Download or read book Silicon Carbide Growth by High Temperature CVD Techniques written by Alexandre Ellison and published by . This book was released on 1999 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Silicon Carbide Technology written by Tsunenobu Kimoto and published by John Wiley & Sons. This book was released on 2014-09-23 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction and up-to-date reference to SiC power semiconductor devices covering topics from material properties to applications Based on a number of breakthroughs in SiC material science and fabrication technology in the 1980s and 1990s, the first SiC Schottky barrier diodes (SBDs) were released as commercial products in 2001. The SiC SBD market has grown significantly since that time, and SBDs are now used in a variety of power systems, particularly switch-mode power supplies and motor controls. SiC power MOSFETs entered commercial production in 2011, providing rugged, high-efficiency switches for high-frequency power systems. In this wide-ranging book, the authors draw on their considerable experience to present both an introduction to SiC materials, devices, and applications and an in-depth reference for scientists and engineers working in this fast-moving field. Fundamentals of Silicon Carbide Technology covers basic properties of SiC materials, processing technology, theory and analysis of practical devices, and an overview of the most important systems applications. Specifically included are: A complete discussion of SiC material properties, bulk crystal growth, epitaxial growth, device fabrication technology, and characterization techniques. Device physics and operating equations for Schottky diodes, pin diodes, JBS/MPS diodes, JFETs, MOSFETs, BJTs, IGBTs, and thyristors. A survey of power electronics applications, including switch-mode power supplies, motor drives, power converters for electric vehicles, and converters for renewable energy sources. Coverage of special applications, including microwave devices, high-temperature electronics, and rugged sensors. Fully illustrated throughout, the text is written by recognized experts with over 45 years of combined experience in SiC research and development. This book is intended for graduate students and researchers in crystal growth, material science, and semiconductor device technology. The book is also useful for design engineers, application engineers, and product managers in areas such as power supplies, converter and inverter design, electric vehicle technology, high-temperature electronics, sensors, and smart grid technology.
Download or read book Silicon Carbide a High Temperature Semiconductor written by Joseph R. O'Connor and published by . This book was released on 1960 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CVD growth of SiC for high power and high frequency applications written by Robin Karhu and published by Linköping University Electronic Press. This book was released on 2019-02-14 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Carbide (SiC) is a wide bandgap semiconductor that has attracted a lot of interest for electronic applications due to its high thermal conductivity, high saturation electron drift velocity and high critical electric field strength. In recent years commercial SiC devices have started to make their way into high and medium voltage applications. Despite the advancements in SiC growth over the years, several issues remain. One of these issues is that the bulk grown SiC wafers are not suitable for electronic applications due to the high background doping and high density of basal plane dislocations (BPD). Due to these problems SiC for electronic devices must be grown by homoepitaxy. The epitaxial growth is performed in chemical vapor deposition (CVD) reactors. In this work, growth has been performed in a horizontal hot-wall CVD (HWCVD) reactor. In these reactors it is possible to produce high-quality SiC epitaxial layers within a wide range of doping, both n- and p-type. SiC is a well-known example of polytypism, where the different polytypes exist as different stacking sequences of the Si-C bilayers. Polytypism makes polytype stability a problem during growth of SiC. To maintain polytype stability during homoepitaxy of the hexagonal polytypes the substrates are usually cut so that the angle between the surface normal and the c-axis is a few degrees, typically 4 or 8°. The off-cut creates a high density of micro-steps at the surface. These steps allow for the replication of the substrates polytype into the growing epitaxial layer, the growth will take place in a step-flow manner. However, there are some drawbacks with step-flow growth. One is that BPDs can replicate from the substrate into the epitaxial layer. Another problem is that 4H-SiC is often used as a substrate for growth of GaN epitaxial layers. The epitaxial growth of GaN has been developed on on-axis substrates (surface normal coincides with c-axis), so epitaxial 4H-SiC layers grown on off-axis substrates cannot be used as substrates for GaN epitaxial growth. In efforts to solve the problems with off-axis homoepitaxy of 4H-SiC, on-axis homoepitaxy has been developed. In this work, further development of wafer-scale on-axis homoepitaxy has been made. This development has been made on a Si-face of 4H-SiC substrates. The advances include highly resistive epilayers grown on on-axis substrates. In this thesis the ability to control the surface morphology of epitaxial layers grown on on-axis homoepitaxy is demonstrated. This work also includes growth of isotopically enriched 4H-SiC on on-axis substrates, this has been done to increase the thermal conductivity of the grown epitaxial layers. In (paper 1) on-axis homoepitaxy of 4H-SiC has been developed on 100 mm diameter substrates. This paper also contains comparisons between different precursors. In (paper 2) we have further developed on-axis homoepitaxy on 100 mm diameter wafers, by doping the epitaxial layers with vanadium. The vanadium doping of the epitaxial layers makes the layers highly resistive and thus suitable to use as a substrate for III-nitride growth. In (paper 3) we developed a method to control the surface morphology and reduce the as-grown surface roughness in samples grown on on-axis substrates. In (paper 4) we have increased the thermal conductivity of 4H-SiC epitaxial layers by growing the layers using isotopically enriched precursors. In (paper 5) we have investigated the role chlorine have in homoepitaxial growth of 4H-SiC. In (paper 6) we have investigated the charge carrier lifetime in as-grown samples and traced variations in lifetime to structural defects in the substrate. In (paper 7) we have investigated the formation mechanism of a morphological defect in homoepitaxial grown 4H-SiC.
Download or read book Silicon Carbide Ceramics 1 written by S. Somiya and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discovered by Edward G. Acheson about 1890, silicon carbide is one of the oldest materials and also a new material. It occurs naturally in meteorites, but in very small amounts and is not in a useable state as an industrial material. For industrial require ments, large amounts of silicon carbide must be synthesized by solid state reactions at high temperatures. Silicon carbide has been used for grinding and as an abrasive material since its discovery. During World War II, silicon carbide was used as a heating element; however, it was difficult to obtain high density sintered silicon carbide bodies. In 1974, S. Prochazka reported that the addition of small amounts of boron compounds and carbide were effective in the sintering process to obtain high density. It was then possible to produce high density sintered bodies by pressureless sintering methods in ordinary atmosphere. Since this development, silicon carbide has received great attention as one of the high temperature structural ceramic materials. Since the 1970s, many research papers have appeared which report studies of silicon carbide and silicon nitride for structural ceramics.
Download or read book Selective Epitaxial Growth of Silicon Carbide on Silicon by Low Temperature Chemical Vapor Deposition written by Ying Gao and published by . This book was released on 1997 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Silicon Carbide Materials and Devices written by Zhe Chuan Feng and published by CRC Press. This book was released on 2023-07-10 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook presents the key properties of silicon carbide (SiC), the power semiconductor for the 21st century. It describes related technologies, reports the rapid developments and achievements in recent years, and discusses the remaining challenging issues in the field. The book consists of 15 chapters, beginning with a chapter by Professor W. J. Choyke, the leading authority in the field, and is divided into four sections. The topics include presolar SiC history, vapor-liquid-solid growth, spectroscopic investigations of 3C-SiC/Si, developments and challenges in the 21st century; CVD principles and techniques, homoepitaxy of 4H-SiC, cubic SiC grown on 4H-SiC, SiC thermal oxidation processes and MOS interface, Raman scattering, NIR luminescent studies, Mueller matrix ellipsometry, Raman microscopy and imaging, 4H-SiC UV photodiodes, radiation detectors, and short wavelength and synchrotron X-ray diffraction. This comprehensive work provides a strong contribution to the engineering, materials, and basic science knowledge of the 21st century, and will be of interest to material growers, designers, engineers, scientists, postgraduate students, and entrepreneurs.
Download or read book A Unique High temperature High pressure Crystal Growth System for Silicon Carbide written by J. R. Littler and published by . This book was released on 1973 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: A high-pressure, high-temperature furnace system is described for crystal growth experiments using crucibles up to 13 cm in diameter and 26 cm high. The vertical temperature gradient is electronically controlled during growth such that the ends of the crucible can be maintained at temperatures above or below the crucible center. Temperatures up to 2800C can be maintained at pressures up to 50 atmospheres. A vacuum capability up to .000001 torr at 1800C has been incorporated into the system. Single crystals of alpha silicon carbide grown in this system at 2600C are described to illustrate its use. (Author).
Download or read book Epitaxial Growth and Optoelectronic Characterization of Cubic Silicon Carbide Deposited Using Chemical Vapor Deposition on Porous Silicon written by Frederick Paul Vaccaro and published by . This book was released on 1999 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: ABSTRACT: Cubic silicon carbide is a promising material for applications in high-power, high-frequency, high-temperature, and high-speed electronic devices. Fourier Transform Infrared Spectroscopy (FTIR), Secondary Ion Mass Spectrometry (SIMS), X-Ray Diffraction (XRD) and Atomic Force Microscopy (AFM) evaluations performed on thin films grown heteroepitaxially on porous (i.e. anodized) silicon using a new chemical vapor deposition (CVD) method employing trimethylsilane confirmed that the thin films were stoichiometric, cubic silicon carbide (3C-SiC). Conclusions were drawn on the basis of comparisons with published standards as well as with results generated on reference materials. SIMS profiles revealed the growth rates at approximately 1150̊C to vary from 2.1 to 4.0 Å/min. depending upon the slight variations in the CVD process trimethylsilane gas pressure. AFM evaluations revealed that the deposition mode at short deposition times was homo-oriented island nucleation and growth but that the 3C-SiC thin films evolved into continuous terraced layers at longer deposition times. Heterojunction (pn) junction diodes, fabricated from CVD and chemical vapor converted (CVC) porous silicon specimens, displayed world record breakdown voltages as high as 140 volts and 150 volts respectively. Historically, heterojunction (pn) junction diodes fabricated from 3C-SiC thin film specimens deposited on non-anodized displayed breakdown voltages below 10 to 20 volts.
Download or read book Fundamentals of Silicon Carbide Technology written by Tsunenobu Kimoto and published by John Wiley & Sons. This book was released on 2014-11-24 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction and up-to-date reference to SiC power semiconductor devices covering topics from material properties to applications Based on a number of breakthroughs in SiC material science and fabrication technology in the 1980s and 1990s, the first SiC Schottky barrier diodes (SBDs) were released as commercial products in 2001. The SiC SBD market has grown significantly since that time, and SBDs are now used in a variety of power systems, particularly switch-mode power supplies and motor controls. SiC power MOSFETs entered commercial production in 2011, providing rugged, high-efficiency switches for high-frequency power systems. In this wide-ranging book, the authors draw on their considerable experience to present both an introduction to SiC materials, devices, and applications and an in-depth reference for scientists and engineers working in this fast-moving field. Fundamentals of Silicon Carbide Technology covers basic properties of SiC materials, processing technology, theory and analysis of practical devices, and an overview of the most important systems applications. Specifically included are: A complete discussion of SiC material properties, bulk crystal growth, epitaxial growth, device fabrication technology, and characterization techniques. Device physics and operating equations for Schottky diodes, pin diodes, JBS/MPS diodes, JFETs, MOSFETs, BJTs, IGBTs, and thyristors. A survey of power electronics applications, including switch-mode power supplies, motor drives, power converters for electric vehicles, and converters for renewable energy sources. Coverage of special applications, including microwave devices, high-temperature electronics, and rugged sensors. Fully illustrated throughout, the text is written by recognized experts with over 45 years of combined experience in SiC research and development. This book is intended for graduate students and researchers in crystal growth, material science, and semiconductor device technology. The book is also useful for design engineers, application engineers, and product managers in areas such as power supplies, converter and inverter design, electric vehicle technology, high-temperature electronics, sensors, and smart grid technology.
Download or read book Advances in Silicon Carbide Processing and Applications written by Stephen E. Saddow and published by Artech House. This book was released on 2004 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn the latest advances in SiC (Silicon Carbide) technology from the leading experts in the field with this new cutting-edge resource. The book is your single source for in-depth information on both SiC device fabrication and system-level applications. This comprehensive reference begins with an examination of how SiC is grown and how defects in SiC growth can affect working devices. Key issues in selective doping of SiC via ion implantation are covered with special focus on implant conditions and electrical activation of implants. SiC applications discussed include chemical sensors, motor-control components, high-temperature gas sensors, and high-temperature electronics. By cutting through the arcane data and jargon surrounding the hype on SiC, this book gives an honest assessment of today's SiC technology and shows you how SiC can be adopted in developing tomorrow's applications.
Download or read book Silicon Carbide Microsystems for Harsh Environments written by Muthu Wijesundara and published by Springer Science & Business Media. This book was released on 2011-05-17 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Carbide Microsystems for Harsh Environments reviews state-of-the-art Silicon Carbide (SiC) technologies that, when combined, create microsystems capable of surviving in harsh environments, technological readiness of the system components, key issues when integrating these components into systems, and other hurdles in harsh environment operation. The authors use the SiC technology platform suite the model platform for developing harsh environment microsystems and then detail the current status of the specific individual technologies (electronics, MEMS, packaging). Additionally, methods towards system level integration of components and key challenges are evaluated and discussed based on the current state of SiC materials processing and device technology. Issues such as temperature mismatch, process compatibility and temperature stability of individual components and how these issues manifest when building the system receive thorough investigation. The material covered not only reviews the state-of-the-art MEMS devices, provides a framework for the joining of electronics and MEMS along with packaging into usable harsh-environment-ready sensor modules.
Download or read book Silicon Carbide and Related Materials 2013 written by Hajime Okumura and published by Trans Tech Publications Ltd. This book was released on 2014-02-26 with total page 1246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers cover most of the current research efforts on the wide bandgap semiconductor silicon carbide (SiC) and related materials, and a wide range of topics from crystal growth to their power electronics applications. In these proceedings, the written version of 270 contributed papers and 13 invited papers are included. The major chapters of the proceedings collect papers in the area of bulk growth of SiC, epitaxial growth of SiC, physical properties and characterization, processing, devices and application. There are three shorter chapters on graphene, III-nitrides and related materials. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 283 papers are grouped as follows: Chapter 1: SiC Bulk Growth; Chapter 2: SiC Epitaxial Growth; Chapter 3: Physical Properties and Characterization of SiC; Chapter 4: Processing of SiC; Chapter 5: Devices and Circuits; Chapter 6: Related Materials.
Download or read book Silicon Carbide written by Wolfgang J. Choyke and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1997 publication of "Silicon Carbide - A Review of Fundamental Questions and Applications to Current Device Technology" edited by Choyke, et al., there has been impressive progress in both the fundamental and developmental aspects of the SiC field. So there is a growing need to update the scientific community on the important events in research and development since then. The editors have again gathered an outstanding team of the world's leading SiC researchers and design engineers to write on the most recent developments in SiC.
Download or read book Advanced Silicon Carbide Devices and Processing written by Stephen Saddow and published by BoD – Books on Demand. This book was released on 2015-09-17 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the production of the first commercially available blue LED in the late 1980s, silicon carbide technology has grown into a billion-dollar industry world-wide in the area of solid-state lighting and power electronics. With this in mind we organized this book to bring to the attention of those well versed in SiC technology some new developments in the field with a particular emphasis on particularly promising technologies such as SiC-based solar cells and optoelectronics. We have balanced this with the more traditional subjects such as power electronics and some new developments in the improvement of the MOS system for SiC MOSFETS. Given the importance of advanced microsystems and sensors based on SiC, we also included a review on 3C-SiC for both microsystem and electronic applications.
Download or read book Silicon Epitaxy written by and published by Elsevier. This book was released on 2001-09-26 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its inception in 1966, the series of numbered volumes known as Semiconductors and Semimetals has distinguished itself through the careful selection of well-known authors, editors, and contributors. The Willardson and Beer series, as it is widely known, has succeeded in producing numerous landmark volumes and chapters. Not only did many of these volumes make an impact at the time of their publication, but they continue to be well-cited years after their original release. Recently, Professor Eicke R. Weber of the University of California at Berkeley joined as a co-editor of the series. Professor Weber, a well-known expert in the field of semiconductor materials, will further contribute to continuing the series' tradition of publishing timely, highly relevant, and long-impacting volumes. Some of the recent volumes, such as Hydrogen in Semiconductors, Imperfections in III/V Materials, Epitaxial Microstructures, High-Speed Heterostructure Devices, Oxygen in Silicon, and others promise that this tradition will be maintained and even expanded.
Download or read book The Growth of SiC Crystals from Vapor by the Bridgman Stockbarger Method written by Juris Smiltens and published by . This book was released on 1974 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the dissociation curve (P vs. T), an equation for the rate of raising the pressure P of the binary vapor for obtaining the required linear growth rate of the crystal of c centimeters per hour is derived. It is shown that the rate is nearly proportional to P. Modifications of the furnace since the last report (Mat. Res. Bull. 4, S85, 1969) are described. Justification for the use of helium as the inert ambient gas is given. Two techniques are used: (1) growing with constant temperature of the crucible point and (2) growing with constant pressure of the sublimation bottle. To date, only polycrystalline boules consisting of large grains have been obtained. It is believed, however, that with certain technological improvements the methods that are developed here will ultimately yield single crystal boules. As a by-product, small cubic crystals, about one mm in the largest dimension, with good quality faces (cube and octahedron) have been obtained.
