Download or read book Simulation of Manufacturing Sequences of Functionally Graded Structures written by Tobias Gleim and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Simulation of Manufacturing Sequences of Functionally Graded Structures written by Gleim, Tobias and published by kassel university press GmbH. This book was released on 2017-02-10 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current paper establishes an axisymmetric model for an inductive heating process. Therein, the fully coupled MAXWELL equations, assuming a temperature dependent permeability, are combined with the non-linear heat conduction equation to yield a monolithic solution strategy. The latter is based on a consistent linearization together with a higher order finite element discretization using GALERKIN'S method in space. For the temporal discretization, the generalized Newmark-? methods, higher order RUNGE-KUTTA methods, and discontinuous and continuous GALERKIN methods are used. Furthermore, the residual error is introduced to open an alternative way to obtain a numerically efficient estimation of the time integration accuracy. Simulation results of the electric, magnetic and thermal fields are provided, together with parameter studies concerning spatial discretization, frequency dependence and penetration depth of the heating zone. Another topic analyzed is the residual error and its estimation quality regarding polynomial degree and time step size. A further aspect of this work is the investigation of the thermal fluid-structure interaction with respect to functionally graded materials. Different coupling strategies for the acceleration of the fixed-point iteration in each time step is in the foreground. Relaxation methods as well as extrapolation methods make it possible to significantly reduce the number of fixed point iterations. At the same time, an adaptive strategy with higher order RUNGE-KUTTA methods can provide a further advantage in combination with acceleration methods.
Download or read book Consistent Higher Order Accurate Time Discretization Methods for Inelastic Material Models written by Schröder, Bettina Anna Barbara and published by kassel university press GmbH. This book was released on 2020-01-20 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present thesis investigates the usage of higher order accurate time integrators together with appropriate error estimators for small and finite dynamic (visco)plasticity. Therefore, a general (visco)plastic problem is defined which serves as a basis to create closed-form solution strategies. A classical access towards small and finite (visco)plasticity is integrated into this concept. This approach is based on the idea, that the balance of linear momentum is formulated in a weak sense and the material laws are included indirectly. Thus, separate time discretizations are implemented and an appropriate coupling between them is necessary. Limitations for the usage of time integrators are the consequence. In contrast, an alternative multifield formulation is derived, adapting the principle of Jourdain. The idea is to assume that the balance of energy - taking into account a pseudopotential representing dissipative effects – resembles a rate-type functional, whose stationarity condition leads to the equations describing small or finite dynamic (visco)plasticity. Accordingly, the material laws and the balance of linear momentum can be solved on the same level and only one single time discretization has to be performed. A greater freedom in the choice of time integrators is obtained and the application of higher order accurate schemes - such as Newmark’s method, fully implicit as well as diagonally implicit Runge-Kutta schemes, and continuous as well as discontinuous Galerkin methods - is facilitated. An analysis and a comparison of the classical and the multifield formulation is accomplished by means of distinct examples. In this context, a dynamic benchmark problem is developed, which allows to focus on the effect of different time integrators. For this investigation, a variety of time discretization error estimators are formulated, evaluated, and compared.
Download or read book Functional and Advanced Materials written by Dwinanto Sukamto and published by Trans Tech Publications Ltd. This book was released on 2023-10-24 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer-reviewed papers only
Download or read book 7th International Conference on Recent Advances in Materials Minerals and Environment RAMM written by Khairunisak Abdul Razak and published by Trans Tech Publications Ltd. This book was released on 2024-05-21 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer-reviewed extended articles based on abstracts presented at the 7th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM2022) Aggregated Book
Download or read book Simulation of Manufacturing Sequences for Verification of Product Properties written by Mats Werke and published by . This book was released on 2009 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Smart Materials in Additive Manufacturing volume 2 4D Printing Mechanics Modeling and Advanced Engineering Applications written by Mahdi Bodaghi and published by Elsevier. This book was released on 2022-06-25 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Materials in Additive Manufacturing, Volume 2 covers the mechanics, modeling, and applications of the technology and the materials produced by it. It approaches the topic from an engineering design perspective with cutting-edge modeling techniques and real-world applications and case studies highlighted throughout. The book demonstrates 4D printing techniques for electro-induced shape memory polymers, pneumatic soft actuators, textiles, and more. Modeling techniques with ABAQUS and machine learning are outlined, as are manufacturing techniques for highly elastic skin, tunable RF and wireless structures and modules, and 4D printed structures with tunable mechanical properties. Closed-loop control of 4D printed hydrogel soft robots, hierarchical motion of 4D printed structures using the temperature memory effect, multimaterials 4D printing using a grasshopper plugin, shape reversible 4D printing, and variable stiffness 4D printing are each discussed as well. Outlines cutting-edge techniques, structural design, modeling, simulation, and tools for application-based 4D printing Details design, modeling, simulation, and manufacturing considerations for various fields Includes case studies demonstrating real-world situations where the techniques and concepts discussed were successfully deployed Applications covered include textiles, soft robotics, auxetics and metamaterials, micromachines, sensors, bioprinting, and wireless devices Covers the mechanics, manufacturing processes and applications of 4D-printed smart materials and structures Discusses applications in civil, mechanical, aerospace, polymer and biomedical engineering Presents experimental, numerical and analytical studies in a simple and straightforward manner, providing tools that can be immediately implemented and adapted by readers to fit their work
Download or read book Metal Based Functionally Graded Materials written by Jerzy Sobczak and published by Bentham Science Publishers. This book was released on 2009 with total page 79 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this Ebook is to provide a comprehensive overview of the basic production techniques for manufacturing of metal-based graded materials. A concise description of experimental methods and short analysis of some specific structures obtained are pr
Download or read book Innovative Developments in Design and Manufacturing written by J. N. Reddy and published by CRC Press. This book was released on 2009-09-22 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essential reading on the latest advances in virtual prototyping and rapid manufacturing. Includes 110 peer reviewed papers covering: 1. Biomanufacturing, 2. CAD and 3D data acquisition technologies, 3. Materials, 4. Rapid tooling and manufacturing, 5. Advanced rapid prototyping technologies and nanofabrication, 6. Virtual environments and
Download or read book Bio Locomotion Interfaces and Biologization Potential in 4 D Printing written by Abdel-Aal, Hisham A. and published by IGI Global. This book was released on 2024-08-29 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the evolving market of product design, the optimization of surface patterns is a crucial factor in determining the functionality of future products. However, despite numerous surface designs introduced in recent years, the field remains significantly underdeveloped. The absence of systematic and well-defined methodologies for generating deterministic topologies has turned the design of surfaces into more of an art than a precise science. This deficiency is further exacerbated by a dominant design culture that attempts to tame nature rather than establish harmonious coexistence within the Man Engineered Systems Domain (MESD). The challenge lies in the lack of a holistic surface design methodology that can merge function, form, and topography to produce optimized constructs capable of efficient operation within an envelope of constraints. Bio-Locomotion Interfaces and Biologization Potential in 4-D Printing is a comprehensive solution to the challenges faced in biomimetic surface design. This groundbreaking book recognizes the underdeveloped state of the field and proposes a trans-disciplinary approach that seamlessly integrates engineering, physics, and biology. It addresses the need for a new surface design methodology, emphasizing the importance of generating bio-inspired functional surfaces in MESD. Unlike existing approaches that rely on mere bio-mimicry, this book delves into the core of design generation, emphasizing the implementation of design rules rather than the replication of natural constructions. It is the ultimate guide for scholars seeking to bridge the gap between biology and engineering and acquire the methodologies needed to deduce design rules and construct deterministic surfaces inspired by bio-analogues.
Download or read book Fabricate 2024 written by Bob Sheil and published by UCL Press. This book was released on 2024-04-04 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fabricate 2024: Creating Resourceful Futures is the fifth volume in the series of Fabricate publications. The first conference – ‘Making Digital Architecture’ – explored the ways in which technology, design and industry are shaping the world around us. Since then, we have become finely attuned to the negative impacts of this shaping. The 2024 conference, hosted in Copenhagen, sets focus on the pressing need to develop new models for architectural production that rethink how resource is deployed, its intensity, its socio-ecological origins and sensitivity to environment. This book features the work of designers, engineers and makers operating within the built environment. It documents disruptive approaches that reconsider how fabrication can be leveraged to address our collective and entangled challenges of resource scarcity, climate emergency and burgeoning demand. Exploring case studies of completed buildings and works-in-progress, together with interviews with leading thinkers, this edition of Fabricate offers a plurality of tangible models for design and production that set a creative and responsible course towards resourceful futures.
Download or read book Design and Analysis of Functionally Graded Adhesively Bonded Joints of FRP Composites written by Sashi Kanta Panigrahi and published by CRC Press. This book was released on 2022-12-30 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides up-to-date information relevant to the analysis and design of adhesively bonded joints made up of fiber-reinforced polymer (FRP) composites using functionally graded adhesive (FGA). Damage behaviors in adhesively bonded joints of laminated FRP composites have been addressed, and joint configurations have been modeled using special finite elements (FEs) and multipoint constraint elements to simulate the contact behavior. Detailed 3D finite element analyses (FEAs) have been presented for different adhesively bonded joint structures along with guidelines for effective design philosophy of adhesively bonded joints in laminated FRP structures using FGA. Features: Provides a thorough and systematic discussion on the functionally graded adhesive and its joints. Discusses analytical modeling and numerical analyses of the joints. Details 3D stress and failure delamination analysis for composite analyses of functionally graded out-of-plane joints under various combinations of loading. Illustrates FE modeling and simulation of interfacial failure and damage propagation in out-of-plane joints. Includes the effect of various gradation function profiles on damage growth driving forces (SERR). This book is aimed at researchers, professionals and graduate students in composites, infrastructure engineering, bonding technology and mechanical/aerospace engineering.
Download or read book Advanced Composite Materials for Aerospace Engineering written by Sohel Rana and published by Woodhead Publishing. This book was released on 2016-04-26 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Composite Materials for Aerospace Engineering: Processing, Properties and Applications predominately focuses on the use of advanced composite materials in aerospace engineering. It discusses both the basic and advanced requirements of these materials for various applications in the aerospace sector, and includes discussions on all the main types of commercial composites that are reviewed and compared to those of metals. Various aspects, including the type of fibre, matrix, structure, properties, modeling, and testing are considered, as well as mechanical and structural behavior, along with recent developments. There are several new types of composite materials that have huge potential for various applications in the aerospace sector, including nanocomposites, multiscale and auxetic composites, and self-sensing and self-healing composites, each of which is discussed in detail. The book’s main strength is its coverage of all aspects of the topics, including materials, design, processing, properties, modeling and applications for both existing commercial composites and those currently under research or development. Valuable case studies provide relevant examples of various product designs to enhance learning. Contains contributions from leading experts in the field Provides a comprehensive resource on the use of advanced composite materials in the aerospace industry Discusses both existing commercial composite materials and those currently under research or development
Download or read book Experimental Characterization Predictive Mechanical and Thermal Modeling of Nanostructures and Their Polymer Composites written by Francesco Marotti De Sciarra and published by William Andrew. This book was released on 2018-03-23 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental Characterization, Predictive Mechanical and Thermal Modeling of Nanostructures and Their Polymer Composite focuses on the recent observations and predictions regarding the size-dependent mechanical properties, material properties and processing issues of carbon nanotubes (CNTs) and other nanostructured materials. The book takes various approaches, including dedicated characterization methods, theoretical approaches and computer simulations, providing a detailed examination of the fundamental mechanisms governing the deviations of the properties of CNTs and other nanostructured materials. The book explores their applications in materials science, mechanics, engineering, chemistry and physics due to their unique and appealing properties. The use of such materials is, however, still largely limited due to the difficulty in tuning their properties and morphological and structural features. Presents a thorough discussion on how to effectively model the properties of carbon nanotubes and their polymer nanocomposites Includes a size-dependent analysis of properties and multiscale modeling Outlines the fundamentals and procedures of computational modeling as it is applied to carbon nanotubes and other nanomaterials
Download or read book Interaction s Processes Structures written by Moussa Karama and published by Trans Tech Publications Ltd. This book was released on 2013-05-14 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS). This volume is a collecting scientific results of several researchers in the fields of prediction and handling of interactions between structure and process. Research programs have the primary objective analysis of the interactions between processes and structures in modern production facilities. This book presents the results of several interdisciplinary projects, focusing on different manufacturing processes such as high speed machining or metals forming. It contains experimental studies and mathematical modeling of production processes and the interactions of the machine. New advanced experimental and innovative simulation approaches are also included.
Download or read book Advances in Structural and Multidisciplinary Optimization written by Axel Schumacher and published by Springer. This book was released on 2017-12-04 with total page 2101 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume includes papers from the WSCMO conference in Braunschweig 2017 presenting research of all aspects of the optimal design of structures as well as multidisciplinary design optimization where the involved disciplines deal with the analysis of solids, fluids or other field problems. Also presented are practical applications of optimization methods and the corresponding software development in all branches of technology.
Download or read book Achievements and Trends in Material Forming written by Gabriela Vincze and published by Trans Tech Publications Ltd. This book was released on 2022-07-22 with total page 2429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Peer-reviewed extended papers selected from the 25th International Conference on Material Forming (ESAFORM 2022) Peer-reviewed extended papers selected from the 25th International Conference on Material Forming (ESAFORM 2022), April 27-29, 2022, Portugal
