Download or read book Simulation and Modeling of Emerging Devices written by Brinda Bhowmick and published by Cambridge Scholars Publishing. This book was released on 2023-05-10 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the physical principles, modelling, fabrication and applications of Tunnel Field Effect Transistors (TFETs) and Fin Field Effect Transistors (FinFETs). This is intended to act as a reference for undergraduate, postgraduate and research scholars belonging to backgrounds of Applied Physics, Electrical and Electronics Engineering and Material Science. Of paramount importance is the need to understand the simulation aspects of these devices, the validity of mathematical models, basics on fabrication and details of applications of these nanoscale devices. The presentation of the book assumes that the reader has fundamental concepts of semiconductor device physics and electronic circuits. A course such as the one this book is intended to accompany and motivate both students and scholars to get involved in the research on TFETs and FinFETs. Further, this book can act as a reference for device engineers and scientists who need to get updated information on device and technological developments.

Download or read book Simulation and Modeling of Emerging Devices written by Brinda Bhowmick and published by . This book was released on 2023-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the physical principles, modelling, fabrication and applications of Tunnel Field Effect Transistors (TFETs) and Fin Field Effect Transistors (FinFETs). This is intended to act as a reference for undergraduate, postgraduate and research scholars belonging to backgrounds of Applied Physics, Electrical and Electronics Engineering and Material Science. Of paramount importance is the need to understand the simulation aspects of these devices, the validity of mathematical models, basics on fabrication and details of applications of these nanoscale devices. The presentation of the book assumes that the reader has fundamental concepts of semiconductor device physics and electronic circuits. A course such as the one this book is intended to accompany and motivate both students and scholars to get involved in the research on TFETs and FinFETs. Further, this book can act as a reference for device engineers and scientists who need to get updated information on device and technological developments.

Download or read book Introduction to Device Modeling and Circuit Simulation written by Tor A. Fjeldly and published by Wiley-Interscience. This book was released on 1998 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a useful reference for practicing electrical engineers as well as a textbook for a junior/senior or graduate level course in electrical engineering. The authors combine two subjects: device modeling and circuit simulation - by providing a large number of well-prepared examples of circuit simulations immediately following the description of many device models.

Download or read book Nanoscale Transistors written by Mark Lundstrom and published by Springer Science & Business Media. This book was released on 2006-06-18 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: To push MOSFETs to their scaling limits and to explore devices that may complement or even replace them at molecular scale, a clear understanding of device physics at nanometer scale is necessary. Nanoscale Transistors provides a description on the recent development of theory, modeling, and simulation of nanotransistors for electrical engineers, physicists, and chemists working on nanoscale devices. Simple physical pictures and semi-analytical models, which were validated by detailed numerical simulations, are provided for both evolutionary and revolutionary nanotransistors. After basic concepts are reviewed, the text summarizes the essentials of traditional semiconductor devices, digital circuits, and systems to supply a baseline against which new devices can be assessed. A nontraditional view of the MOSFET using concepts that are valid at nanoscale is developed and then applied to nanotube FET as an example of how to extend the concepts to revolutionary nanotransistors. This practical guide then explore the limits of devices by discussing conduction in single molecules

Download or read book Modeling Emerging Semiconductor Devices for Circuit Simulation written by Md Sakib Hasan and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Circuit simulation is an indispensable part of modern IC design. The significant cost of fabrication has driven researchers to verify the chip functionality through simulation before submitting the design for final fabrication. With the impending end of Moore,Äôs Law, researchers all over the world are looking for new devices with enhanced functionality. A plethora of promising emerging devices has been proposed in recent years. In order to leverage the full potential of such devices, circuit designers need fast, reliable models for SPICE simulation to explore different applications. Most of these new devices have complex underlying physical mechanism rendering the model development an extremely challenging task. For the models to be of practical use, they have to enable fast and accurate simulation that rules out the possibility of numerically solving a system of partial differential equations to arrive at a solution. In this chapter, we show how different modeling approaches can be used to simulate three emerging semiconductor devices namely, silicon- on- insulator four gate transistor(G4FET), perimeter gated single photon avalanche diode (PG-SPAD) and insulator-metal transistor (IMT) device with volatile memristance. All the models have been verified against experimental /TCAD data and implemented in commercial circuit simulator.

Download or read book Simulation of Semiconductor Devices and Processes written by Heiner Ryssel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: SISDEP ’95 provides an international forum for the presentation of state-of-the-art research and development results in the area of numerical process and device simulation. Continuously shrinking device dimensions, the use of new materials, and advanced processing steps in the manufacturing of semiconductor devices require new and improved software. The trend towards increasing complexity in structures and process technology demands advanced models describing all basic effects and sophisticated two and three dimensional tools for almost arbitrarily designed geometries. The book contains the latest results obtained by scientists from more than 20 countries on process simulation and modeling, simulation of process equipment, device modeling and simulation of novel devices, power semiconductors, and sensors, on device simulation and parameter extraction for circuit models, practical application of simulation, numerical methods, and software.

Download or read book Simulation of Semiconductor Devices and Processes written by Siegfried Selberherr and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "Fifth International Conference on Simulation of Semiconductor Devices and Processes" (SISDEP 93) continues a series of conferences which was initiated in 1984 by K. Board and D. R. J. Owen at the University College of Wales, Swansea, where it took place a second time in 1986. Its organization was succeeded by G. Baccarani and M. Rudan at the University of Bologna in 1988, and W. Fichtner and D. Aemmer at the Federal Institute of Technology in Zurich in 1991. This year the conference is held at the Technical University of Vienna, Austria, September 7 - 9, 1993. This conference shall provide an international forum for the presentation of out standing research and development results in the area of numerical process and de vice simulation. The miniaturization of today's semiconductor devices, the usage of new materials and advanced process steps in the development of new semiconduc tor technologies suggests the design of new computer programs. This trend towards more complex structures and increasingly sophisticated processes demands advanced simulators, such as fully three-dimensional tools for almost arbitrarily complicated geometries. With the increasing need for better models and improved understand ing of physical effects, the Conference on Simulation of Semiconductor Devices and Processes brings together the simulation community and the process- and device en gineers who need reliable numerical simulation tools for characterization, prediction, and development.

Download or read book NASA Space Technology Roadmaps and Priorities written by National Research Council and published by National Academies Press. This book was released on 2012-06-07 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: NASA's Office of the Chief Technologist (OCT) has begun to rebuild the advanced space technology program in the agency with plans laid out in 14 draft technology roadmaps. It has been years since NASA has had a vigorous, broad-based program in advanced space technology development and its technology base has been largely depleted. However, success in executing future NASA space missions will depend on advanced technology developments that should already be underway. Reaching out to involve the external technical community, the National Research Council (NRC) considered the 14 draft technology roadmaps prepared by OCT and ranked the top technical challenges and highest priority technologies that NASA should emphasize in the next 5 years. This report provides specific guidance and recommendations on how the effectiveness of the technology development program managed by OCT can be enhanced in the face of scarce resources.

Download or read book Silicon And Beyond Advanced Device Models And Circuit Simulators written by Tor A Fjeldly and published by World Scientific. This book was released on 2000-04-20 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: The steady downscaling of device-feature size combined with a rapid increase in circuit complexity as well as the introduction of new device concepts based on non-silicon-material systems poses great challenges for device and circuit designers. One of the major tasks is the development of new and improved device models needed for accurate device and circuit design. Another task is the development of new circuit-simulation tools to handle very large and complex circuits. This book addresses both these issues with up-to-date reviews written by leading experts in the field.The first three chapters of the book discuss advanced device models both for existing technologies and for new, emerging technologies. Among the topics covered are models for MOSFETs, thin-film transitors (TFTs), and compound semiconductor devices, including GaAs HEMTs and HFETs, heterodimensional devices, quantum-tunneling devices, as well as wide-bandgap devices. Chapters 4 and 5 discuss advanced circuit simulators that hold promise for handling circuits of much higher complexity than what is possible for typical state-of-the-art circuit simulators today.

Download or read book Compact Modeling written by Gennady Gildenblat and published by Springer Science & Business Media. This book was released on 2010-06-22 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most of the recent texts on compact modeling are limited to a particular class of semiconductor devices and do not provide comprehensive coverage of the field. Having a single comprehensive reference for the compact models of most commonly used semiconductor devices (both active and passive) represents a significant advantage for the reader. Indeed, several kinds of semiconductor devices are routinely encountered in a single IC design or in a single modeling support group. Compact Modeling includes mostly the material that after several years of IC design applications has been found both theoretically sound and practically significant. Assigning the individual chapters to the groups responsible for the definitive work on the subject assures the highest possible degree of expertise on each of the covered models.

Download or read book FinFET GAA Modeling for IC Simulation and Design written by Yogesh Singh Chauhan and published by Elsevier. This book was released on 2024-08-30 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: FinFET/GAA Modeling for IC Simulation and Design: Using the BSIM-CMG Standard, Second Edition is the first to book to explain FinFET modeling for IC simulation and the industry standard – BSIM-CMG - describing the rush in demand for advancing the technology from planar to 3D architecture as now enabled by the approved industry standard. The book gives a strong foundation on the physics and operation of FinFET, details aspects of the BSIM-CMG model such as surface potential, charge and current calculations, and includes a dedicated chapter on parameter extraction procedures, thus providing a step-by-step approach for the efficient extraction of model parameters. With this book, users will learn Why you should use FinFET, The physics and operation of FinFET Details of the FinFET standard model (BSIM-CMG), Parameter extraction in BSIM-CMG FinFET circuit design and simulation, and more. Authored by the lead inventor and developer of FinFET and developers of the BSIM-CMG standard model, providing an expert’s insight into the specifications of the standard A new edition of the original groundbreaking book on the industry-standard FinFET model—BSIM-CMG New to This Edition Includes a new chapter providing a comprehensive introduction to GAAFET, including motivations, device concepts, structure, benefits, and the industry standard GAAFET model Covers the most recent developments in the BSIM-CMG model Presents an updated RF modeling of FinFET using the BSIM-CMG model including parameter extraction Includes a new chapter on cryogenic modeling

Download or read book Mosfet Modeling For Vlsi Simulation Theory And Practice written by Narain Arora and published by World Scientific. This book was released on 2007-02-14 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: A reprint of the classic text, this book popularized compact modeling of electronic and semiconductor devices and components for college and graduate-school classrooms, and manufacturing engineering, over a decade ago. The first comprehensive book on MOS transistor compact modeling, it was the most cited among similar books in the area and remains the most frequently cited today. The coverage is device-physics based and continues to be relevant to the latest advances in MOS transistor modeling. This is also the only book that discusses in detail how to measure device model parameters required for circuit simulations.The book deals with the MOS Field Effect Transistor (MOSFET) models that are derived from basic semiconductor theory. Various models are developed, ranging from simple to more sophisticated models that take into account new physical effects observed in submicron transistors used in today's (1993) MOS VLSI technology. The assumptions used to arrive at the models are emphasized so that the accuracy of the models in describing the device characteristics are clearly understood. Due to the importance of designing reliable circuits, device reliability models are also covered. Understanding these models is essential when designing circuits for state-of-the-art MOS ICs.

Download or read book Nano Interconnects written by Afreen Khursheed and published by CRC Press. This book was released on 2021-12-23 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook comprehensively covers on-chip interconnect dimension and application of carbon nanomaterials for modeling VLSI interconnect and buffer circuits. It provides analysis of ultra-low power high speed nano-interconnects based on different facets such as material modeling, circuit modeling and the adoption of repeater insertion strategies and measurement techniques. It covers important topics including on-chip interconnects, interconnect modeling, electrical impedance modeling of on-chip interconnects, modeling of repeater buffer and variability analysis. Pedagogical features including solved problems and unsolved exercises are interspersed throughout the text for better understanding. Aimed at senior undergraduate and graduate students in the field of electrical engineering, electronics and communications engineering for courses on Advanced VLSI Interconnects/Advanced VLSI Design/VLSI Interconnects/VLSI Design Automation and Techniques, this book: Provides comprehensive coverage of fundamental concepts related to nanotube transistors and interconnects. Discusses properties and performance of practical nanotube devices and related applications. Covers physical and electrical phenomena of carbon nanotubes, as well as applications enabled by this nanotechnology. Discusses the structure, properties, and characteristics of graphene-based on-chip interconnect. Examines interconnect power and interconnect delay issues arising due to downscaling of device size.

Download or read book Simulation and Modeling of Submicron Semiconductor Devices by a New Hydrodynamic Method written by Qi Lin (Ph. D.) and published by . This book was released on 1994 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Simulation of Semiconductor Processes and Devices 2007 written by Tibor Grasser and published by Springer Science & Business Media. This book was released on 2007-09-18 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "Twelfth International Conference on Simulation of Semiconductor Processes and Devices" (SISPAD 2007) continues a long series of conferences and is held in September 2007 at the TU Wien, Vienna, Austria. The conference is the leading forum for Technology Computer-Aided Design (TCAD) held alternatingly in the United States, Japan, and Europe. The first SISPAD conference took place in Tokyo in 1996 as the successor to three preceding conferences NUPAD, VPAD, and SISDEP. With its longstanding history SISPAD provides a world-wide forum for the presentaƯ tion and discussion of outstanding recent advances and developments in the field of numerical process and device simulation. Driven by the ongoing miniaturization in semiconductor fabrication technology, the variety of topics discussed at this meeting reflects the ever-growing complexity of the subject. Apart from the classic topics like process, device, and interconnect simulation, mesh generation, a broad specƯ trum of numerical issues, and compact modeling, new simulation approaches like atomistic and first-principles methods have emerged as important fields of research and are currently making their way into standard TCAD suites

Download or read book Simulation of Semiconductor Processes and Devices 1998 written by Kristin De Meyer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the 1998 International Conference on Simulation of Semiconductor Processes and Devices and provides an open forum for the presentation of the latest results and trends in modeling and simulation of semiconductor equipment, processes and devices. Topics include: • semiconductor equipment simulation • process modeling and simulation • device modeling and simulation of complex structures • interconnect modeling • integrated systems for process, device, circuit simulation and optimisation • numerical methods and algorithms • compact modeling and parameter extraction • modeling for RF applications • simulation and modeling of new devices (heterojunction based, SET’s, quantum effect devices, laser based ...)

Download or read book Information Systems and the Environment written by National Academy of Engineering and published by National Academies Press. This book was released on 2001-09-13 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information technology is a powerful tool for meeting environmental objectives and promoting sustainable development. This collection of papers by leaders in industry, government, and academia explores how information technology can improve environmental performance by individual firms, collaborations among firms, and collaborations among firms, government agencies, and academia. Information systems can also be used by nonprofit organizations and the government to inform the public about broad environmental issues and environmental conditions in their neighborhoods. Several papers address the challenges to information management posed by the explosive increase in information and knowledge about environmental issues and potential solutions, including determining what information is environmentally relevant and how it can be used in decision making. In addition, case studies are described and show how industry is using information systems to ensure sustainable development and meet environmental standards. The book also includes examples from the public sector showing how governments use information knowledge systems to disseminate "best practices" beyond big firms to small businesses, and from the world of the Internet showing how knowledge is shared among environmental advocates and the general public.