Download or read book Single phase grounding line selection method for closed loop distribution network adapted to medium voltage microgrid access written by Qinghui Lu and published by OAE Publishing Inc.. This book was released on 2023-09-16 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aim: The access of the medium-voltage (MV) microgrid changes the radial structure of traditional distribution networks, causing the distribution network to operate in a closed-loop manner. The closed-loop operation complicates the fault characteristics of the distribution network, and the traditional single-phase grounding (SPG) line selection method is no longer applicable. Therefore, it is necessary to propose a new targeted SPG line selection method. Methods: This paper analyzes the network structure of MV microgrids and MV distribution networks and establishes a multi-level closed-loop operation distribution network model with MV microgrid access. Then, the SPG fault characteristics of the closed-loop operation distribution system under the small current grounding mode are analyzed from the perspective of two-level bus nodes. Furthermore, based on the analysis of fault characteristics, a closed-loop operation distribution network line selection method suitable for microgrid access is proposed, and a detailed design is carried out in terms of equipment configuration and communication schemes, forming a relatively complete automatic line selection system. At the same time, the proposed line selection scheme is based on the two-level bus nodes, which can be analogously applied to the multi-level closed-loop operation distribution network. Results: The simulation results show that the proposed line selection scheme can be effectively applied to the closed-loop operation distribution network with MV microgrid access. Conclusion: The traditional SPG line selection method will have misjudgment problems after the MV microgrid is integrated into the distribution network, but the line selection method proposed in this paper has good adaptability.
Download or read book Microgrids and Active Distribution Networks written by Sunetra Chowdhury and published by IET. This book was released on 2009-06-24 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microgrids and Active Distribution Networks offer a potential solution for sustainable, energy-efficient power supply to cater for increasing load growth, supplying power to remote areas, generation of clean power and reduction in emission of greenhouse gases & particulates as per Kyoto protocol.
Download or read book Microgrids written by Nikos Hatziargyriou and published by John Wiley & Sons. This book was released on 2014-03-03 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microgrids are the most innovative area in the electric power industry today. Future microgrids could exist as energy-balanced cells within existing power distribution grids or stand-alone power networks within small communities. A definitive presentation on all aspects of microgrids, this text examines the operation of microgrids – their control concepts and advanced architectures including multi-microgrids. It takes a logical approach to overview the purpose and the technical aspects of microgrids, discussing the social, economic and environmental benefits to power system operation. The book also presents microgrid design and control issues, including protection and explaining how to implement centralized and decentralized control strategies. Key features: original, state-of-the-art research material written by internationally respected contributors unique case studies demonstrating success stories from real-world pilot sites from Europe, the Americas, Japan and China examines market and regulatory settings for microgrids, and provides evaluation results under standard test conditions a look to the future – technical solutions to maximize the value of distributed energy along with the principles and criteria for developing commercial and regulatory frameworks for microgrids Offering broad yet balanced coverage, this volume is an entry point to this very topical area of power delivery for electric power engineers familiar with medium and low voltage distribution systems, utility operators in microgrids, power systems researchers and academics. It is also a useful reference for system planners and operators, manufacturers and network operators, government regulators, and postgraduate power systems students. CONTRIBUTORS Thomas Degner Aris Dimeas Alfred Engler Nuno Gil Asier Gil de Muro Guillermo Jiménez-Estévez George Kariniotakis George Korres André Madureira Meiqin Mao Chris Marnay Jose Miguel Yarza Satoshi Morozumi Alexander Oudalov Frank van Overbeeke Rodrigo Palma Behnke Joao Abel Pecas Lopes Fernanda Resende John Romankiewicz Christine Schwaegerl Nikos Soultanis Liang Tao Antonis Tsikalakis
Download or read book Handbook on Battery Energy Storage System written by Asian Development Bank and published by Asian Development Bank. This book was released on 2018-12-01 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook serves as a guide to deploying battery energy storage technologies, specifically for distributed energy resources and flexibility resources. Battery energy storage technology is the most promising, rapidly developed technology as it provides higher efficiency and ease of control. With energy transition through decarbonization and decentralization, energy storage plays a significant role to enhance grid efficiency by alleviating volatility from demand and supply. Energy storage also contributes to the grid integration of renewable energy and promotion of microgrid.
Download or read book Power Distribution Planning Reference Book Second Edition written by H. Lee Willis and published by CRC Press. This book was released on 2004-03-01 with total page 1246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing more than twice the content of the original edition, this new edition is the premier source on the selection, development, and provision of safe, high-quality, and cost-effective electric utility distribution systems, and it promises vast improvements in system reliability and layout by spanning every aspect of system planning including load forecasting, scheduling, performance, and economics. Responding to the evolving needs of electric utilities, Power Distribution Planning Reference Book presents an abundance of real-world examples, procedural and managerial issues, and engineering and analytical methodologies that are crucial to efficient and enhanced system performance.
Download or read book Handbook on Microgrids for Power Quality and Connectivity written by Asian Development Bank and published by Asian Development Bank. This book was released on 2020-07-01 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microgrids are poised to play a big role in the electricity ecosystem of the future—with decarbonization, digitalization, decentralization, and non-wires solutions being key attributes. This handbook serves as a guide to evaluate the feasibility of microgrid systems in enhancing power supply quality and connectivity. It includes information about on-grid microgrids for urban and industrial applications, prevailing business models, and emerging trends that could shape the future of this sector.
Download or read book Enhancing the Resilience of the Nation s Electricity System written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-10-25 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Americans' safety, productivity, comfort, and convenience depend on the reliable supply of electric power. The electric power system is a complex "cyber-physical" system composed of a network of millions of components spread out across the continent. These components are owned, operated, and regulated by thousands of different entities. Power system operators work hard to assure safe and reliable service, but large outages occasionally happen. Given the nature of the system, there is simply no way that outages can be completely avoided, no matter how much time and money is devoted to such an effort. The system's reliability and resilience can be improved but never made perfect. Thus, system owners, operators, and regulators must prioritize their investments based on potential benefits. Enhancing the Resilience of the Nation's Electricity System focuses on identifying, developing, and implementing strategies to increase the power system's resilience in the face of events that can cause large-area, long-duration outages: blackouts that extend over multiple service areas and last several days or longer. Resilience is not just about lessening the likelihood that these outages will occur. It is also about limiting the scope and impact of outages when they do occur, restoring power rapidly afterwards, and learning from these experiences to better deal with events in the future.
Download or read book Electricity Distribution Network Design written by Erkki Lakervi and published by IET. This book was released on 1995 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study outlines the theoretical and practical aspects which are relevant to the design of distribution networks, particularly the increased use of computers in their design and operation. The edition has been revised to include material on electromagnetic compatibility and legislation.
Download or read book Control and Automation of Electrical Power Distribution Systems written by James Northcote-Green and published by CRC Press. This book was released on 2017-12-19 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Implementing the automation of electric distribution networks, from simple remote control to the application of software-based decision tools, requires many considerations, such as assessing costs, selecting the control infrastructure type and automation level, deciding on the ambition level, and justifying the solution through a business case. Control and Automation of Electric Power Distribution Systems addresses all of these issues to aid you in resolving automation problems and improving the management of your distribution network. Bringing together automation concepts as they apply to utility distribution systems, this volume presents the theoretical and practical details of a control and automation solution for the entire distribution system of substations and feeders. The fundamentals of this solution include depth of control, boundaries of control responsibility, stages of automation, automation intensity levels, and automated device preparedness. To meet specific performance goals, the authors discuss distribution planning, performance calculations, and protection to facilitate the selection of the primary device, associated secondary control, and fault indicators. The book also provides two case studies that illustrate the business case for distribution automation (DA) and methods for calculating benefits, including the assessment of crew time savings. As utilities strive for better economies, DA, along with other tools described in this volume, help to achieve improved management of the distribution network. Using Control and Automation of Electric Power Distribution Systems, you can embark on the automation solution best suited for your needs.
Download or read book Distribution System Modeling and Analysis written by William H. Kersting and published by CRC Press. This book was released on 2001-08-31 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: For decades, distribution engineers did not have the sophisticated tools developed for analyzing transmission systems-often they had only their instincts. Things have changed, and we now have computer programs that allow engineers to simulate, analyze, and optimize distribution systems. Powerful as these programs are, however, without a real unders
Download or read book Microgrid Architectures Control and Protection Methods written by Naser Mahdavi Tabatabaei and published by Springer. This book was released on 2019-08-01 with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents intuitive explanations of the principles of microgrids, including their structure and operation and their applications. It also discusses the latest research on microgrid control and protection technologies and the essentials of microgrids as well as enhanced communication systems. The book provides solutions to microgrid operation and planning issues using various methodologies including planning and modelling; AC and DC hybrid microgrids; energy storage systems in microgrids; and optimal microgrid operational planning. Written by specialists, it is filled in innovative solutions and research related to microgrid operation, making it a valuable resource for those interested in developing updated approaches in electric power analysis, design and operational strategies. Thanks to its in-depth explanations and clear, three-part structure, it is useful for electrical engineering students, researchers and technicians.
Download or read book Microgrids written by Amjad Anvari-Moghaddam and published by Springer Nature. This book was released on 2021-04-16 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview on the latest developments in the control, operation, and protection of microgrids. It provides readers with a solid approach to analyzing and understanding the salient features of modern control and operation management techniques applied to these systems, and presents practical methods with examples and case studies from actual and modeled microgrids. The book also discusses emerging concepts, key drivers and new players in microgrids, and local energy markets while addressing various aspects from day-ahead scheduling to real-time testing of microgrids. The book will be a valuable resource for researchers who are focused on control concepts, AC, DC, and AC/DC microgrids, as well as those working in the related areas of energy engineering, operations research and its applications to energy systems. Presents modern operation, control and protection techniques with applications to real world and emulated microgrids; Discusses emerging concepts, key drivers and new players in microgrids and local energy markets; Addresses various aspects from day-ahead scheduling to real-time testing of microgrids.
Download or read book Grid Converters for Photovoltaic and Wind Power Systems written by Remus Teodorescu and published by John Wiley & Sons. This book was released on 2011-07-28 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grid converters are the key player in renewable energy integration. The high penetration of renewable energy systems is calling for new more stringent grid requirements. As a consequence, the grid converters should be able to exhibit advanced functions like: dynamic control of active and reactive power, operation within a wide range of voltage and frequency, voltage ride-through capability, reactive current injection during faults, grid services support. This book explains the topologies, modulation and control of grid converters for both photovoltaic and wind power applications. In addition to power electronics, this book focuses on the specific applications in photovoltaic wind power systems where grid condition is an essential factor. With a review of the most recent grid requirements for photovoltaic and wind power systems, the book discusses these other relevant issues: modern grid inverter topologies for photovoltaic and wind turbines islanding detection methods for photovoltaic systems synchronization techniques based on second order generalized integrators (SOGI) advanced synchronization techniques with robust operation under grid unbalance condition grid filter design and active damping techniques power control under grid fault conditions, considering both positive and negative sequences Grid Converters for Photovoltaic and Wind Power Systems is intended as a coursebook for graduated students with a background in electrical engineering and also for professionals in the evolving renewable energy industry. For people from academia interested in adopting the course, a set of slides is available for download from the website. www.wiley.com/go/grid_converters
Download or read book Microgrid Protection and Control written by Dehua Zheng and published by Academic Press. This book was released on 2021-06-23 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microgrid Protection and Control is the result of numerous research works and publications by R&D engineers and scientists of the Microgrid and Energy Internet Research Centre. Through the authors long-routed experience in the microgrid and energy internet industry, this book looks at the sophisticated protection and control issues connected to the special nature of microgrid. The book explains the different ways of classifying types of microgrids and common misconceptions, looking at industrial and research trends along with the different technical issues and challenges faced with deploying microgrid in various settings. Forecasting short-term demand and renewable generation for optimal operation is covered with techniques for accurate enhancement supported with practical application examples. With chapters on dynamic, transient and tertiary control and experimental and simulation tests this reference is useful for all those working in the research, engineering and application of microgrids and power distribution systems. Contains practical examples to support the research and experimental results on microgrid protection and control Includes detailed theories and referential algorithms Provides innovative solutions to technical issues in protection and control of microgrids
Download or read book Three Dimensional Integrated Circuit Design written by Vasilis F. Pavlidis and published by Newnes. This book was released on 2017-07-04 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-Dimensional Integrated Circuit Design, Second Eition, expands the original with more than twice as much new content, adding the latest developments in circuit models, temperature considerations, power management, memory issues, and heterogeneous integration. 3-D IC experts Pavlidis, Savidis, and Friedman cover the full product development cycle throughout the book, emphasizing not only physical design, but also algorithms and system-level considerations to increase speed while conserving energy. A handy, comprehensive reference or a practical design guide, this book provides effective solutions to specific challenging problems concerning the design of three-dimensional integrated circuits. Expanded with new chapters and updates throughout based on the latest research in 3-D integration: Manufacturing techniques for 3-D ICs with TSVs Electrical modeling and closed-form expressions of through silicon vias Substrate noise coupling in heterogeneous 3-D ICs Design of 3-D ICs with inductive links Synchronization in 3-D ICs Variation effects on 3-D ICs Correlation of WID variations for intra-tier buffers and wires Offers practical guidance on designing 3-D heterogeneous systems Provides power delivery of 3-D ICs Demonstrates the use of 3-D ICs within heterogeneous systems that include a variety of materials, devices, processors, GPU-CPU integration, and more Provides experimental case studies in power delivery, synchronization, and thermal characterization
Download or read book Smart Microgrids written by Sasi K. Kottayil and published by CRC Press. This book was released on 2020-08-17 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the need to understand the development, use, construction, and operation of smart microgrids (SMG). Covering selected major operations of SMG like dynamic energy management, demand response, and demand dispatch, it describes the design and operational challenges of different microgrids and provides feasible solutions for systems. Smart Micro Grid presents communication technologies and governing standards used in developing communication networks for realizing various smart services and applications in microgrids. An architecture facilitating bidirectional communication for smart distribution/microgrid is brought out covering aspects of its design, development and validation. The book is aimed at graduate, research students and professionals in power, power systems, and power electronics. Features: • Covers a broad overview of the benefits, the design and operation requirements, standards and communication requirements for deploying microgrids in distribution systems. • Explores issues related to planning, expansion, operation, type of microgrids, interaction among microgrid and distribution networks, demand response, and the technical requirements for the communication network. • Discusses current standards and common practices to develop and operate microgrids. • Describes technical issues and requirements for operating microgrids. • Illustrates smart communication architecture and protocols.
Download or read book Smart Grid Systems written by N. Ramesh Babu and published by CRC Press. This book was released on 2018-07-04 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric power systems are being transformed from older grid systems to smart grids across the globe. The goals of this transition are to address today’s electric power issues, which include reducing carbon footprints, finding alternate sources of decaying fossil fuels, eradicating losses that occur in the current available systems, and introducing the latest information and communication technologies (ICT) for electric grids. The development of smart grid technology is advancing dramatically along with and in reaction to the continued growth of renewable energy technologies (especially wind and solar power), the growing popularity of electric vehicles, and the continuing huge demand for electricity. Smart Grid Systems: Modeling and Control advances the basic understanding of smart grids and focuses on recent technological advancements in the field. This book provides a comprehensive discussion from a number of experts and practitioners and describes the challenges and the future scope of the technologies related to smart grid. Key features: provides an overview of the smart grid, with its needs, benefits, challenges, existing structure, and possible future technologies discusses solar photovoltaic (PV) system modeling and control along with battery storage, an integral part of smart grids discusses control strategies for renewable energy systems, including solar PV, wind, and hybrid systems describes the inverter topologies adopted for integrating renewable power covers the basics of the energy storage system and the need for micro grids describes forecast techniques for renewable energy systems presents the basics and structure of the energy management system in smart grids, including advanced metering, various communication protocols, and the cyber security challenges explores electric vehicle technology and its interaction with smart grids