Download or read book Silane Coupling Agents written by Edwin P. Plueddemann and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: * It has been rumored that a bumble bee has such aerodynamic deficiencies that it should be incapable of flight. Fiberglass-reinforced polymer com posites, similarly, have two (apparently) insurmountable obstacles to per formance: 1) Water can hydrolyze any conceivable bond between organic and inorganic phase, and 2) Stresses across the interface during temperature cycling (resulting from a mismatch in thermal expansion coefficients) may exceed the strength of one of the phases. Organofunctional silanes are hybrid organic-inorganic compounds that are used as coupling agents across the organic-inorganic interface to help overcome these two obstacles to composite performance. One of their functions is to use the hydrolytic action of water under equilibrium condi tions to relieve thermally induced stresses across the interface. If equilib rium conditions can be maintained, the two problems act to cancel each other out. Coupling agents are defined primarily as materials that improve the practical adhesive bond of polymer to mineral. This may involve an increase in true adhesion, but it may also involve improved wetting, rheology, and other handling properties. The coupling agent may also modify the inter phase region to strengthen the organic and inorganic boundary layers.
Download or read book Silanes and Other Coupling Agents written by Kash L. Mittal and published by CRC Press. This book was released on 2004-07-28 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume chronicles the proceedings of the Fourth International Symposium on Silanes and Other Coupling Agents held under the aegis of MST Conferences, LLC in Orlando, FL, June 11-13, 2003. Silanes have been used for about half a century as coupling agents / adhesion promoters to promote adhesion between dissimilar materials in a variety of situations, e.g., coating technology, adhesive bonding, and reinforced composites. However, recently silanes have found other applications, for example, as corrosion inhibitors. Lately there has been tremendous R&D activity in understanding the mechanisms by which silanes work as well as in devising new and improved silanes. This volume contains a total of 16 papers which were properly peer reviewed, revised and edited. The book is divided into two parts: 1. Silane Coupling Agents; and 2. Other Coupling Agents / Adhesion Promoters. Topics covered include: sterically hindered silanes; silane hydrolysis; silane oligomers; adsorption of silanes and their surface characterization; structure of bis-silane water-barrier films; silanes for improving adhesive bonding of aluminim, elastomer-to-metal adhesive bonds, and adhesion in silica-filler tire-tread compounds; electrodeposition of bis-silanes; silanes to provide corrosion resistance and as corrosion fatigue inhibitors; silane and other treatments for musical instrument strings; cyclic azasilanes as coupling agents for nanotechnology; hybrid polymers based on silanes for coating textile fabrics; plasma copolymers as adhesion promoters; organophosphate adsorption; and activation of wood fibres. This volume and its predecessors containing bountiful information should serve as a reference source for the latest R&D activity in the arena of coupling agents. Anyone interested or involved in promoting adhesion between dissimilar materials for any application should find this volume of great use and value.
Download or read book Silanes and Other Coupling Agents Volume 5 written by Kash L. Mittal and published by CRC Press. This book was released on 2009-03-16 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of silanes and other coupling agents/adhesion promoters is of tremendous contemporary interest because of their application in many and varied technologically important areas ranging from coatings to reinforced composites to dentistry to biomedical (e.g., for bonding nucleotides to the so-called a gene chipsa ). In addition to their tra
Download or read book Silanes and Other Coupling Agents Volume 4 written by Kash L. Mittal and published by CRC Press. This book was released on 2007-04-30 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book chronicles the proceedings of the Fifth International Symposium held on this topic in Toronto. A total of 26 papers covering many ramifications of silanes and other coupling agents are included in this book. The topics covered include: various ways to deposit silanes; silane adsorption; investigation of interfacial interactions between si
Download or read book Silanes and Other Coupling Agents written by K. L. Mittal and published by VSP. This book was released on 2000-11-28 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume chronicles the proceedings of the Fourth International Symposium on Silanes and Other Coupling Agents held under the aegis of MST Conferences, LLC in Orlando, FL, June 11-13, 2003. Silanes have been used for about half a century as coupling agents / adhesion promoters to promote adhesion between dissimilar materials in a variety of situations, e.g., coating technology, adhesive bonding, and reinforced composites. However, recently silanes have found other applications, for example, as corrosion inhibitors. Lately there has been tremendous R&D activity in understanding the mechanism.
Download or read book Silicone Surface Science written by Michael J. Owen and published by Springer Science & Business Media. This book was released on 2012-05-22 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicone Surface Science offers a survey of the major topics concerning the properties and behavior of silicone surfaces. It covers all main aspects of the subject, including: polydimethylsiloxane, spread monolayers, self-assembled monolayers, hydrophobicity and super-hydrophobicity, coupling agents, surfactants, fluorosilicones, surface treatments and surface analysis. This book brings together the field's leading experts who investigated both fundamental and applied aspects of silicone surface science and technology, and introduces the reader to the origins and historical development of silicone surfaces as well as to their most significant current key features. Silicone Surface Science is an invaluable guide and indispensable reference source for all those interested in this important area of polymer and materials science and technology, from graduate students to experienced scientists alike.
Download or read book Silanes and Other Coupling Agents Volume 2 written by Kash L. Mittal and published by CRC Press. This book was released on 2020-04-27 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book embodies the proceedings of the Second International Symposium on Silanes and other Adhesion Promoters held in Newark, New Jersey, October 21--23, 1998. Silanes are the most popular and widely used coupling agents (or adhesion promoters) to promote adhesion between dissimilar materials in a variety of situations, e.g. coating technology, adhesive bonding, reinforced composites, etc. Since the first symposium on this topic in 1991, there had been a tremendous R&D activity in developing new and more effective adhesion promoters and in understanding and optimising the performance of available coupling agents. The technical program for the symposium contained 36 papers and reflected both overviews and original research contributors and the presenters hailed from academia, industry and other research laboratories. Many different aspects of coupling agents were discussed, and both fundamental and applied aspects were accorded due coverage. In addition to formal presentations, there were brisk and lively discussions throughout the symposium, and this event provided an opportunity for cross-pollination of ideas in the broad arena of adhesion promoters. This present volume contains 18 papers by experts from academia, industry and other research laboratories. All manuscripts were subjected to rigorous peer review and were suitably revised before inclusion in this volume. The book is divided into two parts as follows: Part 1. Silane Coupling Agents; and Part 2: Non-silane Coupling Agents/Adhesion Promotors. The topics covered include: silane adhesion prompters for hydrosilylation cure systems; sterically hindered silanes; study of silanes hydrolysis; adsorption of silanes on different substrates; interaction of water with silane films studied by neutron reflection; characterization of glass fiber sizings; silanes as dispersion promoters; corrosion protection of metals by silanes; surface 'Intelligraft' as a new class of adhesion promoters; hydroxymethylated resorcinol, sol-gels, and -diketone functionalised polymers as adhesion promoters; and plasma deposition of silanes.
Download or read book Silylated Surfaces written by Donald E. Leyden and published by CRC Press. This book was released on 1980 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.
Download or read book Silicon Based Polymers and Materials written by Jerzy J. Chruściel and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-03-07 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon based materials and polymers are made of silicon containing polymers, mainly macromolecular siloxanes (silicones). This book covers the different kinds of siliconbased polymers: silicones, silsesquioxanes (POSS), and silicon-based copolymers. Other silicon containig polymers: polycarbosilanes, polysilazanes, siloxane-organic copolymers, silicon derived high-tech ceramics: silicon carbide and oxycarbide, silicon nitride, etc. have also a very important practical meaning and a hudge number of practical applications. These materials make up products in a variety of industries and products, including technical and medical applicatons. Polycrystalline silicon is the basic material for large scale photovoltaic (PV) applications as solar cells. Technical applications of crystalline (c-Si) and amorphous (a-Si) silicon (fully inorganic materials), silicon nanowires are still quickly growing, especially in the fi eld of microelectronics, optoelectronics, photonics. and photovoltaics, catalysts, and different electronic devices (e.g. sensors, thermoelectric devices). This book is ideal for researchers and as such covers the industrial perspective of using each class of silicon based materials. Discusses silanes, silane coupling agents (SCA), silica, silicates, silane modified fillers, silsesquioxanes, silicones, and other silicon polymers and copolymers for practical applications as polymeric materials and very useful ingredients in materials science.
Download or read book Structural Adhesive Joints in Engineering written by R. D. Adams and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intention of this book is that it should contain everything an engineer needs to know to be able to design and produce adhesively bonded joints which are required to carry significant loads. The advan tages and disadvantages of bonding are given, together with a sufficient understanding of the necessary mechanics and chemistry to enable the designer to make a sound engineering judgement in any particular case. The stresses in joints are discussed extensively so that the engineer can get sufficient philosophy or feel for them, or can delve more deeply into the mathematics to obtain quantitative solutions even with elasto plastic behaviour. A critical description is given of standard methods of testing adhesives, both destructively and non-destructively. The essen tial chemistry of adhesives and the importance of surface preparation are described and guidance is given for adhesive selection by me ans of check lists. For many applications, there will not be a unique adhesive which alone is suitable, and factors such as cost, convenience, produc tion considerations or familiarity may be decisive. A list of applications is given as examples. The authors wish to increase the confidence of engineers using adhesive bonding in load-bearing applications by the information and experience presented. With increasing experience of adhesives en gineering, design will become more elegant as weH as more fitted to its products.
Download or read book Silanes and Other Coupling Agents written by Kash L. Mittal and published by CRC Press. This book was released on 2007-05-11 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book chronicles the proceedings of the Fifth International Symposium held on this topic in Toronto. A total of 26 papers covering many ramifications of silanes and other coupling agents are included in this book. The topics covered include: various ways to deposit silanes; silane adsorption; investigation of interfacial interactions between silanes and substrates; factors affecting effectiveness of silanes as adhesion promotors; silanes for corrosion inhibition/protection; application of silanes in a variety of technological areas; silanes in dental biomaterials, in understanding cellular adhesion, and in the field of textiles; and other (non-silane) coupling agents. This book provides a wealth of latest information on this highly technologically important topic and anyone interested in the use of these materials will find this book of great value and interest.
Download or read book Polymer Additives written by Jiri E. Kresta and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ever since the beginning of the plastics and rubber industry, it was realized that useful products could be produced only if cer tain additives were incorporated into polymers. With the help of these additives, when physically dispersed in a polymer matrix, it has been possible to improve stability against thermal, oxidative, UV, hydrolytic and biological degradation, mechanical properties, flammability, cost, and processibility of plastics. The enormous growth of the volume of plastics consumed by modern society, and new application areas for plastics, have created a demand for new, better additives and better understanding of their functions in polymer systems. As a result of these trends there is a need for sharing of information on progress achieved in the area of polymer additives among engineers and scientists of the plastics industry and academia. This book is based on expanded and updated papers originally presented at the International Symposium on Polymer Additives, which was held in Las Vegas, Nevada, and was sponsored by the American Chemical Society, Division of Polymeric Materials Science and Engi neering. The book is divided into five parts which cover advances in various areas of polymer additives. The first part is devoted to the progress in understanding of UV degradation and stabilization of various polymers. Oxidation degradation and stabilization of plastic materials is covered in the second part. New developments in the stabilization of PVC are presented in the third part.
Download or read book Aryl Diazonium Salts written by Mohamed Mehdi Chehimi and published by John Wiley & Sons. This book was released on 2012-07-10 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diazonium compounds are employed as a new class of coupling agents to link polymers, biomacromolecules, and other species (e. g. metallic nanoparticles) to the surface of materials. The resulting high performance materials show improved chemical and physical properties and find widespread applications. The advantage of aryl diazonium salts compared to other surface modifiers lies in their ease of preparation, rapid (electro)reduction, large choice of reactive functional groups, and strong aryl-surface covalent bonding. This unique book summarizes the current knowledge of the surface and interface chemistry of aryl diazonium salts. It covers fundamental aspects of diazonium chemistry together with theoretical calculations of surface-molecule bonding, analytical methods used for the characterization of aryl layers, as well as important applications in the field of electrochemistry, nanotechnology, biosensors, polymer coatings and materials science. Furthermore, information on other surface modifiers (amines, silanes, hydrazines, iodonium salts) is included. This collection of 14 self-contained chapters constitutes a valuable book for PhD students, academics and industrial researchers working on this hot topic.
Download or read book Ionic and Organometallic Catalyzed Organosilane Reductions written by Gerald L. Larson and published by John Wiley & Sons. This book was released on 2009-11-19 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ionic and Organometallic-Catalyzed Organosilane Reductions provides an up-to-date, comprehensive review of reductions with organosilanes. Both ionic and catalyst-mediated reaction types are included, with appropriate reference to reaction mechanisms where they have been elucidated. The text also provides a wide variety of organic functional group reductions by organosilicon hydrides, and includes a substantial discussion of asymmetric reductions. All known examples have been compiled in thirty-four easily scanned, comprehensive tables compiled from 809 original articles. This is a must-have reference book for all synthetic organic chemists working in academic and industrial laboratories.
Download or read book Silicon in Polymer Synthesis written by H.R. Kricheldorf and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon in Polymer Synthesis gives the first concise overview of silicon used for the synthesis and modification of polymers. The first section gives an introduction to the topic. The subsequent chapters detail the current status both from the basic research as well as from the industrial application points of view.
Download or read book Alkoxysilanes and the Consolidation of Stone written by George Wheeler and published by Getty Publications. This book was released on 2005 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stone is one of the oldest building materials, and its conservation ranks as one of the most challenging in the field. The use of alkoxysilanes in the conservation of stone can be traced as far back as 1861, when A. W. von Hoffman suggested their use for the deteriorating limestone on the Houses of Parliament in London. Alkoxysilane-based formulations have since become the material of choice for the consolidation of stone outdoors.^l This volume, the first to cover comprehensively alkoxysilanes in stone consolidation, synthesizes the subject's vast and extensive literature, which ranges from production of alkoxysilanes in the nineteenth century to the extensive contributions from sol-gel science in the 1980s and 90s. Included are a historical overview, an annotated bibliography, and discussions of the following topics: the chemistry and physics of alkoxysilanes and their gels; the influence of stone type; commercial and noncommercial formulations; practice; lab and field evaluation of service life; and recent developments. This book is designed for conservators, scientists, and preservation architects in the field of stone conservation and will also serve as an indispensable introduction to the subject for students of art conservation and historic preservation.
Download or read book Tribology of Natural Fiber Polymer Composites written by and published by Elsevier. This book was released on 2008-10-14 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental concerns are driving demand for bio-degradable materials such as plant-based natural fiber reinforced polymer composites. These composites are fast replacing conventional materials in many applications, especially in automobiles, where tribology (friction, lubrication and wear) is important. This book covers the availability and processing of natural fiber polymer composites and their structural, thermal, mechanical and, in particular, tribological properties. Chapter 1 discusses sources of natural fibers, their extraction and surface modification. It also reviews the thermal, structural, mechanical, spectroscopic and morphological properties of unmodified and chemically modified natural fibers such as sisal, jute, wood, bamboo and cotton together with their potential applications. Chapter 2 gives a brief introduction to the tribology of polymer composites and the role of fiber reinforcement and fillers in modifying their tribological properties. Further chapters discuss the chemical composition, physical structure, mechanical properties and tribological behaviour of polymer composites reinforced with sisal, jute, cotton and bamboo fibers. The tribological behaviour of wood polymer composites (WPCs) is also discussed. Tribology of natural fibre polymer composites is a useful reference guide for engineers, scientific and technical personnel involved in the development of natural fiber composites. In particular it will give an insight into mechanical properties and failure mechanisms in situations where wear, lubrication and friction are a problem. Examines the availability and processing of natural fiber composites and their structural, thermal, mechanical and tribological properties Explores sources of natural fibers, their extraction and surface modification as well as properties of chemically modified natural fibers Provides an overview of the tribology of polymer composites and the role of fiber reinforcement and filters in modifying tribological composites
