Download or read book Simultaneous Catalytic Removal of Diesel Soot and NOx written by Wenfeng Shangguan and published by Springer. This book was released on 2018-06-28 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book not only explores catalysis processes in redox reactions but also proposes a potential after-treatment strategy. Summarizing the authors’ major works, it offers a guidebook for those working on environmental and industrial catalysis. It presents insights into reaction kinetics in a variety of materials and analyzes the external conditions influencing the reaction. As such it is of particular interest to engineers and scientists in the field of material chemistry, chemical engineering and automobile industry. With novel images and illustrations, it provides a new perspective for interpreting soot abatement material and understanding the reaction process and inspires scientists to design new catalysts with moderate redox capacity.
Download or read book Simultaneous Catalytic Removal of Diesel Soot and NOx written by 上官文峰 and published by . This book was released on 2018 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Simultaneous Reduction of Soot and NOx in Diesel Engines by Homogeneous Catalysis of Group Platinum Metals written by R. M. Montano and published by . This book was released on 1989 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Simultaneous Control of NOx and Organic Particles Using Plasma Assisted Catalysis written by and published by . This book was released on 2001 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water and higher concentrations of oxygen present in diesel and turbine combustion exhausts inhibit and deactivate selective reduction (SCR) catalysts that are effective in removing NOx from internal combustion engine exhausts. Ox idation of NO to NO2, the slow step in SCR treatment, is accomplished rapidly as a competing process during plasma-catalyzed oxidation of hydrocarbon (HO) fuels in exhausts. Reduction of NO2 so formed is effected by passage of the heated stream through a bed of alumina of practically any configuration. Two-stage reactors to perform these steps were assembled and tested at bench-, pilot- and full-scale on exhaust from a 5.9-L Cummins diesel engine. The process, called plasma-assisted catalytic reduction (PACR), removed 95% of NOx at pilot scale using propene as the HO. Diesel fuel was used in the three sets of engine tests, and under these conditions PACR consistently achieved 50-55% reduction of NOx at a net fuel penalty of 5% to operate the control. Fuel sulfur did not affect the PACR process, and SO2 was not oxidized. Conduction across the high-voltage insulator was observed as a problem, but oxidation of deposited soot by the plasma was also observed and the system could be reconfigured using the plasma to prevent soot accumulation. Fuel cracking to enhance NO2 reduction was proposed but not tested.
Download or read book Urea SCR Technology for deNOx After Treatment of Diesel Exhausts written by Isabella Nova and published by Springer Science & Business Media. This book was released on 2014-03-14 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: Urea-SCR Technology for deNOx After Treatment of Diesel Exhausts presents a complete overview of the selective catalytic reduction of NOx by ammonia/urea. The book starts with an illustration of the technology in the framework of the current context (legislation, market, system configurations), covers the fundamental aspects of the SCR process (catalysts, chemistry, mechanism, kinetics) and analyzes its application to useful topics such as modeling of full scale monolith catalysts, control aspects, ammonia injections systems and integration with other devices for combined removal of pollutants.
Download or read book Perovskites and Related Mixed Oxides written by Pascal Granger and published by John Wiley & Sons. This book was released on 2016-02-23 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook and ready reference details all the main achievements in the field of perovskite-based and related mixed-oxide materials. The authors discuss, in an unbiased manner, the potentials as well as the challenges related to their use, thus offering new perspectives for research and development on both an academic and industrial level. The first volume begins by summarizing the different synthesis routes from molten salts at high temperatures to colloidal crystal template methods, before going on to focus on the physical properties of the resulting materials and their related applications in the fields of electronics, energy harvesting, and storage as well as electromechanics and superconductivity. The second volume is dedicated to the catalytic applications of perovskites and related mixed oxides, including, but not limited to total oxidation of hydrocarbons, dry reforming of methane and denitrogenation. The concluding section deals with the development of chemical reactors and novel perovskite-based applications, such as fuel cells and high-performance ceramic membranes. Throughout, the contributions clearly point out the intimate links between structure, properties and applications of these materials, making this an invaluable tool for materials scientists and for catalytic and physical chemists.
Download or read book Simultaneous Reduction of Oxides of Nitrogen and Particulate Emissions from Diesel Engine Exhaust written by K. Yoshida and published by . This book was released on 1989 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines written by B. Ashok and published by Elsevier. This book was released on 2021-11-09 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines: Approaches Toward NOx Free Automobiles presents the fundamental theory of emission formation, particularly the oxides of nitrogen (NOx) and its chemical reactions and control techniques. The book provides a simplified framework for technical literature on NOx reduction strategies in IC engines, highlighting thermodynamics, combustion science, automotive emissions and environmental pollution control. Sections cover the toxicity and roots of emissions for both SI and CI engines and the formation of various emissions such as CO, SO2, HC, NOx, soot, and PM from internal combustion engines, along with various methods of NOx formation. Topics cover the combustion process, engine design parameters, and the application of exhaust gas recirculation for NOx reduction, making this book ideal for researchers and students in automotive, mechanical, mechatronics and chemical engineering students working in the field of emission control techniques. Covers advanced and recent technologies and emerging new trends in NOx reduction for emission control Highlights the effects of exhaust gas recirculation (EGR) on engine performance parameters Discusses emission norms such as EURO VI and Bharat stage VI in reducing global air pollution due to engine emissions
Download or read book NOx Trap Catalysts and Technologies written by Luca Lietti and published by Royal Society of Chemistry. This book was released on 2018-06-13 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicle exhaust emissions, particularly from diesel cars, are considered to be a significant problem for the environment and human health. Lean NOx Trap (LNT) or NOx Storage/Reduction (NSR) technology is one of the current techniques used in the abatement of NOx from lean exhausts. Researchers are constantly searching for new inexpensive catalysts with high efficiency at low temperatures and negligible fuel penalties, to meet the challenges of this field. This book will be the first to comprehensively present the current research on this important area. Covering the technology used, from its development in the early 1990s up to the current state-of-the-art technologies and new legislation. Beginning with the fundamental aspects of the process, the discussion will cover the real application standard through to the detailed modelling of full scale catalysts. Scientists, academic and industrial researchers, engineers working in the automotive sector and technicians working on emission control will find this book an invaluable resource.
Download or read book Encyclopedia of Plasma Technology Two Volume Set written by J. Leon Shohet and published by CRC Press. This book was released on 2016-12-12 with total page 1654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical plasmas have a wide range of industrial applications. The Encyclopedia of Plasma Technology covers all aspects of plasma technology from the fundamentals to a range of applications across a large number of industries and disciplines. Topics covered include nanotechnology, solar cell technology, biomedical and clinical applications, electronic materials, sustainability, and clean technologies. The book bridges materials science, industrial chemistry, physics, and engineering, making it a must have for researchers in industry and academia, as well as those working on application-oriented plasma technologies. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]
Download or read book Structured Catalysts and Reactors written by Andrzej Cybulski and published by CRC Press. This book was released on 2005-11-02 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in structured catalysts is steadily increasing due to the already proven, as well as potential, advantages of these catalysts. Updating the comprehensive coverage of the first edition published in 1998 with the latest science and applications, Structured Catalysts and Reactors, Second Edition gives detailed information on all aspect
Download or read book Nanostructured Catalysts for Environmental Applications written by Marco Piumetti and published by Springer Nature. This book was released on 2021-01-20 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers an overview of the recent studies and advances in environmental catalysis by nanomaterials, considering both the fundamental and the technological aspects. It offers contributions in different areas of environmental catalysis, including the catalytic and photocatalytic abatement of environmentally hazardous effluents from stationary or mobile sources, the valorization of waste and the production of sustainable energy. In other words, this monograph provides an overview of modern environmental and energy related applications with a particular emphasis to nano-sized catalytic materials. Recent concepts, experimental data and advanced theories are reported in this book to give evidence of the environmental and sustainable applications that can be found in the highly interdisciplinary field of catalysis.
Download or read book Handbook Of Advanced Methods And Processes In Oxidation Catalysis From Laboratory To Industry written by Daniel Duprez and published by World Scientific. This book was released on 2014-07-24 with total page 1035 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview of the most recent developments in both total oxidation and combustion and also in selective oxidation. For each topic, fundamental aspects are paralleled with industrial applications. The book covers oxidation catalysis, one of the major areas of industrial chemistry, outlining recent achievements, current challenges and future opportunities. One distinguishing feature of the book is the selection of arguments which are emblematic of current trends in the chemical industry, such as miniaturization, use of alternative, greener oxidants, and innovative systems for pollutant abatement. Topics outlined are described in terms of both catalyst and reaction chemistry, and also reactor and process technology.
Download or read book Bulletin of the Chemical Society of Japan written by Nihon Kagakkai and published by . This book was released on 1999 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Oxides in Energy Technologies written by Yuping Wu and published by Elsevier. This book was released on 2018-10-05 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Energy Technologies provides, for the first time, a look at the wide range of energy applications of metal oxides. Topics covered include metal oxides materials and their applications in batteries, supercapacitors, fuel cells, solar cells, supercapacitors, and much more. The book is written by an experienced author of over 240 papers in peer-reviewed journals who was also been recognized as one of Thomson Reuter’s “World’s Most Influential Scientific Minds in 2015. This book presents a unique work that is ideal for academic researchers and engineers. Presents an authoritative overview on metal oxides in energy technologies as written by an expert author who has published extensively in the area Offers up-to-date coverage of a large, rapidly growing and complex literature Focuses on applications, making it an ideal resource for those who want to apply this knowledge in industry
Download or read book Perovskite Materials Devices and Integration written by He Tian and published by BoD – Books on Demand. This book was released on 2020-06-10 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Perovskites have attracted great attention in the fields of energy storage, pollutant degradation as well as optoelectronic devices due to their excellent properties. This kind of material can be divided into two categories; inorganic perovskite represented by perovskite oxide and organic-inorganic hybrid perovskite, which have described the recent advancement separately in terms of catalysis and photoelectron applications. This book systematically illustrates the crystal structures, physic-chemical properties, fabrication process, and perovskite-related devices. In a word, perovskite has broad application prospects. However, the current challenges cannot be ignored, such as toxicity and stability.
Download or read book Selected Proceedings of the Ninth International Conference on Waste Management and Technology written by Jin Hui Li and published by Trans Tech Publications Ltd. This book was released on 2015-06-12 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the Ninth International Conference on Waste Management and Technology, October 29-30, 2014, Beijing, China. The 103 papers are grouped as follows: Chapter 1: Environmental Materials Engineering, Materials Technologies and Processing; Chapter 2: Biomass Comprehensive Utilization; Chapter 3: Soil Remediation Technologies; Chapter 4: Hazardous Waste Technologies and Sound Disposal; Chapter 5: Household Garbage Recycling and Landfill Disposal; Chapter 6: Solid Waste and Industrial Solid Waste Comprehensive Utilization and Disposal; Chapter 7: Sewage Sludge Technologies and Utilization; Chapter 8: WEEE Technology; Chapter 9: Recycling, Waste Management, Environmental Protection and Engineering