Download or read book Simulation of Reinforced Concrete Structures Under Blast and Penetration Through Lattice Discrete Particle Model written by and published by . This book was released on 2007 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials under Extreme Loadings written by Eric Buzaud and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent and cutting edge advances in our understanding of key aspects of the response of materials under extreme loads that take place during high velocity impact and penetration. The focus of the content is on the numerous challenges associated with characterization and modeling of complex interactions that occur during these highly dynamic events. The following specific topics, among others, are addressed: characterization of material behavior under extreme loadings (estimate of damage, effects related to moisture contents, large pressures, large strain rates, etc.); measurement of microstructural changes associated with damage and mesoscopic scale modeling; macroscopic modeling, using the framework of the theory of viscoplasticity and damage; modeling and simulation of localization, cracking, and dynamic fragmentation of materials; application to penetration mechanics and trajectory instabilities. The book gathers together selected papers based on work presented as invited lectures at the 2nd US-France symposium held on 28-30 May 2008 in Rocamadour, France. The conference was organized by Eric Buzaud (DGA, Centre d'Études de Gramat) under the auspices of the International Center for Applied Computational Mechanics (ICACM).

Download or read book Numerical Simulation of the Effect of Blast and Penetration on Reinforced Concrete Structures written by Andrea Mencarelli and published by . This book was released on 2010 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Concrete Structures Subjected to Impact and Blast Loadings and Their Combinations written by Chunwei Zhang and published by CRC Press. This book was released on 2022-05-08 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although much research focuses on investigating the responses of reinforced concrete (RC) structures under sole impact or blast loads, the responses of RC structures under a combination of impact and blast loads currently represent a gap in our knowledge. The combined actions of impact and blast loadings may be applied to RC structures during accidental or intentional collision of vessels, vehicles, etc., carrying explosive materials. A comprehensive study on the vulnerability of various structural members is carried out using finite element (FE) simulations under combination of impact and blast loads with the variations of various loading- and structural-related parameters and key parameters. This book introduces various structural analysis approaches for concrete structures when subjected to extreme loads such as impact and blast loadings. The theory of the combinations of impact and blast loads is proposed that can provide primary insights to the specific readers to develop new ideas in impact and blast engineering, including combined actions of extreme loads arising from real-world intentional or accidental events. This book will be of value to students (undergraduate or postgraduate), engineers, and researchers in structural and civil engineering, and specifically, those who are studying and investigating the performances of concrete structures under extreme loads.

Download or read book Lattice Discrete Particle Modeling of Reinforced Concrete written by Eric M. Domonell and published by . This book was released on 2011 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computational Methods and Experimental Measurements XIX Earthquake Resistant Engineering Structures XII written by P. De Wilde and published by WIT Press. This book was released on 2019-08-14 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of research originating from WIT Conferences on Computational Methods and Earthquake Resistant Engineering Structures. In its 19th year the CMEM conference continues to provide highest quality research which forms part 1 of this book. Part 2 includes leading research as presented at the 12th edition of the ERES conference.

Download or read book Computational Modelling of Concrete Structures written by Nenad Bicanic and published by CRC Press. This book was released on 2014-03-04 with total page 1108 pages. Available in PDF, EPUB and Kindle. Book excerpt: The EURO-C conference series (Split 1984, Zell am See 1990, Innsbruck 1994, Badgastein 1998, St Johann im Pongau 2003, Mayrhofen 2006, Schladming 2010, St Anton am Alberg 2014) brings together researchers and practising engineers concerned with theoretical, algorithmic and validation aspects associated with computational simulations of concrete and concrete structures. The conference reviews and discusses research advancements and the applicability and robustness of methods and models for reliable analysis of complex concrete, reinforced concrete and pre-stressed concrete structures in engineering practice. Conference topics and invited papers cover both computational mechanics and computational modelling aspects of the analysis and design of concrete and concrete structures: * Constitutive and Multiscale Modelling of Concrete * Advances in Computational Modelling * Time Dependent and Multiphysics Problems * Performance of Concrete Structures The book is of special interest to researchers in computational concrete mechanics, as well as industry experts in complex nonlinear simulations of concrete structures.

Download or read book Modelling and Analysis of Reinforced Concrete Structures for Dynamic Loading written by Christian Meyer and published by CISM International Centre for Mechanical Sciences. This book was released on 1998-07-09 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of the material behavior of concrete under dynamic loads, especially impact and impuls, opens the volume. It is followed by a summary of the various analytical tools available to engineers interested in analyzing the nonlinear behavior of reinforced concrete members for dynamic load. These range from relatively simple and practice-oriented push-over analysis to sophisticated layered finite element models. Important design-related topics are discussed, with special emphasis on performance of concrete frames subjected to seismic loads. The significance of modern software systems is recognized by including extensive examples. For readers not current in dynamic analysis methods, an appendix contains a review of the mathematical methods most commonly used for such analysis.

Download or read book State of the Art of Blast Loading and Penetration Simulation in Concrete Using the HULL Hydrocode written by John J. Osborn and published by . This book was released on 1989 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rock Dynamics and Applications 3 written by Charlie C. Li and published by CRC Press. This book was released on 2018-06-18 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Dynamics – Experiments, Theories and Applications is a collection of scientific and technical papers presented at the Third International Conference on Rock Dynamics and Applications (RocDyn-3, Trondheim, Norway, 26-27 June 2018). The papers in the book reflect the recent developments in experiment and theory as well as engineering applications of rock dynamics. Rock dynamics studies the response of rock and rock masses under dynamic loading and during the state transition from static loading to kinetic movement. It also includes the study of engineering countermeasures to dynamic instability of rock and rock masses. The topics in the book include: - Dynamic theories - Numerical simulation - Propagation of stress waves - Dynamic tests of rock - Stability of underground openings under dynamic loading - Rockburst - Seismic monitoring - Dynamic rock support - Blasting - Earthquake-related rock structure damage, etc. Applications, such as rockburst, dynamic rock support, seismic monitoring, blasting and earthquake-related rock structure damage, are paid special attention in Rock Dynamics – Experiments, Theories and Applications. The papers, from specialists both from mining and tunnelling branches, discuss commonly interested dynamic issues. Their experience and knowledge in the application of rock dynamics are extremely valuable for all academics, engineers and professionals who work with rock dynamics.

Download or read book FRP written by J. G. Teng and published by John Wiley & Sons. This book was released on 2002 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fibre-reinforced polymer (FRP) composites are used to strengthen reinforced concrete (RC) structures. A large amount of research now exists on this. This book brings together all existing research into one volume.

Download or read book Atomistic Simulation of Anistropic Crystal Structures at Nanoscale written by Jia Fu and published by BoD – Books on Demand. This book was released on 2019-05-10 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiscale simulations of atomistic/continuum coupling in computational materials science, where the scale expands from macro-/micro- to nanoscale, has become a hot research topic. These small units, usually nanostructures, are commonly anisotropic. The development of molecular modeling tools to describe and predict the mechanical properties of structures reveals an undeniable practical importance. Typical anisotropic structures (e.g. cubic, hexagonal, monoclinic) using DFT, MD, and atomic finite element methods are especially interesting, according to the modeling requirement of upscaling structures. It therefore connects nanoscale modeling and continuous patterns of deformation behavior by identifying relevant parameters from smaller to larger scales. These methodologies have the prospect of significant applications. I would like to recommend this book to both beginners and experienced researchers.

Download or read book Discrete Element Methods written by Benjamin K. Cook and published by . This book was released on 2002 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Third International Conference on Discrete Element Methods, held in Santa Fe, New Mexico on September 23-25, 2002. This Geotechnical Special Publication contains 72 technical papers on discrete element methods (DEM), a suite of numerical techniques developed to model granular materials, rock, and other discontinua at the grain scale. Topics include: DEM formulation and implementation approaches, coupled methods, experimental validation, and techniques, including three-dimensional particle representations, efficient contact detection algorithms, particle packing schemes, and code design. Coupled methods include approaches to linking solid continuum and fluid models with DEM to simulate multiscale and multiphase phenomena. Applications include fundamental investigations of granular mechanics; micromechanical studies of powder, soil, and rock behavior; and large-scale modeling of geotechnical, material processing, mining, and petroleum engineering problems.

Download or read book Performance Based Specifications and Control of Concrete Durability written by Hans Beushausen and published by Springer. This book was released on 2015-09-24 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work gives an overview of significant research from recent years concerning performance-based design and quality control for concrete durability and its implementation. In engineering practice, performance approaches are often still used in combination with prescriptive requirements. This is largely because, for most durability test methods, sufficient practical experience still has to be gained before engineers and owners are prepared to fully rely on them. This book, compiled by RILEM TC 230-PSC, is intended to assist efforts to successfully build the foundation for the full implementation of performance-based approaches through the exchange of relevant knowledge and experience between researchers and practitioners worldwide.

Download or read book Computational Structural Engineering written by Yong Yuan and published by Springer Science & Business Media. This book was released on 2009-06-05 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the great progress made in computing technology, both in computer and programming technology, computation has become one of the most powerful tools for researchers and practicing engineers. It has led to tremendous achievements in computer-based structural engineering and there is evidence that current devel- ments will even accelerate in the near future. To acknowledge this trend, Tongji University, Vienna University of Technology, and Chinese Academy of Engine- ing, co-organized the International Symposium on Computational Structural En- neering 2009 in Shanghai (CSE’09). CSE’09 aimed at providing a forum for presentation and discussion of sta- of-the-art development in scientific computing applied to engineering sciences. Emphasis was given to basic methodologies, scientific development and engine- ing applications. Therefore, it became a central academic activity of the Inter- tional Association for Computational Mechanics (IACM), the European Com- nity on Computational Methods in Applied Sciences (ECCOMAS), The Chinese Society of Theoretical and Applied Mechanic, the China Civil Engineering So- ety, and the Architectural Society of China. A total of 10 invited papers, and around 140 contributed papers were p- sented in the proceedings of the symposium. Contributors of papers came from 20 countries around the world and covered a wide spectrum related to the compu- tional structural engineering.

Download or read book Handbook for Blast Resistant Design of Buildings written by Donald O. Dusenberry and published by John Wiley & Sons. This book was released on 2010-01-26 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unique single reference supports functional and cost-efficient designs of blast resistant buildings Now there's a single reference to which architects, designers, and engineers can turn for guidance on all the key elements of the design of blast resistant buildings that satisfy the new ASCE Standard for Blast Protection of Buildings as well as other ASCE, ACI, and AISC codes. The Handbook for Blast Resistant Design of Buildings features contributions from some of the most knowledgeable and experienced consultants and researchers in blast resistant design. This handbook is organized into four parts: Part 1, Design Considerations, sets forth basic principles, examining general considerations in the design process; risk analysis and reduction; criteria for acceptable performance; materials performance under the extraordinary blast environment; and performance verification for technologies and solution methodologies. Part 2, Blast Phenomena and Loading, describes the explosion environment, loading functions needed for blast response analysis, and fragmentation and associated methods for effects analysis. Part 3, System Analysis and Design, explains the analysis and design considerations for structural, building envelope, component space, site perimeter, and building system designs. Part 4, Blast Resistant Detailing, addresses the use of concrete, steel, and masonry in new designs as well as retrofitting existing structures. As the demand for blast resistant buildings continues to grow, readers can turn to the Handbook for Blast Resistant Design of Buildings, a unique single source of information, to support competent, functional, and cost-efficient designs.

Download or read book Structural Design for Fire Safety written by Andrew H. Buchanan and published by John Wiley & Sons. This book was released on 2017-01-30 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Design for Fire Safety, 2nd edition Andrew H. Buchanan, University of Canterbury, New Zealand Anthony K. Abu, University of Canterbury, New Zealand A practical and informative guide to structural fire engineering This book presents a comprehensive overview of structural fire engineering. An update on the first edition, the book describes new developments in the past ten years, including advanced calculation methods and computer programs. Further additions include: calculation methods for membrane action in floor slabs exposed to fires; a chapter on composite steel-concrete construction; and case studies of structural collapses. The book begins with an introduction to fire safety in buildings, from fire growth and development to the devastating effects of severe fires on large building structures. Methods of calculating fire severity and fire resistance are then described in detail, together with both simple and advanced methods for assessing and designing for structural fire safety in buildings constructed from structural steel, reinforced concrete, or structural timber. Structural Design for Fire Safety, 2nd edition bridges the information gap between fire safety engineers, structural engineers and building officials, and it will be useful for many others including architects, code writers, building designers, and firefighters. Key features: • Updated references to current research, as well as new end-of-chapter questions and worked examples. •Authors experienced in teaching, researching, and applying structural fire engineering in real buildings. • A focus on basic principles rather than specific building code requirements, for an international audience. An essential guide for structural engineers who wish to improve their understanding of buildings exposed to severe fires and an ideal textbook for introductory or advanced courses in structural fire engineering.