Download or read book Simulation and Design of a Vector Control Scheme to Provide Torque Control for a Three Phase Induction Motor written by Derek N. Barboza and published by . This book was released on 1994 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Vector Control of Three Phase AC Machines written by Nguyen Phung Quang and published by Springer. This book was released on 2015-05-14 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the vector control of three-phase AC machines, in particular induction motors with squirrel-cage rotors (IM), permanent magnet synchronous motors (PMSM) and doubly-fed induction machines (DFIM), from a practical design and development perspective. The main focus is on the application of IM and PMSM in electrical drive systems, where field-orientated control has been successfully established in practice. It also discusses the use of grid-voltage oriented control of DFIMs in wind power plants. This second, enlarged edition includes new insights into flatness-based nonlinear control of IM, PMSM and DFIM. The book is useful for practitioners as well as development engineers and designers in the area of electrical drives and wind-power technology. It is a valuable resource for researchers and students.

Download or read book Vector Control of Induction Machines written by Benoît Robyns and published by Springer Science & Business Media. This book was released on 2012-02-04 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a brief introduction to the main law of physics and fundamental concepts inherent in electromechanical conversion, Vector Control of Induction Machines introduces the standard mathematical models for induction machines – whichever rotor technology is used – as well as several squirrel-cage induction machine vector-control strategies. The use of causal ordering graphs allows systematization of the design stage, as well as standardization of the structure of control devices. Vector Control of Induction Machines suggests a unique approach aimed at reducing parameter sensitivity for vector controls based on a theoretical analysis of this sensitivity. This analysis naturally leads to the introduction of control strategies that are based on the combination of different controls with different robustness properties, through the use of fuzzy logic supervisors. Numerous applications and experiments confirm the validity of this simple solution, which is both reproducible and applicable to other complex systems. Vector Control of Induction Machines is written for researchers and postgraduate students in electrical engineering and motor drive design.

Download or read book The Field Orientation Principle in Control of Induction Motors written by Andrzej Trzynadlowski and published by Springer Science & Business Media. This book was released on 1993-12-31 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Field Orientation Principle (FOP) constitutes a fundamental concept behind the modern technology of high-performance, vector-controlled drive systems with AC motors. The recent intense interest in these systems has been spawned by the widespread transition from DC to AC drives in industry. Induction motors, industry's traditional workhorses, are particularly well suited for FOP-based vector control. The Field Orientation Principle in Control of Induction Motors presents the FOP in a simple, easy-to-understand framework based on the space-vector dynamic model of the induction machine. Relationships between the classic phasor equivalent circuits of the motor and their vector counterparts are highlighted. A step-by-step derivation of dynamic equations of the motor provides a formal background for explanation of the basic approaches to vector control. In addition, the author presents scalar control methods for low-performance drives as an intermediate stage between uncontrolled and high-performance drives. The reader will also find a full chapter devoted to power inverters, which constitute an important component of adjustable speed AC drive systems, and a review of associated issues such as observers of motor variables, parameter estimation, adaptive tuning, and principles of the position and speed control of field-oriented induction motors. With a wealth of numerical examples and computer simulations illustrating the ideas and techniques discussed and an extensive bibliography, The Field Orientation Principle in Control of Induction Motors is a practical resource and valuable reference for researchers and students interested in motor control, power and industrial electronics, and control theory.

Download or read book Vector Control of AC Drives written by Ion Boldea and published by CRC Press. This book was released on 2017-11-22 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alternating current (AC) induction and synchronous machines are frequently used in variable speed drives with applications ranging from computer peripherals, robotics, and machine tools to railway traction, ship propulsion, and rolling mills. The notable impact of vector control of AC drives on most traditional and new technologies, the multitude of practical configurations proposed, and the absence of books treating this subject as a whole with a unified approach were the driving forces behind the creation of this book. Vector Control of AC Drives examines the remarkable progress achieved worldwide in vector control from its introduction in 1969 to the current technology. The book unifies the treatment of vector control of induction and synchronous motor drives using the concepts of general flux orientation and the feed-forward (indirect) and feedback (direct) voltage and current vector control. The concept of torque vector control is also introduced and applied to all AC motors. AC models for drive applications developed in complex variables (space phasors), both for induction and synchronous motors, are used throughout the book. Numerous practical implementations of vector control are described in considerable detail, followed by representative digital simulations and test results taken from the recent literature. Vector Control of AC Drives will be a welcome addition to the reference collections of electrical and mechanical engineers involved with machine and system design.

Download or read book Simulation of Three phase Induction Motor Control Using Fuzzy Logic Controller written by Omar Said Algayash Bennanes and published by . This book was released on 2004 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fuzzy logic controller has been developed and simluated on an indirect vector control of an induction motor (IVCIM) drive system. The objective of the indirect vector control is to convert the three-phase induction motor into a linear device where the torque and the flux in the motor can be controlled independently. The induction motor is fed by a current-controlled PWM inverter. The proposed fuzzy speed controller block in a vector controlled drive system observes the pattern of the speed loop error signal and correspondingly updates its output, so that the actual speed matches the command speeds. The design of the fuzzy controller starts with identifying the inputs, performing the membership functions for the two inputs of the FLC and ends at manipulating the final command signal to the current regulator which triggers the inverter. The fuzzy logic toolbox has been used to build the fuzzy inference system (FIS) which is the dynamo of the fuzzy logic controller. The proposed FLC controller has been designed to meet the speed tracking requirements under a step change in speed and load changes. The proposed FLC drive dynamic performance has been investigated and tested under different operating conditions by simulation in the Simuling/Matlab software environment. In order to prove the superiority of the FLC, a conventional PI controller based IM drive system has also been simulated. The simulation results obtained have proved the very good performance and robustness of the proposed FLC. It is concluded that the proposed fuzzy logic controller has shown superior performances over the conventional PI controller.

Download or read book High Performance Control of AC Drives with Matlab Simulink written by Haitham Abu-Rub and published by John Wiley & Sons. This book was released on 2021-05-11 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Performance Control of AC Drives with Matlab®/Simulink Explore this indispensable update to a popular graduate text on electric drive techniques and the latest converters used in industry The Second Edition of High Performance Control of AC Drives with Matlab®/Simulink delivers an updated and thorough overview of topics central to the understanding of AC motor drive systems. The book includes new material on medium voltage drives, covering state-of-the-art technologies and challenges in the industrial drive system, as well as their components, and control, current source inverter-based drives, PWM techniques for multilevel inverters, and low switching frequency modulation for voltage source inverters. This book covers three-phase and multiphase (more than three-phase) motor drives including their control and practical problems faced in the field (e.g., adding LC filters in the output of a feeding converter), are considered. The new edition contains links to Matlab®/Simulink models and PowerPoint slides ideal for teaching and understanding the material contained within the book. Readers will also benefit from the inclusion of: A thorough introduction to high performance drives, including the challenges and requirements for electric drives and medium voltage industrial applications An exploration of mathematical and simulation models of AC machines, including DC motors and squirrel cage induction motors A treatment of pulse width modulation of power electronic DC-AC converter, including the classification of PWM schemes for voltage source and current source inverters Examinations of harmonic injection PWM and field-oriented control of AC machines Voltage source and current source inverter-fed drives and their control Modelling and control of multiphase motor drive system Supported with a companion website hosting online resources. Perfect for senior undergraduate, MSc and PhD students in power electronics and electric drives, High Performance Control of AC Drives with Matlab®/Simulink will also earn a place in the libraries of researchers working in the field of AC motor drives and power electronics engineers in industry.

Download or read book Proceeding of the 3rd International Conference on Electronics Biomedical Engineering and Health Informatics written by Triwiyanto Triwiyanto and published by Springer Nature. This book was released on 2023-05-31 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents high-quality peer-reviewed papers from the International Conference on Electronics, Biomedical Engineering, and Health Informatics (ICEBEHI) 2022 held at Surabaya, Indonesia, virtually. The contents are broadly divided into three parts: (a) Electronics, (b) Biomedical Engineering, and (c) Health Informatics. The major focus is on emerging technologies and their applications in the domain of biomedical engineering. It includes papers based on original theoretical, practical, and experimental simulations, development, applications, measurements, and testing. Featuring the latest advances in the field of biomedical engineering applications, this book serves as a definitive reference resource for researchers, professors, and practitioners interested in exploring advanced techniques in the fields of electronics, biomedical engineering, and health informatics. The applications and solutions discussed here provide excellent reference material for future product development.

Download or read book Vector Control of Induction Motor Using MATLAB written by Langsi Yao and published by LAP Lambert Academic Publishing. This book was released on 2012-05 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, vector control of induction motor drives are increasingly employed in industrial drive systems, motor works on best performance at certain voltage and frequency for certain loads. This project describes a generalized model of the three-phase induction motor by using vector control method and its computer simulation using MATLAB/SIMULINK, it presents the advances made in vector control as applied to high performance AC motor drives. By using this application, it can achieve speed control by controlling the reference speed value and torque value to keep the electromagnetic torque at a constant value. Machine models in d-q representation, implementation issues with AC induction motor, inverters and converters, parameter effects for induction motor vector control are dealt with and simulation results from the project are presented and discussed by computational calculation and graphs to support this theory. The large scope in this model can lead the algorithm designers to direct their efforts to the promising areas and avoid impossible tasks. From this project, the readers can approximately understand the principle of vector control in three-phase AC induction motor drive.

Download or read book Induction Motor Control Design written by Riccardo Marino and published by Springer Science & Business Media. This book was released on 2010-08-20 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the most important steps and concerns in the design of estimation and control algorithms for induction motors. A single notation and modern nonlinear control terminology is used to make the book accessible, although a more theoretical control viewpoint is also given. Focusing on the induction motor with, the concepts of stability and nonlinear control theory given in appendices, this book covers: speed sensorless control; design of adaptive observers and parameter estimators; a discussion of nonlinear adaptive controls containing parameter estimation algorithms; and comparative simulations of different control algorithms. The book sets out basic assumptions, structural properties, modelling, state feedback control and estimation algorithms, then moves to more complex output feedback control algorithms, based on stator current measurements, and modelling for speed sensorless control. The induction motor exhibits many typical and unavoidable nonlinear features.

Download or read book Proceedings of the International Conference on Applications of Machine Intelligence and Data Analytics ICAMIDA 2022 written by Sharvari Tamane and published by Springer Nature. This book was released on 2023-05-01 with total page 1027 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an open access book. As on date, huge volumes of data are being generated through sensors, satellites, and simulators. Modern research on data analytics and its applications reveal that several algorithms are being designed and developed to process these datasets, either through the use of sequential and parallel processes. In the current scenario of Industry 4.0, data analytics, artificial intelligence and machine learning are being used to support decisions in space and time. Further, the availability of Graphical Processing Units (GPUs) and Tensor Processing Units (TPUs) have enabled to processing of these datasets. Some of the applications of Artificial Intelligence, Machine Learning and Data Analytics are in the domains of Agriculture, Climate Change, Disaster Prediction, Automation in Manufacturing, Intelligent Transportation Systems, Health Care, Retail, Stock Market, Fashion Design, etc. The international conference on Applications of Machine Intelligence and Data Analytics aims to bring together faculty members, researchers, scientists, and industry people on a common platform to exchange ideas, algorithms, knowledge based on processing hardware and their respective application programming interfaces (APIs).

Download or read book Induction Motors Recent Advances New Perspectives and Applications written by Adel El-Shahat and published by BoD – Books on Demand. This book was released on 2023-09-13 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The induction motor is one of the most significant innovations in contemporary history and it officially kicked off the Second Industrial Revolution by significantly enhancing energy generation efficiency. Induction motors are utilized in a wide variety of applications in the modern industrial world. Motivated by the importance of recent advances, new perspectives, and applications of induction motors, this book presents research from distinguished experts in the field. It addresses recent advances in induction motors, optimal solutions in field-oriented control, the association of converters to induction motors, dynamic analysis, optimized design of synergetic control, fault-tolerant control, mathematical modeling, an adaptive system scheme for a sensorless drive, modeling, and simulation of a system with inter-turn faults, sensorless speed observer for industrial drives, and induction motor applications in electric vehicles. This book is useful for undergraduates, graduate students, researchers, professors, and field engineers due to its combination of both theoretical coverage and real-world application concepts.

Download or read book Torque Control written by Moulay Tahar Lamchich and published by BoD – Books on Demand. This book was released on 2011-02-10 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the result of inspirations and contributions from many researchers, a collection of 9 works, which are, in majority, focalised around the Direct Torque Control and may be comprised of three sections: different techniques for the control of asynchronous motors and double feed or double star induction machines, oriented approach of recent developments relating to the control of the Permanent Magnet Synchronous Motors, and special controller design and torque control of switched reluctance machine.

Download or read book Intelligent Robotics and Applications written by Honghai Liu and published by Springer. This book was released on 2015-08-19 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three volume set LNAI 9244, 9245, and 9246 constitutes the refereed proceedings of the 8th International Conference on Intelligent Robotics and Applications, ICIRA 2015, held in Portsmouth, UK, in August 2015. The 46 papers included in the third volume are organized in topical sections on mobile robots and intelligent autonomous systems; intelligent system and cybernetics; robot mechanism and design; robotic vision; recognition and reconstruction; and active control in tunneling boring machine.

Download or read book Practical Control of Electric Machines written by Rubén Molina Llorente and published by Springer Nature. This book was released on 2020-03-20 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents deep analysis of machine control for different applications, focusing on its implementation in embedded systems. Necessary peripherals for various microcontroller families are analysed for machine control and software architecture patterns for high-quality software development processes in motor control units are described. Abundant figures help the reader to understand the theoretical, simulation and practical implementation stages of machine control. Model-based design, used as a mathematical and visual approach to construction of complex control algorithms, code generation that eliminates hand-coding errors, and co-simulation tools such as Simulink, PSIM and finite element analysis are discussed. The simulation and verification tools refine, and retest the models without having to resort to prototype construction. The book shows how a voltage source inverter can be designed with tricks, protection elements, and space vector modulation. Practical Control of Electric Machines: Model-Based Design and Simulation is based on the author’s experience of a wide variety of systems in domestic, automotive and industrial environments, and most examples have implemented and verified controls. The text is ideal for readers looking for an insight into how electric machines play an important role in most real-life applications of control. Practitioners and students preparing for a career in control design applied in electric machines will benefit from the book’s easily understood theoretical approach to complex machine control. The book contains mathematics appropriate to various levels of experience, from the student to the academic and the experienced professional. Advances in Industrial Control reports and encourages the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.

Download or read book System Dynamics written by Ernest Doebelin and published by CRC Press. This book was released on 1998-02-10 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing topics from system elements and simple first- and second-order systems to complex lumped- and distributed-parameter models of practical machines and processes, this work details the utility of systems dynamics for the analysis and design of mechanical, fluid, thermal and mixed engineering systems. It emphasizes digital simulation and int

Download or read book Advances of Science and Technology written by Mulatu Liyew Berihun and published by Springer Nature. This book was released on 2022-01-01 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set of LNICST 411 and 412 constitutes the refereed post-conference proceedings of the 9th International Conference on Advancement of Science and Technology, ICAST 2021, which took place in August 2021. Due to COVID-19 pandemic the conference was held virtually. The 80 revised full papers were carefully reviewed and selected from 202 submissions. The papers present economic and technologic developments in modern societies in 7 tracks: Chemical, Food and Bioprocess Engineering; Electrical and Electronics Engineering; ICT, Software and Hardware Engineering; Civil, Water Resources, and Environmental Engineering ICT; Mechanical and Industrial Engineering; Material Science and Engineering; Energy Science, Engineering and Policy.