Download or read book Smart Morphing and Sensing for Aeronautical Configurations written by Marianna Braza and published by Springer Nature. This book was released on 2023-02-14 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on advanced strategies to design, modeling and testing morphing wings for aeronautical applications. Covering the major outcomes of the multidisciplinary project “Smart Morphing & Sensing” (H2020 N° 723402 SMS), funded by the European Union between 2017 and 2020, it presents a complete set of theories and methods that have been used and developed to integrate novel electroactive actuators and sensors in wings, for the purpose of increasing their aerodynamic efficiency and attenuate vibrations and noise. Topics include: integrated aeroelastic design of morphing wings using high-fidelity computational fluid dynamics and structural mechanics, distributed sensing using a new generation of high-fidelity fiber optics sensors, and controller design by appropriate flight control commands. Further, the book reports on advanced experimental techniques to validate novel actuation and sensing systems on the built prototypes via wind tunnel tests at subsonic (take-off and landing) and transonic (cruise) speeds. All in all, this volume provides readers with extensive and timely information on research and developments of bioinspired aircraft wings.
Download or read book Advances in Computational Methods and Technologies in Aeronautics and Industry written by Dietrich Knoerzer and published by Springer Nature. This book was released on 2022-12-12 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides research results using computational methods for fluid dynamics and engineering problems in aeronautics and other scientific and industrial applications. It gives an overview on the state of the art and the technology trends requiring advanced computational methods towards digitization in industrial and scientific processes. The chapters are based on Special Technology Sessions of the WCCM-ECCOMAS Virtual Congress 2021.
Download or read book Advanced Computational Methods and Design for Greener Aviation written by Tero Tuovinen and published by Springer Nature. This book was released on with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluid Structure Sound Interactions and Control written by Marianna Braza and published by Springer Nature. This book was released on 2021-05-05 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a thorough and unique record of recent advances in the important scientific fields fluid–structure interaction, acoustics and control of priority interest in the academic community and also in an industrial context regarding new engineering designs. It updates advances in these fields by presenting state-of-the-art developments and achievements since the previous Book published by Springer in 2018 after the 4th FSSIC Symposium. This book is unique within the related literature investigating advances in these fields because it addresses them in a complementary way and thereby enhances cross-fertilization between them, whereas other books treat these fields separately.
Download or read book Advances in Critical Flow Dynamics Involving Moving Deformable Structures with Design Applications written by Marianna Braza and published by Springer Nature. This book was released on 2021-02-10 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on the latest knowledge concerning critical phenomena arising in fluid-structure interaction due to movement and/or deformation of bodies. The focus of the book is on reporting progress in understanding turbulence and flow control to improve aerodynamic / hydrodynamic performance by reducing drag, increasing lift or thrust and reducing noise under critical conditions that may result in massive separation, strong vortex dynamics, amplification of harmful instabilities (flutter, buffet), and flow -induced vibrations. Theory together with large-scale simulations and experiments have revealed new features of turbulent flow in the boundary layer over bodies and in thin shear layers immediately downstream of separation. New insights into turbulent flow interacting with actively deformable structures, leading to new ways of adapting and controlling the body shape and vibrations to respond to these critical conditions, are investigated. The book covers new features of turbulent flows in boundary layers over wings and in shear layers immediately downstream: studies of natural and artificially generated fluctuations; reduction of noise and drag; and electromechanical conversion topics. Smart actuators as well as how smart designs lead to considerable benefits compared with conventional methods are also extensively discussed. Based on contributions presented at the IUTAM Symposium “Critical Flow Dynamics involving Moving/Deformable Structures with Design applications”, held in June 18-22, 2018, in Santorini, Greece, the book provides readers with extensive information about current theories, methods and challenges in flow and turbulence control, and practical knowledge about how to use this information together with smart and bio-inspired design tools to improve aerodynamic and hydrodynamic design and safety.
Download or read book Morphing Wing Technologies written by Sergio Ricci and published by Butterworth-Heinemann. This book was released on 2017-10-27 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt: Morphing Wings Technologies: Large Commercial Aircraft and Civil Helicopters offers a fresh look at current research on morphing aircraft, including industry design, real manufactured prototypes and certification. This is an invaluable reference for students in the aeronautics and aerospace fields who need an introduction to the morphing discipline, as well as senior professionals seeking exposure to morphing potentialities. Practical applications of morphing devices are presented—from the challenge of conceptual design incorporating both structural and aerodynamic studies, to the most promising and potentially flyable solutions aimed at improving the performance of commercial aircraft and UAVs. Morphing aircraft are multi-role aircraft that change their external shape substantially to adapt to a changing mission environment during flight. The book consists of eight sections as well as an appendix which contains both updates on main systems evolution (skin, structure, actuator, sensor, and control systems) and a survey on the most significant achievements of integrated systems for large commercial aircraft. - Provides current worldwide status of morphing technologies, the industrial development expectations, and what is already available in terms of flying systems - Offers new perspectives on wing structure design and a new approach to general structural design - Discusses hot topics such as multifunctional materials and auxetic materials - Presents practical applications of morphing devices
Download or read book Decadal Survey of Civil Aeronautics written by National Research Council and published by National Academies Press. This book was released on 2006-10-27 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. air transportation system is very important for our economic well-being and national security. The nation is also the global leader in civil and military aeronautics, a position that needs to be maintained to help assure a strong future for the domestic and international air transportation system. Strong action is needed, however, to ensure that leadership role continues. To that end, the Congress and NASA requested the NRC to undertake a decadal survey of civil aeronautics research and technology (R&T) priorities that would help NASA fulfill its responsibility to preserve U.S. leadership in aeronautics technology. This report presents a set of strategic objectives for the next decade of R&T. It provides a set of high-priority R&T challengesâ€"-characterized by five common themesâ€"-for both NASA and non-NASA researchers, and an analysis of key barriers that must be overcome to reach the strategic objectives. The report also notes the importance of synergies between civil aeronautics R&T objectives and those of national security.
Download or read book The National Academy of Sciences Decadal Plan for Aeronautics written by United States. Congress. House. Committee on Science. Subcommittee on Space and Aeronautics and published by . This book was released on 2007 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Smart Intelligent Aircraft Structures SARISTU written by Piet Christof Wölcken and published by Springer. This book was released on 2015-09-04 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book includes the research papers presented in the final conference of the EU funded SARISTU (Smart Intelligent Aircraft Structures) project, held at Moscow, Russia between 19-21 of May 2015. The SARISTU project, which was launched in September 2011, developed and tested a variety of individual applications as well as their combinations. With a strong focus on actual physical integration and subsequent material and structural testing, SARISTU has been responsible for important progress on the route to industrialization of structure integrated functionalities such as Conformal Morphing, Structural Health Monitoring and Nanocomposites. The gap- and edge-free deformation of aerodynamic surfaces known as conformal morphing has gained previously unrealized capabilities such as inherent de-icing, erosion protection and lightning strike protection, while at the same time the technological risk has been greatly reduced. Individual structural health monitoring techniques can now be applied at the part-manufacturing level rather than via extending an aircraft’s time in the final assembly line. And nanocomposites no longer lose their improved properties when trying to upscale from neat resin testing to full laminate testing at element level. As such, this book familiarizes the reader with the most significant develo pments, achievements and key technological steps which have been made possible through the four-year long cooperation of 64 leading entities from 16 different countries with the financial support of the European Commission.
Download or read book National Academy of Sciences decadal plan for aeronautics hearings written by and published by DIANE Publishing. This book was released on with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bioinspired Actuators and Sensors written by Minoru Taya and published by Cambridge University Press. This book was released on 2016-10-13 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: From experts in engineering and biology, this is the first book to integrate sensor and actuator technology with bioinspired design.
Download or read book Journal of the Royal Aeronautical Society written by and published by . This book was released on 2006 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Human Missions to Mars written by Donald Rapp and published by Springer. This book was released on 2015-10-31 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: A mission to send humans to explore the surface of Mars has been the ultimate goal of planetary exploration since the 1950s, when von Braun conjectured a flotilla of 10 interplanetary vessels carrying a crew of at least 70 humans. Since then, more than 1,000 studies were carried out on human missions to Mars, but after 60 years of study, we remain in the early planning stages. The second edition of this book now includes an annotated history of Mars mission studies, with quantitative data wherever possible. Retained from the first edition, Donald Rapp looks at human missions to Mars from an engineering perspective. He divides the mission into a number of stages: Earth’s surface to low-Earth orbit (LEO); departing from LEO toward Mars; Mars orbit insertion and entry, descent and landing; ascent from Mars; trans-Earth injection from Mars orbit and Earth return. For each segment, he analyzes requirements for candidate technologies. In this connection, he discusses the status and potential of a wide range of elements critical to a human Mars mission, including life support consumables, radiation effects and shielding, microgravity effects, abort options and mission safety, possible habitats on the Martian surface and aero-assisted orbit entry decent and landing. For any human mission to the Red Planet the possible utilization of any resources indigenous to Mars would be of great value and such possibilities, the use of indigenous resources is discussed at length. He also discusses the relationship of lunar exploratio n to Mars exploration. Detailed appendices describe the availability of solar energy on the Moon and Mars, and the potential for utilizing indigenous water on Mars. The second edition provides extensive updating and additions to the first edition, including many new figures and tables, and more than 70 new references, as of 2015.
Download or read book Innovation in Aeronautics written by T Young and published by Elsevier. This book was released on 2012-06-22 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation in aerospace design and engineering is essential to meet the many challenges facing this sector. Innovation in aeronautics explores both a range of innovative ideas and how the process of innovation itself can be effectively managed.After an introduction to innovation in aeronautics, part one reviews developments including biologically-inspired technologies, morphing aerodynamic concepts, jet engine design drivers, and developments underpinned by digital technologies. The environment and human factors in innovation are also explored as are trends in supersonic passenger air travel. Part two goes on to examine change and the processes and management involved in innovative technology development. Challenges faced in aeronautical production are the focus of part three, which reviews topics such as intellectual property and patents, risk mitigation and the use of lean engineering. Finally, part four examines key issues in what makes for successful innovation in this sector.With its distinguished editors and international team of expert contributors, Innovation in aeronautics is an essential guide for all those involved in the design and engineering of aerospace structures and systems. - Explores a range of innovative aerospace design ideas - Discusses how the process of innovation itself can be effectively managed - Reviews developments including biologically-inspired technologies, morphing aerodynamic concepts, jet engine design drivers and developments underpinned by digital technologies
Download or read book Airborne Wind Energy written by Roland Schmehl and published by Springer. This book was released on 2018-03-31 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth coverage of the latest research and development activities concerning innovative wind energy technologies intended to replace fossil fuels on an economical basis. A characteristic feature of the various conversion concepts discussed is the use of tethered flying devices to substantially reduce the material consumption per installed unit and to access wind energy at higher altitudes, where the wind is more consistent. The introductory chapter describes the emergence and economic dimension of airborne wind energy. Focusing on “Fundamentals, Modeling & Simulation”, Part I includes six contributions that describe quasi-steady as well as dynamic models and simulations of airborne wind energy systems or individual components. Shifting the spotlight to “Control, Optimization & Flight State Measurement”, Part II combines one chapter on measurement techniques with five chapters on control of kite and ground stations, and two chapters on optimization. Part III on “Concept Design & Analysis” includes three chapters that present and analyze novel harvesting concepts as well as two chapters on system component design. Part IV, which centers on “Implemented Concepts”, presents five chapters on established system concepts and one chapter about a subsystem for automatic launching and landing of kites. In closing, Part V focuses with four chapters on “Technology Deployment” related to market and financing strategies, as well as on regulation and the environment. The book builds on the success of the first volume “Airborne Wind Energy” (Springer, 2013), and offers a self-contained reference guide for researchers, scientists, professionals and students. The respective chapters were contributed by a broad variety of authors: academics, practicing engineers and inventors, all of whom are experts in their respective fields.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1020 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Nonlinear Aeroelasticity written by Grigorios Dimitriadis and published by John Wiley & Sons. This book was released on 2017-03-10 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Nonlinear Aeroelasticity Introduces the latest developments and technologies in the area of nonlinear aeroelasticity Nonlinear aeroelasticity has become an increasingly popular research area in recent years. There have been many driving forces behind this development, increasingly flexible structures, nonlinear control laws, materials with nonlinear characteristics and so on. Introduction to Nonlinear Aeroelasticity covers the theoretical basics in nonlinear aeroelasticity and applies the theory to practical problems. As nonlinear aeroelasticity is a combined topic, necessitating expertise from different areas, the book introduces methodologies from a variety of disciplines such as nonlinear dynamics, bifurcation analysis, unsteady aerodynamics, non-smooth systems and others. The emphasis throughout is on the practical application of the theories and methods, so as to enable the reader to apply their newly acquired knowledge Key features: Covers the major topics in nonlinear aeroelasticity, from the galloping of cables to supersonic panel flutter Discusses nonlinear dynamics, bifurcation analysis, numerical continuation, unsteady aerodynamics and non-smooth systems Considers the practical application of the theories and methods Covers nonlinear dynamics, bifurcation analysis and numerical methods Accompanied by a website hosting Matlab code Introduction to Nonlinear Aeroelasticity is a comprehensive reference for researchers and workers in industry and is also a useful introduction to the subject for graduate and undergraduate students across engineering disciplines.
