Download or read book Silicon Carbide and Related Materials 2009 written by Anton J. Bauer and published by Trans Tech Publications Ltd. This book was released on 2010-04-29 with total page 1277 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICSCRM 2009 Selected, peer reviewed papers from the International Conference on Silicon Carbide and Related Materials 2009, Nürnberg, Germany, October 11 – 16, 2009
Download or read book Graphene Nanoelectronics written by Raghu Murali and published by Springer Science & Business Media. This book was released on 2012-03-13 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes how will graphene can be used as a replacement for Silicon technology “ and the potential benefits of using graphene in a wide variety of electronic applications. Graphene has emerged as a potential candidate to replace traditional CMOS for a number of electronic applications; this book presents the latest advances in graphene nanoelectronics and details its use in alternative channel materials, on-chip interconnects, heat spreaders, RF transistors, NEMS, and sensors. The book also provides details on the various methods to grow graphene, including epitaxial, CVD, and chemical methods. With the growing interest in this material, this book serves as a spring-board for anyone trying to start working on this topic. The book is also suitable to experts who wish to update themselves with the latest findings in the field.
Download or read book Silicon Carbide and Related Materials 2008 written by Amador Pérez-Tomás and published by Trans Tech Publications Ltd. This book was released on 2009-03-02 with total page 1041 pages. Available in PDF, EPUB and Kindle. Book excerpt: ECSCRM 2008 Selected, peer reviewed papers from the 7th European Conference on Silicon Carbide and Related Materials, September 7 – 11, Barcelona, Spain
Download or read book Compound Semiconductor Bulk Materials And Characterizations Volume 2 written by Osamu Oda and published by World Scientific. This book was released on 2012-10-31 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with compound semiconductor bulk materials, and has been written for students, researchers and engineers in material science and device fabrication. It provides the elementary and intermediate knowledge of compound semiconductor bulk materials necessary for entry into this field. The first volume described the physical properties, crystal growth technologies, principles of crystal growth, various defects in crystals, characterization techniques and applications, and reviewed various III-V and II-V compound semiconductor materials. In this second volume, other materials are reviewed, including those that have recently received attention such as GaN, AlN, SiC and ZnO for optical and electronic devices.
Download or read book Wide Bandgap Semiconductors for Power Electronics written by Peter Wellmann and published by John Wiley & Sons. This book was released on 2022-01-10 with total page 743 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wide Bandgap Semiconductors for Power Electronic A guide to the field of wide bandgap semiconductor technology Wide Bandgap Semiconductors for Power Electronics is a comprehensive and authoritative guide to wide bandgap materials silicon carbide, gallium nitride, diamond and gallium(III) oxide. With contributions from an international panel of experts, the book offers detailed coverage of the growth of these materials, their characterization, and how they are used in a variety of power electronics devices such as transistors and diodes and in the areas of quantum information and hybrid electric vehicles. The book is filled with the most recent developments in the burgeoning field of wide bandgap semiconductor technology and includes information from cutting-edge semiconductor companies as well as material from leading universities and research institutions. By taking both scholarly and industrial perspectives, the book is designed to be a useful resource for scientists, academics, and corporate researchers and developers. This important book: Presents a review of wide bandgap materials and recent developments Links the high potential of wide bandgap semiconductors with the technological implementation capabilities Offers a unique combination of academic and industrial perspectives Meets the demand for a resource that addresses wide bandgap materials in a comprehensive manner Written for materials scientists, semiconductor physicists, electrical engineers, Wide Bandgap Semiconductors for Power Electronics provides a state of the art guide to the technology and application of SiC and related wide bandgap materials.
Download or read book Handbook of Crystal Growth written by Tom Kuech and published by Elsevier. This book was released on 2014-11-02 with total page 1384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume IIIA Basic TechniquesHandbook of Crystal Growth, Second Edition Volume IIIA (Basic Techniques), edited by chemical and biological engineering expert Thomas F. Kuech, presents the underpinning science and technology associated with epitaxial growth as well as highlighting many of the chief and burgeoning areas for epitaxial growth. Volume IIIA focuses on major growth techniques which are used both in the scientific investigation of crystal growth processes and commercial development of advanced epitaxial structures. Techniques based on vacuum deposition, vapor phase epitaxy, and liquid and solid phase epitaxy are presented along with new techniques for the development of three-dimensional nano-and micro-structures.Volume IIIB Materials, Processes, and TechnologyHandbook of Crystal Growth, Second Edition Volume IIIB (Materials, Processes, and Technology), edited by chemical and biological engineering expert Thomas F. Kuech, describes both specific techniques for epitaxial growth as well as an array of materials-specific growth processes. The volume begins by presenting variations on epitaxial growth process where the kinetic processes are used to develop new types of materials at low temperatures. Optical and physical characterizations of epitaxial films are discussed for both in situ and exit to characterization of epitaxial materials. The remainder of the volume presents both the epitaxial growth processes associated with key technology materials as well as unique structures such as monolayer and two dimensional materials.Volume IIIA Basic Techniques - Provides an introduction to the chief epitaxial growth processes and the underpinning scientific concepts used to understand and develop new processes. - Presents new techniques and technologies for the development of three-dimensional structures such as quantum dots, nano-wires, rods and patterned growth - Introduces and utilizes basic concepts of thermodynamics, transport, and a wide cross-section of kinetic processes which form the atomic level text of growth process Volume IIIB Materials, Processes, and Technology - Describes atomic level epitaxial deposition and other low temperature growth techniques - Presents both the development of thermal and lattice mismatched streams as the techniques used to characterize the structural properties of these materials - Presents in-depth discussion of the epitaxial growth techniques associated with silicone silicone-based materials, compound semiconductors, semiconducting nitrides, and refractory materials
Download or read book Extreme Environment Electronics written by John D. Cressler and published by CRC Press. This book was released on 2017-12-19 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unfriendly to conventional electronic devices, circuits, and systems, extreme environments represent a serious challenge to designers and mission architects. The first truly comprehensive guide to this specialized field, Extreme Environment Electronics explains the essential aspects of designing and using devices, circuits, and electronic systems intended to operate in extreme environments, including across wide temperature ranges and in radiation-intense scenarios such as space. The Definitive Guide to Extreme Environment Electronics Featuring contributions by some of the world’s foremost experts in extreme environment electronics, the book provides in-depth information on a wide array of topics. It begins by describing the extreme conditions and then delves into a description of suitable semiconductor technologies and the modeling of devices within those technologies. It also discusses reliability issues and failure mechanisms that readers need to be aware of, as well as best practices for the design of these electronics. Continuing beyond just the "paper design" of building blocks, the book rounds out coverage of the design realization process with verification techniques and chapters on electronic packaging for extreme environments. The final set of chapters describes actual chip-level designs for applications in energy and space exploration. Requiring only a basic background in electronics, the book combines theoretical and practical aspects in each self-contained chapter. Appendices supply additional background material. With its broad coverage and depth, and the expertise of the contributing authors, this is an invaluable reference for engineers, scientists, and technical managers, as well as researchers and graduate students. A hands-on resource, it explores what is required to successfully operate electronics in the most demanding conditions.
Download or read book Gallium Nitride and Silicon Carbide Power Technologies written by K. Shenai and published by The Electrochemical Society. This book was released on 2011 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Experiments in Chemistry and Materials Science written by Ketil Motzfeldt and published by John Wiley & Sons. This book was released on 2012-12-04 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting edge high temperature materials include high temperature superconductors, solid oxide fuel cells, thermoelectric materials and ultrahigh temperature construction materials (including metals, cermets and ceramics) and have applications in key areas such as energy, transportation and space technologies. This book introduces the concepts which underpin research into these critical materials including thermodynamics, kinetics and various physical, chemical and modelling techniques with a focus on practical “how to” methods and covers: Introduction to High Temperature Research Basic Design of High Temperature Furnaces Temperature Measurement Radiation Pyrometry Refractory Materials in the Laboratory Vacuum in Theory and Practice The Design of Vacuum Furnaces and Thermobalances With highly detailed instrument illustrations and an emphasis on the control and measurement of the fundamental properties of temperature, pressure and mass, High Temperature Experiments in Chemistry and Materials Science provides a practical reference on high temperature measurements, for researchers, advanced students and those working in academic or industrial laboratories. Introduction to High Temperature Research Basic Design of High Temperature Furnaces Temperature Measurement Radiation Pyrometry Refractory Materials in the Laboratory Vacuum in Theory and Practice The Design of Vacuum Furnaces and Thermobalances
Download or read book Emerging Low Power Semiconductor Devices written by Shubham Tayal and published by CRC Press. This book was released on 2022-08-31 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives insight into the emerging semiconductor devices from their applications in electronic circuits. It discusses the challenges in the field of engineering and applications of advanced low-power devices. Emerging Low-Power Semiconductor Devices: Applications for Future Technology Nodes offers essential exposure to low-power devices, and applications in wireless, biosensing, and circuit domains. This book provides a detailed discussion on all aspects, including the current and future scenarios related to the low-power device. The book also presents basic knowledge about field-effect transistor (FET) devices and introduces emerging and novel FET devices. The chapters include a review of the usage of FET devices in various domains like biosensing, wireless, and cryogenics applications. The chapters also explore device-circuit co-design issues in the digital and analog domains. The content is presented in an easy-to-follow manner that makes it ideal for individuals new to the subject. This book is intended for scientists, researchers, and postgraduate students looking for an understanding of device physics, circuits, and systems.
Download or read book Graphene Nanoelectronics written by Hassan Raza and published by Springer Science & Business Media. This book was released on 2012-03-05 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene is a perfectly two-dimensional single-atom thin membrane with zero bandgap. It has attracted huge attention due to its linear dispersion around the Dirac point, excellent transport properties, novel magnetic characteristics, and low spin-orbit coupling. Graphene and its nanostructures may have potential applications in spintronics, photonics, plasmonics and electronics. This book brings together a team of experts to provide an overview of the most advanced topics in theory, experiments, spectroscopy and applications of graphene and its nanostructures. It covers the state-of-the-art in tutorial-like and review-like manner to make the book useful not only to experts, but also newcomers and graduate students.
Download or read book Minerals Yearbook written by and published by . This book was released on 2011 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Silicon Carbide Technology written by Tsunenobu Kimoto and published by John Wiley & Sons. This book was released on 2014-09-23 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction and up-to-date reference to SiC power semiconductor devices covering topics from material properties to applications Based on a number of breakthroughs in SiC material science and fabrication technology in the 1980s and 1990s, the first SiC Schottky barrier diodes (SBDs) were released as commercial products in 2001. The SiC SBD market has grown significantly since that time, and SBDs are now used in a variety of power systems, particularly switch-mode power supplies and motor controls. SiC power MOSFETs entered commercial production in 2011, providing rugged, high-efficiency switches for high-frequency power systems. In this wide-ranging book, the authors draw on their considerable experience to present both an introduction to SiC materials, devices, and applications and an in-depth reference for scientists and engineers working in this fast-moving field. Fundamentals of Silicon Carbide Technology covers basic properties of SiC materials, processing technology, theory and analysis of practical devices, and an overview of the most important systems applications. Specifically included are: A complete discussion of SiC material properties, bulk crystal growth, epitaxial growth, device fabrication technology, and characterization techniques. Device physics and operating equations for Schottky diodes, pin diodes, JBS/MPS diodes, JFETs, MOSFETs, BJTs, IGBTs, and thyristors. A survey of power electronics applications, including switch-mode power supplies, motor drives, power converters for electric vehicles, and converters for renewable energy sources. Coverage of special applications, including microwave devices, high-temperature electronics, and rugged sensors. Fully illustrated throughout, the text is written by recognized experts with over 45 years of combined experience in SiC research and development. This book is intended for graduate students and researchers in crystal growth, material science, and semiconductor device technology. The book is also useful for design engineers, application engineers, and product managers in areas such as power supplies, converter and inverter design, electric vehicle technology, high-temperature electronics, sensors, and smart grid technology.
Download or read book Nanomaterials Handbook written by Yury Gogotsi and published by CRC Press. This book was released on 2017-08-09 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title features 11 new chapters unique to this edition, including chapters on grain boundaries in graphene, 2D metal carbides and carbonitrides, mechanics of carbon nanotubes and nanomaterials, biomedical applications, oxidation and purification of carbon nanostructures, sintering of nanoceramics, hydrothermal processing, nanofibers, and nanomaterials safety. It offers a comprehensive approach with a focus on inorganic and carbon-based nanomaterials, including fundamentals, applications, synthesis, and characterization. This book also provides a unique angle from the nanomaterial point of view on application, synthesis, and characterization not found in any other nanomaterials book on the market.
Download or read book Carbon Nanomaterials written by Yury Gogotsi and published by CRC Press. This book was released on 2013-10-24 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides information on synthesis, properties, and applications of carbon nanomaterials. With novel materials, such as graphene (atomically flat carbon) or carbon onions (carbon nanospheres), the family of carbon nanomaterials is rapidly growing. This book provides a state-of-the-art overview and in-depth analysis of the most important ca
Download or read book Nanomaterials Based Gas Sensors for SF6 Decomposition Components Detection written by Xiaoxing Zhang and published by BoD – Books on Demand. This book was released on 2017-06-07 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The insulating medium used in gas-insulated switchgear is SF6 gas, which has been widely used in substations. Energy generated by discharge will cause the composition of SF6 and generate characteristic component gases. Diagnosing the insulation defect through analyzing the decomposed gases of SF6 by chemical gas sensors is the optimal method due to its advantages. Carbon nanotubes, TiO2 nanotubes and graphene are chosen as the gas-sensing materials to build specific gas sensors for detecting each kind of SF6 decomposed gases and then enhance the gas sensitivity and selectivity by material modification. The properties and preparation methods are introduced in this book. The author studied the micro-adsorption mechanism and macro-gas sensing properties by theoretical calculation and sensing experiment.
Download or read book Silicon Carbide Microsystems for Harsh Environments written by Muthu Wijesundara and published by Springer Science & Business Media. This book was released on 2011-05-17 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Carbide Microsystems for Harsh Environments reviews state-of-the-art Silicon Carbide (SiC) technologies that, when combined, create microsystems capable of surviving in harsh environments, technological readiness of the system components, key issues when integrating these components into systems, and other hurdles in harsh environment operation. The authors use the SiC technology platform suite the model platform for developing harsh environment microsystems and then detail the current status of the specific individual technologies (electronics, MEMS, packaging). Additionally, methods towards system level integration of components and key challenges are evaluated and discussed based on the current state of SiC materials processing and device technology. Issues such as temperature mismatch, process compatibility and temperature stability of individual components and how these issues manifest when building the system receive thorough investigation. The material covered not only reviews the state-of-the-art MEMS devices, provides a framework for the joining of electronics and MEMS along with packaging into usable harsh-environment-ready sensor modules.
