has been revised to include updated content and many new problems and exercises, as well as to reflect feedback from reviewers and the authors' own experiences.

Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.

Download or read book Soil Mechanics in Engineering Practice written by Karl Terzaghi and published by Wharton Press. This book was released on 2010-11 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the definitive handbook to soil mechanics, covering in great detail such topics as: Properties of Soils, Hydraulic and Mechanical Properties of Soils, Drainage of Soils, Plastic Equilibrium in Soils, Earth Stability and Pressure of Slopes, Foundations, etc. A valuable compendium for those interested in soil mechanics, this antiquarian text contains a wealth of information still very much valuable to engineers today. Karl von Terzaghi (1883 1963) was a Czech geologist and Civil engineer, hailed as the "father of soil mechanics." This book has been elected for republication due to its educational value and is proudly republished here with an introductory biography of the author."

Download or read book Soil Liquefaction written by Michael Jefferies and published by CRC Press. This book was released on 2006-09-04 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soil liquefaction is a major concern in areas of the world subject to seismic activity or other repeated vibration loads. This book brings together a large body of information on the topic, and presents it within a unified and simple framework. The result is a book which will provide the practising civil engineer with a very sound understanding of

Download or read book Soil Strength and Slope Stability written by J. Michael Duncan and published by John Wiley & Sons. This book was released on 2014-09-22 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to the critical issue of slope stability and safety Soil Strength and Slope Stability, Second Edition presents the latest thinking and techniques in the assessment of natural and man-made slopes, and the factors that cause them to survive or crumble. Using clear, concise language and practical examples, the book explains the practical aspects of geotechnical engineering as applied to slopes and embankments. The new second edition includes a thorough discussion on the use of analysis software, providing the background to understand what the software is doing, along with several methods of manual analysis that allow readers to verify software results. The book also includes a new case study about Hurricane Katrina failures at 17th Street and London Avenue Canal, plus additional case studies that frame the principles and techniques described. Slope stability is a critical element of geotechnical engineering, involved in virtually every civil engineering project, especially highway development. Soil Strength and Slope Stability fills the gap in industry literature by providing practical information on the subject without including extraneous theory that may distract from the application. This balanced approach provides clear guidance for professionals in the field, while remaining comprehensive enough for use as a graduate-level text. Topics include: Mechanics of soil and limit equilibrium procedures Analyzing slope stability, rapid drawdown, and partial consolidation Safety, reliability, and stability analyses Reinforced slopes, stabilization, and repair The book also describes examples and causes of slope failure and stability conditions for analysis, and includes an appendix of slope stability charts. Given how vital slope stability is to public safety, a comprehensive resource for analysis and practical action is a valuable tool. Soil Strength and Slope Stability is the definitive guide to the subject, proving useful both in the classroom and in the field.

Download or read book Geotechnical Engineering written by Renato Lancellotta and published by CRC Press. This book was released on 2008-07-22 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Suitable for undergraduates in geotechnical engineering and for use by graduate students, this book explores not only the basics but also several advanced aspects of soil behaviour. Readers gain a good grasp of applied mechanics, testing and experimentation, and methods for observing real structures. Numerous worked examples are included, as is essential reading for students at the end of each chapter.Selected contents:1. Nature and composition of soils 2. Principles of continuum mechanics 3. Constitutive models 4. The porous medium 5. Mechanical behaviour of soils 6. Flow in porous media 7. In situ investigations 8. The collapse of soil structures 9. Performance and serviceability o

Download or read book An Introduction to Frozen Ground Engineering written by Orlando B. Andersland and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frozen Ground Engineering first introduces the reader to the frozen environment and the behavior of frozen soil as an engineering material. In subsequent chapters this information is used in the analysis and design of ground support systems, foundations, and embankments. These and other topics make this book suitable for use by civil engineering students in a one-semester course on frozen ground engineering at the senior or first-year-graduate level. Students are assumed to have a working knowledge of undergraduate mechanics (statics and mechanics of materials) and geotechnical engineering (usual two-course sequence). A knowledge of basic geology would be helpful but is not essential. This book will also be useful to advanced students in other disciplines and to engineers who desire an introduction to frozen ground engineering or references to selected technical publications in the field. BACKGROUND Frozen ground engineering has developed rapidly in the past several decades under the pressure of necessity. As practical problems involving frozen soils broadened in scope, the inadequacy of earlier methods for coping became increasingly apparent. The application of ground freezing to geotechnical projects throughout the world continues to grow as significant advances have been made in ground freezing technology. Freezing is a useful and versatile technique for temporary earth support, groundwater control in difficult soil or rock strata, and the formation of subsurface containment barriers suitable for use in groundwater remediation projects.

Download or read book Reflections on Slope Stability Engineering written by Edward N. Bromhead and published by CRC Press. This book was released on 2023-09-19 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: Slope stability engineering is both an art and a science practised by many civil and geotechnical engineers involved in work on landslides, earth dams, breakwaters, coastal defence, earthworks slopes for roads, canals, railways, pipelines, housing developments, and other related developments. This book contains the detailed reflections of its author, who has practised and researched in the field for over a half-century. It is written in an informal style that makes it an interesting and thought-provoking practitioner guide to landslides and slope problems and their investigation, analysis, and remediation, considering both natural and man-made slopes and earthworks, and without the need for the usual equations and illustrations. Reflections on Slope Stability Engineering is targeted primarily at practitioners working in the investigations of slope instability and the design and construction of treatments of the problem, especially those early in their careers, but the accessible style also suits students who are developing an interest in the subject and even those engineers with only a casual interest in this branch of geotechnics.

Download or read book Geotechnical Characteristics of Soils and Rocks of India written by Sanjay Kumar Shukla and published by CRC Press. This book was released on 2021-12-31 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents mainly the geotechnical details of geomaterials (soils and rocks) found in all the 36 states and union territories of India. There are 37 chapters in this book. Chapter 1 provides an overview of geomaterials, focusing on their engineering properties as determined based on the project site investigations and laboratory/field tests; this will help readers understand the technical details explained throughout the book, with each chapter dealing with geomaterials of one state/union territory only. Each chapter, contributed by a team of authors, follows a common template with the following sections: introduction, major types of soils and rocks, properties of soils and rocks, use of soils and rocks as construction materials, foundation and other geotechnical structures, other geomaterials, natural hazards, case studies and field tests, geoenvironmental impact on soils and rocks, concluding remarks and references. All the chapters cover highly practical information and technical data for application in ground infrastructure projects, including foundations of structures (buildings, towers, tanks, machines and so on), highway, railway and airport pavements, embankments, retaining structures/walls, dams, reservoirs, canals and ponds, and landfills and tunnels. These details are also highly useful for professionals dealing with mining, oil and gas projects and agricultural and aquacultural engineering projects. Although this book covers the Indian ground characteristics, the information provided can be helpful in some suitable forms to the professionals of other countries having similar ground conditions and applications.

Download or read book Geotechnical Engineering of Dams written by Robin Fell and published by CRC Press. This book was released on 2014-11-21 with total page 1374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive text on the geotechnical and geological aspects of the investigations for and the design and construction of new dams and the review and assessment of existing dams. The book provides dam engineers and geologists with a practical approach, and gives university students an insight into the subject of dam engineering. All phases of investigation, design and construction are covered, through to the preliminary and detailed design phases and ultimately the construction phase. This revised and expanded 2nd edition includes a lengthy new chapter on the assessment of the likelihood of failure of dams by internal erosion and piping.

Download or read book Mechanics of Residual Soils Second Edition written by Geoffrey E. Blight and published by CRC Press. This book was released on 2012-05-03 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residual soils are found in many parts of the world and are used extensively as construction materials for roads, embankments and dams, and to support the foundations of buildings, bridges and load-bearing pavements. The characteristics and engineering properties of residual soils can differ significantly from those of the more familiar transported soils. The fact that residual soils occur often in areas with tropical and sub-tropical climates and (extensively) in semi-arid climates, adds another dimension to their engineering performance, that of unsaturation. Although there are many books that deal with the mechanics of soils, these are based mainly on the characteristics and behaviour of saturated transported soils. The first edition of this book was the first book to be written specifically about the mechanics of residual soils. The book was prepared by a panel of authors drawn from the Technical Committee on Tropical and Residual Soils of the International Society for Soil Mechanics and Foundation Engineering. It was written as a practical professional guide for geotechnical engineers working with residual soils. The second edition has retained the valuable information contained in the first edition. The present editors and authors have extensively revised and augmented the content to bring it completely up to date, adding significantly to the sections on unsaturated soil mechanics and expanding the range and number of instructive case histories. Furthermore, sections on pedocretes, dispersive soils and karst have been added.

Download or read book Foundation Design Principles and Practices written by Donald P. Coduto and published by Pearson Higher Ed. This book was released on 2013-10-03 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: For undergraduate/graduate-level foundation engineering courses. Covers the subject matter thoroughly and systematically, while being easy to read. Emphasizes a thorough understanding of concepts and terms before proceeding with analysis and design, and carefully integrates the principles of foundation engineering with their application to practical design problems.

Download or read book Evaluation of Soil and Rock Properties written by P. J. Sabatini and published by . This book was released on 2004-10-01 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document presents state-of-the-practice information on the evaluation of soil and rock properties for geotechnical design applications. This document addresses the entire range of materials potentially encountered in highway engineering practice, from soft clay to intact rock and variations of materials that fall between these two extremes. Information is presented on parameters measured, evaluation of data quality, and interpretation of properties for conventional soil and rock laboratory testing, as well as in situ devices such as field vane testing, cone penetration testing, dilatometer, pressuremeter, and borehole jack. This document provides the design engineer with information that can be used to develop a rationale for accepting or rejecting data and for resolving inconsistencies between data provided by different laboratories and field tests. This document also includes information on: (1) the use of Geographical Information Systems (GIS) and Personal Data Assistance devices for the collection and interpretation of subsurface information; (2) quantitative measures for evaluating disturbance of laboratory soil samples; and (3) the use of measurements from geophysical testing techniques to obtain information on the modulus of soil. Also included are chapters on evaluating properties of special soil materials (e.g., loess, cemented sands, peats and organic soils, etc.) and the use of statistical information in evaluating anomalous data and obtaining design values for soil and rock properties. An appendix of three detailed soil and rock property selection examples is provided which illustrate the application of the methods described in the document.