Download or read book Iron and Cobalt Catalysts written by Wilson D. Shafer and published by MDPI. This book was released on 2020-06-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the turn of the last century when the field of catalysis was born, iron and cobalt have been key players in numerous catalysis processes. These metals, due to their ability to activate CO and CH, haev a major economic impact worldwide. Several industrial processes and synthetic routes use these metals: biomass-to-liquids (BTL), coal-to-liquids (CTL), natural gas-to-liquids (GTL), water-gas-shift, alcohol synthesis, alcohol steam reforming, polymerization processes, cross-coupling reactions, and photocatalyst activated reactions. A vast number of materials are produced from these processes, including oil, lubricants, waxes, diesel and jet fuels, hydrogen (e.g., fuel cell applications), gasoline, rubbers, plastics, alcohols, pharmaceuticals, agrochemicals, feed-stock chemicals, and other alternative materials. However, given the true complexities of the variables involved in these processes, many key mechanistic issues are still not fully defined or understood. This Special Issue of Catalysis will be a collaborative effort to combine current catalysis research on these metals from experimental and theoretical perspectives on both heterogeneous and homogeneous catalysts. We welcome contributions from the catalysis community on catalyst characterization, kinetics, reaction mechanism, reactor development, theoretical modeling, and surface science.

Download or read book Preparation of Catalysts IV written by G. Poncelet and published by Elsevier. This book was released on 1987-05-01 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the IVth International Symposium on the ``Scientific Bases for the Preparation of Heterogeneous Catalysts'', are presented in this volume. Since its start in 1975, this series of Symposia has continued to attract increasing scientific attention. An appreciable proportion of the papers presented at this Fourth Symposium stemmed from industrial research laboratories. The symposium dealt with catalysts for selective oxidation, hydrodesulphurization, Fischer-Tropsch catalysis, methanol synthesis, metal supported catalysts and new trends in catalyst preparation.

Download or read book Greener Fischer Tropsch Processes written by Peter M. Maitlis and published by John Wiley & Sons. This book was released on 2013-01-30 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Greener Fischer-Tropsch Processes How can we use our carbon-based resources in the most responsible manner? How can we most efficiently transform natural gas, coal, or biomass into diesel, jet fuel or gasoline to drive our machines? The Big Questions today are energy-related, and the Fischer-Tropsch process provides industrially tested solutions. This book offers a comprehensive and up-to-date overview of the Fischer-Tropsch process, from the basic science and engineering to commercial issues. It covers industrial, economic, environmental, and fundamental aspects, with a specific focus on “green” concepts such as sustainability, process improvement, waste-reduction, and environmental care. The result is a practical reference for researchers, engineers, and financial analysts working in the energy sector, who are interested in carbon conversion, fuel processing or synthetic fuel technologies. It is also an ideal introductory book on the Fischer-Tropsch process for graduate courses in chemistry and chemical engineering.

Download or read book Fossil Energy Update written by and published by . This book was released on 1982 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fischer Tropsch Technology written by André Steynberg and published by Elsevier. This book was released on 2004-10-30 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fischer-Tropsch Technology is a unique book for its state-of-the-art approach to Fischer Tropsch (FT) technology. This book provides an explanation of the basic principles and terminology that are required to understand the application of FT technology. It also contains comprehensive references to patents and previous publications. As the first publication to focus on theory and application, it is a contemporary reference source for students studying chemistry and chemical engineering. Researchers and engineers active in the development of FT technology will also find this book an invaluable source of information. * Is the first publication to cover the theory and application for modern Fischer Tropsch technology * Contains comprehensive knowledge on all aspects relevant to the application of Fischer Tropsch technology* No other publication looks at past, present and future applications

Download or read book Production of Biofuels and Chemicals with Bifunctional Catalysts written by Zhen Fang and published by Springer. This book was released on 2017-12-27 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides state-of-the-art reviews, current research, prospects and challenges of the production of biofuels and chemicals such as furanic biofuels, biodiesel, carboxylic acids, polyols and others from lignocellulosic biomass, furfurals, syngas and γ-valerolactone with bifunctional catalysts, including catalytic, and combined biological and chemical catalysis processes. The bifunctionality of catalytic materials is a concept of not only using multifunctional solid materials as activators, but also design of materials in such a way that the catalytic materials have synergistic characteristics that promote a cascade of transformations with performance beyond that of mixed mono-functional catalysts. This book is a reference designed for researchers, academicians and industrialists in the area of catalysis, energy, chemical engineering and biomass conversion. Readers will find the wealth of information contained in chapters both useful and essential, for assessing the production and application of various biofuels and chemicals by chemical catalysis and biological techniques.

Download or read book Advances in Fischer Tropsch Synthesis Catalysts and Catalysis written by B. H. Davis and published by CRC Press. This book was released on 2009-11-10 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rising oil costs have stimulated significant interest in the Fischer-Tropsch synthesis (FTS) as a method for producing a synthetic petroleum substitute. Drawn from the proceedings at a symposium held during the 236th meeting of the American Chemical Society in Philadelphia in August 2008, Advances in Fischer-Tropsch Synthesis, Catalysts, and Cataly

Download or read book Supported Catalysts and Their Applications written by David C Sherrington and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need to improve both the efficiency and environmental acceptability of industrial processes is driving the development of heterogeneous catalysts across the chemical industry, including commodity, specialty and fine chemicals and in pharmaceuticals and agrochemicals. Drawing on international research, Supported Catalysts and their Applications discusses aspects of the design, synthesis and application of solid supported reagents and catalysts, including supported reagents for multi-step organic synthesis; selectivity in oxidation catalysis; mesoporous molecular sieve catalysts; and the use of Zeolite Beta in organic reactions. In addition, the two discrete areas of heterogeneous catalysis (inorganic oxide materials and polymer-based catalysts) that were developing in parallel are now shown to be converging, which will be of great benefit to the whole field. Providing a snapshot of the state-of-the-art in this fast-moving field, this book will be welcomed by industrialists and researchers, particularly in the agrochemicals and pharmaceuticals industries.

Download or read book Bimetallic Catalysts written by John H. Sinfelt and published by Wiley-Interscience. This book was released on 1983-09-29 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an account of the research on bimetallic catalysts. Focuses attention on the possibility of influencing the selectivity of chemical transformations on metal surfaces and preparing metal alloys in a highly dispersed state. Covers the validation and elucidation of the bimetallic cluster concept. Includes figures and tables.

Download or read book Synthetic Organic Sonochemistry written by Jean-Louis Luche and published by Springer Science & Business Media. This book was released on 1998-09-30 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: TEAN-LOUIS LUCHE A French poet of this eentury, Pierre Mae Orlan, wrote "Adventure does not exist, it is only in the mind of he who is pursuing it, and, as soon as it is at one's finger tips, it vanishes to come back to life, far away, in a different shape, at the frontiers of imagination". This sentence could be used to define the adventure that many sonochemists experienced. Most of them did not even suspect that the "laboratory trick" they were using was the first contact with a considerable amount of science. If a personal note is allowed here, it ean be interesting to mention the part played by chance in my involvement in sonochemistry. Almost 20 years ago, we had to perform an apparently simple Grignard reaetion with n-butylmagnesium bromide and geranial, but the results were repeatedly unsatisfactory. The one-pot Barbier technique was attempted, also without success. From my studies at the University, I imagined that the failure of the latter reaction could be caused by a common phenomenon known by solid state chemists as passivation, which in some cases can be overcome by ultrasonication. By chance, an ultrasonie bath was sitting on the next beneh, borrowed to clean some equipment. We clamped our reluctant reaction mixture into the bath, the reaction proceeded vigorously, and ... the adventure started. Without knowing anything about cavitation, high energies, ete., we had an illustration of Goethe's word "Am Anfang war die Tat" (at the Beginning was the Act).

Download or read book Lignocellulosic Biomass to Liquid Biofuels written by Abu Yousuf and published by Academic Press. This book was released on 2019-11-20 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lignocellulosic Biomass to Liquid Biofuels explores the existing technologies and most recent developments for the production of second generation liquid biofuels, providing an introduction to lignocellulosic biomass and the processes for its conversion into biofuels. The book demonstrates biorefinery concepts compared with petro refinery, as well as the challenges of second generation biofuels processing. In addition to current pre-treatment techniques and their technical, environmental and economic implications, chapters included also further examine the particularities of conversion processes for bioethanol, biobutanol and biodiesel through chemical, biochemical and combined approaches. Finally, the book looks into concepts and tools for techno-economic and environmental analysis, which include supply chain assessment, by-products, zero-waste techniques and process evaluation and optimization. Lignocellulosic Biomass to Liquid Biofuels is particularly useful for researchers in the field of liquid biofuels seeking alternative chemical and biochemical pathways or those interested advanced methods to calculate maximum yield for each process and methods to simulate the implications and costs of scaling up. Furthermore, with the introduction provided by this volume, researchers and graduate students entering the field will be able to quickly get up to speed and identify knowledge gaps in existing and upcoming technology the book's comprehensive overview. - Examines the state-of-the-art technology for liquid biofuels production from lignocellulosic biomass - Provides a comprehensive overview of the existing chemical and biochemical processes for second generation biofuel conversion - Presents tools for the techno-economic and environmental analysis of technologies, as well as for the scale-up simulation of conversion processes

Download or read book Carbon Materials for Catalysis written by Philippe Serp and published by John Wiley & Sons. This book was released on 2009-02-04 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first comprehensive book covering all aspects of the use of carbonaceous materials in heterogeneous catalysis. It covers the preparation and characterization of carbon supports and carbon-supported catalysts; carbon surface chemistry in catalysis; the description of catalytic, photo-catalytic, or electro-catalytic reactions, including the development of new carbon materials such as carbon xerogels, aerogels, or carbon nanotubes; and new carbon-based materials in catalytic or adsorption processes. This is a premier reference for carbon, inorganic, and physical chemists, materials scientists and engineers, chemical engineers, and others.

Download or read book Catalysis for Clean Energy and Environmental Sustainability written by K. K. Pant and published by Springer Nature. This book was released on 2021-04-01 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a two-volume work that offers a unique blend of information on realistic evaluations of catalyst-based synthesis processes using green chemistry principles and the environmental sustainability applications of such processes for biomass conversion, refining, and petrochemical production. The volumes provide a comprehensive resource of state-of-the-art technologies and green chemistry methodologies from researchers, academics, and chemical and manufacturing industrial scientists. The work will be of interest to professors, researchers, and practitioners in clean energy catalysis, green chemistry, chemical engineering and manufacturing, and environmental sustainability. This volume focuses on catalyst synthesis and green chemistry applications for petrochemical and refining processes. While most books on the subject focus on catalyst use for conventional crude, fuel-oriented refineries, this book emphasizes recent transitions to petrochemical refineries with the goal of evaluating how green chemistry applications can produce clean energy through petrochemical industrial means. The majority of the chapters are contributed by industrial researchers and technicians and address various petrochemical processes, including hydrotreating, hydrocracking, flue gas treatment and isomerization catalysts.

Download or read book Molecular Spectroscopy of Oxide Catalyst Surfaces written by Anatoli Davydov and published by John Wiley & Sons. This book was released on 2003-06-27 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: As in the study of transition metal complexes in solution, molecular spectroscopic methods - principally the infrared, ultraviolet/visible and electron spin resonance spectroscopies - have played key roles in establishing the concepts of coordination chemistry occurring at the surfaces of solids. This book describes the development of the principals of coordination chemistry of oxide surfaces using analyses of data obtained by these methods. The nature, properties, concentration of the surface adsorption centers and their influence on the character of interaction with different molecules are investigated. The book commences with an account of the basic theoretical principles and experimental techniques of the various spectroscopy methods, with special attention devoted to in situ measurements where the oxide or catalyst sample is in contact with the adsorbate or the reactant. A detailed account is presented of the methods for characterizing the oxidation state and degree of coordination of surface cations and oxygen anions by the adsorption of probe molecules. The complexation of many inorganic, organometallic and organic molecules with different oxide systems is critically examined, and a classification of formed surface compounds, based on the interaction with definite type of adsorption centers, is given. Possible mechanisms of numerous catalytic reactions, including the transformation of organic molecules over acidic catalysts via the carboionic mechanism, are discussed using the spectroscopic identifications of reaction intermediates. A comprehensive analysis of the literature on the interpretation of the spectra of surface compounds on oxides is presented. This highly illustrated and extensively referenced volume is intended for specialists working in the fields of surface physical chemistry, surface and materials sciences, and adsorption phenomena and is essential reading for those involved in the heterogeneous catalysis by transition metal-oxides.

Download or read book Spectroscopic Properties of Inorganic and Organometallic Compounds written by G Davidson and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectroscopic Properties of Inorganic and Organometallic Compounds provides a unique source of information on an important area of chemistry. Divided into sections mainly according to the particular spectroscopic technique used, coverage in each volume includes: NMR (with reference to stereochemistry, dynamic systems, paramagnetic complexes, solid state NMR and Groups 13-18); nuclear quadrupole resonance spectroscopy; vibrational spectroscopy of main group and transition element compounds and coordinated ligands; and electron diffraction. Reflecting the growing volume of published work in this field, researchers will find this Specialist Periodical Report an invaluable source of information on current methods and applications. Specialist Periodical Reports provide systematic and detailed review coverage in major areas of chemical research. Compiled by teams of leading experts in their specialist fields, this series is designed to help the chemistry community keep current with the latest developments in their field. Each volume in the series is published either annually or biennially and is a superb reference point for researchers. www.rsc.org/spr

Download or read book Industrial Applications of the M ssbauer Effect written by G.J Long and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: As is often the case, the preface is the last task to be finished during the preparation of a large volume such as you are now holding. The first task, obtaining approval for a symposium on the industrial applications, now seems a long time ago. The idea orginated with John Stevens, probably in 1982, from his observation of papers dealing with industrial applications of the Mossbauer effect appearing in the Mossbauer Effect Reference and Data Journal. His initial suggestion for a symposium entitled "Industrial Applications of the Mossbauer Effect" to be held at a national meeting of the American Chemical Society eventually led to the symposium at the International Chemical Congress of Pacific Basin Societies which met in Honolulu, Hawaii in December 1984. This volume is the result of the symposium at the above mentioned Congress, but is not actually the 'proceedings' of the symposium because this volume does not contain all of the over one hundred Mossbauer effect papers that were pre sented at the symposium. Rather it contains a selection of papers that the or ganizing committee for the symposium deemed most appropriate for a volume devoted to industrial applications of the Mossbauer effect. The final volume also contains six chapters that were not a part of the symposium but which are closely related to the topic. There is another difference from many proceedings.

Download or read book Advances in Microporous and Mesoporous Materials written by Rafael Huirache Acuña and published by BoD – Books on Demand. This book was released on 2020-07-15 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, microporous and mesoporous materials are versatile solids of great interest due to their structures and pore sizes, which allow their application in many areas. Accordingly, with IUPAC, materials with pore sizes smaller than 2 nm are called microporous and with pore sizes between 2 and 50 nm are called mesoporous. The pore size has an important impact on the material properties and affects their applications. In addition, high surface area, and their ability to incorporate functional groups on the framework are of great relevance for commercial and science applications. This book intends to provide readers with a comprehensive overview of recent improvements in the microporous and mesoporous materials field.