Download or read book Simulation of Anisotropic Grain Growth by Ostwald Ripening written by and published by . This book was released on 1996 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this paper, a two-dimensional Potts model that can simulate anisotropic grain growth by Ostwald ripening in liquid-phase-sintered ceramics will be presented. The model defines a Wulff shape for the grains and allows each individual grain to grow in its local environment which is controlled by the solid/liquid interfacial energy, the spatial distribution of neighboring grains, area fraction of grains, wetting by and distribution of the liquid matrix, and the concentration gradients in the liquid. The results of this simulation technique will be presented with emphasis on the kinetics and grain shape evolution and will be compared to those of isotropic grain growth. Finally, the limitations of the Potts model in such microstructural evolution processes will be discussed.
Download or read book Simulation of Anistropic Grain Growth by Ostwald Ripening written by and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Microstructures written by Antoni P. Tomsia and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, titled Proceedings of the International Materials Symposium on Ce ramic Microstructures: Control at the Atomic Level summarizes the progress that has been achieved during the past decade in understanding and controlling microstructures in ceram ics. A particular emphasis of the symposium, and therefore of this volume, is advances in the characterization, understanding, and control of micro structures at the atomic or near-atomic level. This symposium is the fourth in a series of meetings, held every ten years, devoted to ceramic microstructures. The inaugural meeting took place in 1966, and focussed on the analysis, significance, and production of microstructure; the symposium emphasized the need for, and importance of characterization in achieving a more complete understanding of the physical and chemical characteristics of ceramics. A consensus emerged at that meeting on the critical importance of characterization in achieving a more complete understanding of ceramic properties. That point of view became widely accepted in the ensuing decade. The second meeting took place in 1976 at a time of world-wide energy shortages and thus emphasized energy-related applications of ceramics, and more specifically, microstructure-property relationships of those materials. The third meeting, held in 1986, was devoted to the role that interfaces played both during processing, and in influencing the ultimate properties of single and polyphase ceramics, and ceramic-metal systems.
Download or read book Sintering of Ceramics written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2007-07-06 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering of Ceramics provides the only comprehensive treatment of the theories and principles of sintering and their application to the production of advanced ceramics with the required target microstructure. Stemming from the author's bestselling text, Ceramic Processing and Sintering, this book includes additional material selected
Download or read book Proceedings of the III Advanced Ceramics and Applications Conference written by William E. Lee and published by Springer. This book was released on 2015-11-11 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the Proceedings of III Advanced Ceramics and Applications conference, held in Belgrade, Serbia in 2014. It contains 25 papers on various subjects regarding preparation, characterization and application of advanced ceramic materials.
Download or read book Ceramic Processing written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2017-07-12 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials scientists continue to develop stronger, more versatile ceramics for advanced technological applications, such as electronic components, fuel cells, engines, sensors, catalysts, superconductors, and space shuttles. From the start of the fabrication process to the final fabricated microstructure, Ceramic Processing covers all aspects of modern processing for polycrystalline ceramics. Stemming from chapters in the author's bestselling text, Ceramic Processing and Sintering, this book gathers additional information selected from many sources and review articles in a single, well-researched resource. The author outlines the most commonly employed ceramic fabrication processes by the consolidation and sintering of powders. A systematic approach highlights the importance of each step as well as the interconnection between the various steps in the overall fabrication route. The in-depth treatment of production methods includes powder, colloidal, and sol-gel processing as well as chemical synthesis of powders, forming, sintering, and microstructure control. The book covers powder preparation and characterization, organic additives in ceramic processing, mixing and packing of particles, drying, and debinding. It also describes recent technologies such as the synthesis of nanoscale powders and solid freeform fabrication. Ceramic Processing provides a thorough foundation and reference in the production of ceramic materials for advanced undergraduates and graduate students as well as professionals in corporate training or professional courses.
Download or read book Micromechanical Finite Element Simulations of Crack Propagation in Silicon Nitride written by Johannes Wippler and published by KIT Scientific Publishing. This book was released on 2014-07-28 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon nitride is used for challening applications like cutting inserts or forming rolls. The extreme strength and toughness of the material is achieved by an interaction between the microstructure and fracture behaviour on the microlevel. In order to understand these mechanisms, detailed unit cells have been defined and used for the determination of the effective fracture properties. The results have been used for the implementation of an effective continuum damage mechanics model.
Download or read book Comprehensive Nuclear Materials written by and published by Elsevier. This book was released on 2020-07-22 with total page 4871 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials in a nuclear environment are exposed to extreme conditions of radiation, temperature and/or corrosion, and in many cases the combination of these makes the material behavior very different from conventional materials. This is evident for the four major technological challenges the nuclear technology domain is facing currently: (i) long-term operation of existing Generation II nuclear power plants, (ii) the design of the next generation reactors (Generation IV), (iii) the construction of the ITER fusion reactor in Cadarache (France), (iv) and the intermediate and final disposal of nuclear waste. In order to address these challenges, engineers and designers need to know the properties of a wide variety of materials under these conditions and to understand the underlying processes affecting changes in their behavior, in order to assess their performance and to determine the limits of operation. Comprehensive Nuclear Materials, Second Edition, Seven Volume Set provides broad ranging, validated summaries of all the major topics in the field of nuclear material research for fission as well as fusion reactor systems. Attention is given to the fundamental scientific aspects of nuclear materials: fuel and structural materials for fission reactors, waste materials, and materials for fusion reactors. The articles are written at a level that allows undergraduate students to understand the material, while providing active researchers with a ready reference resource of information. Most of the chapters from the first Edition have been revised and updated and a significant number of new topics are covered in completely new material. During the ten years between the two editions, the challenge for applications of nuclear materials has been significantly impacted by world events, public awareness, and technological innovation. Materials play a key role as enablers of new technologies, and we trust that this new edition of Comprehensive Nuclear Materials has captured the key recent developments. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environments Comprehensive resource for up-to-date and authoritative information which is not always available elsewhere, even in journals Provides an in-depth treatment of materials modeling and simulation, with a specific focus on nuclear issues Serves as an excellent entry point for students and researchers new to the field
Download or read book Modeling and Numerical Simulation of Materials Behavior and Evolution Volume 731 written by Antonios Zavaliangos and published by . This book was released on 2002-08-09 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, numerical simulation and modeling of materials coupling multiple-length scales has received much attention. While challenges remain, significant advances have been made. An equally important area of materials modeling, one that has received much less attention, is the integration of multiple physical phenomena for simulation of complex materials behavior. This volume offers a review of current capabilities in materials modeling and simulation that (1) bridge length scales and time scales and (2) couple a variety of physical phenomena to either provide insight into fundamental aspects of materials structure or predict materials behavior. By bringing together the materials modeling community from around the world, the volume provides a current snapshot of the field. Topics include: multiscale modeling; mechanical properties; transport phenomena; phase transformations; microstructure and its evolution; atomistic modeling; and materials structure and properties.
Download or read book Handbook of Advanced Ceramics written by Shigeyuki Somiya and published by Academic Press. This book was released on 2003-09-17 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: A two-volume reference set for all ceramicists, both in research and working in industry The only definitive reference covering the entire field of advanced ceramics from fundamental science and processing to application Contributions from over 50 leading researchers from around the world This new Handbook will be an essential resource for ceramicists. It includes contributions from leading researchers around the world, and includes sections on: Basic Science of Advanced Ceramic, Functional Ceramics (electro-ceramics and optoelectro-ceramics) and engineering ceramics.Contributions from over 50 leading researchers from around the world
Download or read book Sintering written by Suk-Joong L. Kang and published by Elsevier. This book was released on 2004-11-27 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering is the process of forming materials and components from a powder under the action of thermal energy. It is a key materials science subject: most ceramic materials and many specialist metal powder products for use in key industries such as electronics, automotive and aerospace are formed this way. Written by one of the leading experts in the field, this book offers an unrivalled introduction to sintering and sintering processes for students of materials science and engineering, and practicing engineers in industry. The book is unique in providing a complete grounding in the principles of sintering and equal coverage of the three key sintering processes: densification, grain growth and microstructure. Students and professional engineers alike will be attracted by the emphasis on developing a detailed understanding of the theory and practical processes of sintering, the balanced coverage of ceramic and metal sintering, and the accompanying examination questions with selected solutions. - Delivering unrivalled depth of coverage on the basis of sintering, science, including thermodynamics and polycrystalline microstructure. - Unique in its balanced coverage of the three key sintering elements - densification, grain growth and microstructure. - A key reference for students and engineers in materials science and engineering, accompanied by examination questions and selected solutions.
Download or read book Computer Simulation of Grain Growth and Recrystallization Under Isotropic Conditions written by David Fleming Watson and published by . This book was released on 1974 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Grain Growth in Polycrystalline Materials written by G. Abbruzzese and published by . This book was released on 1992 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concise Encyclopedia of Materials Characterization written by R.W. Cahn and published by Elsevier. This book was released on 2016-01-22 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: To use materials effectively, their composition, degree of perfection, physical and mechanical characteristics, and microstructure must be accurately determined. This concise encyclopledia covers the wide range of characterization techniques necessary to achieve this. Articles included are not only concerned with the characterization techniques of specific materials such as polymers, metals, ceramics and semiconductors but also techniques which can be applied to materials in general. The techniques described cover bulk methods, and also a number of specific methods to study the topography and composition of surface and near-surface regions. These techniques range from the well-established and traditional to the very latest including: atomic force microscopy; confocal optical microscopy; gamma ray diffractometry; thermal wave imaging; x-ray diffraction and time-resolved techniques. This unique concise encyclopedia comprises 116 articles by leading experts in the field from around the world to create the ideal guide for materials scientists, chemists and engineers involved with any aspect of materials characterization. With over 540 illustrations, extensive cross-referencing, approximately 900 references, and a detailed index, this concise encyclopedia will be a valuable asset to any materials science collection.
Download or read book Ceramic Materials for Energy Applications II Volume 33 Issue 9 written by Kevin M. Fox and published by John Wiley & Sons. This book was released on 2012-11-29 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dedicated to the innovative design and use of ceramic materials for energy applications, this issue brings readers up to date with some of the most important research discoveries and new and emerging applications in the field. Contributions come from the proceedings of three symposia, as well as the European Union–USA Engineering Ceramics Summit. The three symposia are: Ceramics for Electric Energy Generation, Storage, and Distribution; Advanced Ceramics and Composites for Nuclear and Fusion Applications; and Advanced Materials and Technologies for Rechargeable Batteries. An abundance of charts, tables, and illustrations are included throughout.
Download or read book Proceedings of the 14th International Conference on the Technology of Plasticity Current Trends in the Technology of Plasticity written by Katia Mocellin and published by Springer Nature. This book was released on 2023-08-28 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of metal forming, as presented by leading international researchers and engineers at the 14th International Conference on Technology of Plasticity (ICTP), held in Mandelieu-La Napoule, France on September 24-29, 2023. It covers a diverse range of topics such as manufacturing processes & equipment, materials behavior and characterization, microstructure design by forming, surfaces & interfaces, control & optimization, green / sustainable metal forming technologies, digitalization & AI in metal forming, multi-material processing, agile / flexible metal forming processes, forming of non-metallic materials, micro-forming and luxury applications. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
Download or read book Deformation Mechanisms Rheology and Tectonics written by Siese de Meer and published by Geological Society of London. This book was released on 2002 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: The motion and deformation of rocks are processes of fundamental importance in shaping the Earth, from outer crustal layers to the deep mantle. Reconstructions of the evolution of the Earth therefore require detailed knowledge of the geometry of deformation structures and their relative timing, of the motions leading to deformation structures and of the mechanisms governing these motions. This volume contains a collection of 22 papers on field, experimental and theoretical studies that add to our knowledge of these processes.
