Download or read book Silica Aerogel Process Modeling and Experimental Investigations written by Kevin Daniel Lofftus and published by . This book was released on 1989 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Translucent Silica Aerogel written by Cinzia Buratti and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silica translucent aerogels are unique materials able to improve the thermal insulation performance of buildings without compromising daylight transmission. The aim of the book is to give a general overview on state of the art research on translucent aerogels and their applications in buildings and to provide a data set about thermal and physical properties, useful in buildings' energy performance simulation and design.Silica aerogels are nanostructured solid materials made of approximately 96% air and 4% silica. They show a thermal conductivity in the 0.012-0.020 W/mK range and excellent optical properties, especially visible transmission. They come in granular and monolithic form. Granular aerogels are relatively easy to produce and less expensive than monolithic panes, but show worse optical and thermal performance. Monolithic aerogels enable vision through the material, but their fabrication process is not developed at an industrial scale.The book collects the contributions of experts in the field of translucent aerogels from all over the world. The contents of the eight chapters are detailed as follows:Chapter 1 is the contribution from Union College, Schenectady (USA). The chapter reviews the chemical approaches to silica wet gels preparation, the drying methods used to yield monoliths, and the challenges and limitations associated with its production.Chapter 2 is a contribution from EMPA, Dübendorf (Switzerland). It is a review of current state of the art research on silica aerogel granulate production, including raw materials selection, hydrophobization strategies, and drying methodologies. Chapter 3 is a contribution from Takenaka Corporation, Tokyo (Japan). The main techniques for the optical properties evaluation are described and data are provided. An original application of translucent aerogels in buildings and future research topics are also proposed.Chapter 4 is a contribution from Recep Tayyip Erdogan University, Rize and Ataturk University, Erzurum (Turkey). A review of the thermal properties of aerogels is provided, highlighting their better performance when compared to conventional and superinsulation materials.Chapter 5 is a contribution from the University of Perugia, Perugia (Italy). The acoustic properties of both granular and monolithic systems are investigated. For example, the influence of granule size and layer thickness that is deepened for granular aerogels is discussed, while for the monolithic form, the little data that is currently available is reported on. Chapter 6 is a contribution from the University of Tuscia, Viterbo (Italy) and Buro Happold Ltd, London (UK). It is focused on Life Cycle Assessment of silica aerogel, showing the research challenges in understanding its environmental impact, lower than the one of conventional thermal insulating glazing systems.Chapter 7 is a contribution from the University of Lyon and INSA-Lyon, Lyon (France). An overview of measurement methods and modeling tools available in literature is provided and a summary of the main mechanical properties of both monolithic and granular aerogels is reported on.Chapter 8 is a contribution from the Norwegian University of Science and Technology, Trondheim and SINTEF, Trondheim (Norway). Authors present their experimental investigations on various aerogel systems in different building envelopes (new aerogel glass material, aerogel-incorporated concrete, and so forth).
Download or read book An Experimental Investigation of Granular Silica Aerogel Microsphere Air Samplers written by Matthew Thomas Guise and published by . This book was released on 2000 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Springer Handbook of Aerogels written by Michel A. Aegerter and published by Springer Nature. This book was released on 2023-10-01 with total page 1778 pages. Available in PDF, EPUB and Kindle. Book excerpt: This indispensable handbook provides comprehensive coverage of the current state-of-the-art in inorganic, organic, and composite aerogels – from synthesis and characterization to cutting-edge applications and their potential market impact. Built upon Springer’s successful Aerogels Handbook published in 2011, this handbook features extensive revisions and timely updates, reflecting the changes in this fast-growing field. Aerogels are the lightest solids known to man. Up to 1000 times lighter than glass and with a density only four times that of air, they possess extraordinarily high thermal, electrical, and acoustic insulation properties, and boast numerous entries in Guinness World Records. Originally based on silica, R&D efforts have extended this class of materials to incorporate non-silicate inorganic oxides, natural and synthetic organic polymers, carbon, metal, and ceramic materials. Composite systems involving polymer-crosslinked aerogels and interpenetrating hybrid networks have been developed and exhibit remarkable mechanical strength and flexibility. Even more exotic aerogels based on clays, chalcogenides, phosphides, quantum dots, and biopolymers such as chitosan are opening new applications for the construction, transportation, energy, defense and healthcare industries. Applications in electronics, chemistry, mechanics, engineering, energy production and storage, sensors, medicine, nanotechnology, military and aerospace, oil and gas recovery, thermal insulation, and household uses are being developed. Readers of this fully updated and expanded edition will find an exhaustive source for all aerogel materials known today, their fabrication, upscaling aspects, physical and chemical properties, and the most recent advances towards applications and commercial use. This key reference is essential reading for a combined audience of graduate students, academic researchers, and industry professionals.
Download or read book Molecular Dynamics Simulation written by J. M. Haile and published by Wiley-Interscience. This book was released on 1997-03-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Provides a lot of reading pleasure and many new insights." -Journal of Molecular Structure "This is the most entertaining, stimulating and useful book which can be thoroughly recommended to anyone with an interest in computer simulation." -Contemporary Physics "A very useful introduction . . . more interesting to read than the often dry equation-based texts." -Journal of the American Chemical Society Written especially for the novice, Molecular Dynamics Simulation demonstrates how molecular dynamics simulations work and how to perform them, focusing on how to devise a model for specific molecules and then how to simulate their movements using a computer. This book provides a collection of methods that until now have been scattered through the literature of the last 25 years. It reviews elements of sampling theory and discusses how modern notions of chaos and nonlinear dynamics explain the workings of molecular dynamics. Stresses easy-to-use molecules * Provides sample calculations and figures * Includes four complete FORTRAN codes
Download or read book Silica Aerogel Composites written by Mahesh Sachithanadam and published by Springer. This book was released on 2016-01-13 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the improvement in thermal insulation properties of protein-based silica aerogel composites fabricated by a novel, inexpensive and feasible method. The resulting material exhibits polymeric foam behavior including high compressibility, super-hydrophobic qualities and excellent strain recovery in addition to low thermal conductivity. The fabrication methodologies are explained in great detail and represented in flowcharts for easy reference and understanding. This monograph gives readers a new perspective on composite fabrication using methods other than the traditional ones and explores the endless ways of altering the composition to modify the properties of the silica aerogel composites. Applications for this novel composite are diverse and range from those in the pharmaceutical and aerospace industries to the oil and gas industries.
Download or read book Theoretical and Experimental Investigation of Silica Gel written by Ahmed Rezk Masoud Rezk and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This PhD project was set out to improve the performance of silica gel / water adsorption cooling systems using a number of investigation tools. A novel global lumped analytical simulation model has been constructed for a commercialised two-bed silica gel / water 450kW adsorption chiller. It was integrated with a genetic algorithm (GA) optimisation toolbox to determine the optimum operating conditions to obtain the optimum chiller performance. The model was used to investigate the effect of physical and operating on the chiller performance. The model was also used to investigate the effect of various adsorbent bed enhancement techniques that are presented in published literature. An experimental test facility has been designed, constructed and commissioned to study the performance of scaled down adsorbent bed modules. It has been constructed to understand the effect of the operating conditions on adsorbent-bed heat and mass transfer performance. A dynamic vapour sorption (DVS) gravimetric analyser has been used to characterise a new species of adsorbents (MOFs). These adsorbents have strong potential towards water sorption and could replace the currently applied silica gel. MOFs adsorbents have been characterised in terms of adsorption isotherms and kinetics, in addition to its cyclic analysis. It was found that HKUST-1 (copper based MOF) outperforms silica gel with 95.7% increase in the water uptake. Iron based MOF (MIL-100) was found to outperform silica gel for high evaporating temperature application.
Download or read book Sol Gel Science written by C. Jeffrey Brinker and published by Academic Press. This book was released on 2013-10-22 with total page 925 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing presents the physical and chemical principles of the sol-gel process. The book emphasizes the science behind sol-gel processing with a chapter devoted to applications. The first chapter introduces basic terminology, provides a brief historical sketch, and identifies some excellent texts for background reading. Chapters 2 and 3 discuss the mechanisms of hydrolysis and condensation for nonsilicate and silicate systems. Chapter 4 deals with stabilization and gelation of sols. Chapter 5 reviews theories of gelation and examines the predicted and observed changes in the properties of a sol in the vicinity of the gel point. Chapter 6 describes the changes in structure and properties that occur during aging of a gel in its pore liquor (or some other liquid). The discussion of drying is divided into two parts, with the theory concentrated in Chapter 7 and the phenomenology in Chapter 8. The structure of dried gels is explored in Chapter 9. Chapter 10 shows the possibility of using the gel as a substrate for chemical reactions or of modifying the bulk composition of the resulting ceramic by performing a surface reaction (such as nitridation) on the gel. Chapter 11 reviews the theory and practice of sintering, describing the mechanisms that govern densification of amorphous and crystalline materials, and showing the advantages of avoiding crystallization before sintering is complete. The properties of gel-derived and conventional ceramics are discussed in Chapter 12. The preparation of films is such an important aspect of sol-gel technology that the fundamentals of film formation are treated at length in Chapter 13. Films and other applications are briefly reviewed in Chapter 14. Materials scientists and researchers in the field of sol-gel processing will find the book invaluable.
Download or read book Assessment of Methods to Consolidate Iodine Loaded Silver Functionalized Silica Aerogel written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of Energy is currently investigating alternative sorbents for the removal and immobilization of radioiodine from the gas streams in a nuclear fuel reprocessing plant. One of these new sorbents, Ag0-functionalized silica aerogels, shows great promise as a potential replacement for Ag-bearing mordenites because of its high selectivity and sorption capacity for iodine. Moreover, a feasible consolidation of iodine-loaded Ag0-functionalized silica aerogels to a durable SiO2-based waste form makes this aerogel an attractive choice for sequestering radioiodine. This report provides a preliminary assessment of the methods that can be used to consolidate iodine-loaded Ag0-functionalized silica aerogels into a final waste form. In particular, it focuses on experimental investigation of densification of as prepared Ag0-functionalized silica aerogels powders, with or without organic moiety and with or without sintering additive (colloidal silica), with three commercially available techniques: 1) hot uniaxial pressing (HUP), 2) hot isostatic pressing (HIP), and 3) spark plasma sintering (SPS). The densified products were evaluated with helium gas pycnometer for apparent density, with the Archimedes method for apparent density and open porosity, and with high-resolution scanning electron microscopy and energy dispersive spectroscopy (SEM-EDS) for the extent of densification and distribution of individual elements. The preliminary investigation of HUP, HIP, and SPS showed that these sintering methods can effectively consolidate powders of Ag0-functionalized silica aerogel into products of near-theoretical density. Also, removal of organic moiety and adding 5.6 mass% of colloidal silica to Ag0-functionalized silica aerogel powders before processing provided denser products. Furthermore, the ram travel data for SPS indicated that rapid consolidation of powders can be performed at temperatures below 950°C.
Download or read book Aerogels for Energy Saving and Storage written by Meldin Mathew and published by John Wiley & Sons. This book was released on 2024-07-23 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the energy storage applications of a wide variety of aerogels made from different materials In Aerogels for Energy Saving and Storage, an expert team of researchers delivers a one-stop resource covering the state-of-the-art in aerogels for energy applications. The book covers their morphology, properties, and processability and serves as a valuable resource for researchers and professionals working in materials science and environmentally friendly energy and power technology. The authors offer a comprehensive review of highly efficient energy applications of aerogels that bridges the gap between engineering, science, and chemistry and advances the field of materials development. They provide a Life Cycle Assessment of aerogels in energy systems, as well as discussions of their impact on the environment. Aerogel synthesis, characterization, fabrication, morphology, properties, energy-related applications, and simulations are all explored, and likely future research directions are provided. Readers will also find: A thorough introduction to aerogels in energy, including state-of-the-art advancements and challenges newly encountered Comprehensive explorations of chitin-based and cellulose-derived aerogels, as well as lignin-, clay-, and carbon nanotube-based aerogels Practical discussions of organic, natural, and inorganic aerogels, with further analyses of the lifecycle of aerogels In-depth examinations of the theory, modeling, and simulation of aerogels Perfect for chemical and environmental engineers, Aerogels for Energy Saving and Storage will also earn a place in the libraries of chemistry and materials science researchers in academia and industry.
Download or read book Aerogels Handbook written by Michel Andre Aegerter and published by Springer Science & Business Media. This book was released on 2011-06-10 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerogels are the lightest solids known. Up to 1000 times lighter than glass and with a density as low as only four times that of air, they show very high thermal, electrical and acoustic insulation values and hold many entries in Guinness World Records. Originally based on silica, R&D efforts have extended this class of materials to non-silicate inorganic oxides, natural and synthetic organic polymers, carbon, metal and ceramic materials, etc. Composite systems involving polymer-crosslinked aerogels and interpenetrating hybrid networks have been developed and exhibit remarkable mechanical strength and flexibility. Even more exotic aerogels based on clays, chalcogenides, phosphides, quantum dots, and biopolymers such as chitosan are opening new applications for the construction, transportation, energy, defense and healthcare industries. Applications in electronics, chemistry, mechanics, engineering, energy production and storage, sensors, medicine, nanotechnology, military and aerospace, oil and gas recovery, thermal insulation and household uses are being developed with an estimated annual market growth rate of around 70% until 2015. The Aerogels Handbook summarizes state-of-the-art developments and processing of inorganic, organic, and composite aerogels, including the most important methods of synthesis, characterization as well as their typical applications and their possible market impact. Readers will find an exhaustive overview of all aerogel materials known today, their fabrication, upscaling aspects, physical and chemical properties, and most recent advances towards applications and commercial products, some of which are commercially available today. Key Features: •Edited and written by recognized worldwide leaders in the field •Appeals to a broad audience of materials scientists, chemists, and engineers in academic research and industrial R&D •Covers inorganic, organic, and composite aerogels •Describes military, aerospace, building industry, household, environmental, energy, and biomedical applications among others
Download or read book Proceedings of 8th GACM Colloquium on Computational Mechanics written by Tobias Gleim and published by kassel university press GmbH. This book was released on 2019-09-04 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference book contains papers presented at the 8th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry. The conference was held from August 28th – 30th, 2019 in Kassel, hosted by the Institute of Mechanics and Dynamics of the department for civil and environmental engineering and by the chair of Engineering Mechanics / Continuum Mechanics of the department for mechanical engineering of the University of Kassel. The aim of the conference is, to bring together young scientits who are engaged in academic and industrial research on Computational Mechanics and Computer Methods in Applied Sciences. It provides a plattform to present and discuss recent results from research efforts and industrial applications. In more than 150 presentations, given by young scientists, current scientific developments and advances in engineering practice in this field are presented and discussed. The contributions of the young researchers are supplemented by a poster session and plenary talks from four senior scientists from academia and industry as well as from the GACM Best PhD Award winners 2017 and 2018.
Download or read book Experimental Investigation of the Thermodynamic Characteristics of Silica Gel water Working Pair written by Charn Hun Loke and published by . This book was released on 1999 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Theoretical and Experimental Investigations on Sintering Kinetics of Silica Nanoparticles written by Hans Joachim Schmid and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 39 (thesis year 1994) a total of 13,953 thesis titles from 21 Canadian and 159 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 39 reports theses submitted in 1994, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.
Download or read book Materials Behavior written by Mihai Ciocoiu and published by CRC Press. This book was released on 2018-06-26 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of advanced materials has become extremely important in the last decade, being widely used in academic and industrial research. This book examines the potential of advanced materials as well as nanotechnology to improve fiber science from fibril to fabric mode, to create better materials and products for a variety of aspects. The book presents research advances in materials behavior using fractal analysis, mathematical modeling and simulation, and other methods. Examined are electrical, mechanical, optical, and magnetic properties; size; morphology; and chemical behavior of such materials as aerogels, polymer films, nanocomposite materials, natural composites, catalysis, and more with a view to their application in the medical, engineering, and textile fields. With chapters written by eminent scientists, the book offers valuable information for academics, researchers, and engineering professionals. Contributions range from new methods to novel applications of existing methods to help readers gain understanding of the material and/or structural behavior of new and advanced systems.
